Search the Community

Hello Everyone, Okay so the situation is this. My NAS shows up in the Synology Assistant. The drives are mapped, I can access in Windows File Explorer. It seems everything is working in the background. BUT I can no longer get into the NAS from my browser. I get this error "Sorry, the page you are looking for is not found." I spent a few hours searching the internet and this forum to see if I can fix it myself. I did not see any info. I've rebooted my router, tried other computers and browsers. I also rebooted the NAS few times. Hardware is bare metal. I am updated on the NAS to DSM 7.2.1-69057 Update 4 This problem came up when I shutdown the NAS and moved a drive from one of the sata ports. I was adding an SSD cache drive. After I rebooted, I can no longer get into the NAS from a web browser. I looked at Tiny loader on boot and it says up to date with 0.0.6 What do I do? I am awaiting your response before I do anything else. I was going to try recreating my Tiny USB boot drive but I will wait for you before I touch anything. THANKS!

merci beaucoup de ton aide. ce qu'il faut savoir avant tous, je ne connais rien a linux! je ne sais pas si ces éléments vont solutionner le soucis de la carte reseaux. Mais il m'ont donné une piste a explorer, le addons. je pensais que l'on parlait des addons genre plex, ryns, hbs, ect.... ainsi je vais essayer de mettre le .conf avec la fonction addons du loader. par contre, les pièces jointes dans les posts ont été supprimées si quelqu'un les à, je suis preneur biens sur. tous, ainsi je vais pouvoir essayer. est-ce que quelqu'un sais cela est possible aussi avec le loader de qnap??

Bonjour Après de nombreuses années sur WD Mycloud EX2, le récent problème subit par WD m'a incité à plus d'autonomie. J'ai commencé a bosser sur OMV mais je ne suis qu'un windowsien. J'ai pu faire un NAS opérationnel mais ça s'est compliqué avec l'accès à distance. Linux m'échappe et j'ai passé des semaines à explorer les pistes mais il manque toujours un bout de ficelle pour concrétiser... Cette fois j'explore Xpenology. J'ai pu avancer plus rapidement. Mon problème car il faut bien s'en créer. J'ai ma clé USB qui boot bien. Je souhaite la connecter en la bricolant pour l'intégrer à la carte mère. Méfiant, après avoir lu ce post, je tente d'en créer d'autres en prévision de manière traditionnelle avant de bricoler ma clé. Or les nouvelles clés réalisées de même manière que la première ne fonctionnent pas. A la rigueur, ça boot mais impossible d'atteindre la console depuis mon PC. Il semble que ce n'est pas le même port qui s'affiche. Comment réaliser exactement la même clé? Merci par avance

I'm glad that loader build is now possible smoothly.😀 The third partition is not easily accessible without mounting it when the loader is running normally. The 1st/2nd partition varies depending on the situation, but it is also difficult to check the contents without mounting it. If you are an expert, you can take it out with the mount, but for beginners, Considering this situation, the zlastbuild.log file does not seem to be convenient to retrieve no matter where it is placed on the 1st/2nd/3rd partition. I am also using MacOS Ventura as my default OS, but it is not easy to access the USB FAT partition for this loader. Just as Windows does not consider MacOS partition types APFS or MacOS Extended (Journaled), It seems natural that MacOS does not consider Windows FAT partitions. Since I don't use Windows much these days, I first noticed that the way FAT partitions are displayed is different even within the same Windows (11 and 10). The method previously used to make good use of this FAT partition was to run “Total Commander” with administrator privileges rather than Explorer. This tip is also useful for looking into the UEFI partition where the letters are assigned.

Fun times! Previously been using 0.9.4.3-2 no issues. I figured it was safe to reboot and rebuild the loader for the 7.2.1-69057, selected from the menu, and despite having a 16GB USB, it complained at some point, not having enough free space, went through the build, once it reboots, found a new FRIEND, but also couldn't process, complaining about free space. Of course it upgraded automatically the loader to 0.9.5, now it's back to the TCRP basic blue screen and lost my whole configuration, MAC addresses, SN, Model, etc. Looking at the USB layout, it's MBR style - 71MB (FAT), 75MB (FAT), 877MB (FAT32), 13.3GB (FREE) No doubt thanks to @Peter Suh I have found the multiple renamed/archived user_config.jsonYearMonthDay files which contains all of the relevant SN/MAC/etc. info. What's the best way to go here, just record that relevant data from the user_config, totally rebuild the USB from scratch manually encoding the data for the build... or some minor slight of hand with saving and restoring one of the user_config.json files? Curious too, I noticed on my Windows 11 Pro machine, when the USB is plugged in, none of the partitions show up in File Explorer, but on my Windows 10 Pro, no problem the 2nd (75MB) and 3rd (877MB) partitions show up just fine and accessible... I don't think this is do to the previous install of OSFMount program, but it could be. Just found it interesting. 🤔 Thanks

