Search the Community

- Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.2.2-24922-4 - Loader version and model: Jun's Loader v1.04b DS918+ - Using custom extra.lzma: NO - Installation type: BAREMETAL - ASROCK Z370M PRO4 - i5-8600k - Giga PHY Intel® I219V - Additional comments: Reboot required

I have an Asrock z390 pro4 with Intel core i3 9100. Can't get either 918+, ds3615xs or The ds3617 with changes as per iG88(extra.lzma and two files from the pat file) to be detected with my onboard nic. Please help

Всем привет. Очень нужна помощь! Я собрал сервер: ASRock Z390 Pro4 с Intel® I219V INTEL S1151 Core i3-9100 DDR4 16 ГБ, 2666 МГц, Kingston HyperX Fury Black 8 ТБ Western Digital WD82PURZ * 6 шт. Использую загрузчик 1.03b для последней DSM_DS3615xs_24922.pat (vid, pid, mac, s/n отредактированы; кол-во HDD выставлено 6). После загрузки, сервер не виден в локальной сети. Что можно сделать, чтобы эта конфигурация заработала? Спасибо.

Hello. Help needed! I built the server: ASRock Z390 Pro4 with Intel® I219V INTEL S1151 Core i3-9100 DDR4 16GB 2666MHz Kingston HyperX Fury Black 8TB Western Digital WD82PURZ * 6 pcs. I use 1.03b loader for last DSM_DS3615xs_24922.pat (vid, pid, mac, s/n I edit). After loader loading, the server is not visible on the local network. What can I do to get this configuration working? Thanks.

Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.2.2-24922-update 4 - Loader version and model: JUN'S LOADER v1.04b - DS918+ - Using custom extra.lzma: YES (IG-88 v0.6) - Installation type: BAREMETAL - ASRock B250M Pro4 / Intel X520-DA1 / 4x WD Red 3TB / 2x Intenso nVME 120GB SSD - Additional comments: REBOOT REQUIRED. removed SSD Cache before the Upgrade, after Reboot recreated the Cache again.

Hi i have running fine with LSI LSI 9207-8i and a 2 port 1G card. But recently I changed the network card to a X550-T2 10G card, it caused the LSI crashed or not detected. If both are in, my hdd and volume will not show. but the 10G interfaces all ok. If I removed the 10G card, the LSI is ok. If I run the synology on top of esxi 6.7 I can detected both card. But after i passthru them, the LSI will crashed after sometime and become not passthru again. I changed to run bare metal, as long as the X550 card is in, my volume cant be detected, I only managed to get it detected once but after reboot is gone again. Any idea? how should I troubleshoot this? - DSM version prior update: DSM 6.2.2 - Loader version and model: v1.04b - 918+ - Using custom extra.lzma: NO - Installation type: BAREMETAL - mb: asrock z370m pro4 cpu: i7-8700 LSI 9207-8i X550-T2 network card Additional comments: volume not detected, LSI not working after change to X550-T2.

Hello, community! Happy New Year! Can you advise me! I am confused with bios and with network interfaces. I am considering two motherboards ASRock for a new server. These are: ASRock Z390 Pro4 and Z370 Pro4 with the Intel® I219V network interface. I will use the 1.03b loader. Will these motherboards work without problems (BIOS, LAN)? Will they start working the first time? Thanks. P.S. Recently, I installed DSM 6.2.2, and then U4 (loader 1.03b) on Dell 790 with the Intel® 82579LM network interface without any problems. Started working the first time, installing DSM from the Internet.

@The Chief прошу помощи. Пытаюсь создать том из nvme SSD. Делаю по вашему примеру, нашел его же на reddit, но после перезагрузки не появляется том и при выводе cat /proc/mdstat вижу, что после перезагрузки пропадает мной созданный md4. Уже пытался сделать это все с новой флешки и с новым HDD, как будто полностью ново-созданный xpenology. Результат тот же. Зачем мне это нужно - уже есть 10Gbe сеть и нужна xpenology с очень быстрым накопителем. Сейчас есть на другой системе несколько SATA SSD в RAID0 для большой скорости, но все равно 10Gbe нагружена только наполовину. Пытаюсь ускорить работу в своем проекте. Система: Asrock H370 Pro4 + i5 9400F + 2x8Gb DDR4 2666 Hynix + Samsung 970 EVO Plus nvme SSD

Вот у меня сейчас такой сервак: https://ca.pcpartpicker.com/list/xPHgb8 После нового года будет: https://ca.pcpartpicker.com/list/tGYGL2 Z370M-ITX/AC отличная мать с 6х SATA + 1 M.2 NVME / SATA. Я пока лучше материнки не видел по портам. I5-8400T отличный проц - по статистике догоняет 4790k: https://www.cpubenchmark.net/compare/Intel-i7-4790K-vs-Intel-i5-8400T/2275vs3260 Оверклоком я бы на NASе не занимался - надо чтобы машина тихо сидела и журчала. Тем более чтобы не тянула много електричества покупаем проц T версии.

