RedPill - the new loader for 6.2.4 - Discussion

jumkey · February 26, 2022

念念不忘必有回响

DS920+ and new PortMapping ext(redpill-dtb)

https://github.com/jumkey/redpill-load/commit/845c9dd4a86eaf38186a2f062388127a6be37eef

RedwinX · February 27, 2022

On 2/26/2022 at 5:40 AM, jumkey said:

念念不忘必有回响

DS920+ and new PortMapping ext(redpill-dtb)

https://github.com/jumkey/redpill-load/commit/845c9dd4a86eaf38186a2f062388127a6be37eef

Did you think itt can work with a i7-8700 or i5-8500t ? Cannot test right know, but 8th gen is older than geminilake so...

IG-88 · February 27, 2022

2 hours ago, RedwinX said:

Did you think itt can work with a i7-8700 or i5-8500t ? Cannot test right know, but 8th gen is older than geminilake so...

the driver in all the 4.4 kernel source based system is the same, synology introduced the driver in 6.2.3 for 920+

we have some results and listing whats supported here

https://xpenology.com/forum/topic/28321-driver-extension-jun-103b104b-for-dsm623-for-918-3615xs-3617xs/

8th gen should work ootb with the driver synology delivers, up to 10th is partly proven with a patched driver and i just released new testing drivefor all cpu's up to 12th gen (code still the same, the id's are just mapped to the latest code in the old driver synology has)

if they release a jasper or elkhard lake system with intel qsv support (like a 922+?) then they will have to use a more recent i915 driver and we will presumable be able to have much better cpu support with that one

Edited February 27, 2022 by IG-88

RedwinX · February 27, 2022

10 minutes ago, IG-88 said:

the driver in all the 4.4 source based system is the same, synology introduced the driver in 6.2.3 for 920+

we have some results and listing whats supported here

https://xpenology.com/forum/topic/28321-driver-extension-jun-103b104b-for-dsm623-for-918-3615xs-3617xs/

8th gen should work ootb with the driver synology delivers, up to 10th is partly proven with a patched driver and i just released new testing drivefor all cpu's up to 12th gen (code still the same, the id's are just mapped to the latest code in the old driver synology has)

if they release a jasper or alkhard lake system with intel qsv support (like a 922+?) then they will have to use a more recent i915 driver and we will presumable be able to have much better cpu support with that one

Understood. Thx for explaination. Basic img (without any driver) works with 918+ img on my baremetal (i7-8700). Not working with the same img 920+.

That's my previous question. You cannot use a cpu older than Haswell to be working with 918+. I was thinking that's the same thing with Geminilake. I cannot have serial port on this baremetal, cannot see what's not working

Edited February 27, 2022 by RedwinX

IG-88 · February 27, 2022

1 hour ago, RedwinX said:

Not working with the same img 920+.

cant say much about something that was introduces in a development tree just a week ago, dont expect anything to work in that state - remind the forum branch we are in - dev-corner, imho there is no reason to even have a 920+ now, nothing new or extra with that

one of the reasons it might not work could be i915 firmware, in dsm there is only whats needed for that specific hardware, the driver in dsm has the capabilities but only when the firmware is also present, you could test that with the firmware i have in this (dont use the driver, just copy the firmware to you system and reboot)

https://xpenology.com/forum/topic/48743-drivers-extension-for-redpill-request-for-comments-drivers-packages/?do=findComment&comment=268029

or you can extract the firmware from the extra.lzma i made for 6.2.3

https://xpenology.com/forum/topic/28321-driver-extension-jun-103b104b-for-dsm623-for-918-3615xs-3617xs/

2 hours ago, RedwinX said:

You cannot use a cpu older than Haswell to be working with 918+. I was thinking that's the same thing with Geminilake.

not tested but i would expect it to be that way, you can read about that limit here

https://xpenology.com/forum/topic/13333-tutorialreference-6x-loaders-and-platforms/

"...

** FMA3 instruction support required. All Haswell Core processors or later support it. Only a select few Pentium, and no Celeron CPUs do.

** Piledriver is believed to be the minimum AMD CPU architecture to support the DS916+ and DS918+ DSM platforms.

..."

2 hours ago, RedwinX said:

I cannot have serial port on this baremetal, cannot see what's not working

that depends on the hardware you use, if you have a pcie slot free you could (as long as its with kernel 4.4 like 918+ on 6.2 or 3617/918+ on 7.0)

WCH CH382 based card should work as comport in dsm (i have not tested that with 7.0 but i dont see a reason why it should have changed)

https://xpenology.com/forum/topic/36505-serial-port-com1-stages-of-operation/

can still be bought cheap for 10-15 bugs

https://www.amazon.com/Express-Adapter-Expansion-Desktop-Computer/dp/B08SM5F2DJ/

AlexFullmoon · February 28, 2022

A minor question about DSM 7 (since I'm not sure anywhere else on forum fits). I want to plug in USB UPS.

Yes, I know Synology dropped USB support. I've tried a couple ways to enable some USB devices, but apparently they are for wireless dongles only. Or something. As lsusb shows only loader flash.

|__usb1          1d6b:0002:0310 09  2.00  480MBit/s 0mA 1IF  (ehci_hcd 0000:00:12.2) hub
|__usb2          1d6b:0002:0310 09  2.00  480MBit/s 0mA 1IF  (ehci_hcd 0000:00:13.2) hub
  |__2-3         f400:f400:1100 00  2.00  480MBit/s 500mA 1IF  (HP v165w AA00000000006633)
|__usb3          1d6b:0002:0310 09  2.00  480MBit/s 0mA 1IF  (ehci_hcd 0000:00:16.2) hub

How would I check what drivers I need? Running baremetal N54L.

That, of course, if Synology hasn't dropped generic USB UPS protocol as well...

IG-88 · February 28, 2022

1 hour ago, AlexFullmoon said:

That, of course, if Synology hasn't dropped generic USB UPS protocol as well..

no of course not, or would not be able to even us a usb flash driver or usb HDD for backup

they finaly removed already not maintained stuff like dvb or wifi usb support (along with usbserial, audio and bluetooth)

they did not support newer wifi dongles for years

back to UPS:

https://kb.synology.com/en-nz/DSM/help/DSM/AdminCenter/system_hardware_ups?version=7

https://www.synology.com/en-global/compatibility?search_by=category&category=upses&p=1&change_log_p=1

Edited February 28, 2022 by IG-88

dolbycat · February 28, 2022

Thank you, jumkey, tossp

I also succeeded in DS920+. ( asrock j5040 )

Realtech LAN recognized and Intel LAN Card failed to recognize.
Only two of the four main board SATA ports recognized HDD.

