Aigor Posted February 1, 2022 Share #3626 Posted February 1, 2022 10 minutes ago, plarkass said: Hello everyone, Stupid case butafter updating my synology to last 7.0.1 my acess is blocked. No any password in serial, web and SSH. Someone have a way to reset or open it again ? Try to access via serial using root and no password Link to comment Share on other sites More sharing options...
plarkass Posted February 1, 2022 Share #3627 Posted February 1, 2022 I tried and it's the same.In the past we Can use resetuser=admin but it 's not workingEnvoyé de mon KB2003 en utilisant Tapatalk Link to comment Share on other sites More sharing options...
IG-88 Posted February 1, 2022 Share #3628 Posted February 1, 2022 1 hour ago, plarkass said: Stupid case butafter updating my synology to last 7.0.1 my acess is blocked. No any password in serial, web and SSH. what version did you came from? vm or baremetal? if you have access to serial then you should see a log when booting up, anything special like errors, drivers not loading? whats the loader? if you just updated from 6.2.3 to 7.0.1 you would either need to undo the unfinished update (and keep the old loader) or continue with a new redpill loader Link to comment Share on other sites More sharing options...
Amoureux Posted February 1, 2022 Share #3629 Posted February 1, 2022 After boot up with flash drive from USB3 port, I've got next error in log [ 2.629777] redpill: module verification failed: signature and/or required key missing - tainting kernel Link to comment Share on other sites More sharing options...
plarkass Posted February 1, 2022 Share #3630 Posted February 1, 2022 Il y a 3 heures, IG-88 a dit : what version did you came from? vm or baremetal? if you have access to serial then you should see a log when booting up, anything special like errors, drivers not loading? whats the loader? if you just updated from 6.2.3 to 7.0.1 you would either need to undo the unfinished update (and keep the old loader) or continue with a new redpill loader Hi, From version 7.0-41890 to 7.0.1-42218. From loader tiny core to tiny core. How I can undo install? I can provide serial log if needed Link to comment Share on other sites More sharing options...
rok1 Posted February 2, 2022 Share #3631 Posted February 2, 2022 14 hours ago, pipsen said: Did anybody already succeed to compile kernel modules for DSM 7.0.1 for lm-sensors? hwmon-vid.ko nct6775.ko Here are only modules for DSM 6.2.3: See here: https://github.com/Entware/Entware/wiki/Install-on-Synology-NAS Link to comment Share on other sites More sharing options...
Aigor Posted February 2, 2022 Share #3632 Posted February 2, 2022 10 hours ago, Amoureux said: After boot up with flash drive from USB3 port, I've got next error in log [ 2.629777] redpill: module verification failed: signature and/or required key missing - tainting kernel It's normal, you can ignore Link to comment Share on other sites More sharing options...
falbor Posted February 2, 2022 Share #3633 Posted February 2, 2022 On 9/4/2021 at 12:24 PM, tocinillo2 said: Compiled 7.0.1 with last BSP patch and works perfect https://drive.google.com/file/d/1CqqhO-TBdwOff0dH54iP-XPdrhzgvtNR/view?usp=sharing - Add UEFI support. - Deleted twice EFI folder. - Fixed SynoBoot_EFI place. - Compiled with last BSP Patch for 7.0.1. - Insmod efi_gop into EFI. - Tested with Baremetal and works fine (Astock 3455-ITX). - After installation (the reboot process can take 15-20 minutes) you have to install File Station manually: https://www.synology.com/en-us/support/download/DS918+#system (select DSM 7.0), find and download File Station SPK and install it in Package Center. Hi, could someone make available again the version of the .img file for UEFi? Thank you. Link to comment Share on other sites More sharing options...
dhirenmehta Posted February 2, 2022 Share #3634 Posted February 2, 2022 On 1/27/2022 at 6:15 PM, NoFate said: guys, is there something wrong with the 6.2.4 loader? I have an Hp Gen 8 , with esxi, the bootlader is on sata disk 0:0 , my extra hard disk is at sata disk 0:0 i have below configured : "SataPortMap": "2", "DiskIdxMap": "00" if i do this : sudo ./rploader.sh build bromolow-7.0.1-42218 i can perfect install a DSM 7 system, it works perfect had it running for a few days, during .pat upload the installed told me DSM is going to be installed on DISK 2 i do the exact same process, now with this command, a clean host in esxu sudo ./rploader.sh build bromolow-6.2.4-25556 i upload that specific pat file, again i get the message that it will install on disk 2 , it completes to 100% i do a reboot, but its back at the setup start again?? for a new .pat file upload? whats wrong? After this reboot, i'm back at point 1 what could be wrong? Any chances you could share your VM config that you used for your DSM 7 build? I got a HP Microserver Gen 8 also, running ESXi 6.5 U3; spent most of yesterday trying to tinker and just couldn't get it to install. Thanks in advance! Link to comment Share on other sites More sharing options...