Доброе. Если нужна виртуалка, то нужно 1-2 SSD под них. Следовательно и SATAы нужно 6. Для двух виртуалок памяти нужно 8+, т.к. в противном случае упрешься в нехватку. Я бы ставил 16 минимум. Хотя если на винде ничего особого не делать то можно и 8. У меня на ней крутится w2016s+1c+sql - 4 пользователя (1 по рдп). Корпус - стоит примерно 8-10т (с Hotswap). Если без - то тут проблема в том, что большинство корпусов расчитаны на 2-4 винта. И не забудь, что тебе нужно их обдувать. Желательно дуть на них, а не "отсасывать".... Корпус как у Olegin - оптимальный вариант, но редкость. Z370M-ITX/AC - неплохая, но я бы взял чуть подороже и с возможностью залочить проц на любую частоту т.к. нет турбо буста в хренолоджи и это будет возможность в дальнейшем разогнать i5, i7 (для будущего ап).

А такая ? Z370M-ITX/AC

Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.2.2-24922-update 3 - Loader version and model: JUN'S LOADER v1.03b - DS3615xs - Using custom extra.lzma: NO - Installation type: BAREMETAL - ASRock Z370M Pro4 / i3 8100 / LSI SAS 9211-8i (IT) / Intel X540-T2 dual 10 GBit NIC  - Additional comments: REBOOT REQUIRED

- Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.2.2-24922-3 - Loader version and model: Jun's Loader v1.04b DS918+ - Using custom extra.lzma: NO - Installation type: BAREMETAL - ASROCK Z370M PRO4 - i5-8600k - Giga PHY Intel® I219V - Additional comments: Reboot required

- Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.2.2-24922-2 - Loader version and model: Jun's Loader v1.04b DS918+ - Using custom extra.lzma: NO - Installation type: BAREMETAL - GigaByte Z370M DS3H - i3-8100 - HP NC360T NIC - Additional comments: No Reboot required

Long time user of Xpenology under ESXi on older hardware. Started a new baremetal build with new hardware and thought I'd share my experiences. Haven't been able to find anyone using the B365 chipset so thought I'd give it a go and report on functionality. CPU = Intel i5-9400 Motherboard = Asrock B365M Pro4 Micro ATX RAM = 16GB HyperX Fury 2666Mhz (2x 8GB) NIC = HP NC360T PCIe (Dual Intel NIC) USB = Sandisk Cruzer Fit 8GB Will be recycling old hardware in but not there yet, just validating new hardware. HBA = LSI 9201-16i 16 port PCIe (IT mode) Hard Drives = 8x 3TB Seagate Enterprise Drives, 4x 256GB SSD (Brand escapes me at the moment) Case = Fractal Node 804 The Good All basic functionality worked, out of box. Using 918+ 1.04b loader booted and performed install, no issues. UEFI boot works. Patched to latest build via GUI without issues. Powers off, reboots and WOL all working perfectly. (Had issues on some old hardware) Cold boots fast with no delays. (have read other experienced long boot times) Didn't need to tweak BIOS settings at all for first boot. I did subsequently go back and tuned some BIOS settings as follows. Disabled onboard NIC (I219V, knew it wasn't going to work), disabled onboard audio and wifi/bluetooth (no module installed anyway), disabled C1E state. CPU temp is monitored in Xpenology (Have had issues before with some hardware reading sensor) Seems to have full fan control with all options available but requires further validation. Again hasn't worked with some older hardware I've used but that may not be surprise to other users. CPU/Cores recognised and report accurately thanks to FOXBI's "ch_cpuinfo.tar" mod. VMM works and detected CPU & core correctly. Quick built a Win server 2016, powered on and booted fine. I only ran it for about 15 minutes but looked and worked well. With MB, CPU, RAM, PCIe NIC Card and 1 SSD connected and booted to Xpenology, seems to idle around 20w power usage but will confirm with more accurate meter. The Bad Onboard NIC is not recognised. As with all newer motherboards, the Intel I219V is not recognised, I knew it wouldn't, but have a stack of old PCIe Intel NICs so no issue for me. Hardware transcoding looks to be an issue. Cannot get /dev/dri folder to appear. Have done some BIOS settings with the GPU, to no avail. Have tried i915.alpha_support=1 in the GRUB file to no avail. To be fair, there seems to be little info on this setting and I'm probably putting it in the wrong location. I will troubleshoot further and advise. Was really a nice-to-have for me as I run separate Intel NUC for Plex, which handles the transcoding role well. That's probably it for now, from a couple of hours testing last night, so pretty pleased so far. If people are interested, I'll continue to update thread as further testing and commissioning occurs. Cheers.