Edited February 28, 2022 by dolbycat

jumkey · March 1, 2022

3 hours ago, dolbycat said:

Thank you, jumkey, tossp

I also succeeded in DS920+. ( asrock j5040 )

Realtech LAN recognized and Intel LAN Card failed to recognize.
Only two of the four main board SATA ports recognized HDD.

did you create your own dtb file？

dolbycat · March 1, 2022

10 minutes ago, jumkey said:

did you create your own dtb file？

1) https://github.com/tossp/redpill-tool-chain
2) geminilake_user_config.json

{
"extra_cmdline": {
"pid": "XXXXXX",
"vid": "XXXXXX",
"sn": "XXXXXXXXXXX",
"mac1": "XXXXXXXXXXXX",
"DiskIdxMap": "000402",
"SataPortMap": "222",
"SasIdxMap": "0"
},
"synoinfo": {
"internalportcfg" : "0xffff",
"maxdisks" : "16"
},
"ramdisk_copy": {}
}

jumkey · March 1, 2022

run cat /sys/block/sataX/device/syno_block_info

X 1-4

then create your own dtb file

dolbycat · March 1, 2022

5 hours ago, jumkey said:

run cat /sys/block/sataX/device/syno_block_info

X 1-4

then create your own dtb file

I don't know how to create a dtb file.
because I'm a beginner

jumkey · March 1, 2022

48 minutes ago, dolbycat said:

I don't know how to create a dtb file.
because I'm a beginner

https://github.com/jumkey/redpill-load/blob/develop/redpill-dtb/README.md

garciahelp · March 1, 2022

I installed the DSM 7 (DS918+ 7.0.1-42218 Update 2) on my baremetal on my ASROCK N3150ITX via the tiny core loader

and have nearly the same errors as Amoureux on post post.

root@DS918_N3150:/# lspci -nnq
0000:00:00.0 Host bridge [0600]: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series SoC Transaction Register [8086:2280] (rev 21)
0000:00:02.0 VGA compatible controller [0300]: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Integrated Graphics Controller [8086:22b1] (rev 21)
0000:00:13.0 SATA controller [0106]: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series SATA Controller [8086:22a3] (rev 21)
0000:00:14.0 USB controller [0c03]: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series USB xHCI Controller [8086:22b5] (rev 21)
0000:00:1a.0 Encryption controller [1080]: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series Trusted Execution Engine [8086:2298] (rev 21)
0000:00:1c.0 PCI bridge [0604]: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series PCI Express Port #1 [8086:22c8] (rev 21)
0000:00:1c.1 PCI bridge [0604]: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series PCI Express Port #2 [8086:22ca] (rev 21)
0000:00:1c.2 PCI bridge [0604]: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series PCI Express Port #3 [8086:22cc] (rev 21)
0000:00:1c.3 PCI bridge [0604]: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series PCI Express Port #4 [8086:22ce] (rev 21)
0000:00:1f.0 ISA bridge [0601]: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series PCU [8086:229c] (rev 21)
0000:00:1f.3 SMBus [0c05]: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx SMBus Controller [8086:2292] (rev 21)
0000:03:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 11)
0000:04:00.0 SATA controller [0106]: ASMedia Technology Inc. ASM1062 Serial ATA Controller [1b21:0612] (rev 02)
0001:00:12.0 SATA controller [0106]: Intel Corporation Celeron N3350/Pentium N4200/Atom E3900 Series SATA AHCI Controller [8086:5ae3]
0001:00:13.0 Non-VGA unclassified device [0000]: Intel Corporation Celeron N3350/Pentium N4200/Atom E3900 Series PCI Express Port A #1 [8086:5ad8]
0001:00:14.0 Non-VGA unclassified device [0000]: Intel Corporation Celeron N3350/Pentium N4200/Atom E3900 Series PCI Express Port B #1 [8086:5ad6]
0001:00:15.0 USB controller [0c03]: Intel Corporation Celeron N3350/Pentium N4200/Atom E3900 Series USB xHCI [8086:5aa8]
0001:00:16.0 Signal processing controller [1180]: Intel Corporation Celeron N3350/Pentium N4200/Atom E3900 Series I2C Controller #1 [8086:5aac]
0001:00:18.0 Signal processing controller [1180]: Intel Corporation Celeron N3350/Pentium N4200/Atom E3900 Series HSUART Controller #1 [8086:5abc]
0001:00:19.0 Signal processing controller [1180]: Intel Corporation Celeron N3350/Pentium N4200/Atom E3900 Series SPI Controller #3 [8086:5ac6]
0001:00:19.2 Signal processing controller [1180]: Intel Corporation Celeron N3350/Pentium N4200/Atom E3900 Series SPI Controller #3 [8086:5ac6]
0001:00:1f.0 SMBus [0c05]: Intel Corporation Celeron N3350/Pentium N4200/Atom E3900 Series SMBus Controller [8086:5ad4]
0001:00:1f.1 SMBus [0c05]: Intel Corporation Celeron N3350/Pentium N4200/Atom E3900 Series SMBus Controller [8086:5ad4]
0001:01:00.0 SATA controller [0106]: Marvell Technology Group Ltd. 88SE9215 PCIe 2.0 x1 4-port SATA 6 Gb/s Controller [1b4b:9215] (rev 11)
0001:02:00.0 Ethernet controller [0200]: Intel Corporation I211 Gigabit Network Connection [8086:1539] (rev 03)
0001:03:00.0 Ethernet controller [0200]: Intel Corporation I211 Gigabit Network Connection [8086:1539] (rev 03)

