WiteWulf Posted October 8, 2021 Share #2551 Posted October 8, 2021 Gen8 iLO doesn't come with full license, you have to buy a license code to unlock all the features. But like I say, I can't remember if the virtual serial port is part of that. I know remote media is. Link to comment Share on other sites More sharing options...
altas Posted October 8, 2021 Share #2552 Posted October 8, 2021 (edited) No Serial Only Putty with IP from ILO you can have for free a 30day Trial Full ILO License. in putty change unter Logging => All session output, to get all information from the GEN8 Edited October 8, 2021 by altas Link to comment Share on other sites More sharing options...
psychoboi32 Posted October 8, 2021 Share #2553 Posted October 8, 2021 Gen8 iLO doesn't come with full license, you have to buy a license code to unlock all the features. But like I say, I can't remember if the virtual serial port is part of that. I know remote media is.you know internet is awesome place you have to search little deep for keys like i have esxi license lol Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
psychoboi32 Posted October 8, 2021 Share #2554 Posted October 8, 2021 you know internet is awesome place you have to search little deep for keys like i have esxi license lol Sent from my iPhone using Tapatalki have g8 and g9 both work in ilo federation lmao [emoji23] Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
pocopico Posted October 8, 2021 Share #2555 Posted October 8, 2021 14 minutes ago, WiteWulf said: Gen8 iLO doesn't come with full license, you have to buy a license code to unlock all the features. But like I say, I can't remember if the virtual serial port is part of that. I know remote media is. There is no license cross check , one can be installed on many 1 Link to comment Share on other sites More sharing options...
MaiuZ Posted October 8, 2021 Share #2556 Posted October 8, 2021 On 9/16/2021 at 4:33 AM, GhostlyCrowd said: You wouldnt be willing to use you ninja module skills to get my update bricked netgear nas back up? ICHR7 chipset (NM10) intel and Marvell based nic. its a repurposed old Netgear ReadyNAS Ultra 2 RNDU2000 i had running on juns and updated it to 6.2.4 like a noob. If i could get 7.0.1 booting on it and migrate it that would be great. Also this rd.gz sucessfully booted my IBM X3650 but alas there is no M5110e sas drivers so it doesnt detect the disks, but all 6 nic ports do work (intel) so thanks for that hi there! how did you update to 6.2.4 on rndu2000 i'm able only to install 6.2 thanks Link to comment Share on other sites More sharing options...
tcs Posted October 8, 2021 Share #2557 Posted October 8, 2021 1 hour ago, MaiuZ said: hi there! how did you update to 6.2.4 on rndu2000 i'm able only to install 6.2 thanks What he's saying is he upgraded to 6.2.4 without reading the forums first, so I'm sure the system is currently a brick. 6.2.4 does not work with Jun's loader. Link to comment Share on other sites More sharing options...
paro44 Posted October 8, 2021 Share #2558 Posted October 8, 2021 (edited) 5 hours ago, mpuff said: Does WOL work with this loader? (HP Microgen 8 ) I can wake-up my Intel SS4200 with "wol.exe". I also tried with Synology Assistant, but that only worked once. After that first try I couldn't login to the DSM, there was only a message saying no nas was found. I never used the Assistant wol before, maybe I made something wrong. With "wol.exe" I had no problem so far. I'm not sure how the Gen8 will will behave, but generally wol works if you use third party tool. If you want to use the Assistant, maybe further work/testing is needed. Edited October 8, 2021 by paro44 1 Link to comment Share on other sites More sharing options...
paro44 Posted October 8, 2021 Share #2559 Posted October 8, 2021 2 hours ago, MaiuZ said: hi there! how did you update to 6.2.4 on rndu2000 i'm able only to install 6.2 thanks I think if the nic is supported in the extensions from RedPill, then you can update to 6.2.4 or higher. @thorgroup: Is there already a working extension for for nic's other than Intel (i.e. Marvel, Broadcom or Realtek)? I have seen virtio extension, but that is for virtual machines I guess. Link to comment Share on other sites More sharing options...
