Decebalus Posted December 4, 2022 Share #4476 Posted December 4, 2022 On 12/3/2022 at 6:15 AM, altas said: same to me... Build the Boot Loader with TCRP is working but Boot into DSM with TCRP Friend => no IP Tried with TCRP w/o Friend and same result. Most likely DSM 7.0 does not like something about the old hardware. A note that yesterday I have upgraded 4 servers from 6.2.3 to 7.1.1 without a hitch using TCRP Friend, except this one. Quote Link to comment Share on other sites More sharing options...
alirz1 Posted December 4, 2022 Share #4477 Posted December 4, 2022 On 12/3/2022 at 6:29 AM, alirz1 said: Ds3622, dsm 7.1 Well I was able to sort my own issue. By using sataport map of 22 and disk Id of 00. ps. Would some have any pointers for me to get hw transcoding to work under ds918,dsm 7.1 setup. Using real Mac and serial. Even have synologys advanced media codec pack installed and activated. I seem to be missing the /dev/dri directory. Quote Link to comment Share on other sites More sharing options...
xenpology Posted December 7, 2022 Share #4478 Posted December 7, 2022 (edited) Hi Guys, have an issue I got a S740 Futro with gemini lake intel celeron 4105 When i execute ./rploader.sh build geminilake-7.1.0-42661 i get: Error: Plattform not found! Any ideas? I am using newest img 0.9.3 Edited December 7, 2022 by xenpology Quote Link to comment Share on other sites More sharing options...
Kaneske Posted December 7, 2022 Share #4479 Posted December 7, 2022 Got the same Machine, but I am on ESXi patched with Realtek NIC Drivers. Makes life easier. Did you know this supports NVMe and a 2,5“ SATA Drive with adapting the Ports of WiFi Card and SATA Drive? Baremetal…don’t know. If you’d like to know more about gettin on ESXi with S740, I’ll help surely. Quote Link to comment Share on other sites More sharing options...
xenpology Posted December 7, 2022 Share #4480 Posted December 7, 2022 Hi Kaneske j heard about. But the nvme is just running on pcie x1 on the wifi port?! How does it work with ESXi? Quote Link to comment Share on other sites More sharing options...
xenpology Posted December 7, 2022 Share #4481 Posted December 7, 2022 (edited) i did it, dont know what was wrong and tried this .rploader.sh build ds920p-7.1.1-42962 Maybe there was a gap too much, i have no clue. Found the correct line with a 2422+ from peter suh and changed it to 920p and bootloader was creating Edited December 7, 2022 by xenpology Quote Link to comment Share on other sites More sharing options...
Kaneske Posted December 7, 2022 Share #4482 Posted December 7, 2022 1 hour ago, xenpology said: Hi Kaneske j heard about. But the nvme is just running on pcie x1 on the wifi port?! How does it work with ESXi? Quite good. The NVMe hosts the VMs and DataStorages for the VMs and I got an 2TB 2,5“ SSD passthrough‘ed to my XPenology VM. Runs well and gives benefits that VMWare XPEN has. Flexibility. 1 Quote Link to comment Share on other sites More sharing options...
Sersh05 Posted December 8, 2022 Share #4483 Posted December 8, 2022 hepl me..... or wrong topic? Quote Link to comment Share on other sites More sharing options...
loveburn Posted December 8, 2022 Share #4484 Posted December 8, 2022 (edited) 6 часов назад, Sersh05 сказал: hepl me..... or wrong topic? Naibnul?))) Edited December 8, 2022 by loveburn Quote Link to comment Share on other sites More sharing options...
Jizar Stoffel Posted December 9, 2022 Share #4485 Posted December 9, 2022 (edited) Hey guys, its been awhile... I have been running this build for several months now without problem. but lately my Drive 8 have been crashing non-stop. I have already Replace the drive with brand new ones many times (4 to be exact). and everytime I try to repair the Storagepool, It either crashes or say system partition failed. What else can I do? short of have to remount the whole thing, I got pretty much 10TB of data so far. would hate to loose all that! edit: the version Im running is not the same as my signature, it is DSM 7.1-42661 Edited December 9, 2022 by Jizar Stoffel Quote Link to comment Share on other sites More sharing options...
rojoone2 Posted December 9, 2022 Share #4486 Posted December 9, 2022 36 minutes ago, Jizar Stoffel said: Hey guys, its been awhile... I have been running this build for several months now without problem. but lately my Drive 8 have been crashing non-stop. I have already Replace the drive with brand new ones many times (4 to be exact). and everytime I try to repair the Storagepool, It either crashes or say system partition failed. What else can I do? short of have to remount the whole thing, I got pretty much 10TB of data so far. would hate to loose all that! edit: the version Im running is not the same as my signature, it is DSM 7.1-42661 Check all your cables. Make sure you SATA and power connectors and cables are good and have a solid connection. This has happened to me before but with only one drive and a bad connection was the blame. If you are able to secure the cables near the drive with tie straps to eliminate any movement. Quote Link to comment Share on other sites More sharing options...
