SpiderPOH Posted February 10, 2023 Share #4551 Posted February 10, 2023 3.partition from TCRP to small ./rploader.sh build ds918p-7.1.1-42962 they will show me some information but the last was "No adequate space on /mnt/sde3/auxfiles to download file into cache folder, clean up the space and restart" It was a 16GB USB stick !!! but if i make df -h i will see Filesystem Size Used Avail Use Mounted on rootfs 15G 210M 14G 2% / tmpfs 7.9G 0 7.9G 0% /dev/shm /dev/sda3 899M 899M 0 100% /mnt/sde3 any solution ? Quote Link to comment Share on other sites More sharing options...
blindspot Posted February 10, 2023 Share #4552 Posted February 10, 2023 (edited) @SpiderPOH 8 minutes ago, SpiderPOH said: clean up the space and restart on /mnt/sde3/auxfiles ./rploader.sh clean rm -rf /mnt/sde3/auxfiles Edited February 10, 2023 by blindspot 1 Quote Link to comment Share on other sites More sharing options...
loveburn Posted February 12, 2023 Share #4553 Posted February 12, 2023 success update to U4 from U3 ! 1 Quote Link to comment Share on other sites More sharing options...
alirz1 Posted February 13, 2023 Share #4554 Posted February 13, 2023 On 2/12/2023 at 4:03 AM, loveburn said: success update to U4 from U3 ! Does TCRP support U4 or you simply update and just run the postupgrade for 42962? Quote Link to comment Share on other sites More sharing options...
apriliars3 Posted February 13, 2023 Share #4555 Posted February 13, 2023 Does TCRP support U4 or you simply update and just run the postupgrade for 42962?Postupdate is not necessary if you have TCRP Friend. Quote Link to comment Share on other sites More sharing options...
Kaneske Posted February 13, 2023 Share #4556 Posted February 13, 2023 (edited) @alirz1 i am on ESXi with both of my Machines ARPL does it on the fly on my 6.5 (for NIC reasons) TCRP on my 8.0 System went through -4 update manually fine with: ./rploader.sh update ./rploader.sh postupdate … … after first reboot of DSM when the update was applied via GUI manually Edited February 13, 2023 by Kaneske Quote Link to comment Share on other sites More sharing options...
Andy Miller Posted February 14, 2023 Share #4557 Posted February 14, 2023 On 1/23/2023 at 4:30 AM, Aigor said: Try to disable two of them, or remove 10Gbit card I had to do to install my xpenology on Gen 8 microserver Kinda defeats the purpose. I have a dual 10g intel card and a 10g unifi switch. why would i want to remove it? Is there another way i can get the intel card working?? i have disabled all the onboard intel gigabit nics in bios, the only ones presented to xpenology are the 2 10g connections on the x520 card but im never able to find it on the network? Quote Link to comment Share on other sites More sharing options...
Andy Miller Posted February 14, 2023 Share #4558 Posted February 14, 2023 On 2/1/2023 at 1:51 AM, Peter Suh said: @cferra By any chance, the meaning of deleting the line with "disable 10g nic" in xml means to delete the line "support_bde_internal_10g": "no", in user_config.json? Is this something i should be doing to enable 10g networking on a 3622xs? Quote Link to comment Share on other sites More sharing options...
Aigor Posted February 14, 2023 Share #4559 Posted February 14, 2023 2 hours ago, Andy Miller said: Kinda defeats the purpose. I have a dual 10g intel card and a 10g unifi switch. why would i want to remove it? Is there another way i can get the intel card working?? i have disabled all the onboard intel gigabit nics in bios, the only ones presented to xpenology are the 2 10g connections on the x520 card but im never able to find it on the network? Not removing, simply disabling until the installation ends Install without card, shutdown server, reinstall card, reboot Quote Link to comment Share on other sites More sharing options...
Andy Miller Posted February 15, 2023 Share #4560 Posted February 15, 2023 9 hours ago, Aigor said: Not removing, simply disabling until the installation ends Install without card, shutdown server, reinstall card, reboot Will try that. many thanks. 1 Quote Link to comment Share on other sites More sharing options...