root@DS918_N3150:/# lspci -k
0000:00:00.0 Host bridge: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series SoC Transaction Register (rev 21)
        Subsystem: Device 1849:22b1
        Kernel driver in use: iosf_mbi_pci
0000:00:02.0 VGA compatible controller: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Integrated Graphics Controller (rev 21)
        Subsystem: Device 1849:22b1
        Kernel driver in use: i915
0000:00:13.0 SATA controller: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series SATA Controller (rev 21)
        Subsystem: Device 1849:22a3
        Kernel driver in use: ahci
0000:00:14.0 USB controller: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series USB xHCI Controller (rev 21)
        Subsystem: Device 1849:22b5
        Kernel driver in use: xhci_hcd
0000:00:1a.0 Encryption controller: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series Trusted Execution Engine (rev 21)
        Subsystem: Device 1849:2298
0000:00:1c.0 PCI bridge: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series PCI Express Port #1 (rev 21)
        Kernel driver in use: pcieport
0000:00:1c.1 PCI bridge: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series PCI Express Port #2 (rev 21)
        Kernel driver in use: pcieport
0000:00:1c.2 PCI bridge: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series PCI Express Port #3 (rev 21)
        Kernel driver in use: pcieport
0000:00:1c.3 PCI bridge: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series PCI Express Port #4 (rev 21)
        Kernel driver in use: pcieport
0000:00:1f.0 ISA bridge: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series PCU (rev 21)
        Subsystem: Device 1849:229c
        Kernel driver in use: lpc_ich
0000:00:1f.3 SMBus: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx SMBus Controller (rev 21)
        Subsystem: Device 1849:2292
        Kernel driver in use: i801_smbus
0000:03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 11)
        Subsystem: Device 1849:8168
        Kernel driver in use: r8169
0000:04:00.0 SATA controller: ASMedia Technology Inc. ASM1062 Serial ATA Controller (rev 02)
        Subsystem: Device 1849:0612
        Kernel driver in use: ahci
0001:00:12.0 SATA controller: Intel Corporation Celeron N3350/Pentium N4200/Atom E3900 Series SATA AHCI Controller
0001:00:13.0 Non-VGA unclassified device: Intel Corporation Celeron N3350/Pentium N4200/Atom E3900 Series PCI Express Port A #1
0001:00:14.0 Non-VGA unclassified device: Intel Corporation Celeron N3350/Pentium N4200/Atom E3900 Series PCI Express Port B #1
0001:00:15.0 USB controller: Intel Corporation Celeron N3350/Pentium N4200/Atom E3900 Series USB xHCI
0001:00:16.0 Signal processing controller: Intel Corporation Celeron N3350/Pentium N4200/Atom E3900 Series I2C Controller #1
0001:00:18.0 Signal processing controller: Intel Corporation Celeron N3350/Pentium N4200/Atom E3900 Series HSUART Controller #1
0001:00:19.0 Signal processing controller: Intel Corporation Celeron N3350/Pentium N4200/Atom E3900 Series SPI Controller #3
0001:00:19.2 Signal processing controller: Intel Corporation Celeron N3350/Pentium N4200/Atom E3900 Series SPI Controller #3
0001:00:1f.0 SMBus: Intel Corporation Celeron N3350/Pentium N4200/Atom E3900 Series SMBus Controller
0001:00:1f.1 SMBus: Intel Corporation Celeron N3350/Pentium N4200/Atom E3900 Series SMBus Controller
0001:01:00.0 SATA controller: Marvell Technology Group Ltd. 88SE9215 PCIe 2.0 x1 4-port SATA 6 Gb/s Controller (rev 11)
0001:02:00.0 Ethernet controller: Intel Corporation I211 Gigabit Network Connection (rev 03)
0001:03:00.0 Ethernet controller: Intel Corporation I211 Gigabit Network Connection (rev 03)
root@DS918_N3150:/#

root@DS918_N3150:/# dmesg | grep error
[    5.741305] intel-lpss: probe of 0001:00:16.0 failed with error -22
[    5.748276] intel-lpss: probe of 0001:00:18.0 failed with error -22
[    5.755130] intel-lpss: probe of 0001:00:19.0 failed with error -22
[    5.762000] intel-lpss: probe of 0001:00:19.2 failed with error -22
[    7.400763] ahci: probe of 0001:01:00.0 failed with error -22
[    7.407073] ahci: probe of 0001:00:12.0 failed with error -22
[    8.087065] xhci_hcd: probe of 0001:00:15.0 failed with error -16
[   27.299463] igb: probe of 0001:02:00.0 failed with error -5
[   27.305474] igb: probe of 0001:03:00.0 failed with error -5
[   38.457516] r8169 0000:03:00.0: Direct firmware load for rtl_nic/rtl8168g-2.fw failed with error -2

root@DS918_N3150:/# dmesg | grep failed
[    3.661092] redpill: module verification failed: signature and/or required key missing - tainting kernel
[    5.741305] intel-lpss: probe of 0001:00:16.0 failed with error -22
[    5.748276] intel-lpss: probe of 0001:00:18.0 failed with error -22
[    5.755130] intel-lpss: probe of 0001:00:19.0 failed with error -22
[    5.762000] intel-lpss: probe of 0001:00:19.2 failed with error -22
[    7.400763] ahci: probe of 0001:01:00.0 failed with error -22
[    7.407073] ahci: probe of 0001:00:12.0 failed with error -22
[    8.087065] xhci_hcd: probe of 0001:00:15.0 failed with error -16
[   25.601508] systemd[1]: Cannot add dependency job for unit pkg-install-high-priority-builtin.service, ignoring: Unit pkg-install-high-priority-builtin.service failed to load: No such file or directory.
[   25.621091] systemd[1]: Cannot add dependency job for unit pkg-install-low-priority-builtin.service, ignoring: Unit pkg-install-low-priority-builtin.service failed to load: No such file or directory.
[   27.299463] igb: probe of 0001:02:00.0 failed with error -5
[   27.305474] igb: probe of 0001:03:00.0 failed with error -5
[   38.457516] r8169 0000:03:00.0: Direct firmware load for rtl_nic/rtl8168g-2.fw failed with error -2

Now I'm building up the know-how to be able to deal with the problems.

At the moment I can't judge whether I might have to integrate special drivers using an extension.

I'm also having a hard time assessing the impact of these errors.

What options do I have to fix these errors?

Edited March 1, 2022 by garciahelp
Update

AlexFullmoon · March 1, 2022

21 hours ago, IG-88 said:

no of course not, or would not be able to even us a usb flash driver or usb HDD for backup

they finaly removed already not maintained stuff like dvb or wifi usb support (along with usbserial, audio and bluetooth)

they did not support newer wifi dongles for years

back to UPS:

https://kb.synology.com/en-nz/DSM/help/DSM/AdminCenter/system_hardware_ups?version=7

https://www.synology.com/en-global/compatibility?search_by=category&category=upses&p=1&change_log_p=1

~~Well, Powercom isn't in supported list, though again, not sure if that's the cause. It was working in 6.2.3, you see.~~

~~Maybe I somehow misconfigured USB ports...~~

Disregard all that, looks like UPS USB controller is fried.