Jizar Stoffel Posted December 9, 2022 Share #4487 Posted December 9, 2022 even worse now....lol Quote Link to comment Share on other sites More sharing options...
rojoone2 Posted December 9, 2022 Share #4488 Posted December 9, 2022 Replacing 4 x 4tb hard drives in a couple months is expensive to do and if they keep crashing,(especially the same port) there has to be a hardware problem. Its very unlikely that all the drives are faulty so either your mobo is faulty or the 4 port PCI SATA controller is faulty. Either way, BACKUP, BACKUP, did I say BACKUP? Does your motherboard have two PCI slots? If so have you tried swapping the controller to the other slot? Quote Link to comment Share on other sites More sharing options...
apriliars3 Posted December 11, 2022 Share #4489 Posted December 11, 2022 I am trying to add 2 NVME ssd sata virtual with VMWARE but only works one of this. Are there any issue¿? How can fix it? Quote Link to comment Share on other sites More sharing options...
pocopico Posted December 19, 2022 Author Share #4490 Posted December 19, 2022 (edited) On 12/12/2022 at 12:49 AM, apriliars3 said: I am trying to add 2 NVME ssd sata virtual with VMWARE but only works one of this. Are there any issue¿? How can fix it? You have to move the second to a new controller. To do so, click advanced and then move Virtual device mode from NVMe 0:1 to NVMe 1:0. Edited December 19, 2022 by pocopico 1 Quote Link to comment Share on other sites More sharing options...
apriliars3 Posted December 20, 2022 Share #4491 Posted December 20, 2022 @pocopico another question. I used DS3622xs+ with serial number and mac genuine and works perfectly with 4 mac, but when I try to add 5 mac can not found ip with Synology Assistant and no works. I test it on baremetal, proxmox, etc. and the same issue. Is there a limitation to the bootloader? Only works with 4 mac or less? No works Works Quote Link to comment Share on other sites More sharing options...
pocopico Posted December 20, 2022 Author Share #4492 Posted December 20, 2022 3 minutes ago, apriliars3 said: @pocopico another question. I used DS3622xs+ with serial number and mac genuine and works perfectly with 4 mac, but when I try to add 5 mac can not found ip with Synology Assistant and no works. I test it on baremetal, proxmox, etc. and the same issue. Is there a limitation to the bootloader? Only works with 4 mac or less? No works Works I'll have to look at that. BTW, you dont have to specify the 5th MAC to enable a 5th network interface ? Quote Link to comment Share on other sites More sharing options...
apriliars3 Posted December 20, 2022 Share #4493 Posted December 20, 2022 (edited) 17 minutes ago, pocopico said: I'll have to look at that. BTW, you dont have to specify the 5th MAC to enable a 5th network interface ? Yes, is possible with real mac the other nic ethernet. Only is that I have 5 mac for DS3622xs+, and if enter 4 mac works, with 5 mac no ip. I think is limit of the bootloader or something, there is curiosity because it is not possible use 5 mac or more while DS3622xs+ original by Synology use 5 mac with DSM. Edited December 20, 2022 by apriliars3 Quote Link to comment Share on other sites More sharing options...
pocopico Posted December 20, 2022 Author Share #4494 Posted December 20, 2022 13 minutes ago, apriliars3 said: Yes, is possible with real mac the other nic ethernet. Only is that I have 5 mac for DS3622xs+, and if enter 4 mac works, with 5 mac no ip. I think is limit of the bootloader or something, there is curiosity because it is not possible use 5 mac or more while DS3622xs+ original by Synology use 5 mac with DSM. You are right -> https://github.com/XPEnology-Community/redpill-lkm5/blob/568db23d3a93e03a30c8a682d6456b50fdc8dea1/config/cmdline_opts.h#L38 LKM only supports 4 MACs Quote Link to comment Share on other sites More sharing options...
Kaneske Posted December 22, 2022 Share #4495 Posted December 22, 2022 Actual Hotfix Update -3 performs as in-place update via GUI if manually uploaded .pat is provided. No Reboot, no worries for me. Both ESXi VMs were and stayed up and work like charm. Quote Link to comment Share on other sites More sharing options...
unlikely Posted December 23, 2022 Share #4496 Posted December 23, 2022 On 3/11/2022 at 10:38 AM, m0nji said: Has anyone tried the Redpill Loader on Hyper-V? Did you succeed? Any tip? Quote Link to comment Share on other sites More sharing options...
Peter Suh Posted December 26, 2022 Share #4497 Posted December 26, 2022 On 12/21/2022 at 5:57 AM, pocopico said: You are right -> https://github.com/XPEnology-Community/redpill-lkm5/blob/568db23d3a93e03a30c8a682d6456b50fdc8dea1/config/cmdline_opts.h#L38 LKM only supports 4 MACs https://github.com/XPEnology-Community/redpill-lkm/blob/0df1ec86ab5fc48749d700ee336671d4bee9e085/config/cmdline_opts.h#L38 1 Quote Link to comment Share on other sites More sharing options...
apriliars3 Posted December 27, 2022 Share #4498 Posted December 27, 2022 https://github.com/XPEnology-Community/redpill-lkm/blob/0df1ec86ab5fc48749d700ee336671d4bee9e085/config/cmdline_opts.h#L38Could you update that file to have limit 5 mac? Quote Link to comment Share on other sites More sharing options...
gericb Posted December 27, 2022 Share #4499 Posted December 27, 2022 (edited) 2 hours ago, apriliars3 said: Could you update that file to have limit 5 mac? "DSM kernel only uses 4". So it's not just a matter of the CMDLINE update or equally as simplistic modification elsewhere. So no built-in kernel support for more than 4 NICs. Edited December 27, 2022 by gericb 1 Quote Link to comment Share on other sites More sharing options...
pocopico Posted December 31, 2022 Author Share #4500 Posted December 31, 2022 On 12/27/2022 at 1:43 PM, apriliars3 said: Could you update that file to have limit 5 mac? Its will have no effect ... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.