Peter Suh Posted February 25, 2023 Share #4561 Posted February 25, 2023 (edited) Copy the integrated module pack (ARPL MODULES), which is the most core function of ARPL, to /lib/modules It has a function that dynamically and automatically recognizes various devices and processes up to module injection. At the heart of this feature is something called EUDEV. EUDEV is as follows. I wanted to apply this EUDEV to TCRP as I heard from pocopico and fabio, but in a state where the concept was not established It was difficult to apply to M SHELL for TCRP at first glance. Pocopico started in August of last year, but it seems that he ported this EUDEV from ARPL version to TCRP for TCRP about 3 weeks ago to complete the usable level. https://github.com/pocopico/rp-ext/tree/main/eudev There was a slight bug where the EUDEV daemon loading did not run, but it was corrected to work properly by solving the cause. So far, the method I have applied to M SHELL is the method in which ARPL's integrated module pack is used by TCRP for automatic device discovery. Based on VID / PID analyzed by lspci command This is a method of injecting matching modules one by one by comparing pre-prepared modules.alias.4.json files. If this is handled statically, even if the integrated module pack is prepared, if modules.alias.4.json is not prepared, the module cannot be installed. Could the opposite be the case? Since the two developers are different, there were enough possibilities for omissions in two places. Now, it is possible to handle modules dynamically like ARPL in TCRP only with EUDEV, out of the way of statically referencing the modules.alias.4.json file. As long as the module.ko file, which is the ARPL integrated module list file, exists for each platform in the path below and EUDEV detects the device normally, all devices are loaded without missing drivers. https://github.com/fbelavenuto/arpl-modules To use this method, you need to rebuild the loader with M SHELL for TCRP. M SHELL for TCRP also faces a new phase in the module loading method today, and I think it is a meaningful transition for me as well. Please feel free to tell me about any bugs or improvements while using the new version. https://github.com/PeterSuh-Q3/tcrp-modules thank you @pocopico, @fbelavenuto Edited February 25, 2023 by Peter Suh 1 Quote Link to comment Share on other sites More sharing options...
hogsyno Posted February 26, 2023 Share #4562 Posted February 26, 2023 Hi i have a little problems for HDD Storage I'm using Vmware Workstation 16 & Tiny Redpill Loader v0.9.4.0 DSM_DS3617xs_42962 I'm created about 6 HDD, but in synology just only recives 4 HDD. And my HDD start Drives is 12 not start 01 Like Image 01: Added the first HDD and Start at 12 https://imgur.com/a/5D4XTs2 Like Image 02: Added more 4 HDD (total 5) https://imgur.com/ymYDenG Like Image 03: in Synology just see only 4 HDD can use https://imgur.com/undefined Quote Link to comment Share on other sites More sharing options...
Mary Andrea Posted March 3, 2023 Share #4563 Posted March 3, 2023 (edited) On 12/9/2022 at 12:51 PM, Jizar Stoffel said: my Drive 8 have been crashing non-stop. I have already Replace the drive with brand new ones many times (4 to be exact). and everytime I try to repair the Storagepool, Some times is not HDD problem , a few could be a weak cable connection (micro cut power). Pls. before change your disk, try to change cable Sata/Power among disk and test if continue problem. My solution was --> Edited March 3, 2023 by Mary Andrea Quote Link to comment Share on other sites More sharing options...
sc_lodestar Posted March 3, 2023 Share #4564 Posted March 3, 2023 Hi all when I build ds918p-7.1.1-42962, I get an error: ------------- tc@box:~$ ./rploader.sh build ds918p-7.1.1-42962 Rploader Version : 0.9.4.3 COMPILE_METHOD : toolkit_dev TARGET_PLATFORM : ds918p TARGET_VERSION : 7.1.1 TARGET_REVISION : 42962 REDPILL_LKM_MAKE_TARGET : test-v7 KERNEL_MAJOR : 4 MODULE_ALIAS_FILE : modules.alias.4.json SYNOMODEL : ds918p_42962 MODEL : DS918+ Local Cache Folder : /mnt/sda3/auxfiles DATE Internet : 03032023 Local : 03032023 Checking Internet Access -> OK Checking if a newer version exists on the main repo -> Version is current Redpill sources already downloaded, pulling latest Already up to date. Loader sources already downloaded, pulling latest Already up to date. -- -- Getting file https://raw.githubusercontent.com/pocopico/rp-ext/master/redpillprod/releases/redpill-4.4.180plus.tgz Extracting module Getting file https://raw.githubusercontent.com/pocopico/rp-ext/master/redpillprod/src/check-redpill.sh Got redpill-linux-v4.4.180+.ko Testing modules.alias.4.json -> File OK ------------------------------------------------------------------------------------------------ It looks that you will need the following modules : Found IDE Controller : pciid 8086d00007111 Required Extension : ata_piix ata_piix Searching for matching extension for ata_piix Found --- --- [#] Checking runtime for required tools... [OK] [#] Adding new extension from https://raw.githubusercontent.com/pocopico/rp-ext/master/e1000e/rpext-index.json... [#] Downloading remote file https://raw.githubusercontent.com/pocopico/rp-ext/master/e1000e/rpext-index.json to /home/tc/redpill-load/custom/extensions/_new_ext_index.tmp_json ######################################################################## 100.0% [!] Extension is already added (index exists at /home/tc/redpill-load/custom/extensions/pocopico.e1000e/pocopico.e1000e.json). For more info use "ext-manager.sh info pocopico.e1000e" *** Process will exit *** Found Ethernet Interface : pciid 8086d000010d3 Required Extension : e1000e Searching for matching extension for e1000e Found matching extension : "https://raw.githubusercontent.com/pocopico/rp-ext/master/e1000e/rpext-index.json" ------------------------------------------------------------------------------------------------ Starting loader creation ..... .... .... .... [#] Extension redpill-misc for ds918p_42962 platform is already up to date [#] Updating ds918p_42962 platforms extensions... [OK] [#] Checking runtime for required tools... [OK] [#] Updating extensions... [#] Checking runtime for required tools... [OK] [#] Adding new extension from https://github.com/pocopico/rp-ext/raw/main/redpill-boot-wait/rpext-index.json... [#] Downloading remote file https://github.com/pocopico/rp-ext/raw/main/redpill-boot-wait/rpext-index.json to /home/tc/redpill-load/custom/extensions/_new_ext_index.tmp_json curl: (7) Failed to connect to raw.githubusercontent.com port 443: Connection refused [!] Failed to download https://github.com/pocopico/rp-ext/raw/main/redpill-boot-wait/rpext-index.json to /home/tc/redpill-load/custom/extensions/_new_ext_index.tmp_json *** Process will exit *** [!] Failed to add "https://github.com/pocopico/rp-ext/raw/main/redpill-boot-wait/rpext-index.json" as an extension: , *** Process will exit *** [!] Failed to install redpill.bootwait bundled extension - see errors above *** Process will exit *** FAILED : Loader creation failed check the output for any errors --------------- I use a proxy to connnect to github.com and it works fine as I has downloaded the above files except the error json file any solution or advice?? Quote Link to comment Share on other sites More sharing options...
blindspot Posted March 3, 2023 Share #4565 Posted March 3, 2023 (edited) @pocopico Hi. I'm trying to build DS923 v7.1.1-42962 but I have the following error: Rploader Version : 0.9.4.0 .... [-] The extension pocopico.e1000e was found. However, the extension index has no recipe for ds923p_42962 platform. It may not be [-] supported on that platform, or author didn't updated it for that platform yet. You can try running [-] "ext-manager.sh update" to refresh indexes for all extensions manually. Below are the currently known information about [-] the extension stored locally: [#] ========================================== pocopico.e1000e ========================================== [#] Extension name: e1000e [#] Description: Adds Intel(R) PRO/1000 Network Driver Support ... [-] Failed to update recipe for pocopico.e1000e extension for platform ds923p_42962. The script will terminate