In case someone else runs across this topic in the future, I WAS ABLE TO GET EVERYTHING BACK. Had to use Recovery Explorer Pro to get the data back after the failed restriping. At first it seemed like it could not recover the data (but at least was able to get file names), so I reached out to their support team and they offered to have a look over TeamViewer. The guy took about 10 mins sussing out the drives, changing some recovery settings that were over my head despite working in all levels of IT Infrastructure for 25 years now, it was cool to watch him piece it back together. In the end, left it scanning overnight and I was able to fully recover everything. There were maybe 10 files that were corrupted out of over 300,000. Highly recommend these guys if someone else ends up in the same boat.

Hi, its me again with a whole new issue hahaha! My build is DSM 7.2 Peter tcrp. I was connecting to it with my PC which runs on win11. But like a week ago I decided to do a clean install of win11 and now everytime I try to connect to my server through win11 using file explorer I get the message username or password incorrect. I can login to DSM tru webportal using User/Pass, but cannot access server from win. I know its a common issue with a lot of people reporting it, I google it, but cant find a working fix for this. Any help...

@pocopico Using the WEBUI and tinycore-redpill-uefi.v0.9.4.9.img I got a bare metal build operational. (Asus P9D-I serverboard / Xeon E3-1225v2) However, Info Center- General page was completely empty (no info) and the USB-bootdrive was visible and accessible in File Explorer (as 3 devices) Reverted back to tinycore-redpill-uefi.v0.9.4.8.img, used the manual SSH procedure (including updating loader) and all issues were resolved.

Hello, J'ai trouvé un sujet ici => https://www.nas-forum.com/forum/topic/76105-suppression-danciennes-versions-de-dsmsrm-des-serveurs-de-synology/ en regardant en diagonal il y as un lien qui mènerais à un backup avec toutes les anciennes versions=> https://web.archive.org/web/20230116203045/https://archive.synology.com/download/Os/DSM Aucune idée sur la fiabilité du site, mais peux être une piste à explorer.

Hi Guys Today I had a little power outage which cause that 2 of my Raids crashed on my DSM VM. None of the disks is faulty but both Raids are showing "Read-only" but I'm able to access the files via WinScp or File-Explorer. The Raids are mapped as md2 & md3 although md3 is showing "faulty active sync" when using mdadm -D but the state is "clean". Md2 is showing "clean, degraded, recovering" and active sync on all drives and "spare rebuilding" on the last drive. So I guess md2 will repair itself within the next hours. I did some research and I found the command "mdadm --stop /dev/md3" to unmount md3, so that I can rebuild it with the 3 disks that belong to that raid. But when I do that, I always get the message, that md3 is in use: "mdadm: Cannot get exclusive access to /dev/md3:Perhaps a running process, mounted filesystem or active volume group?" Anybody an idea how to solve this problem? Is there a command to stop all processes like syno_poweroff_task for DSM7?

Greetings to all, to see if someone can help me or can know the cause: I have two machines with DSM 7.1.1 sp 5, when I want to transfer the information from one to the other, 1 TB in photos and 1 TB in music, I find that the destination machine, after a while, disappears from the network and I receive a file cannot be copied error, the destination machine is not visible in windows explorer, nor is it seen by synology assistant, but the nic has a link, but the sending machine remains accessible, I have tried with 3 intel ethernet cards and two switches, if I transfer the information in small batches I do not detect the incident, but if I copy each folder at once, that is, the entire music folder, then I encounter the problem, at different times, it is not that it happens after 15 minutes or 400 GB ... but it happens ... any ideas?