Peter Suh · March 2, 2022

18 hours ago, jumkey said:

https://github.com/jumkey/redpill-load/blob/develop/redpill-dtb/README.md

@dolbycat

Refer to the link below to install dtb.

https://community.arm.com/oss-platforms/w/docs/525/device-tree

giorgosperi · March 2, 2022

hi, i installed dsm 7.0.1-42218 on esxi.

the only issue that i have so far is that its not detecting the sfp+ card. on 6.2.3-25426 it was working.

also do you know if i can upgrade the 6.2.3 to 7.0.1?

thanks

dolbycat · March 2, 2022

7 hours ago, Peter Suh said:

@dolbycat

Refer to the link below to install dtb.

https://community.arm.com/oss-platforms/w/docs/525/device-tree

That's good info.

Edited March 2, 2022 by dolbycat

RedwinX · March 2, 2022

16 hours ago, giorgosperi said:

hi, i installed dsm 7.0.1-42218 on esxi.

the only issue that i have so far is that its not detecting the sfp+ card. on 6.2.3-25426 it was working.

also do you know if i can upgrade the 6.2.3 to 7.0.1?

thanks

If you read/search on this post, I can confirm you that you can upgrade easily from 6.2.3 to 7.0.1. Please make a backup first, as always. The upgrade is simple, and works fine (tested on 5 xpenology in production --> upgrade from jun's loader 1.04b/1.03b).

For sfp+, what's your card reference? You can use extension from @pocopico. Just give me the reference of your card, and I will told you which driver used.

yaleforks · March 2, 2022

I dont know if this is possible but I would like my 918+ redpill installation to show 12 drive slots instead of the normal 4, I have 11 drives populated and everything is working fine.

zhangjie809 · March 3, 2022

On 2/26/2022 at 12:40 PM, jumkey said:

念念不忘必有回响

DS920+ and new PortMapping ext(redpill-dtb)

https://github.com/jumkey/redpill-load/commit/845c9dd4a86eaf38186a2f062388127a6be37eef

On 3/1/2022 at 5:40 AM, dolbycat said:

Thank you, jumkey, tossp

I also succeeded in DS920+. ( asrock j5040 )

Realtech LAN recognized and Intel LAN Card failed to recognize.
Only two of the four main board SATA ports recognized HDD.

How did you do it by 'config.json'?

https://github.com/jumkey/redpill-load/commit/845c9dd4a86eaf38186a2f062388127a6be37eef

Can you tell us about your completion process? Thanks.

dolbycat · March 3, 2022

13 minutes ago, zhangjie809 said:

How did you do it by 'config.json'?

https://github.com/jumkey/redpill-load/commit/845c9dd4a86eaf38186a2f062388127a6be37eef

Can you tell us about your completion process? Thanks.

https://github.com/tossp/redpill-tool-chain

jumkey · March 3, 2022

25 minutes ago, zhangjie809 said:

Can you tell us about your completion process? Thanks.

replace model_ds920p.dtb and add redpill-dtb ext

zhangjie809 · March 3, 2022

59 minutes ago, dolbycat said:

https://github.com/tossp/redpill-tool-chain

gan xie lao tie!

Peter Suh · March 3, 2022

If you build a new Xpenology img file with Tossp's redpill-tool-chain, you don't need to install Ubuntu separately.

If you only have the existing Xpenology installed, you can go to SSH and use it as below.

All you need to do is install the docker package in advance in the Xpenology. (docker demon)

It's the basic package of the package center, so just install it.

And, I tried to run it right away without going into root authority, but I just got Help as below.

You don't need to install jq either.

You don't need to set the chmod +x execution authority of redpill-tool-chain.sh

Root account access is required with the sudo su or sudo -i command.

Please add the LAN or HBA card driver you need as the guide.

Just build and auto, and that's it.

platform_user_config.json is created as an editor, so you have to look at the separate hand.

The case below used DS3622xxs+ broadwellnk_user_config.json.

If I use it well, I think I can use it as easily as TINYCORE.

Linux Ubuntu was installed separately, docker environment was established, and it became very easy.

Is it the first thing I found right?

----------------------------------------------------------------------------------

admin@NAS5:/volume1/_REDPILL/redpill-tool-chain-master$ ./redpill_tool_chain.sh

Usage: ./redpill_tool_chain.sh

Actions: build, auto, run, clean

- build: Build the toolchain image for the specified platform version.

- auto: Starts the toolchain container using the previosuly build toolchain image for the specified platform.

Updates redpill sources and builds the bootloader image automaticaly. Will end the container once done.

- run: Starts the toolchain container using the previously built toolchain image for the specified platform.

Interactive Bash terminal.

- clean: Removes old (=dangling) images and the build cache for a platform version.

Use ‘all’ as platform version to remove images and build caches for all platform versions.

- add: To install extension you need to know its index file location and nothing more.

eg: add 'https://example.com/some-extension/rpext-index.json'

- del: To remove an already installed extension you need to know its ID.

eg: del 'example_dev.some_extension'

Available platform versions:

---------------------

bromolow-6.2.4-25556

bromolow-7.0-41222

bromolow-7.0.1-42218

apollolake-6.2.4-25556

apollolake-7.0-41890

apollolake-7.0.1-42218

broadwell-7.0.1-42218

broadwellnk-7.0.1-42218

geminilake-7.0.1-42218

Custom Extensions:

---------------------

[Nothing]

Check global_settings.json for settings.

