Jump to content
XPEnology Community

hoidoi

Member
  • Posts

    41
  • Joined

  • Last visited

Everything posted by hoidoi

  1. I do not read the complete post, so someone could have written about this, but you can run geekbench in an docker container. Look for "davidsarkany-geekbench".
  2. hoidoi

    HP MicroServer gen10

    Some additional infos for all new HP NC360T owners. The MAC is on the front side, a small sticker on the right side with an barcode. It is the first number, beginning with 002655....
  3. hoidoi

    HP MicroServer gen10

    There is a sticker on the back of the card with the mac adress (i think it is). If there is no such sticker on yours, check the DHCP Server in your Router. I sold my Gen10 and bought an DS-1019+ (due to performance issues an non working hw transcoding in plex), so feel free to take my mac adress (via pm), i will never use the nic again...
  4. - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.2.1-23824 update 4 - Loader version and model: JUN'S LOADER v1.04b - DS918+ - Using custom extra.lzma: NO - Installation type: BAREMETAL - Gigabyte H110M-S2H / Pentium G4400 - Additional comments: Updated from DSM Control Panel, no reboot necessary - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.2.1-23824 update 4 - Loader version and model: JUN'S LOADER v1.03b - DS3615xs - Using custom extra.lzma: NO - Installation type: BAREMETAL - HP MicroServer Gen10 with AMD Opteron X3216 - Additional comments: HP NC360T Dual NIC, no reboot necessary
  5. I have quit working with Loader 1.04b/DS918+ because of the really annoying performance and swiched back to 1.03b/DS3615xs. Now my geekbench results are 1921 / 3013 compared to poor 956 / 1396 before. Also copy speed to usb ist twice as fast. The last plus for DS918+, the NVMe Cache, didn't work, because my Samsung PM981 was not recognized by DSM (and also not on my Pentium G4400 test system). @x01015918 i have spend some time with different bios settings and found no way to check if cpu boost is working at all.
  6. AMD uses the following bios settings for CPU Boost: "STAPM Boost" and "SMU System Configuration". For SMU i can choose 12W or 15W or auto, 15W is set, i try auto, STAMP ist set to enabled. cat /proc/cpuinfo show the following (for both cores the informations are qual): processor : 0 vendor_id : AuthenticAMD cpu family : 21 model : 96 model name : AMD Opteron(tm) X3216 APU stepping : 1 cpu MHz : 1600.000 cache size : 1024 KB physical id : 0 siblings : 1 core id : 0 cpu cores : 1 apicid : 0 initial apicid : 0 fpu : yes fpu_exception : yes cpuid level : 13 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm nopl aperfmperf eagerfpu pni pclmulqdq monitor ssse3 fma cx16 sse4_1 sse4_2 movbe popcnt aes xsave avx f16c rdrand lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs xop skinit wdt lwp fma4 tce nodeid_msr tbm topoext perfctr_core perfctr_nb bpext mwaitx arat cpb hw_pstate retpoline npt lbrv svm_lock nrip_save tsc_scale vmcb_clean flushbyasid decodeassists pausefilter pfthreshold fsgsbase bmi1 avx2 smep bmi2 xsaveopt bugs : cpu_meltdown spectre_v1 spectre_v2 bogomips : 3193.91 TLB size : 1536 4K pages clflush size : 64 cache_alignment : 64 address sizes : 48 bits physical, 48 bits virtual power management: ts ttp tm 100mhzsteps hwpstate cpb eff_freq_ro [12] [13]
  7. Max Speed: 1600 MHz Current Speed: 1600 MHz after echo "1" | sudo..... an reboot still Max Speed: 1600 MHz Current Speed: 1600 MHz
  8. Nope, CPU burst is not working, i am getting only 956 / 1396. HW Transcoding is not working either (im getting an "SN format mismatch" error), copy to USB 3.0 runs only with 60+ MB/s instead of 130 MB/s, there is still a lot to do here...
  9. - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.2.1-23824 update 1 - Loader version and model: JUN'S LOADER v1.04b - DS918+ - Using custom extra.lzma: NO - Installation type: BAREMETAL - HP MicroServer Gen10 with AMD Opteron X3216 - Additional comments: HP NC360T Dual NIC, Boot from external USB Socket necessary, NVMe SSD not working
  10. I had a Error 13 issue with an Gen10. So maybe it's no solution für Gen8, but it is worth a try. My installation of DSM 6.2.1 failed with Loader 1.04b because i used the internal USB socket and had activated ehci & xhci handoff. So, even when Gen8 Machines don't have USB3 and xhci, you can try one of the external USB and deactivate ehci handoff.
  11. My HP Gen10 has an Onboard SE9230 and still a running warranty, so i am cautious flashing "non HP" firmware. Nethertheless, i checked the controller and my system already has a newer firmware revision. But... thanks to @reizhi i tried to boot from an external usb. With deactivated ehci & xhci handoff it worked and i could install 1.04b with 918+ and DSM 6.2.1 23824 U4. Sadly, my NVMe SSD still is not recognized by dsm.
  12. hoidoi

    HP MicroServer gen10

    Small Update: Installation of DS918+/1.04b works with external usb, i had to disable ehci and xhci handoff for installation.
  13. hoidoi