No, I'm still holding out after 4 years for someone to reply to this post. My DS412 has just died like 2 weeks ago and I can't really use a blob backup for anything until I have a new synology since the Hyper Backup Explorer for windows doesn't support browsing blob storage!

Hi folks, I have a question and hope someone can help. I set up VM DS918 within ESXi. When I try to access it under Windows Explorer/network, It would not let me. It says username or password incorrect. I know they are correct. I have no problem accessing my real Synology NAS. Any idea how I can fix it? Thanks

Setting a VM DVA3221 is fairly easy. However, I have been unable to access the device from Windows 10 explorer/network. It always tells the username and/or password are incorrect. Does anyone else have this issue?

Just in case, I will briefly describe the problem. ARPL and TCRP Friend: Virtual machines through VMM are very slow (long installation, long startup, very slow overall). CPU load 1-2% TCRP: No problem, virtual machines are working fine. CPU load 10-12% Described in more detail here: https://github.com/fbelavenuto/arpl/issues/260 https://github.com/pocopico/tinycore-redpill/issues/208 Test results (DVA3221): TCRP (0.9.3 classic mode): a) 2\4(cpu\memory): https://browser.geekbench.com/v5/cpu/19811712 6\8(cpu\memory): https://browser.geekbench.com/v5/cpu/19813994 b) Loredan@NAS:~$ sudo su Password: ash-4.4# grep flags /proc/cpuinfo | grep -m1 hwp flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx pdpe1gb rdtscp lm constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 sdbg fma cx16 xtpr pdcm pcid sse4_1 sse4_2 x2apic movbe popcnt tsc_deadline_timer aes xsave avx f16c rdrand lahf_lm abm 3dnowprefetch epb invpcid_single intel_pt ssbd ibrs ibpb stibp ibrs_enhanced tpr_shadow vnmi flexpriority ept vpid fsgsbase tsc_adjust bmi1 avx2 smep bmi2 erms invpcid mpx avx512f rdseed adx smap clflushopt avx512cd sha_ni xsaveopt xsavec xgetbv1 dtherm ida arat pln pts hwp hwp_notify hwp_act_window hwp_epp hwp_pkg_req pku md_clear flush_l1d arch_capabilities ash-4.4# ARPL (v1.0-beta10) a) Before "modprobe acpi-cpufreq && echo "performance" | tee /sys/devices/system/cpu/cpu*/cpufreq/scaling_governor" 2\4(cpu\memory): https://browser.geekbench.com/v5/cpu/19813055 6\8(cpu\memory): https://browser.geekbench.com/v5/cpu/19813550 After "modprobe acpi-cpufreq && echo "performance" | tee /sys/devices/system/cpu/cpu*/cpufreq/scaling_governor" 2\4(cpu\memory): https://browser.geekbench.com/v5/cpu/19813250 6\8(cpu\memory): https://browser.geekbench.com/v5/cpu/19813746 b) Loredan@NAS_test:/$ sudo su Password: ash-4.4# grep flags /proc/cpuinfo | grep -m1 hwp flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx pdpe1gb rdtscp lm constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 sdbg fma cx16 xtpr pdcm pcid sse4_1 sse4_2 x2apic movbe popcnt tsc_deadline_timer aes xsave avx f16c rdrand lahf_lm abm 3dnowprefetch epb invpcid_single intel_pt ssbd ibrs ibpb stibp ibrs_enhanced tpr_shadow vnmi flexpriority ept vpid fsgsbase tsc_adjust bmi1 avx2 smep bmi2 erms invpcid mpx avx512f rdseed adx smap clflushopt avx512cd sha_ni xsaveopt xsavec xgetbv1 dtherm ida arat pln pts hwp hwp_notify hwp_act_window hwp_epp hwp_pkg_req pku md_clear flush_l1d arch_capabilities ash-4.4# modprobe acpi-cpufreq && echo "performance" | tee /sys/devices/system/cpu/cpu*/cpufreq/scaling_governor performance ash-4.4# grep flags /proc/cpuinfo | grep -m1 hwp flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx pdpe1gb rdtscp lm constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 sdbg fma cx16 xtpr pdcm pcid sse4_1 sse4_2 x2apic movbe popcnt tsc_deadline_timer aes xsave avx f16c rdrand lahf_lm abm 3dnowprefetch epb invpcid_single intel_pt ssbd ibrs ibpb stibp ibrs_enhanced tpr_shadow vnmi flexpriority ept vpid fsgsbase tsc_adjust bmi1 avx2 smep bmi2 erms invpcid mpx avx512f rdseed adx smap clflushopt avx512cd sha_ni xsaveopt xsavec xgetbv1 dtherm ida arat pln pts hwp hwp_notify hwp_act_window hwp_epp hwp_pkg_req pku md_clear flush_l1d arch_capabilities ash-4.4# grep . /sys/devices/system/cpu/cpu0/cpufreq/* /sys/devices/system/cpu/cpu0/cpufreq/affected_cpus:0 /sys/devices/system/cpu/cpu0/cpufreq/bios_limit:2601000 /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_cur_freq:2601000 /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_max_freq:2601000 /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_min_freq:800000 /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_transition_latency:10000 /sys/devices/system/cpu/cpu0/cpufreq/freqdomain_cpus:0 1 2 3 4 5 6 7 8 9 10 11 /sys/devices/system/cpu/cpu0/cpufreq/related_cpus:0 /sys/devices/system/cpu/cpu0/cpufreq/scaling_available_frequencies:2601000 2600000 2500000 2300000 2200000 2100000 2000000 1800000 1700000 1600000 1400000 1300000 1200000 1100000 900000 800000 /sys/devices/system/cpu/cpu0/cpufreq/scaling_available_governors:powersave performance userspace /sys/devices/system/cpu/cpu0/cpufreq/scaling_cur_freq:28171840 /sys/devices/system/cpu/cpu0/cpufreq/scaling_driver:acpi-cpufreq /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor:performance /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq:2601000 /sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq:800000 /sys/devices/system/cpu/cpu0/cpufreq/scaling_setspeed:<unsupported> grep: /sys/devices/system/cpu/cpu0/cpufreq/stats: Is a directory ash-4.4# TCRP Friend (0.9.3): a) After "modprobe acpi-cpufreq && echo "performance" | tee /sys/devices/system/cpu/cpu*/cpufreq/scaling_governor" 2\4(cpu\memory): https://browser.geekbench.com/v5/cpu/19812586 b) Loredan@NAS_test:/$ sudo su Password: ash-4.4# grep flags /proc/cpuinfo | grep -m1 hwp flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx pdpe1gb rdtscp lm constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 sdbg fma cx16 xtpr pdcm pcid sse4_1 sse4_2 x2apic movbe popcnt tsc_deadline_timer aes xsave avx f16c rdrand lahf_lm abm 3dnowprefetch epb invpcid_single intel_pt ssbd ibrs ibpb stibp ibrs_enhanced tpr_shadow vnmi flexpriority ept vpid fsgsbase tsc_adjust bmi1 avx2 smep bmi2 erms invpcid mpx avx512f rdseed adx smap clflushopt avx512cd sha_ni xsaveopt xsavec xgetbv1 dtherm ida arat pln pts hwp hwp_notify hwp_act_window hwp_epp hwp_pkg_req pku md_clear flush_l1d arch_capabilities ash-4.4# modprobe acpi-cpufreq && echo "performance" | tee /sys/devices/system/cpu/cpu*/cpufreq/scaling_governor performance ash-4.4# grep flags /proc/cpuinfo | grep -m1 hwp flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx pdpe1gb rdtscp lm constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 sdbg fma cx16 xtpr pdcm pcid sse4_1 sse4_2 x2apic movbe popcnt tsc_deadline_timer aes xsave avx f16c rdrand lahf_lm abm 3dnowprefetch epb invpcid_single intel_pt ssbd ibrs ibpb stibp ibrs_enhanced tpr_shadow vnmi flexpriority ept vpid fsgsbase tsc_adjust bmi1 avx2 smep bmi2 erms invpcid mpx avx512f rdseed adx smap clflushopt avx512cd sha_ni xsaveopt xsavec xgetbv1 dtherm ida arat pln pts hwp hwp_notify hwp_act_window hwp_epp hwp_pkg_req pku md_clear flush_l1d arch_capabilities ash-4.4# grep . /sys/devices/system/cpu/cpu0/cpufreq/* /sys/devices/system/cpu/cpu0/cpufreq/affected_cpus:0 /sys/devices/system/cpu/cpu0/cpufreq/bios_limit:2601000 /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_cur_freq:2601000 /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_max_freq:2601000 /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_min_freq:800000 /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_transition_latency:10000 /sys/devices/system/cpu/cpu0/cpufreq/freqdomain_cpus:0 1 2 3 4 5 6 7 8 9 10 11 /sys/devices/system/cpu/cpu0/cpufreq/related_cpus:0 /sys/devices/system/cpu/cpu0/cpufreq/scaling_available_frequencies:2601000 2600000 2500000 2300000 2200000 2100000 2000000 1800000 1700000 1600000 1400000 1300000 1200000 1100000 900000 800000 /sys/devices/system/cpu/cpu0/cpufreq/scaling_available_governors:powersave performance userspace /sys/devices/system/cpu/cpu0/cpufreq/scaling_cur_freq:28018838 /sys/devices/system/cpu/cpu0/cpufreq/scaling_driver:acpi-cpufreq /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor:performance /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq:2601000 /sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq:800000 /sys/devices/system/cpu/cpu0/cpufreq/scaling_setspeed:<unsupported> grep: /sys/devices/system/cpu/cpu0/cpufreq/stats: Is a directory ash-4.4# The difference is not big, but upon use it is significant and visible without any measurements. The explorer window opens for 30-60 seconds. The problem is probably something else, I'm confused by reading from the HDD, look in the issues, I've attached screenshots. p.s. Sorry in advance, I can not actively and quickly conduct tests to test, this is a working machine, and I am not a very experienced user.