admin@NAS5:~$
admin@NAS5:~$ sudo -i
root@NAS5:~# pwd
/root
root@NAS5:~# cd \volume1\_REDPILL
-ash: cd: volume1_REDPILL: No such file or directory
root@NAS5:~# cd \volume1
-ash: cd: volume1: No such file or directory
root@NAS5:~# cd\
>
root@NAS5:~# cd ..
root@NAS5:/# pwd
/
root@NAS5:/# ll
total 76
drwxr-xr-x 24 root root 4096 Mar 3 21:22 .
drwxr-xr-x 24 root root 4096 Mar 3 21:22 ..
-rw-r--r-- 1 root root 0 Jan 12 2021 1
lrwxrwxrwx 1 root root 7 May 31 2020 bin -> usr/bin
drwxr-xr-x 7 root root 0 Mar 3 19:01 config
drwxr-xr-x 13 root root 19260 Mar 3 21:17 dev
drwxr-xr-x 48 root root 4096 Mar 3 21:29 etc
drwxr-xr-x 43 root root 4096 May 31 2020 etc.defaults
drwxr-xr-x 2 root root 4096 May 12 2020 initrd
lrwxrwxrwx 1 root root 7 May 31 2020 lib -> usr/lib
lrwxrwxrwx 1 root root 9 May 31 2020 lib32 -> usr/lib32
lrwxrwxrwx 1 root root 7 May 31 2020 lib64 -> usr/lib
drwxr-xr-x 2 root root 4096 May 31 2020 .log.junior
drwx------ 2 root root 4096 May 12 2020 lost+found
-rw-r--r-- 1 root root 0 Jan 12 2021 Media
drwxr-xr-x 2 root root 4096 May 12 2020 mnt
drwxr-xr-x 2 root root 4096 May 31 2020 .old_patch_info
drwx--x--x 3 root root 4096 Mar 3 21:22 opt
dr-xr-xr-x 451 root root 0 Mar 3 19:00 proc
-rwxr-xr-x 1 root root 924 Jun 12 2020 raid_speed_up.sh
-rw------- 1 root root 1024 May 31 2020 .rnd
drwx------ 5 root root 4096 Jun 5 2021 root
drwxr-xr-x 32 root root 1740 Mar 3 21:31 run
lrwxrwxrwx 1 root root 8 May 31 2020 sbin -> usr/sbin
-rw-r--r-- 1 root root 0 Jan 12 2021 Server
drwxr-xr-x 4 root root 4096 May 31 2020 .syno
dr-xr-xr-x 12 root root 0 Mar 3 19:00 sys
drwxr-xr-x 2 root root 4096 Jun 1 2020 .system_info
drwxrwxrwt 16 root root 1540 Mar 3 21:31 tmp
drwxr-xr-x 11 root root 4096 May 12 2020 usr
drwxr-xr-x 17 root root 4096 Mar 3 19:01 var
drwxr-xr-x 14 root root 4096 May 31 2020 var.defaults
drwxr-xr-x 1 root root 574 Mar 3 21:22 volume1
drwxrwxrwx 3 root root 4096 Jan 20 2021 volume2
root@NAS5:/# cd volume2
root@NAS5:/volume2# ls -al
total 12
drwxrwxrwx 3 root root 4096 Jan 20 2021 .
drwxr-xr-x 24 root root 4096 Mar 3 21:22 ..
drwxrwxrwx 3 root root 4096 Jan 20 2021 @eaDir
root@NAS5:/volume2# cd ..
root@NAS5:/# cd volume1
root@NAS5:/volume1# ll
total 4
drwxr-xr-x 1 root root 574 Mar 3 21:22 .
drwxr-xr-x 24 root root 4096 Mar 3 21:22 ..
drwxr-xr-x 1 root root 84 Mar 3 21:22 @appstore
d---------+ 1 root root 3212 Dec 24 20:37 data
drwxr-xr-x 1 admin users 76 Dec 19 21:19 @database
drwxr-xr-x+ 1 root root 172 Aug 16 2021 docker
drwx--x--x 1 root root 160 Mar 3 21:23 @docker
drwxrwxrwx+ 1 root root 372 Mar 3 21:30 @eaDir
d---------+ 1 root root 2066 Mar 3 07:58 _GAME_RUN
d---------+ 1 root root 1040 Dec 24 20:37 _GAME_SETUP
drwx--x--x+ 1 root root 30 Dec 21 00:13 homes
d---------+ 1 root root 450 Mar 3 12:47 log
d---------+ 1 root root 728 Mar 2 21:46 _MOVIE_BOX
d---------+ 1 root root 4802 May 18 2021 music
d---------+ 1 root root 302 Jan 19 18:14 MyDoc_Share
d---------+ 1 root root 18 Feb 27 23:31 NetBackup
d---------+ 1 root root 1024 Feb 13 12:35 _OS_EXSI
d---------+ 1 root root 1774 Dec 24 20:37 _OS_WINDOWS
drwxr-xr-x+ 1 138862 138862 55338 Dec 24 09:50 photo
d---------+ 1 root root 808 May 26 2021 Plex
d---------+ 1 root root 874 Dec 24 20:37 _PS2_ISO
d---------+ 1 root root 80 Mar 3 21:31 _REDPILL
drwxr-xr-x 1 root root 24 Dec 19 21:19 @S2S
d---------+ 1 root root 254 Aug 24 2021 script
drwxr-xr-x 1 root root 0 Feb 25 23:45 @sharesnap
drwxr-xr-x 1 root root 8 Feb 25 23:10 @SnapshotReplication
d---------+ 1 root root 32 Feb 28 01:09 svn
drwxr-xr-x 1 SynoFinder SynoFinder 26 Jan 11 18:14 @SynoFinder-etc-volume
drwxr-xr-x 1 SynoFinder SynoFinder 84 Jan 11 18:14 @SynoFinder-log
d---------+ 1 root root 1806 Feb 24 23:08 timemachine
drwxrwxrwt 1 root root 50 Mar 3 21:30 @tmp
d---------+ 1 root root 306 Dec 19 01:56 Tomcat
d---------+ 1 root root 34 Mar 2 17:40 USER_HOMES
d---------+ 1 root root 1148 Dec 25 21:45 VHD
d---------+ 1 root root 108 Feb 28 13:38 video
d---------+ 1 root root 6084 Feb 17 23:44 _WAREHOUSE
d---------+ 1 root root 126 Feb 27 19:08 web
drwxr-xr-x 1 root root 0 Feb 23 23:00 @webdav
root@NAS5:/volume1# cd _REDPILL
root@NAS5:/volume1/_REDPILL# cd r*
root@NAS5:/volume1/_REDPILL/redpill-tool-chain-master# ll
total 60
d---------+ 1 admin users 306 Feb 23 20:58 .
d---------+ 1 root root 80 Mar 3 21:31 ..
d---------+ 1 admin users 32 Feb 23 20:58 cache
d---------+ 1 admin users 32 Feb 23 20:58 custom
d---------+ 1 admin users 92 Feb 23 20:58 docker
drwxrwxrwx+ 1 root users 1264 Mar 3 21:31 @eaDir
----------+ 1 admin users 299 Feb 23 20:58 .editorconfig
d---------+ 1 admin users 30 Feb 23 20:58 .github
----------+ 1 admin users 37 Feb 23 20:58 .gitignore
----------+ 1 admin users 10260 Feb 23 20:58 global_config.json
d---------+ 1 admin users 32 Feb 23 20:58 images
----------+ 1 admin users 6754 Feb 23 20:58 README_EN.md
----------+ 1 admin users 5481 Feb 23 20:58 README.md
----------+ 1 admin users 14729 Feb 23 20:58 redpill_tool_chain.sh
----------+ 1 admin users 208 Feb 23 20:58 sample_user_config.json
----------+ 1 admin users 541 Feb 23 20:58 synoboot.sh
root@NAS5:/volume1/_REDPILL/redpill-tool-chain-master# ./redpill_tool_chain.sh
Usage: ./redpill_tool_chain.sh <action> <platform version>

Actions: build, auto, run, clean

- build: Build the toolchain image for the specified platform version.

