XerSonik Posted July 14, 2018 Share #1 Posted July 14, 2018 (edited) https://www.synology.com/en-global/releaseNote/DS3615xs Release Note: Version: 6.2-23739-2 Version: 6.2-23739-2 (2018-07-12) Important Note The update is expected to be available for all regions within the next few days, although the time of release in each region may vary slightly. This update will restart your Synology NAS if you are using the models listed below. XS Series : RS2818RP+, RS3618xs, RS2418RP+, RS2418+, FS1018, DS3018xs, RS818RP+, RS818+, FS3017, FS2017, RS4017xs+, RS3617xs, RS3617RPxs, DS3617xs, RS3617xs+, RS18017xs+, RS2416RP+, RS2416+, RS18016xs+, DS3615xs, RC18015xs+, RS815RP+, RS815+, RS3614xs, RS3614RPxs, RS3614xs+, RS3413xs+, RS10613xs+, DS3612xs, RS3412xs, RS3412RPxs, DS3611xs, RS3411xs, RS3411RPxs Plus Series : DS1618+, DS918+, DS718+, DS218+, DS1817+, DS1517+, DS2415+, DS1815+, DS1515+, DS415+ Value Series : DS418play Others : VirtualDSM, DDSM Fixed Issues Adjusted power saving mechanism to improve PCIe compatibility. Fixed multiple security vulnerabilities regarding Linux kernel (Synology-SA-18:01). Fixed an issue where iSCSI Manager might not open for the incompatible format of iSCSI LUN configuration files set up before DSM 5.2. Enhanced package start-up performance. Fixed a security vulnerability (Synology-SA-18:36). Edited February 22, 2019 by Polanskiman Edited to conform to Guidelines. Next time READ THE READ ME topic. Quote Link to comment Share on other sites More sharing options...
Dark Zydor Posted July 18, 2018 Share #2 Posted July 18, 2018 - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.2-23739 UPDATE 1 - Loader version and model: JUN'S LOADER v1.03a2 - DS918+ - Using custom extra.lzma: NO - Installation type: BAREMETAL - ASROCK J3455-ITX - Additional comments: Reboot is very slow, as usual: at least 5 minutes. Quote Link to comment Share on other sites More sharing options...
AndreyATGB Posted July 18, 2018 Share #3 Posted July 18, 2018 - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.2-23739 UPDATE 1 - Loader version and model: JUN'S LOADER v1.03a2 - DS918+ - Using custom extra.lzma: NO - Installation type: BAREMETAL - H110M-ITX - G4560 - Additional comments: Login page loaded quickly, actually being usable took a couple minutes. Quote Link to comment Share on other sites More sharing options...
Sonnyboy666 Posted July 18, 2018 Share #4 Posted July 18, 2018 - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.2-23739 UPDATE 1 - Loader version and model: JUN'S LOADER v1.03a2 - DS918+ - Using custom extra.lzma: NO - Installation type: BAREMETAL - DELL Poweredge T30 (Intel Xeon) - Additional comments: Reboot required - No Problems Quote Link to comment Share on other sites More sharing options...
turbo21psi Posted July 18, 2018 Share #5 Posted July 18, 2018 - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.2-23739 UPDATE 1 - Loader version and model: JUN'S LOADER v1.03a2 - DS918+ - Using custom extra.lzma: NO - Installation type: Baremetal - Supermicro x10slm+-f, e3-1220v3 - Additional comments: No issues, reboot less than 5 minutes. Quote Link to comment Share on other sites More sharing options...
XerSonik Posted July 18, 2018 Author Share #6 Posted July 18, 2018 - Outcome of the update: SUCESSFUL - DSM version prior update: DSM 6.2-23739 - Loader version and model: JUN'S LOADER v1.03a2 - DS918+ - Using custom extra.lzma: NO - Installation type: BAREMETAL - GA-N3150N-D3V - Additional comments: REBOOT, OK! Quote Link to comment Share on other sites More sharing options...
manfriday Posted July 18, 2018 Share #7 Posted July 18, 2018 - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.2-23739 UPDATE 1 - Loader version and model: JUN'S LOADER v1.03a2 - DS918+ - Using custom extra.lzma: NO - Installation type: BAREMETAL - ASROCK J3455-ITX - Additional comments: Board has 2 SATA ports only so two more 2 port cards added. Reboot is much faster than prior to update. This is quite a snappy unit now Quote Link to comment Share on other sites More sharing options...
ming0070913 Posted July 19, 2018 Share #8 Posted July 19, 2018 - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.2-23739 UPDATE 1 - Loader version and model: JUN'S LOADER v1.03a2 - DS918+ - Using custom extra.lzma: NO - Installation type: BAREMETAL - ASUS PRIME H310I-PLUS - Additional comments: Quote Link to comment Share on other sites More sharing options...
shadow Posted July 19, 2018 Share #9 Posted July 19, 2018 - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.2-23739 - Loader version and model: 1.03a2 - DS918+ - Using custom extra.lzma: NO - Installation type: BAREMETAL - GA-N3150N-D3V - Additional comments: REBOOT, OK! Quote Link to comment Share on other sites More sharing options...
Bi0 Posted July 19, 2018 Share #10 Posted July 19, 2018 Outcome of the update: SUCCESSFUL DSM version prior update: DSM 6.2-23739 UPDATE 1 Loader version and model: JUN'S LOADER v1.03a2 - DS918+ Using custom extra.lzma: NO Installation type: ESXi 6.5 Additional comments: REBOOT, OK! Quote Link to comment Share on other sites More sharing options...
marsb007 Posted July 20, 2018 Share #11 Posted July 20, 2018 - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.2-23739 UPDATE 1 - Loader version and model: JUN'S LOADER v1.03a2 - DS918+ - Using custom extra.lzma: NO - Installation type: BAREMETAL - ASROCK J4205-ITX - Additional comments: Everything is working fine. Quote Link to comment Share on other sites More sharing options...
rockvegas Posted July 21, 2018 Share #12 Posted July 21, 2018 - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.2-23739 UPDATE 1 - Loader version and model: JUN'S LOADER v1.03a2 - DS918+ - Using custom extra.lzma: NO - Installation type: BAREMETAL - Gigabyte Z370M D3H (Intel Core i3-8100) Quote Link to comment Share on other sites More sharing options...
StrayCat Posted July 23, 2018 Share #13 Posted July 23, 2018 - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.2-23739 UPDATE 1 - Loader version and model: JUN'S LOADER v1.03a2 - DS918+ - Using custom extra.lzma: NO - Installation type: BAREMETAL - ASROCK J4205-ITX - Additional comments: hardware transcoding does not work Quote Link to comment Share on other sites More sharing options...
Stefan Posted July 28, 2018 Share #14 Posted July 28, 2018 - Outcome of the update: UNSUCCESSFUL - DSM version prior update: DSM 6.2-23739 UPDATE 1 - Loader version and model: JUN'S LOADER v1.03a2 - DS918+ - Using custom extra.lzma: NO - Installation type: BAREMETAL - Fatal1ty AB350 Gaming-ITX/ac + AMD Ryzen 5 1600 - Additional comments: System stucks at the "Intro" Quote Link to comment Share on other sites More sharing options...
john_matrix Posted August 1, 2018 Share #15 Posted August 1, 2018 - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.1.7-15284 Update 2 (DS3615xs) - Loader version and model: JUN'S LOADER v1.03b - DS3617xs - Using custom extra.lzma: NO - Installation type: BAREMETAL - i5-661 and i5-3570 and HP Gen8 Xeon 1220 v2 Quote Link to comment Share on other sites More sharing options...
hoidoi Posted August 1, 2018 Share #16 Posted August 1, 2018 - Outcome of the update: UNSUCCESSFUL - DSM version prior update: DSM 6.1.7-15284 Update 1 - Loader version and model: JUN'S LOADER v1.03b - DS3615xs - Using custom extra.lzma: NO - Installation type: BAREMETAL - HP MicroServer Gen10 with AMD Opteron X3216 - Additional comments: The loader boot, but no network connection possible, router did not provide ip to NIC (Broadcom 5720) Quote Link to comment Share on other sites More sharing options...
Steven3743 Posted August 2, 2018 Share #17 Posted August 2, 2018 - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.1.7-15284 Update 2 - Loader version and model: JUN'S LOADER v1.03b - DS3617xs - Using custom extra.lzma: NO - Installation type: Bare Metal Gigabyte B75M-D3H with Intel E3-1245v2 - Additional comments: DiskStation cannot be found on LAN with UEFI mode, legacy bios work fine. Mellanox MNPA19-XTR not working before system installation done, have to use onboard LAN adapter for upgrade. Quote Link to comment Share on other sites More sharing options...
XPEH Posted August 2, 2018 Share #18 Posted August 2, 2018 - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.1.7-15284 Update 2 - Loader version and model: JUN'S LOADER v1.03b - DS3615xs - Using custom extra.lzma: NO - Installation type: BAREMETAL - HP N54L with additional Intel Dual 1Gb NIC - Additional comments: Migration and update to U2, MAC of the bond changed from builtin NIC to Intel NIC, but all three still visible and bond works. Quote Link to comment Share on other sites More sharing options...
arejaytee Posted August 3, 2018 Share #19 Posted August 3, 2018 - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.2-23739 UPDATE 1 - Loader version and model: JUN'S LOADER v1.03b - DS3617xs - Using custom extra.lzma: NO - Installation type: BAREMETAL - HP Microserver GEN 8 - Intel(R) Xeon(R) CPU E3-1220L V2 @ 2.30GHz - Additional comments: Blank install than updated 1 Quote Link to comment Share on other sites More sharing options...
PawPawRoo Posted August 3, 2018 Share #20 Posted August 3, 2018 - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.1.7-15284 Update 2 - Loader version and model: JUN'S LOADER v1.03b - DS3617xs - Using custom extra.lzma: NO - Installation type: VM - VirtualBox 5.2.16 (Host: Dell Latitude E7440, i5-4300U) - Additional comments: Reboot Required, migrated from JUN'S LOADER v1.02b - DS3617xs to DSM 6.2-23739 and updated to U2. Quote Link to comment Share on other sites More sharing options...
longcat Posted August 3, 2018 Share #21 Posted August 3, 2018 (edited) - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.1.7-15284 Update 2 - Loader version and model: JUN'S LOADER v1.03b - DS3617xs - Using custom extra.lzma: NO - Installation type: BAREMETAL - ASROCK J3455M with IBM Raid-Controller M1015 (IT-Mode) -> SAS-HDDs and two SSDs (SATA) for cache - Additional comments: Loading of the webinterface takes longer then before... Otherwise everything is up and running like before Edited August 3, 2018 by longcat Quote Link to comment Share on other sites More sharing options...
Hostilian Posted August 3, 2018 Share #22 Posted August 3, 2018 - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.1.7 (DS3615xs) - Loader version and model: JUN'S LOADER v1.03b - DS3617xs - Using custom extra.lzma: NO - Installation type: BAREMETAL - (old Dell Optiplex 755) - Additional comments: Upgraded from DS3615xs (DSM 6.1) to DS3617xs (DSM 6.2) without a problem - with Intel NIC.. - Outcome of the update: UNSUCCESSFUL - DSM version prior update: DSM 6.1.7 u2 (DS3617xs) - Loader version and model: JUN'S LOADER v1.03b - DS3617xs - Using custom extra.lzma: NO (is there one for 1.03b?) - Installation type: BAREMETAL - ASRock J3455, using realtek onboard NIC, 16GB RAM and 3x SATA disks (SSD, SSD, 3.5). - Additional comments: Failed to find on network following boot.. Will re-try with an Intel NIC.. Quote Link to comment Share on other sites More sharing options...
jeromim Posted August 3, 2018 Share #23 Posted August 3, 2018 - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.1.7-15284 Update 2 - Loader version and model: JUN'S LOADER v1.03b - DS3615xs - Using custom extra.lzma: NO - Installation type: BAREMETAL - DELL OPTIPLEX 9020 - Additional comments: None Quote Link to comment Share on other sites More sharing options...
RainbowShaggy Posted August 4, 2018 Share #24 Posted August 4, 2018 Outcome of the update: SUCCESSFUL DSM version prior update: DSM 6.2-23739 Update 1 Loader version and model: JUN'S LOADER v1.03b - DS3617xs Using custom extra.lzma: NO Installation type: VM - ESXi 6.5 Additional comments: REBOOT, OK! Quote Link to comment Share on other sites More sharing options...
civilmann Posted August 6, 2018 Share #25 Posted August 6, 2018 Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.1.7-15284 UPDATE 1 - Loader version and model: JUN'S LOADER v1.03b - DS3615xs - Using custom extra.lzma: NO - Installation type: BAREMETAL - HP N54L - Additional comments: Blank install as a test than updated via migration. All data intact all apps still loaded. New USB with new v1.03b custom grub.cfg Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.