I've just built a new box with an Asrock H270M Pro4 motherboard Intel x550-t2 I had issue's at first with the system crashing when transfering small files it turn out to be the firmware was v1.0 the card is supported but only with updated firmware. I got the card to work with bootloader 1.02 1.03 & 1.04 but if you use the ds918 I was unable to change the mtu so the transfer maxed out at 279 Mbps this is with 6 hdd's in raid 6 with 1.03 and ds3615 I get 540 Mbps.

Hi, Sorry for my noob question I really try to find out answer via serach bar but I still cant figure out how to get HDD Health info in XPEnology. I am runnung 2 virtual systems running in VMware 6.7 build on Juns loader 1.04b DS918+ properly but I cant figure out how to get health disk info from drives. I build both VM by Tutorial: Install DSM 6.2 on ESXi 6.7 and have latest version of DSM there... only diferences are drives controlers : 1.system passthrough LSI SAS3008 9300-8I flashed to IT mode. 2.system passthrough motherboard SATA controller from ASRock Z370M-ITX/AC (SMART enabled in bios) For both systems I m not able to get this info. Could you please help me what I should check or explain me why its not possible? I would be very happy for any answer or advice. PS: sorry for my bad english.

- Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.2.2-24922-2 - Loader version and model: Jun's Loader v1.04b DS918+ - Using custom extra.lzma: NO - Installation type: BAREMETAL - ASROCK Z370M PRO4 - i5-8600k - Giga PHY Intel® I219V - Additional comments: Reboot required

Hello, Thx for the new version. Not work on my configuration 😢 Loader 1.04b DS918+ DSM 2.2.2-24922 Update 2 ASROCK Z370M PRO4 - i5-8600K

I'm not quite sure on the period of time, but after I got home from work today, when I tried to connect to my NAS, the normal URL redirected to me a white screen. I tried using a few different browsers, but nothing. Synology Assistant couldn't find the NAS and the I couldn't access the contents of any mounted folders in Finder. I was able to see the names of my shared folders, but each folder showed 0 files. The same thing happened over the weekend as well. After doing a hard reboot, everything works as it should, and the notifications don't mention anything other than an improper shutdown from the hard reset. Any ideas on what could be wrong? Thanks! CPU: i5 7500 MB: ASRock H270M Pro4 Version: 6.2-23739 RAID: Dell H200 Perc Loader: Jun's 1.04b DS918+

First off, thanks to all the help I got in this forum! I haven't messed around with much yet, but the system seems to stable so far! CPU: i5 7500 MB: ASRock H270M Pro4 RAID: Dell H200 Perc Loader: Jun's 1.04b DS918+ I used this tutorial as my main point of reference. Xpenology Tools really made things easier as well! The few minor hiccups I had... - when flashing the H200, I used this tutorial, but got stuck until I stumbled onto this reddit thread. - when making a bootable USB with FREEDOS mentioned in the tutorial, my motherboard detected 2 boot entries on the USB, one UEFI and one USB. The UEFI takes you to the shell, the USB takes you to FreeDOS. - I couldn't find the MAC address through DOS/shell, but found that most manufacturers print it on a sticker on the edge of their board - be absolutely sure your NAS has a network connection when it comes time to install. B/c of the location of my NAS/workstation/monitors, I tried to share the network connection from my laptop via ethernet and couldn't for the life of me figure out what I couldn't see the NAS. Found out my ethernet port on my laptop is bad after hooking up a 30ft cat5 cable from the router in the living room to the office.

- Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.2.2-24922-1 - Loader version and model: Jun's Loader v1.04b DS918+ - Using custom extra.lzma: NO - Installation type: BAREMETAL - ASROCK Z370M PRO4 - i5-8600k - Giga PHY Intel® I219V - Additional comments: Reboot required

- Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.2.2-24922 / Jun's Loader v1.04b DS918+ - Loader version and model: Jun's Loader v1.04b DS918+ - Using custom extra.lzma: NO - Installation type: BAREMETAL - ASROCK Z370M PRO4 - i5-8600k - Giga PHY Intel® I219V - Additional comments: Reboot required

Salut ! Bah écoute je viens juste d'acheter la mienne : ASRock Z370M PRO4 avec un i5 8500 , et 8 GO de RAM, côté stockage c'est peu importe (ça n'influe pas au transcodage HW). j'ai un SSD pour les dockers, vm etc. et 4 disque de 4 to. Ca roule impec'.

Bonjour à tous, Voila j'ai un ancien i5 4460 avec carte mère etc. Je souhaite passer sur une nouvelle archi pour transcoder le 4K Est ce que vous savez si ASRock Z370M PRO4 et i3 8100 serait dans un premier temps compatible au niveau du LAN (c'est du intel) avec Xpenology et le loader 1.04B (pour DS918+). Et si e transcodage Hardware fonctionnerait .. En effet je ne trouve pas sur le forum si la transcodage hardware fonctionnerai avec cette machine (Actuellement le HW fonctionne chez moi sans sérial ). merci d'avance !!