- auto: Starts the toolchain container using the previosuly build toolchain image for the specified platform.
Updates redpill sources and builds the bootloader image automaticaly. Will end the container once done.

- run: Starts the toolchain container using the previously built toolchain image for the specified platform.
Interactive Bash terminal.

- clean: Removes old (=dangling) images and the build cache for a platform version.
Use ‘all’ as platform version to remove images and build caches for all platform versions.

- add: To install extension you need to know its index file location and nothing more.
eg: add 'https://example.com/some-extension/rpext-index.json'

- del: To remove an already installed extension you need to know its ID.
eg: del 'example_dev.some_extension'

Available platform versions:
---------------------
bromolow-6.2.4-25556
bromolow-7.0-41222
bromolow-7.0.1-42218
apollolake-6.2.4-25556
apollolake-7.0-41890
apollolake-7.0.1-42218
broadwell-7.0.1-42218
broadwellnk-7.0.1-42218
geminilake-7.0.1-42218

Custom Extensions:
---------------------
[Nothing]

Check global_settings.json for settings.
root@NAS5:/volume1/_REDPILL/redpill-tool-chain-master# cp sample_user_config.json broadwellnk_user_config.json
root@NAS5:/volume1/_REDPILL/redpill-tool-chain-master# ./redpill_tool_chain.sh build broadwellnk-7.0.1-42218
Downloading Toolkit Dev
######################################################################## 100.0%
[+] Building 265.3s (15/15) FINISHED
=> [internal] load build definition from Dockerfile 2.5s
=> => transferring dockerfile: 2.60kB 0.0s
=> [internal] load .dockerignore 3.0s
=> => transferring context: 2B 0.0s
=> [internal] load metadata for docker.io/library/debian:10-slim 4.0s
=> [extract 1/2] FROM docker.io/library/debian:10-slim@sha256:e61cffb42ef0dbb31832d4543d6998ab9125210d0136bc0aed65cc753cee9125 7.2s
=> => resolve docker.io/library/debian:10-slim@sha256:e61cffb42ef0dbb31832d4543d6998ab9125210d0136bc0aed65cc753cee9125 0.0s
=> => sha256:e61cffb42ef0dbb31832d4543d6998ab9125210d0136bc0aed65cc753cee9125 1.85kB / 1.85kB 0.0s
=> => sha256:e847f59f3eeb921647a66e95ebf849f442eb7ebabbdb3dd3d1ea07689871b1a5 529B / 529B 0.0s
=> => sha256:09904dab2f4100eee259d1f77a49f2101a8b694959c401c799622b6fe1c203b5 1.46kB / 1.46kB 0.0s
=> => sha256:15115158dd02a1bf2fd28724e3c1024394033fb0e9a5d3e451ed2715b6ae312d 27.15MB / 27.15MB 2.0s
=> => extracting sha256:15115158dd02a1bf2fd28724e3c1024394033fb0e9a5d3e451ed2715b6ae312d 1.7s
=> [internal] load build context 4.7s
=> => transferring context: 359.58MB 2.8s
=> [stage-1 2/9] RUN cp /etc/apt/sources.list /etc/apt/sources.list.bak && sed -i "s/archive.ubuntu.com/mirrors.aliyun.com/g" /etc/apt/sources.list && sed 211.8s
=> [extract 2/2] ADD downloads/ds.broadwellnk-7.0.dev.txz / 34.8s
=> [stage-1 3/9] RUN git clone https://github.com/jumkey/redpill-lkm.git -b develop /opt/redpill-lkm && git clone https://github.com/jumkey/redpill-load.git -b d 7.9s
=> [stage-1 4/9] COPY --from=extract /usr/local/x86_64-pc-linux-gnu/x86_64-pc-linux-gnu/sys-root/usr/lib/modules/DSM-7.0/build/ /opt/toolkit_dev-broadwellnk-7.0.1-4221 3.6s
=> [stage-1 5/9] RUN if [ "apollolake" = "broadwellnk" ]; then echo '+' > /opt/toolkit_dev-broadwellnk-7.0.1-42218/.scmversion; fi && if [ "toolkit_dev" = "kernel" 4.6s
=> [stage-1 6/9] WORKDIR /opt 2.4s
=> [stage-1 7/9] COPY Makefile /opt/ 1.8s
=> [stage-1 8/9] COPY entrypoint.sh /entrypoint.sh 1.9s
=> [stage-1 9/9] RUN chmod +x /entrypoint.sh 3.7s
=> exporting to image 10.6s
=> => exporting layers 10.5s
=> => writing image sha256:f1c9fdc1e2b3d6f490807759ab39763bb1fd5ce55edd281cbff9ae8bd12d379f 0.1s
=> => naming to docker.io/library/redpill-tool-chain:broadwellnk-7.0.1-42218 0.0s
root@NAS5:/volume1/_REDPILL/redpill-tool-chain-master# ./redpill_tool_chain.sh auto broadwellnk-7.0.1-42218
Checking if redpill-lkm sources require pull.
Nothing to do.
Check if redpill-load sources require pull.
Nothing to do.
Lay back and enjoy the show: Magic is about to happen!
make[1]: Entering directory '/opt/redpill-lkm'
make -C /opt/toolkit_dev-broadwellnk-7.0.1-42218 M=/opt/redpill-lkm RP_MODULE_TARGET="dev" RP_MODULE_TARGET_VER="7" modules
make[2]: Entering directory '/opt/toolkit_dev-broadwellnk-7.0.1-42218'
RP-TARGET SPECIFIED AS dev v7
CC [M] /opt/redpill-lkm/compat/string_compat.o
CC [M] /opt/redpill-lkm/internal/helper/math_helper.o
CC [M] /opt/redpill-lkm/internal/helper/memory_helper.o
CC [M] /opt/redpill-lkm/internal/helper/symbol_helper.o
CC [M] /opt/redpill-lkm/internal/scsi/scsi_toolbox.o
CC [M] /opt/redpill-lkm/internal/scsi/scsi_notifier_list.o
CC [M] /opt/redpill-lkm/internal/scsi/scsi_notifier.o
CC [M] /opt/redpill-lkm/internal/override/override_symbol.o
CC [M] /opt/redpill-lkm/internal/override/override_syscall.o
CC [M] /opt/redpill-lkm/internal/intercept_execve.o
CC [M] /opt/redpill-lkm/internal/call_protected.o
CC [M] /opt/redpill-lkm/internal/intercept_driver_register.o
CC [M] /opt/redpill-lkm/internal/stealth/sanitize_cmdline.o
CC [M] /opt/redpill-lkm/internal/stealth.o
CC [M] /opt/redpill-lkm/internal/virtual_pci.o
CC [M] /opt/redpill-lkm/internal/uart/uart_swapper.o
CC [M] /opt/redpill-lkm/internal/uart/vuart_virtual_irq.o
CC [M] /opt/redpill-lkm/internal/uart/virtual_uart.o
CC [M] /opt/redpill-lkm/internal/ioscheduler_fixer.o
CC [M] /opt/redpill-lkm/config/cmdline_delegate.o
/opt/redpill-lkm/config/cmdline_delegate.c: In function 'extract_config_from_cmdline':
/opt/redpill-lkm/config/cmdline_delegate.c:413:74: warning: value computed is not used [-Wunused-value]
extract_netif_macs(config->macs, single_param_chunk) ||
^~
CC [M] /opt/redpill-lkm/config/runtime_config.o
CC [M] /opt/redpill-lkm/shim/boot_dev/boot_shim_base.o
CC [M] /opt/redpill-lkm/shim/boot_dev/usb_boot_shim.o
CC [M] /opt/redpill-lkm/shim/boot_dev/fake_sata_boot_shim.o
In file included from /opt/redpill-lkm/shim/boot_dev/fake_sata_boot_shim.c:46:
/opt/redpill-lkm/compat/toolkit/include/../drivers/usb/storage/usb.h:50:2: warning: #warning "Using compatibility file for drivers/usb/storage/usb.h - if possible do NOT compile using toolkit" [-Wcpp]
#warning "Using compatibility file for drivers/usb/storage/usb.h - if possible do NOT compile using toolkit"
^~~~~~~
CC [M] /opt/redpill-lkm/shim/boot_dev/native_sata_boot_shim.o
CC [M] /opt/redpill-lkm/shim/boot_device_shim.o
CC [M] /opt/redpill-lkm/shim/storage/smart_shim.o
CC [M] /opt/redpill-lkm/shim/storage/sata_port_shim.o
CC [M] /opt/redpill-lkm/shim/bios/bios_hwcap_shim.o
CC [M] /opt/redpill-lkm/shim/bios/bios_hwmon_shim.o
CC [M] /opt/redpill-lkm/shim/bios/rtc_proxy.o
CC [M] /opt/redpill-lkm/shim/bios/bios_shims_collection.o
CC [M] /opt/redpill-lkm/shim/bios_shim.o
CC [M] /opt/redpill-lkm/shim/block_fw_update_shim.o
CC [M] /opt/redpill-lkm/shim/disable_exectutables.o
CC [M] /opt/redpill-lkm/shim/pci_shim.o
CC [M] /opt/redpill-lkm/shim/pmu_shim.o
CC [M] /opt/redpill-lkm/shim/uart_fixer.o
CC [M] /opt/redpill-lkm/redpill_main.o
LD [M] /opt/redpill-lkm/redpill.o
Building modules, stage 2.
RP-TARGET SPECIFIED AS dev v7
MODPOST 1 modules
CC /opt/redpill-lkm/redpill.mod.o
LD [M] /opt/redpill-lkm/redpill.ko
make[2]: Leaving directory '/opt/toolkit_dev-broadwellnk-7.0.1-42218'
make[1]: Leaving directory '/opt/redpill-lkm'
#############################################
filename: /opt/redpill-lkm/redpill.ko
license: GPL
version: v0.5-at-2022_03_03-12_41_28
author: TTG
srcversion: EB354894B5A0F9251BA54D3
depends:
retpoline: Y
vermagic: 4.4.180+ SMP mod_unload
#############################################
Using user_config.json:
{
"extra_cmdline": {
"pid": "0x0001",
"vid": "0x46f4",
"sn": "1234XXX123",
"mac1": "XXYYXXYYXXYY"
},
"synoinfo": {},
"ramdisk_copy": {},
"extensions": []
}
#############################################
/opt/redpill-load /opt
[#] Checking runtime for required tools... [OK]
[#] Updating extensions...