    HP MicroServer gen10

    Well, external usb port did not help, i still get the error 13.
  14. hoidoi

    HP MicroServer gen10

    @reizhi Thanks! i try this evening with external usb. To be honest, i never thought about this... @atlast I have an HP NC360T Dual NIC and also an Intel 1000 CT, sadly these cards doesn't change the Error 13 issue with 1.04b. But, after all, i could install DSM 6.2.1 with Loader 1.03b for DS3615xs.
  15. Hat einer von Euch vielleicht schon einmal den 1.04b Loader über die grub so bearbeitet, dass das log statt an COM1 direkt auf dem Bildschirm ausgegeben wird? Mein HP Microsorver Gen10 hat leider keinen COM-Port und ich würde zu gerne sehen, an welchem Punkt die Installation von DSM 6.2.1 scheitert und welche Treiber geladen werden. Im Synology Assistant wird der Fehler 13 angezeigt (und ja PIC/VID sind korrekt). Dass die Festplatte dort erkannt wird, bedeutet ja noch lange nicht, dass der Marvell 88SE9230 wirklich korrekt mit einem Treiber versehen wird. Ich habe zwar eine extra.lzma mit hier im Forum angebotenen Marvel Treibern kompiliert, jedoch scheint dies nicht so ganz geklappt zu haben, da die HP NC360T Netzwerkkarte dann nicht korrekt arbeitet und somit die ganze extra.lzma wohl am Arsch ist. Dies wäre eine alternative Frage: Kann jemand die extra.lzma aus dem Loader 1.04b für DS918+ mit einem zusätzlichen Treiber https://xpenology.com/forum/applications/core/interface/file/attachment.php?id=4057 versehen? Wie gesagt, ich hab's wohl vergeigt. Ich hab zwar ein lauffähiges System mit 1.03b/DS3615xs, aber leider wird dort meine NVMe-SSD nicht erkannt, daher der Versuch auf 918+ umzusatteln. Danke im Voraus für Ideen und Hilfe. SYSTEM: HP Microserver Gen10 CPU: Opteron X3216 RAM: 8GB DDR4-2400 Loader: Jun's Loader 1.03b DS3615xs DSM: 6.2.1-23824-U4
  16. @sebelec do you have deactivated the internal nic? My dsm 6.2.1 did not show the internal (Not working) Broadcom interfaces, but counted them in the pic devices list. So, just an idea, when your grub contains only nic1 and one MAC, dsm could use this entry for the bad nic and have just no mojo (MAC ressources) for the additional HP NC360T.
  17. @bearcat i had some free minutes too: HP Microserver Gen10, 1.03b DS3615xs DSM 6.2.1-23824 Update 4 & deactivated Broadcom internal NIC's & Intel 1000 CT Desktop Adapter: Aleksander@NAS:~$ lspci | grep 0200 0000:02:00.0 Class 0200: Device 8086:10d3 Aleksander@NAS:~$ ethtool -i eth0 driver: e1000e version: 3.3.4-NAPI firmware-version: 1.8-0 bus-info: 0000:02:00.0 supports-statistics: yes supports-test: yes supports-eeprom-access: yes supports-register-dump: yes supports-priv-flags: no Next step will be activation of the internal Broadcom NIC's because the low profile bracket for the Intel NIC is MIA. I will post the putty outcome.
  18. Thank you very much! HP Gen10 & DS3615xs 1.03b & Intel 1000 CT Desktop Adapter let me update to a working DSM 6.2.1.
  19. You have to connect via putty to your nas (prior you have to activate ssh in "Terminal & SMNP"). When you are in terminal screen, after logon just enter "lspci" and a list of pci deviced is shown. Intel has the manufacutrer code 8086, so you can identify an Intel NIC.
  20. @flyride I checked the ID of my Intel 1000 CT an it is on the List: 10D3. I used it today on my Intel Test System and it worked directly without any stupid errors. So there was an issue with the following combination: HP Microserver Gen10 (X3216), Loader 1.03b for DS3617xs an DSM 6.2.1 with or without the dedicated Intel NIC. Thanks to @bearcat i made one more try with Loader 1.03b for DS3615xs and tadaa: The HP Death Star is fully operational with DSM 6.2.1. I still have to migrate my existing data from 3617xs, but this should work. To complete my list from here: - Outcome of the installation/update: SUCCESSFUL - DSM version prior update: DSM 6.2-23739 Update 2 - Loader version and model: JUN'S LOADER v1.03b - DS3615xs - Using custom extra.lzma: NO - Installation type: Baremetal - HP Microserver Gen10 - Additional comments: Intel 1000 CT Desktop Adapter / Deactivated internal NIC's
  21. @bearcat The Gen10 is at home now, so i will test it later. But meanwhile I could verify the NIC in my H110/G4400 Testsystem. Loader 1.03b / DS3617xs and Loader 1.04b / 918+ both worked very well.
  22. Good Morning bearcat, the nic i have is also an EXPI9301CTBLK. I use 6.2 with Jun's 1.03b DS3617xs. Its not such a great loss, i got this card from a colleague. The HP NC360T should arrive next week, so i will test further, but I have a rising suspicion that there is just some kind of wierd incompatibility between the Gen10 and 6.2.1. For now i am testing my whole collection of boot images (and the Intel 1000 CT) on an H110/Pentium G440.
  23. I gonna Check this tomorrow. Thank a lot!
  24. I known its not an N54L but today i tried Intel 1000 CT Desktop Adapter, but after the Upgrade to 6.2.1 on my Gen10 even this NIC did not work anymore. Do you known the SKU of your card? Found an NC360T on eBay. I give her a try.
×
×
  • Create New...