Mixpower Posted October 8, 2021 Share #2560 Posted October 8, 2021 (edited) So far my Gen8 Baremetal is working great using the B120i (AHCI) on 7.0-41222, I can't get my LSI 9207-4i4e (IT firmware) to work but I also don't see any speed difference at this moment. When I try 7.0.1-42218 it boots a little bit but then I get on Serial output -R-R-R-R-R-R and reboots. Edited October 8, 2021 by Mixpower Link to comment Share on other sites More sharing options...
psychoboi32 Posted October 8, 2021 Share #2561 Posted October 8, 2021 (edited) 36 minutes ago, Mixpower said: So far my Gen8 Baremetal is working great using the B120i (AHCI) on 7.0-41222, I can't get my LSI 9207-4i4e (IT firmware) to work but I also don't see any speed difference at this moment. When I try 7.0.1-42218 it boots a little bit but then I get on Serial output -R-R-R-R-R-R and reboots. This happened to me when I was using unsupported SAS card just curious are you adding drivers of mpt2sas? or you are using vanilla image. If you have more drives then follow what thor group says 15 hours ago, ThorGroup said: The reason why syno separates real SAS controllers is to offer .... hmm, a lot of hacks over their firmware and timing issues with LSI controllers. So in short emulating a true SAS type in syno will give us no benefits. Saying this we also, very cautiously, should probably make a recommendation: for anyone using a standard array of disks of 4-8 it's probably a better choice to go with a Marvell-based chip which works natively without drivers (and which syno uses as well). For bigger installations LSIs are still preferred (as they're cheap, work with low-cost used SAS drives, save on cabling etc etc). Edited October 8, 2021 by psychoboi32 Link to comment Share on other sites More sharing options...
tcs Posted October 8, 2021 Share #2562 Posted October 8, 2021 (edited) 16 hours ago, ThorGroup said: You probably installed too many drivers or found a bug causing a loop somewhere. You shouldn't really go above the space allocated (~50MB) as this is plenty for drivers you need on a single platform. Also a quick note on this front: it only takes two of the SAS drivers to run out of space with the 918+ build, not sure if @pocopico did something wrong building them or if they're really just that big - they're significantly larger than their 3615 counterparts. The 4.4.180plus mptsas driver alone is 6.76MB: https://github.com/pocopico/rp-ext/blob/main/mptsas/releases/mptsas-4.4.180plus.tgz Edited October 8, 2021 by tcs Link to comment Share on other sites More sharing options...
Mixpower Posted October 8, 2021 Share #2563 Posted October 8, 2021 23 minutes ago, psychoboi32 said: This happened to me when I was using unsupported SAS card just curious are you adding drivers of mpt2sas? or you are using vanilla image. If you have more drives then follow what thor group says I'm using the mpt2sas drivers from pocopico and have 4x 2TB drives with 7.0-41222 ds3615xs image. Link to comment Share on other sites More sharing options...
psychoboi32 Posted October 8, 2021 Share #2564 Posted October 8, 2021 (edited) 14 minutes ago, Mixpower said: I'm using the mpt2sas drivers from pocopico and have 4x 2TB drives with 7.0-41222 ds3615xs image. so it is working in 7.0 but not on 7.0.1? is I am right or did i misunderstood one more thing what platform are you using? apollolake or bromlow update I read your previous comment and issues lies with mpt2sas driver, mine with mpt3sas driver it just works in this update I thought mine using mpt3sas because i flashed mpt3 it mode but in reality it uses mpt2sas so mpt2sas working lsmod and lspci out given other comments Edited October 8, 2021 by psychoboi32 Link to comment Share on other sites More sharing options...
Mixpower Posted October 8, 2021 Share #2565 Posted October 8, 2021 (edited) 8 minutes ago, psychoboi32 said: so it is working in 7.0 but not on 7.0.1? is I am right or did i misunderstood one more thing what platform are you using? apollolake or bromlow update I read your previous comment and issues lies with mpt2sas driver, mine with mpt3sas driver it just works in this update No it is not working with my LSI 9207-4i4e so I am now using the B120i set on AHCI, which is just a software raid controller which is built-in with a Gen8 Microserver(e3-1265l v2). And 7.0.1-42218 does not boot at all on my Gen8, this is all Bromolow as Apollolake is not compatible. Edited October 8, 2021 by Mixpower Link to comment Share on other sites More sharing options...
psychoboi32 Posted October 8, 2021 Share #2566 Posted October 8, 2021 more searched on my system I found out this user@nas:~$ lsmod | grep mpt mptctl 26085 0 mptsas 38167 0 mptscsih 17934 1 mptsas mptbase 62090 3 mptctl,mptsas,mptscsih mpt3sas 140099 0 mpt2sas 137614 22 DeviceName: Storage Controller Subsystem: Device [1028:1f1c] Kernel driver in use: mpt2sas Link to comment Share on other sites More sharing options...