[#] Checking runtime for required tools... [OK]
[*] Your extensions directory /opt/redpill-load/custom/extensions doesn't exists - creating
[#] Adding new extension from https://github.com/jumkey/redpill-load/raw/develop/redpill-virtio/rpext-index.json...
[#] Downloading remote file https://github.com/jumkey/redpill-load/raw/develop/redpill-virtio/rpext-index.json to /opt/redpill-load/custom/extensions/_new_ext_index.tmp_json
######################################################################################################################################################################## 100.0%######################################################################################################################################################################## 100.0%
[OK]
[#] ========================================== thethorgroup.virtio ==========================================
[#] Extension name: VirtIO
[#] Description: Adds VirtIO support for fast network/PCI/SCSI/network/console paravirtualization under QEmu (Proxmox, VirtualBox, virsh, and similar)
[#] To get help visit: <todo>
[#] Extension preparer/packer: https://github.com/RedPill-TTG/redpill-virtio
[#] Software author: https://www.linux-kvm.org/page/Virtio
[#] Update URL: https://github.com/jumkey/redpill-load/raw/develop/redpill-virtio/rpext-index.json
[#] Platforms supported: ds3622xsp_42218 ds918p_42218 ds918p_41890 ds3615xs_42218 ds3615xs_25556 ds920p_42218 ds3615xs_41222 ds918p_25556 ds920p_42550 ds3617xs_42218
[#] =======================================================================================

[#] Checking runtime for required tools... [OK]
[#] Adding new extension from https://github.com/jumkey/redpill-load/raw/develop/redpill-boot-wait/rpext-index.json...
[#] Downloading remote file https://github.com/jumkey/redpill-load/raw/develop/redpill-boot-wait/rpext-index.json to /opt/redpill-load/custom/extensions/_new_ext_index.tmp_json
######################################################################################################################################################################## 100.0%######################################################################################################################################################################## 100.0%
[OK]
[#] ========================================== thethorgroup.boot-wait ==========================================
[#] Extension name: RedPill Bootwait
[#] Description: Simple extension which stops the execution early waiting for the boot device to appear
[#] To get help visit: https://github.com/RedPill-TTG/redpill-boot-wait
[#] Extension preparer/packer: https://github.com/RedPill-TTG/redpill-boot-wait
[#] Update URL: https://github.com/jumkey/redpill-load/raw/develop/redpill-boot-wait/rpext-index.json
[#] Platforms supported: ds3622xsp_42218 ds918p_42218 ds918p_41890 ds3615xs_42218 ds3615xs_25556 ds920p_42218 ds3615xs_41222 ds918p_25556 ds920p_42550 ds3617xs_42218
[#] =======================================================================================