as you do not [-] have previously downloaded recipe which can be used if download fails. Try again later. If problem [-] persists contact the extension packer for support (displayed below) *** Process will exit *** Same on Rploader Version : 0.9.4.3 after update and fullupgrade For DS920, DS1621, latest version, the build process works fine If I add the ext manualy, it works without error Spoiler ./rploader.sh ext ds923p-7.1.1-42962 add "https://raw.githubusercontent.com/pocopico/rp-ext/master/e1000e/rpext-index. json" Rploader Version : 0.9.4.3 Loader source : https://github.com/pocopico/redpill-load.git Loader Branch : develop Redpill module source : https://github.com/pocopico/redpill-lkm.git : Redpill module branch : master Extensions : redpill-misc dtbpatch Extensions URL : "https://github.com/pocopico/redpill-load/raw/develop/redpill-misc/rpext-index.json", "https://github.com/pocopico/rp-ext/raw/main/dtbpatch/rpext-index.json" TOOLKIT_URL : https://sourceforge.net/projects/dsgpl/files/toolkit/DSM7.0/ds.denverton-7.0.dev.txz/download TOOLKIT_SHA : 6dc6818bad28daff4b3b8d27b5e12d0565b65ee60ac17e55c36d913462079f57 SYNOKERNEL_URL : https://sourceforge.net/projects/dsgpl/files/Synology NAS GPL Source/25426branch/denverton-source/linux-4.4.x.txz/download SYNOKERNEL_SHA : d3e85eb80f16a83244fcae6016ab6783cd8ac55e3af2b4240455261396e1e1be COMPILE_METHOD : toolkit_dev TARGET_PLATFORM : ds923p TARGET_VERSION : 7.1.1 TARGET_REVISION : 42962 REDPILL_LKM_MAKE_TARGET : dev-v7 KERNEL_MAJOR : 4 MODULE_ALIAS_FILE : modules.alias.4.json SYNOMODEL : ds923p_42962 MODEL : DS923+ Local Cache Folder : /mnt/sda3/auxfiles DATE Internet : 03032023 Local : 03032023 Checking Internet Access -> OK Cloning into 'redpill-lkm'... remote: Enumerating objects: 1597, done. remote: Total 1597 (delta 0), reused 0 (delta 0), pack-reused 1597 Receiving objects: 100% (1597/1597), 6.03 MiB | 8.42 MiB/s, done. Resolving deltas: 100% (961/961), done. Cloning into 'redpill-load'... remote: Enumerating objects: 3036, done. remote: Total 3036 (delta 0), reused 0 (delta 0), pack-reused 3036 Receiving objects: 100% (3036/3036), 118.52 MiB | 11.75 MiB/s, done. Resolving deltas: 100% (1489/1489), done. [#] Checking runtime for required tools... [OK] [#] Adding new extension from https://raw.githubusercontent.com/pocopico/rp-ext/master/e1000e/rpext-index.json... [#] Downloading remote file https://raw.githubusercontent.com/pocopico/rp-ext/master/e1000e/rpext-index.json to /home/tc/redpill-load/custom/extensions/_new_ext_index.tmp_json ######################################################################################################################### 100.0% [OK] [#] ========================================== pocopico.e1000e ========================================== [#] Extension name: e1000e [#] Description: Adds Intel(R) PRO/1000 Network Driver Support [#] To get help visit: <todo> [#] Extension preparer/packer: https://github.com/pocopico/rp-ext/tree/main/e1000e [#] Software author: https://github.com/pocopico [#] Update URL: https://raw.githubusercontent.com/pocopico/rp-ext/master/e1000e/rpext-index.json [#] Platforms supported: ds1621p_42218 ds1621p_42951 ds918p_41890 dva3221_42661 ds3617xs_42621 ds3617xs_42218 ds920p_42661 dva3221_42962 ds918p_42661 ds3622xsp_42962 ds3617xs_42951 dva1622_42218 dva1622_42621 ds920p_42962 ds1621p_42661 dva1622_42951 ds918p_25556 dva3221_42218 ds3615xs_42661 dva3221_42951 ds3622xsp_42661 ds2422p_42661 ds3622xsp_42218 ds2422p_42962 rs4021xsp_42621 dva1622_42962 ds2422p_42218 rs4021xsp_42962 dva3221_42621 ds3615xs_42962 ds3617xs_42962 ds3615xs_41222 ds920p_42951 rs4021xsp_42218 ds2422p_42951 ds918p_42621 ds3617xs_42661 ds3615xs_25556 ds920p_42218 rs4021xsp_42951 ds920p_42621 ds918p_42962 ds3615xs_42951 ds3622xsp_42951 dva1622_42661 ds918p_42218 ds2422p_42621 ds1621p_42621 ds3615xs_42621 ds3615xs_42218 ds1621p_42962 ds3622xsp_42621 rs4021xsp_42661 [#] ======================================================================================= Thanks Edited March 3, 2023 by blindspot Quote Link to comment Share on other sites More sharing options...
sc_lodestar Posted March 4, 2023 Share #4566 Posted March 4, 2023 12 hours ago, sc_lodestar said: Hi all when I build ds918p-7.1.1-42962, I get an error: ------------- tc@box:~$ ./rploader.sh build ds918p-7.1.1-42962 Rploader Version : 0.9.4.3 COMPILE_METHOD : toolkit_dev TARGET_PLATFORM : ds918p TARGET_VERSION : 7.1.1 TARGET_REVISION : 42962 REDPILL_LKM_MAKE_TARGET : test-v7 KERNEL_MAJOR : 4 MODULE_ALIAS_FILE : modules.alias.4.json SYNOMODEL : ds918p_42962 MODEL : DS918+ Local Cache Folder : /mnt/sda3/auxfiles DATE Internet : 03032023 Local : 03032023 Checking Internet Access -> OK Checking if a newer version exists on the main repo -> Version is current Redpill sources already downloaded, pulling latest Already up to date. Loader sources already downloaded, pulling latest Already up to date. -- -- Getting file https://raw.githubusercontent.com/pocopico/rp-ext/master/redpillprod/releases/redpill-4.4.180plus.tgz Extracting module Getting file https://raw.githubusercontent.com/pocopico/rp-ext/master/redpillprod/src/check-redpill.sh Got redpill-linux-v4.4.180+.ko Testing modules.alias.4.json -> File OK ------------------------------------------------------------------------------------------------ It looks that you will need the following modules : Found IDE Controller : pciid 8086d00007111 Required Extension : ata_piix ata_piix Searching for matching extension for ata_piix Found --- --- [#] Checking runtime for required tools... [OK] [#] Adding new extension from https://raw.githubusercontent.com/pocopico/rp-ext/master/e1000e/rpext-index.json... [#] Downloading remote file https://raw.githubusercontent.com/pocopico/rp-ext/master/e1000e/rpext-index.json to /home/tc/redpill-load/custom/extensions/_new_ext_index.tmp_json ######################################################################## 100.0% [!] Extension is already added (index exists at /home/tc/redpill-load/custom/extensions/pocopico.e1000e/pocopico.e1000e.json). For more info use "ext-manager.sh info pocopico.e1000e" *** Process will exit *** Found Ethernet Interface : pciid 8086d000010d3 Required Extension : e1000e Searching for matching extension for e1000e Found matching extension : "https://raw.githubusercontent.com/pocopico/rp-ext/master/e1000e/rpext-index.json" ------------------------------------------------------------------------------------------------ Starting loader creation ..... .... .... .... [#] Extension redpill-misc for ds918p_42962 platform is already up to date [#] Updating ds918p_42962 platforms extensions... [OK] [#] Checking runtime for required tools... [OK] [#] Updating extensions... [#] Checking runtime for required tools... [OK] [#] Adding new extension from https://github.com/pocopico/rp-ext/raw/main/redpill-boot-wait/rpext-index.json... [#] Downloading remote file https://github.com/pocopico/rp-ext/raw/main/redpill-boot-wait/rpext-index.json to /home/tc/redpill-load/custom/extensions/_new_ext_index.tmp_json curl: (7) Failed to connect to raw.githubusercontent.com port 443: Connection refused [!] Failed to download https://github.com/pocopico/rp-ext/raw/main/redpill-boot-wait/rpext-index.json to /home/tc/redpill-load/custom/extensions/_new_ext_index.tmp_json *** Process will exit *** [!] Failed to add "https://github.com/pocopico/rp-ext/raw/main/redpill-boot-wait/rpext-index.json" as an extension: , *** Process will exit *** [!] Failed to install redpill.bootwait bundled extension - see errors above *** Process will exit *** FAILED : Loader creation failed check the output for any errors --------------- I use a proxy to connnect to github.com and it works fine as I has downloaded the above files except the error json file any solution or advice?? change network connection and it goes well. 1 Quote Link to comment Share on other sites More sharing options...
hogsyno Posted March 4, 2023 Share #4567 Posted March 4, 2023 Hi do you know how can add more 4 hdd? I'm using Vmware Workstation 16 & Tiny Redpill Loader v0.9.4.0 DSM_DS3617xs_42962 I'm created about 6 HDD, but in synology just only recives 4 HDD. And my HDD start Drives is 12 not start 01 thanks you guys Quote Link to comment Share on other sites More sharing options...
hogsyno Posted March 4, 2023 Share #4568 Posted March 4, 2023 1 hour ago, sc_lodestar said: change network connection and it goes well. Hi do you know how can add more 4 hdd? I'm using Vmware Workstation 16 & Tiny Redpill Loader v0.9.4.0 DSM_DS3617xs_42962 I'm created about 6 HDD, but in synology just only recives 4 HDD. And my HDD start Drives is 12 not start 01 thanks you guys Quote Link to comment Share on other sites More sharing options...
Igareok Posted March 4, 2023 Share #4569 Posted March 4, 2023 Hello. I need to use DSM 7.0.1 I try to build loader for DS3615, or DS3622xs+, but its end with same error> [#] PAT file /home/tc/redpill-load/cache/ds3622xsp_42218.pat not found - downloading from https://global.download.synology.com/download/DSM/release/7.0.1/42218/DSM_DS3622xs+_42218.pat % Total % Received % Xferd Average Speed Time Time Time Current Dload Upload Total Spent Left Speed 100 389M 100 389M 0 0 10.3M 0 0:00:37 0:00:37 --:--:-- 11.4M [#] Verifying /home/tc/redpill-load/cache/ds3622xsp_42218.pat file... [ERR] [!] Checksum mismatch - expected f38329b8cdc5824a8f01fb1e377d3b1b6bd23da365142a01e2158beff5b8a424 but computed a222d37f369d71042057ccb592f40c7c81e9b988a95d69fa166c7c2a611da99c *** Process will exit *** FAILED : Loader creation failed check the output for any errors And this problem persist only on 7.0.1-42218 and 7.0.1-42218-JUN version. Tried different USB sticks, different loader versions, different motherboards, every time - same error. Please help. Quote Link to comment Share on other sites More sharing options...
SecundiS Posted March 4, 2023 Share #4570 Posted March 4, 2023 Good day. I need help with discover additional hard drives in my system. I have: Supermicro 4U case with 16HDD Bays Supermicro X9DRH-iF motherboard (Specs) 2x Xeon e5-2620v2 Processors 64Gb DDR3 ECC REG ASMEDIA PCI-E to 20x SATA port controller 6x HDD WD4000F9YZ and 5x HDD SD4000DM00 (11 total) I attempt to install latest TCRP with PeterSuh's M-Shell (Friend Mode). I choose RS4021xs+ build, paste serial and mac's but after build and first boot i didn't see all my disks and see only 7 HDD's In user_config i see parameter "max_disks=16" and understood that DSM scan sata slots on motherboard first, but that motherboard have 10 sata slots (8x SATA2 and 2 SATA3). For this reason i use Asmedia controller with 20x SATA3 port and all disks connected to that controller. I attempt to modify max_disks parameter with value 30, but DSM again show me only 7 HDD's Can you help me to solve that problem, please Quote Link to comment Share on other sites More sharing options...
blindspot Posted March 4, 2023 Share #4571 Posted March 4, 2023 18 minutes ago, SecundiS said: For this reason i use Asmedia controller with 20x SATA3 port and all disks connected to that controller. If this controller have multiplexed sata ports, DSM wont see all drives connected. Quote Link to comment Share on other sites More sharing options...
SecundiS Posted March 4, 2023 Share #4572 Posted March 4, 2023 9 часов назад, blindspot сказал: If this controller have multiplexed sata ports, DSM wont see all drives connected. Hello and thank you for response. What it is and how i can check that? Quote Link to comment Share on other sites More sharing options...
blindspot Posted March 5, 2023 Share #4573 Posted March 5, 2023 18 hours ago, SecundiS said: For this reason i use Asmedia controller with 20x SATA3 port and all disks connected to that controller. Hi. Boot into a live linux distro, eg ubuntu or fedora and see which drives that distro is detecting. Usually boards with more than one chipset on it eg ASMedia 106x and JMB58x have multiplier sata ports. But you might check on this Quote Link to comment Share on other sites More sharing options...
Franology Posted March 5, 2023 Share #4574 Posted March 5, 2023 On 4/15/2022 at 9:12 PM, billat29 said: You can add this to user_config.json: { "extra_cmdline": { "pid": "0x4200", "vid": "0x13fe", "sn": "xxxxxxxxx", "mac1": "xxxxxxxx", "SataPortMap": "42", "DiskIdxMap": "0002", "disable_mtrr_trim": null } This worked on my N54L Hi, I have also a N54L with 16GB, DSM 7.1.1-42962 Update 2 and redpill. I have changed the user_config.json file on the third partition of the USB drive, but when I restart DSM it still reserves 12GB of RAM. Is it enough to set the value as you indicate? Will it be 1 instead of null? Thank you very much. Quote Link to comment Share on other sites More sharing options...
billat29 Posted March 6, 2023 Share #4575 Posted March 6, 2023 (edited) 16 hours ago, Franology said: Hi, I have also a N54L with 16GB, DSM 7.1.1-42962 Update 2 and redpill. I have changed the user_config.json file on the third partition of the USB drive, but when I restart DSM it still reserves 12GB of RAM. Is it enough to set the value as you indicate? Will it be 1 instead of null? Thank you very much. null means just pass the parameter without a value which is what we want to do. ie. disable_mtrr_trim rather than disable_mttr_trim=1 However, having made that change you need to rebuild the loader for it to take effect. I cannot say whether the version of user_config.json you have changed is the correct one or a backup. So I would reboot the N54L selecting the option for loader build and go from there. Edited March 6, 2023 by billat29 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.