pocopico Posted October 8, 2021 Share #2567 Posted October 8, 2021 1 hour ago, psychoboi32 said: more searched on my system I found out this user@nas:~$ lsmod | grep mpt mptctl 26085 0 mptsas 38167 0 mptscsih 17934 1 mptsas mptbase 62090 3 mptctl,mptsas,mptscsih mpt3sas 140099 0 mpt2sas 137614 22 DeviceName: Storage Controller Subsystem: Device [1028:1f1c] Kernel driver in use: mpt2sas If you have mpt2sas you don’t need mptsas modules - these are for old 3Gb SAS HBAs. what is your fdisk -l reporting ? Link to comment Share on other sites More sharing options...
psychoboi32 Posted October 8, 2021 Share #2568 Posted October 8, 2021 If you have mpt2sas you don’t need mptsas modules - these are for old 3Gb SAS HBAs. what is your fdisk -l reporting ? thanks for suggestion about mptsas, i will remove it. fdisk -l reporting normal as expect Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
pocopico Posted October 8, 2021 Share #2569 Posted October 8, 2021 20 minutes ago, psychoboi32 said: thanks for suggestion about mptsas, i will remove it. fdisk -l reporting normal as expect Sent from my iPhone using Tapatalk Could you post it or pm it so I can see the issue ? Link to comment Share on other sites More sharing options...
fly Posted October 8, 2021 Share #2570 Posted October 8, 2021 17 hours ago, ThorGroup said: Don't edit these files manually. You can set any options in these files by adding "synoinfo" section to your user_conf. There's an example in the repo. Any options you set will take priority over default ones. The automatic code takes care about figuring out which options to remove/add/modify and to do it in 4 different files across 2 environments. Thank you to pointing me to that, you guys are to great 🙏. i am a noob when its comes to linux but right now i did manage to get it to work 👌. So right now i am trying to add a 64 GB usb flash drive as a internal drive ( fooling synology 🤫 ) to get manage my usbdrive as the way as internal drive. Link to comment Share on other sites More sharing options...
scoobdriver Posted October 8, 2021 Share #2571 Posted October 8, 2021 9 hours ago, scoobdriver said: So I just booted RedPill DS3615XS 7.0.1 42218 , as baremetal on my HP G8 MS , with onboard NIC , both ports ,and LSI card in IT mode used @pocopico tg3 and mpt2sas . (It did a migration , spare drive I used must have already had a 6.x build installed) both network ports are good . HDD on LSI detected, smart working etc . like @RedwinX the first first drive take sdb rather than sda , not sure if this would be an issue other than cosmetic , I assume everything would just be moved up so 8th drive would become sdi rather than sdh ? I'm going to convert the image to VMDK now and try passthrough on the card on Esxi so after a successful test on baremetal G8 with LSI card 2308 card and 7.0.1 42218 , I wanted to give esxi and passthrough a go. (First I upgraded my esxi from 6.7 to 7.0.3 , I’d not previously attempted this as I didn’t think the hba/ LSI card was supported, but on @Orphée advise I was told I would be able to pass it through… well he was correct. (The drive also showed up in esxi data store, before I enabled pass through which I wasn’t expecting ) With my LSI passed through (with same disk I had tested the Baremetal install on ) and a disk on the onboard b120i sata for the datastore/boot loader , I converted the exact same image i used earlier to vmdk and set up the vm. (Had to reserve ram) I powered up and it booted my previous Baremetal build in the VM, no migration needed or anything ! This gives me massive confidence to move my current ‘everyday system’ to esxi and 7.0.1 when the time comes. can’t thank the community and support here enough. iv’e just restored some media and my Plex docker to this test VM (hyper backup) , and was up and running within 10 min , and the fam have been watching Plex content from this new build for the last hour, so all seems good so far ! just to note the issue with 1st disk taking sdb persists (no impact to me at the moment) 2 Link to comment Share on other sites More sharing options...
dolbycat Posted October 9, 2021 Share #2572 Posted October 9, 2021 15 hours ago, taiziccf said: OrpheeGT repo do not have virtio for 7.0.1-42218. you can use my repo if you want { "id": "apollolake-7.0.1-42218", "platform_version": "apollolake-7.0.1-42218", "user_config_json": "apollolake_user_config.json", "docker_base_image": "debian:10-slim", "compile_with": "toolkit_dev", "redpill_lkm_make_target": "prod-v7", "downloads": { "kernel": { "url": "https://sourceforge.net/projects/dsgpl/files/Synology%20NAS%20GPL%20Source/25426branch/apollolake-source/linux-4.4.x.txz/download", "sha256": "af815ee065775d2e569fd7176e25c8ba7ee17a03361557975c8e5a4b64230c5b" }, "toolkit_dev": { "url": "https://sourceforge.net/projects/dsgpl/files/toolkit/DSM7.0/ds.apollolake-7.0.dev.txz/download", "sha256": "d349fa644392d4cfab8191243ee38aaa32bd517208c144678e0c855cb5a619ea" } }, "redpill_lkm": { "source_url": "https://github.com/RedPill-TTG/redpill-lkm.git", "branch": "master" }, "redpill_load": { "source_url": "https://github.com/chchia/redpill-load.git", "branch": "develop" } } Thanks to you, it was solved well. Link to comment Share on other sites More sharing options...
charlesd Posted October 9, 2021 Share #2573 Posted October 9, 2021 😙😙😙😙😙fghhb Link to comment Share on other sites More sharing options...
Orphée Posted October 9, 2021 Share #2574 Posted October 9, 2021 (edited) 6 hours ago, scoobdriver said: o after a successful test on baremetal G8 with LSI card 2308 card and 7.0.1 42218 , I wanted to give esxi and passthrough a go. (First I upgraded my esxi from 6.7 to 7.0.3 , I’d not previously attempted this as I didn’t think the hba/ LSI card was supported, but on @Orphée advise I was told I would be able to pass it through… well he was correct. (The drive also showed up in esxi data store, before I enabled pass through which I wasn’t expecting ) This is something I wanted to test/confirm. The SAS2308 may use mpt3sas driver on ESXi, if so the disk will be detected. VMWare dropped only mpt2sas support. Edited October 9, 2021 by Orphée Link to comment Share on other sites More sharing options...
pigr8 Posted October 9, 2021 Share #2575 Posted October 9, 2021 (edited) now i'm curious to check redpill on 6.2.4 that on bromolow has kernel 3.10.105 same as 6.2.3 with jun's and mpt2sas.ko should be the same. since on jun's everything works fine the same stuff should work on redpill, not giving bugs like the >2Tb edit: @haydibe mm is there a problem with 0.11? => [extract 2/2] ADD downloads/ / 15.8s => [stage-1 3/8] RUN git clone https://github.com/RedPill-TTG/redpill-lkm.git -b master /opt/redpill-lkm && git clone https://github.com/r0bb10/redpill-load. 3.3s => [stage-1 4/8] COPY --from=extract /opt/kernel-bromolow-6.2.4-25556 11.3s => ERROR [stage-1 5/8] RUN if [ "apollolake" = "bromolow" ]; then echo '+' > /opt/kernel-bromolow-6.2.4-25556/.scmversion; fi && if [ "kernel" = "kernel" ]; th 0.3s ------ > [stage-1 5/8] RUN if [ "apollolake" = "bromolow" ]; then echo '+' > /opt/kernel-bromolow-6.2.4-25556/.scmversion; fi && if [ "kernel" = "kernel" ]; then cp /opt/kernel-bromolow-6.2.4-25556/synoconfigs/bromolow /opt/kernel-bromolow-6.2.4-25556/.config && make -C /opt/kernel-bromolow-6.2.4-25556 oldconfig && make -C /opt/kernel-bromolow-6.2.4-25556 modules_prepare ; fi: #11 0.277 cp: cannot stat '/opt/kernel-bromolow-6.2.4-25556/synoconfigs/bromolow': No such file or directory ------ executor failed running [/bin/sh -c if [ "apollolake" = "$TARGET_PLATFORM" ]; then echo '+' > ${LINUX_SRC}/.scmversion; fi && if [ "$COMPILE_WITH" = "kernel" ]; then cp ${LINUX_SRC}/synoconfigs/${TARGET_PLATFORM} ${LINUX_SRC}/.config && make -C ${LINUX_SRC} oldconfig && make -C ${LINUX_SRC} modules_prepare ; fi]: exit code: 1 same error building apollolake Edited October 9, 2021 by pigr8 Link to comment Share on other sites More sharing options...
Recommended Posts