Jump to content
XPEnology Community

JMRR

Member
  • Posts

    152
  • Joined

  • Last visited

Everything posted by JMRR

  1. @pocopico is there any requirement to run this system? I have an Asrock J5005-itx, and in bios there arent many options to use. i folowed all steps but cant boot this distro. All 3 partitions show on bios but any one i choose to boot it flashs a screen fo a 1ms and returns to bios. I tried to burn image several times with Rufus and Win32diskImager and select 3 partition as active. Tested on all usb ports of mainboard, but it doesent boot. Is there any way to boot this distro?
  2. - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.2.2 update4 - Loader version and model: Jun's v1.03b - DS3615xs - Using custom extra.lzma: Yes, v0.11 for 6.2.3, applyed just before update without reboot - Installation type: BAREMETAL - HP ProLiant Microserver Gen8 (Xeon 1265Lv2) - - Additional comment: (HP NC360T) and enabled the onboard NICs in BIOS.
  3. Cant help on that, from 6.2 update i couldnt compile drivers for tbs anymore. Maybe someone can help you. Sent from my iPad using Tapatalk
  4. - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.2.2-24922-1 - Loader version and model: JUN'S LOADER v1.03b - DS3615xs - Using custom extra.lzma: NO - Installation type: BAREMETAL - HP MICROSERVER GEN 8 + HP NC360T (dual ports nic) - Additional comments: Integrated nics disabled in bios, reboot required
  5. - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.2-23739 - Loader version and model: JUN'S LOADER v1.03b - DS3615xs - Using custom extra.lzma: NO - Installation type: BAREMETAL - HP Gen8 Microserver - Additional comment: Internal NIC disabled, added a HP NC360T dual port NIC.
  6. JMRR

    DSM 6.2 Loader

    you have 2 options - mount your loader like you did first time, edit grub and comment the entries you dont want, reflash pen drive and boot like a new instalation; - the second option is editing on running machine: access your mounted path, edit grub and comment out the line you dont want.
  7. JMRR

    DSM 6.2 Loader

    i think you can comment all other entries leaving only the option you want.
  8. dont think so, maybe you are having some input signal problems?
  9. yes i was was using asrock j5005 and 1.04b/918+, on a original serial number and mac address. transcoding was activated and working exelent. but i tried to update dsm verstion to 6.2.2 and fu*ed up my instalation, so had to start over a new instalation on a HPE microserver gen 8, on 3615 loader, and migrated all data. now my main tvh instalation is ubuntu minimal on asrock j5005, and only one instalations to all devices with vaapi enabled. my dsm instalations is on HPE MS gen8. i few days back i tried to compile tbs drivers to 918+, but didnt had success. it would be funny to have again all setups combined on same macinhe( dsm+dvb and tvh on docker).maybe some one can help. on a side note, on this docker image its very easy to compile tvh with only modules you use. i compile mine withou satip server, without hdhomerun, no cas.....and removed a lot of other things a didnt use, its like a light instalation, try this as next step if your initial setups works as you want.
  10. Docker platform manages cpu architecture, you dont need to worry about that. here is all you need to configure tvh inside docker on synology. https://hub.docker.com/r/linuxserver/tvheadend/ Just install docker pakage, and my sugestion is to manually run the create comand: adapt this exemple to your needs: docker create \ --name=tvheadend \ -e PUID=0 \ #verify on your syno root id mine is 0 -e PGID=0 \ #verify on your syno root id mine is 0 -e TZ=Europe/London \ #adapt for your location -e RUN_OPTS=--satip_xml http://ip_of_satip_source:port/desc.xml \ #optional for me i used satip from external source, so i need to point in here the start up comand of tvheadend to point for satip server -p 9981:9981 \ -p 9982:9982 \ # i dont use htsp, my is just an iptv server -p 9983:9983 \ # i dont use satip as server, just as client, so no need to map this port -v <path to data>:/config \ #its beter to save config outside docker , so any upgrade dont delete config. my example( -v /volume1/docker/tvheadend/config :/config) -v <path to recordings>:/recordings \ #same thing for recordings.my example( -v /volume1/docker/tvheadend/recordings 😕recordings) --device /dev/dri:/dev/dri \ #if you have transcoding capable device map this(this enables vaapi on tvheadend) --device /dev/drb:/dev/dvb \ #if no dvb device present remove, i dont have. --restart unless-stopped \ linuxserver/tvheadend and thats it, tvh will be available on port 9981. ps:uninstall tvh package first to eliminate port conflit. i use 2 instalations of tvh, on on another machine(generic computer) with tbs dvb input device, that servers all tvs on my house by htsp. the other instalation is on synology just as iptv to when im outside my house, and want to watch television, on computer/ipad/mobile. this one is vaapi transcoding capable, so doesent use to much network bandwith. this second tvh instalation is conected to first tvh instalation by satip or iptv. i tested both and prefer iptv. epg works the same way.
  11. Try tvheadend from linuxserver.io on docker. It has vaapi enabled, and all libraries ready. On creating docker comand you just need to map yout dvb device, to be available inside docker, simple as that. They have all steps on their site, and its very simple. Sent from my iPad using Tapatalk
  12. Outcome of the update: FAILED DSM version prior to update: DSM 6.2.1-23824U6 Loader version and model: Jun v1.04b - DS918 Using custom extra.lzma: NO Installation type: BAREMETAL - Asrock J5005-ITX Additional comments: No network
  13. I use mac and sn from an RS model and it works. Sent from my iPad using Tapatalk
  14. JMRR