NoFate Posted February 2, 2022 Share #3635 Posted February 2, 2022 Hey, just using 1 sata for the boot image, and another image for the disk, nothing special.... .SataPortMap": "2", "DiskIdxMap": "00" Link to comment Share on other sites More sharing options...
synoxpe Posted February 3, 2022 Share #3636 Posted February 3, 2022 On 8/16/2021 at 9:26 PM, flyride said: Unless SMART requirements suddenly changed with DSM 7 this is a red herring. DSM will always attempt to pull SMART data, but the only things that I have seen that actually rely on it are Cache health and RAIDF1. The log errors you show have been there all along. Syno does customize the SMART code, and hardcodes for SCSI queries even though the underlying drives are usually SATA. This causes issues with certain controllers that have been manifested in various ways through the different DSM versions. Some additional info here: https://xpenology.com/forum/topic/12391-nvme-optimization-baremetal-to-esxi-report/?tab=comments#comment-88690 https://xpenology.com/forum/topic/29581-suppress-virtual-disk-smart-errors-from-varlogmessages/ Also: Check your device for appropriate Syno disk tagging using udevadm. If it is a usable disk it should return SYNO_DEV_DISKPORTTYPE=SATA # udevadm info /dev/sdx Is 16GB large enough to create a Storage Pool on DSM7? Apologies for resurrecting an old thread. I've 918+ running (4 HDDs as SATA passthrough) successfully on proxmox, only gripe being fake SMART info. Keen to discuss how to fix SYNO_DEV_DISKPORTTYPE=UNKNOWN: root@ds918p:~# udevadm info /dev/md0 P: /devices/virtual/block/md0 N: md0 E: DEVNAME=/dev/md0 E: DEVPATH=/devices/virtual/block/md0 E: DEVTYPE=disk E: MAJOR=9 E: MINOR=0 E: SUBSYSTEM=block E: SYNO_DEV_DISKPORTTYPE=UNKNOWN E: SYNO_INFO_PLATFORM_NAME=apollolake E: SYNO_KERNEL_VERSION=4.4 E: SYNO_SUPPORT_XA=no E: TAGS=:systemd: E: USEC_INITIALIZED=685493 Link to comment Share on other sites More sharing options...
Hackaro Posted February 3, 2022 Share #3637 Posted February 3, 2022 On 2/1/2022 at 5:54 PM, Amoureux said: who knows how fix it ? @Amoureux as we share the same Baremetal Hardware, could you be so kind to give details of your red-pill 7.0.1u2 make process? Thanks! Link to comment Share on other sites More sharing options...
Amoureux Posted February 3, 2022 Share #3638 Posted February 3, 2022 (edited) 14 минуты назад, Hackaro сказал: @Amoureux as we share the same Baremetal Hardware, could you be so kind to give details of your red-pill 7.0.1u2 make process? Thanks! Download redpill-helper by @haydibe Fill in the user_config.json Build loader for your hardware Flash image which you got in previous step Boot up with new loader Edited February 3, 2022 by Amoureux Link to comment Share on other sites More sharing options...
shibby Posted February 5, 2022 Share #3639 Posted February 5, 2022 On 2/3/2022 at 2:39 PM, Amoureux said: SW: DS918+; RedPill Loader; DSM 7.0.1-42218 Update 2 do you had to make new redpill for 42218 Update 2? Or you used the same from 42218? Link to comment Share on other sites More sharing options...
Amoureux Posted February 5, 2022 Share #3640 Posted February 5, 2022 51 минуту назад, shibby сказал: do you had to make new redpill for 42218 Update 2? Or you used the same from 42218? you can use the one you have 1 Link to comment Share on other sites More sharing options...
shibby Posted February 5, 2022 Share #3641 Posted February 5, 2022 On 2/3/2022 at 2:25 PM, Hackaro said: as we share the same Baremetal Hardware, could you be so kind to give details of your red-pill 7.0.1u2 make process? Thanks! or you can use tinycore-redpill from @pocopico https://xpenology.club/install-dsm-7-on-baremetal-or-vm/ should be easier way to build redpill for yuor baremetal. Link to comment Share on other sites More sharing options...
