jarugut Posted January 14, 2022 Share #226 Posted January 14, 2022 1 minute ago, AmiroGarry said: i am not an expert. Can I switch from 6.2.3 to DSM7 for a productive system or does that make no sense? if you apreciate your data maybe it's better that you keep in stable 6.2.3 Quote Link to comment Share on other sites More sharing options...
Aigor Posted January 14, 2022 Share #227 Posted January 14, 2022 (edited) 18 minutes ago, AmiroGarry said: i am not an expert. Can I switch from 6.2.3 to DSM7 for a productive system or does that make no sense? at this stage no, loader still in Alpha stage and it's not a good idea update on production system Edited January 14, 2022 by Aigor Quote Link to comment Share on other sites More sharing options...
AmiroGarry Posted January 14, 2022 Share #228 Posted January 14, 2022 Thanks Quote Link to comment Share on other sites More sharing options...
recoco Posted January 14, 2022 Share #229 Posted January 14, 2022 1 hour ago, chickey said: The compiled image is here https://github.com/pocopico/tinycore-redpill/blob/main/tinycore-redpill.v0.4.4.img.gz Got it! Thank you! I misunderstood it. I misunderstood as a v4.4 version! I can download the zip through I cannot git clone. Quote Link to comment Share on other sites More sharing options...
g4sho Posted January 14, 2022 Share #230 Posted January 14, 2022 (edited) 2 hours ago, pocopico said: @g4sho Can you please send me the output of lspci -nnq @pocopico lspci -nnq command is not available, I looked in bin and sbin for it, not there. here is the output. This is in relation to tiny pill diskstation I left off the q in -nnq this time, but I typed it several times and it was not available. Edited January 14, 2022 by g4sho Clarification Quote Link to comment Share on other sites More sharing options...
chickey Posted January 14, 2022 Share #231 Posted January 14, 2022 1 hour ago, loderunner said: After booting tc 0.4.4 on VmWare Workstation I've got only this ( I posted my vmware machine config above and the boot drive is setup for me like. Not sure if your on windows or linux but i found it best to put the vmdk provided by pocopico into the same vmware folder as the other vm machine files, saves issues with write permissions. I also had some issues with certain programs when unpacking the archive so maybe try another program. On linux gunzip has worked reliably for me. Quote Link to comment Share on other sites More sharing options...
loderunner Posted January 14, 2022 Share #232 Posted January 14, 2022 12 минуты назад, chickey сказал: I posted my vmware machine config above and the boot drive is setup for me like. Not sure if your on windows or linux but i found it best to put the vmdk provided by pocopico into the same vmware folder as the other vm machine files, saves issues with write permissions. I also had some issues with certain programs when unpacking the archive so maybe try another program. On linux gunzip has worked reliably for me. gunzip vmdk on ubuntu linux, copy it to windows with workstation and get th same result Quote Link to comment Share on other sites More sharing options...
chickey Posted January 14, 2022 Share #233 Posted January 14, 2022 Just now, loderunner said: gunzip vmdk on ubuntu linux, copy it to windows with workstation and get th same result you you looked at the console output for any errors by piping the a serial port out to a file? What version of workstation are you running? Quote Link to comment Share on other sites More sharing options...
loderunner Posted January 14, 2022 Share #234 Posted January 14, 2022 (edited) 7 минут назад, chickey сказал: you you looked at the console output for any errors by piping the a serial port out to a file? What version of workstation are you running? It is VMware® Workstation 15 Pro 15.5.6 all what I get in serial Edited January 14, 2022 by loderunner Quote Link to comment Share on other sites More sharing options...
chickey Posted January 14, 2022 Share #235 Posted January 14, 2022 5 minutes ago, loderunner said: It is VMware® Workstation 15 Pro 15.5.6 how to pipe serial out at workstation? I popped it in an earlier post but add a serial port and set the output to be a file and i found it best to place the file inside the vm dir. The second time you run it it'll ask if you wish to append or overwrite which is normal. Quote Link to comment Share on other sites More sharing options...
loderunner Posted January 14, 2022 Share #236 Posted January 14, 2022 7 минут назад, chickey сказал: I popped it in an earlier post but add a serial port and set the output to be a file and i found it best to place the file inside the vm dir. The second time you run it it'll ask if you wish to append or overwrite which is normal. boot steps is: Quote Link to comment Share on other sites More sharing options...
ozef Posted January 14, 2022 Share #237 Posted January 14, 2022 Hello, First i apologize if it has already been asked but i didn't found my answers. I'm trying to update my HP MicroServer GEN8 from 6.2.3 DS3617XS on 7.0.1 on DS3615XS. I got a few questions : - What is the default password of the "tc" user ? (tried empty one without success) - When i build i got an error about tools not installed (didn't see how to install that). Thank you by advance Quote Link to comment Share on other sites More sharing options...
loderunner Posted January 14, 2022 Share #238 Posted January 14, 2022 Только что, ozef сказал: Hello, First i apologize if it has already been asked but i didn't found my answers. I'm trying to update my HP MicroServer GEN8 from 6.2.3 DS3617XS on 7.0.1 on DS3615XS. I got a few questions : - What is the default password of the "tc" user ? (tried empty one without success) - When i build i got an error about tools not installed (didn't see how to install that). Thank you by advance maybe User: tc Password: P@ssw0rd like here https://xpenology.club/install-dsm-7-on-baremetal-or-vm/ 1 Quote Link to comment Share on other sites More sharing options...
ozef Posted January 14, 2022 Share #239 Posted January 14, 2022 (edited) il y a une heure, loderunner a dit : maybe User: tc Password: P@ssw0rd like here https://xpenology.club/install-dsm-7-on-baremetal-or-vm/ Thanks a lot ! I had to comment the line #[dpkg]="dpkg --version" # extract flashupdate in redpill-load/include/runtime.sh FYI : i had to modify the custom_user.json to add my additional HP ethernet macadress. But still got an error on installing the pat file. UPDATE : I had to format all my disks and revert to JUn's loader and on 6.2.3 Edited January 14, 2022 by ozef Quote Link to comment Share on other sites More sharing options...
pocopico Posted January 14, 2022 Author Share #240 Posted January 14, 2022 1 hour ago, g4sho said: @pocopico lspci -nnq command is not available, I looked in bin and sbin for it, not there. here is the output. This is in relation to tiny pill diskstation I left off the q in -nnq this time, but I typed it several times and it was not available. you can run the lspci -nnq once you are inside tinycore instead. Quote Link to comment Share on other sites More sharing options...
g4sho Posted January 14, 2022 Share #241 Posted January 14, 2022 @pocopico okay will do that now. Quote Link to comment Share on other sites More sharing options...
g4sho Posted January 14, 2022 Share #242 Posted January 14, 2022 18 minutes ago, pocopico said: you can run the lspci -nnq once you are inside tinycore instead. @pocopicoHere it is, it sees it at 05:00.0 lspci.txt Quote Link to comment Share on other sites More sharing options...
pocopico Posted January 14, 2022 Author Share #243 Posted January 14, 2022 (edited) 3 hours ago, g4sho said: @pocopicoHere it is, it sees it at 05:00.0 lspci.txt 24.17 kB · 8 downloads You will have better luck with the 3617 which runs kernel 4.4.180, which has newer modules for mpt3sas. EDIT: But still does not match the your PCI:ID alias. Edited January 14, 2022 by pocopico 1 Quote Link to comment Share on other sites More sharing options...
pocopico Posted January 14, 2022 Author Share #244 Posted January 14, 2022 4 hours ago, g4sho said: @pocopicoHere it is, it sees it at 05:00.0 lspci.txt 24.17 kB · 8 downloads @g4sho And everybody that is interested, the MPT3SAS driver has been updated to 22.00.00.00, please retry to create your loader with the new module. 1 Quote Link to comment Share on other sites More sharing options...
keasee Posted January 14, 2022 Share #245 Posted January 14, 2022 (edited) @ POCOPICO ! Thanks Pocopico for your excellent work! Now running 7.0.1 on hp prodesk 400 G2 mini with a SSD 860 ... ==> bought a new NVMe M.2 (SSD 980) and added it to the MB. The ssd disk will not be found .. .any drivers available an how to add them ( on grub?) ? best Keasee Edited January 14, 2022 by keasee Quote Link to comment Share on other sites More sharing options...
keasee Posted January 14, 2022 Share #246 Posted January 14, 2022 19 hours ago, Franks4fingers said: Do you need to be running 6.2.4 to be able to go to 7 or can you be on 6.2.3 and then still make that jump? it works by MIGRATION from 6.2.3 Quote Link to comment Share on other sites More sharing options...
JMRR Posted January 14, 2022 Share #247 Posted January 14, 2022 @pocopico is there any requirement to run this system? I have an Asrock J5005-itx, and in bios there arent many options to use. i folowed all steps but cant boot this distro. All 3 partitions show on bios but any one i choose to boot it flashs a screen fo a 1ms and returns to bios. I tried to burn image several times with Rufus and Win32diskImager and select 3 partition as active. Tested on all usb ports of mainboard, but it doesent boot. Is there any way to boot this distro? Quote Link to comment Share on other sites More sharing options...
xMiroRRside Posted January 14, 2022 Share #248 Posted January 14, 2022 6 минут назад, JMRR сказал: @pocopico is there any requirement to run this system? I have an Asrock J5005-itx, and in bios there arent many options to use. i folowed all steps but cant boot this distro. All 3 partitions show on bios but any one i choose to boot it flashs a screen fo a 1ms and returns to bios. I tried to burn image several times with Rufus and Win32diskImager and select 3 partition as active. Tested on all usb ports of mainboard, but it doesent boot. Is there any way to boot this distro? Try enabling legacy on the flash drive Advanced ->USB Configuration->Legacy USB Support Enable Legacy USB Support. AUTO option disables legacy support if no USB devices are connected. DISABLE option will keep USB devices available only for EFI applications. Quote Link to comment Share on other sites More sharing options...
rok1 Posted January 14, 2022 Share #249 Posted January 14, 2022 12 minutes ago, JMRR said: @pocopico is there any requirement to run this system? I have an Asrock J5005-itx, and in bios there arent many options to use. i folowed all steps but cant boot this distro. All 3 partitions show on bios but any one i choose to boot it flashs a screen fo a 1ms and returns to bios. I tried to burn image several times with Rufus and Win32diskImager and select 3 partition as active. Tested on all usb ports of mainboard, but it doesent boot. Is there any way to boot this distro? That board has UEFI only boot capabilities. I will tell you I've been able to boot that board fine with the older TTG 7.0.1 boot images I have built. I have not tried with the tinycore stuff yet Quote Link to comment Share on other sites More sharing options...
g4sho Posted January 14, 2022 Share #250 Posted January 14, 2022 (edited) 5 hours ago, pocopico said: @g4sho And everybody that is interested, the MPT3SAS driver has been updated to 22.00.00.00, please retry to create your loader with the new module. @pocopicoWE WiN! Thank you so much, that did the trick. You are one helluva programmer and troubleshooter. The community is blessed to have you. Keep it moving forward. Edited January 14, 2022 by g4sho Clarification 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.