    DSM 6.2 Loader

    if you dont mind using top gives 512 chars, the remain could be screenshot. top -b -n1 -w512 | grep ffmpeg > topoutput.txt the last part could be screenshots thanks in advance.
  15. JMRR

    DSM 6.2 Loader

    its the full strings that htop show. Some parameters i have to adjust, like location of video, volumes... On htop you have someting like: /var/packages/VideoStation/target/bin/ ffmpeg -ss 0.000 xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx i need all parameters.
  16. JMRR

    DSM 6.2 Loader

    do you have the videostation ffmpeg full parameters string? i would like to test on a diferent ffmpeg instalation.
  17. @Olegin did you configured anything on bios about graphics? On my instalation, codecs are active and /dev/dri as entries, but if i try to encode using vaapi, the output files are always only with sound. root@nas:~# ls -al /dev/dri total 0 drwxrwxrwx 2 root root 80 Feb 26 18:47 . drwxr-xr-x 14 root root 18900 Mar 9 22:57 .. crw-rw-rw- 1 root root 226, 0 Feb 26 18:47 card0 crw-rw-rw- 1 root root 226, 128 Feb 26 18:47 renderD128 Using ffmpeg from repo: /var/packages/ffmpeg/target/bin/ffmpeg -vaapi_device /dev/dri/renderD128 -i /volume1/downloads/twd.ts -vf 'format=nv12,hwupload,scale_vaapi=w=1920:h=1080' -sn -c:v h264_vaapi -qp 20 -bf 2 -c:a aac -tune zerolatency -f matroska /volume1/downloads/test3.mkv Using VideoStation ffmpeg /var/packages/VideoStation/target/bin/ffmpeg -vaapi_device /dev/dri/renderD128 -i /volume1/downloads/twd.ts -vf 'format=nv12,hwupload,scale_vaapi=w=1920:h=1080' -sn -c:v h264_vaapi -qp 20 -bf 2 -c:a aac -tune zerolatency -f matroska /volume1/downloads/test3.mkv Output in any case: Input #0, mpegts, from '/volume1/downloads/twd.ts': Duration: 00:42:00.56, start: 43931.504333, bitrate: 4841 kb/s Program 1 Metadata: service_name : FOX HD service_provider: SID FOX HD Stream #0:0[0x192d]: Video: h264 (Main) ([27][0][0][0] / 0x001B), yuv420p(tv, bt709, top first), 1920x1080 [SAR 1:1 DAR 16:9], 25 fps, 50 tbr, 90k tbn, 50 tbc Stream #0:1[0x192e](por): Audio: mp2 ([4][0][0][0] / 0x0004), 48000 Hz, stereo, s16p, 192 kb/s Stream mapping: Stream #0:0 -> #0:0 (h264 (native) -> h264 (h264_vaapi)) Stream #0:1 -> #0:1 (mp2 (native) -> aac (native)) Output #0, matroska, to '/volume1/downloads/test3.mkv': Metadata: encoder : Lavf58.20.100 Stream #0:0: Video: h264 (h264_vaapi) (High) (H264 / 0x34363248), vaapi_vld, 1920x1080 [SAR 1:1 DAR 16:9], q=-1--1, 25 fps, 1k tbn, 25 tbc Metadata: encoder : Lavc58.35.100 h264_vaapi Stream #0:1(por): Audio: aac (LC) ([255][0][0][0] / 0x00FF), 48000 Hz, stereo, fltp, 128 kb/s Metadata: encoder : Lavc58.35.100 aac frame= 2134 fps=142 q=-0.0 Lsize= 1395kB time=00:01:26.76 bitrate= 131.7kbits/s speed=5.76x video:0kB audio:1353kB subtitle:0kB other streams:0kB global headers:0kB muxing overhead: 3.088716% I think the device is present but not acessible. Do you have any idea? Ps: i did not upgraded bios on Asrock J5005-itx
  18. I did one clean install on one brand new ssd, and shutdown and reboot didnt work either. The migration was the last think i did, but the problem came from clean install too. Sent from my iPad using Tapatalk
  19. Folowed your tuturial, instaled on askock J5005-itx with 4gb ram(i need more i know), valid sn+mac from one rs model. Migrate dsm from esxi(hdd raid 1 configuration in rdm mode), everithing went smooth. /dev/dri is in place, and codecs is activated. This combo is an amazing setup for dsm. The only thing doesent work is reboot or shutdow. I use bios 1.0 i think, its beter to upgrade or doesent mater? Sent from my iPad using Tapatalk
  20. JMRR

    DSM 6.2 Loader

    Try another nic adapter on esxi Sent from my iPhone using Tapatalk
  21. Folowed this tuturial to update my installation from dsm 6.1 on ESXi 6.7, and almost everything went well. The only problem i want to share is that my disks are RDM, and on esxi RDM cannot be maped to sata controler. Just added scsi controler, add RDM disks to scsi and set in vm bios boot to sata controler, otherwise dsm wont boot(predefined boot will be scsi).
  22. Because its a virtualized layer, you can only do that if you passthrouh the sata controler, that way, dsm will use disks with direct access to hardware. Evem rdm wont work because its well a pointer to a maped disk. If you realy need firts read about passttrough, and all implications. Sent from my iPad using Tapatalk
  23. - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.1.6-15266 - Loader version and model: JUN'S LOADER v1.02b - DS3615xs - Using custom extra.lzma: NO - Installation type: VM - VMWARE EXSI - HP Gen8 Microserver - Additional comments: NO REBOOT REQUIRED
×
×
  • Create New...