[#] Checking runtime for required tools... [OK]
[#] Updating thethorgroup.boot-wait extension...
[#] Downloading remote file https://github.com/jumkey/redpill-load/raw/develop/redpill-boot-wait/rpext-index.json to /opt/redpill-load/custom/extensions/_new_ext_index.tmp_json
######################################################################################################################################################################## 100.0%

[#] Extension thethorgroup.boot-wait index is already up to date
[#] Updating thethorgroup.virtio extension...
[#] Downloading remote file https://github.com/jumkey/redpill-load/raw/develop/redpill-virtio/rpext-index.json to /opt/redpill-load/custom/extensions/_new_ext_index.tmp_json
######################################################################################################################################################################## 100.0%

[#] Extension thethorgroup.virtio index is already up to date
[#] Updating thethorgroup.virtio extension... [OK]
[#] Checking runtime for required tools... [OK]
[#] Updating ds3622xsp_42218 platforms extensions...
[#] Downloading remote file https://github.com/RedPill-TTG/redpill-boot-wait/raw/master/recipes/universal.json to /opt/redpill-load/custom/extensions/_ext_new_rcp.tmp_json
######################################################################################################################################################################## 100.0%######################################################################################################################################################################## 100.0%

[#] Filling-in newly downloaded recipe for extension thethorgroup.boot-wait platform ds3622xsp_42218
[#] Downloading remote file https://raw.githubusercontent.com/RedPill-TTG/redpill-boot-wait/master/src/boot-wait.sh to /opt/redpill-load/custom/extensions/thethorgroup.boot-wait/ds3622xsp_42218/boot-wait.sh
######################################################################################################################################################################## 100.0%
[#] Verifying /opt/redpill-load/custom/extensions/thethorgroup.boot-wait/ds3622xsp_42218/boot-wait.sh file... [OK]
[#] Successfully processed recipe for extension thethorgroup.boot-wait platform ds3622xsp_42218
[#] Downloading remote file https://github.com/jumkey/redpill-load/raw/develop/redpill-virtio/recipes/ds3622xsp_41890.json to /opt/redpill-load/custom/extensions/_ext_new_rcp.tmp_json
######################################################################################################################################################################## 100.0%######################################################################################################################################################################## 100.0%
[#] Filling-in newly downloaded recipe for extension thethorgroup.virtio platform ds3622xsp_42218
[#] Downloading remote file https://raw.githubusercontent.com/RedPill-TTG/redpill-virtio/master/src/check-virtio.sh to /opt/redpill-load/custom/extensions/thethorgroup.virtio/ds3622xsp_42218/check-virtio.sh
######################################################################################################################################################################## 100.0%
[#] Verifying /opt/redpill-load/custom/extensions/thethorgroup.virtio/ds3622xsp_42218/check-virtio.sh file... [OK]
[#] Downloading remote file https://github.com/jumkey/redpill-load/raw/develop/redpill-virtio/releases/v1.0.0/broadwellnk/virtio-4.4.180p.tgz to /opt/redpill-load/custom/extensions/thethorgroup.virtio/ds3622xsp_42218/virtio-4.4.180p.tgz
######################################################################################################################################################################## 100.0%######################################################################################################################################################################## 100.0%
[#] Verifying /opt/redpill-load/custom/extensions/thethorgroup.virtio/ds3622xsp_42218/virtio-4.4.180p.tgz file... [OK]
[#] Unpacking files from /opt/redpill-load/custom/extensions/thethorgroup.virtio/ds3622xsp_42218/virtio-4.4.180p.tgz to /opt/redpill-load/custom/extensions/thethorgroup.virtio/ds3622xsp_42218/... [OK]
[#] Successfully processed recipe for extension thethorgroup.virtio platform ds3622xsp_42218
[#] Unpacking files from /opt/redpill-load/custom/extensions/thethorgroup.virtio/ds3622xsp_42218/virtio-4.4.180p.tgz to /opt/redpill-load/custom/extensions/thethorgroup.virtio/ds3622xsp_42218/... [OK]
[#] Updating extensions... [OK]
[#] PAT file /opt/redpill-load/cache/ds3622xsp_42218.pat not found - downloading from https://global.download.synology.com/download/DSM/release/7.0.1/42218/DSM_DS3622xs%2B_42218.pat
% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
100 345M 100 345M 0 0 22.1M 0 0:00:15 0:00:15 --:--:-- 22.9M
[#] Verifying /opt/redpill-load/cache/ds3622xsp_42218.pat file... [OK]
[#] Unpacking /opt/redpill-load/cache/ds3622xsp_42218.pat file to /opt/redpill-load/build/1646311298/pat-ds3622xsp_42218-unpacked... [OK]
[#] Verifying /opt/redpill-load/build/1646311298/pat-ds3622xsp_42218-unpacked/zImage file... [OK]
[#] Patching /opt/redpill-load/build/1646311298/pat-ds3622xsp_42218-unpacked/zImage to /opt/redpill-load/build/1646311298/zImage-patched... [OK]
[#] Verifying /opt/redpill-load/build/1646311298/pat-ds3622xsp_42218-unpacked/rd.gz file... [OK]
[#] Unpacking /opt/redpill-load/build/1646311298/pat-ds3622xsp_42218-unpacked/rd.gz file to /opt/redpill-load/build/1646311298/rd-ds3622xsp_42218-unpacked... [OK]
[#] Apply patches to /opt/redpill-load/build/1646311298/rd-ds3622xsp_42218-unpacked... [OK]
[#] Patching config files in ramdisk... [OK]
[#] Adding OS config patching... [OK]
[#] Repacking ramdisk to /opt/redpill-load/build/1646311298/rd-patched-ds3622xsp_42218.gz... [OK]
[#] Bundling extensions... [#] Checking runtime for required tools... [OK]
[#] Dumping ds3622xsp_42218 platform extensions to /opt/redpill-load/build/1646311298/custom-initrd/exts... [OK]
[#] Packing custom ramdisk layer to /opt/redpill-load/build/1646311298/custom.gz... [OK]
[#] Generating GRUB config... [OK]
[#] Creating loader image at /opt/redpill-load/images/redpill-DS3622xs+_7.0.1-42218_b1646311298.img... [OK]
[#] Cleaning up... [OK]
The redpill bootloader is created, the container will be ended now.
root@NAS5:/volume1/_REDPILL/redpill-tool-chain-master#

Edited March 3, 2022 by Peter Suh

RedPill - the new loader for 6.2.4 - Discussion

Recommended Posts

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites