Jump to content
XPEnology Community

john_matrix

Member
  • Posts

    110
  • Joined

  • Last visited

  • Days Won

    1

Everything posted by john_matrix

  1. Salut, Regarde du côté du loader ARC pour mettre à jour ton DSM vers la dernière 7.
  2. On my Synobox DSM 7.1.1-42962 Update 4: Is this process built-in DSM?
  3. Disregard my message, I was mistaken about CPU governor Xpenology. Indeed, I have set this parameters in Proxmox that will accept it without any issue.
  4. ondemand here and working normal. Noticed that energy consumption is lower with this mode (-10 to -15w approx.)
  5. Hello, Thank you again for this exceptionally well done loader. What is the correct way to update it from the loader menu? I was used to download the .img file and reset the model, serial, etc... but I would like to use the dedicated menu. Should I update everything from it and build the loader again? Or can I boot directly after updating everything? Thanks in advance!
  6. Salut, Si t'as fait la mise à jour via le panneau de configuration du NAS, c'est normal que le volume ne s'affiche plus, c'est une des protections que Synology avait mis en place pour éviter l'utilisation de loaders. Qu'est ce qu'il se passe avec les loaders qui ne peuvent pas booter ? un problème de clé USB ? Ton PC est une brouette mais comme le CPU supporte les instructions de virtualisation, peut être envisager de virtualiser le NAS par praticité d'emploi (à voir aussi la quantité de RAM que tu as).
  7. Have installed the module and everything is working out of the box (2TB HDD are connected to the module):
  8. Hello, I am currently upgrading my Proxmox node with a Ryzen CPU and I am facing issues for building DS1621+ loader: Can someone point me where I am mistaking? ./rploader.sh update now ./rploader.sh fullupgrade now ./rploader.sh serialgen DS1621+ ./rploader.sh identifyusb now ./rploader.sh satamap now ./rploader.sh ext v1000-7.1.0-42661 add https://github.com/pocopico/redpill-load/raw/develop/redpill-virtio/rpext-index.json ./rploader.sh ext v1000-7.1.0-42661 add https://raw.githubusercontent.com/dodo-dk/rp-ext/main/acpid/rpext-index.json ./rploader.sh backup now ./rploader.sh build v1000-7.1.0-42661 I have tried with DS3622xs+ and it works properly but I would like to keep same CPU brand. Many thanks!
  9. I have the first adapter in my desk for a future ITX build upgrade but haven't the time yet to test it. Saw some reviews on Reddit that says that it works properly.
  10. You can take a look on this page: https://www.synology.com/en-global/products
  11. Ca peut être un bon début Sinon une autre piste serait d'arrêter le process nvidia qui s'occupe de l'analyse vidéo (si tant est qu'il y en ai un séparé de Surveillance Station).
  12. Salut, Ca fait un moment que j'utilise des loaders pour Xpenology (et précédemment Synoboot, Tinyboot, etc... :D) L'intégration du NVA3221 tombe à point nommé car je viens de recevoir une troisième camera et je me posais justement la question de comment faire avec Surveillance Station, si il supportait les licences officielles ou non. Reste à voir pour le flood des logs si il n'y pas de GTX1650 présente (je suis sur du Proxmox v7) Les fonctions d'A.I. utilisées sont spécifiques à nvidia ou c'est des fonctions génériques ?
  13. Solved by adding the extension: ./rploader.sh add broadwellnk-7.0.1-42218 ext https://github.com/jumkey/redpill-load/raw/develop/redpill-virtio/rpext-index.json before compiling the kernel
  14. Hello, I am trying to compile a RedPill loader with the latest 0.4.5 build available but I am facing the issue that the NIC is not recognized. It's strange because I am using Proxmox and in the latest 0.4.4 virtio NIC drivers were embedded. If I type the command ./rploader ext broadwellnk-7.0.1-41228 auto, the NIC is detected but without any relevant module. I have tried with vmxnet3 and E1000 without success. Is anyone having the same issue?
  15. Will keep you informed, I have received a Ryzen 7 5700G and have a X470-I in spare Only miss the RAM
  16. Hi everyone, First of all I would like to thanks all of you for bringing us an updated version of the loader that works perfectly. I have a question, I plan to upgrade my Proxmox node where my DSM7 VM is currently running to a new one with a Ryzen CPU. Can someone confirm me that Ryzen CPUs can run RedPill loader without issues or is it better to stay with Intel platform? Many thanks in advance!
  17. Thanks for the feeback Is it still required to disable Internet connection during the installation/migration?
  18. Hello, I have upgraded my ds3615xs on Proxmox to DSM 7.0.1 with Redpill. Everything is working fine, only have noticed in the dmesg that the line: Loading kernel module for a network device with CAP_SYS_MODULE (deprecated). Use CAP_NET_ADMIN and alias netdev- instead. Is constantly repeating. The NIC is set as Virtio. Anyone have this behavior too?
  19. Thank you very much for your work, everything works flawlessly Only one thing that you can maybe add is for the Toolchain download, indeed for my first attempt, the download wasn't complete and the building script failed. Maybe you should add a hash check before the building process?
  20. - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.2.2-24922 Update 3 - Loader version and model: Jun's Loader v1.03B DS3615xs - Using custom extra.lzma: No - Installation type: VM - Proxmox 6.1.8 - Additional comment : NIC Intel e1000, Synoboot recognized as SATA drive
  21. Finally, I don't need to integrate the driver as the dongle is recognized "ouf-of-the-box" after activating the DVB feature in Video Station. Anyway thanks for your guide, it will be useful as personal skill :)
  22. Thank you very much! I would like to do the same for an August DVB-T202 (ID 048d:9006 Integrated Technology Express, Inc. IT9135 BDA Afatech DVB-T HDTV Dongle) with a DS3615xs loader. Do you think I can use the same walkthrough?
  23. You are right, as the E1000E cannot be selected from the WebUI of Proxmox it must be used a "args:" command in the VM config file. I have followed the instruction of the below post to display the E1000E NIC on the WebUI and set it to any "vmbrXX" but the transfert in the DSM is still false
  24. Hi everyone, I have installed 2 Proxmox nodes on differents places and on each one, I have created a DSM VM with a e1001e NIC. Everything is working flawlessly with the latest DSM available. The only thing that is not displayed correctly is the data transfert rate. For Proxmox users, have you ever noticied this? and have you find a way to display it correctly? Thanks in advance!
×
×
  • Create New...