Kwn_nos Posted February 6, 2022 Share #3642 Posted February 6, 2022 Hi members, I would like to share my experience. I have HPE micro Gen10 and I have installed 7.0.1 with update2 without issues, just using tinycore. Just worth mentioning after the succesfull installation, bios boot order changed from the USB to the installation disk. After fixing the boot order, I can load the OS. Thank you @pocopico for the tinycore. Link to comment Share on other sites More sharing options...
Messenger Posted February 7, 2022 Share #3643 Posted February 7, 2022 I migrate my n54l today. Someone got wakeonlan work and which steps to do? Link to comment Share on other sites More sharing options...
bateau Posted February 7, 2022 Share #3644 Posted February 7, 2022 I apologize for not reading all of this thread, but has anyone attempted migration from VM with Jun’s loader and DSM 6 to redpill? I’m keen to experiment with red pill in a separate VM from my “production”, but eventually would need to migrate disk array. I suppose it may be as simple as pointing redpill VM at the disks and letting it “adopt” then the way DSM does when you switch between native Synology products. Link to comment Share on other sites More sharing options...
Next Posted February 7, 2022 Share #3645 Posted February 7, 2022 Hi all, What are you using Proxmox or ESXI or Baremetal? How to update the img file on a Proxmox or ESXI? I'm using a baremetal now for a few years and always made a new USB stick when it was necessary to update DSM. But I don't know how it works on a Proxmox or ESXI? Thanks! Link to comment Share on other sites More sharing options...
ngsupb Posted February 8, 2022 Share #3646 Posted February 8, 2022 On 2/7/2022 at 1:21 AM, Kwn_nos said: Hi members, I would like to share my experience. I have HPE micro Gen10 and I have installed 7.0.1 with update2 without issues, just using tinycore. Just worth mentioning after the succesfull installation, bios boot order changed from the USB to the installation disk. After fixing the boot order, I can load the OS. Thank you @pocopico for the tinycore. How did you install u2? Tinycore installs 7.0.1 for me without update 2 Link to comment Share on other sites More sharing options...
aportnov Posted February 8, 2022 Share #3647 Posted February 8, 2022 Hello everyone. Tell me if it is possible to put a Version: 7.0.1-42218 Update 2 by updating Version: 7.0.1-42218 directly from the DSM system manually? Or do I need to reassemble the bootloader and install it with a new pat? Fix the answer in the header, I think a lot of people will ask. Link to comment Share on other sites More sharing options...
Messenger Posted February 8, 2022 Share #3648 Posted February 8, 2022 The wakeonlanscript under /usr/local/etc/rc.d which works since DSM 5 doesnt work anymore. Someone know how to fix it (HP N54l) under DSM 7? #!/bin/sh case $1 in start) if [ -f /var/packages/shutdown_script/DSShutdown.sh ]; then /var/packages/shutdown_script/DSShutdown.sh & fi ;; stop) if [ -f /var/tmp/shut.down ]; then rm /var/tmp/shut.down fi ifconfig eth0 down ;; *) echo "Usage: $0 [start|stop]" ;; esac S99ZZZ_Shutdown.sh Link to comment Share on other sites More sharing options...
titoum Posted February 8, 2022 Share #3649 Posted February 8, 2022 41 minutes ago, Messenger said: The wakeonlanscript under /usr/local/etc/rc.d which works since DSM 5 doesnt work anymore. Someone know how to fix it (HP N54l) under DSM 7? #!/bin/sh case $1 in start) if [ -f /var/packages/shutdown_script/DSShutdown.sh ]; then /var/packages/shutdown_script/DSShutdown.sh & fi ;; stop) if [ -f /var/tmp/shut.down ]; then rm /var/tmp/shut.down fi ifconfig eth0 down ;; *) echo "Usage: $0 [start|stop]" ;; esac S99ZZZ_Shutdown.sh 297 B · 0 downloads why dont you use the std wakonlan functionnality of DSM ? it is under the configuration panel Link to comment Share on other sites More sharing options...
Messenger Posted February 8, 2022 Share #3650 Posted February 8, 2022 1 hour ago, titoum said: why dont you use the std wakonlan functionnality of DSM ? it is under the configuration panel is activated but doesn´t work. So think for n54l the script is neede but deprecated atm. Link to comment Share on other sites More sharing options...
Recommended Posts