Hello, I report that the beta version does not work with my hardware, instead the alpha version v0.5-alpha1 does work correctly (removing some errors that I had previously reported) the version i try rs4021xs+ If you need to carry out any additional tests, tell me fbelavenuto, thank you very much for the work .I proceed in the same way, I format a new USB, I install the image, I carry out the configuration process, everything seems correct, I restart to be able to install the dsm, on the screen everything appears correct, (search ip etc, booting etc) but the windows explorer gives it the ip, but it does nothing, i search with an ip scanner program, but that ip that the loader gives me is not there, as if it did not give the ip or that the drivers of the network cards did not they were fine...

Hi, ich habe ein großes Problem . Die xpenology 3615xs ist in Windows Explorer unter Computer nur kurz erschienen, und nach einiger Zeit sieht mann sie nicht mehr. Jedoch wenn ich den // "Name der xpenology " eingeben komme ich drauf . Also hat sie eine gültige IP . In der Box ist die Windows Erkennung abgehackt, SMB hab ich nicht verändert . ( Bin auf einer Lanparty und Jeden zu erklären ,er muss mit dem Namen in die Box ist mühsam). Einige machen es bereits so , jedoch kommt bei manchem die Aufforderung sie müssen Benutzer und password eingeben, bei anderen jedoch nicht . Bin für jeden Tipp froh.

I have a basic volume on a VM running 918 image. it was a 10TB disk and were filled with 8TB, and after deleting files and the volume size still 8TB, and using file explorer to check the file size should be around 4TB. No recyclebin, no versioning. Any hint? Thanks.

Je vais double-checker mes disques, mais cela semble bon. Par contre, le point du BIOS est bon à voir, j'ai déjà eu des problèmes dans le passé avec lui (HP qui bloquait au boot), donc à vérifier, oui ! Je vais explorer ça. Merci de ce retour en tous cas !

I have a kind of related question for everybody.... I have a proxmox redpill DS3622 build. Running paravirtual NIC in Proxmox with V9F ext drivers. I also have a PCI passthru Ethernet port, I used one of the intel ports onboard from the server motherboard. Both work fine, the Intel NIC in pci pass thru didn't require any additional ext drivers to work. Each has its own different IP, they are not bonded, so I know which port I am using. I am getting different smb speeds when copying over the network in Windows. Scenario 1: In windows, open network, open icon for DS3622, open temp shared folder, now drag and drop 1.1gb file.. I get a maximum transfer of 60mb/sec (\\ds3622\temp) Scenario 2: Change location in windows explorer to direct ip (\\192.168.1.100\temp) I get 110mb/sec. The proxmox virtual nic is ip 100, and the pci passthru is ip 101 (\\192.168.1.101\temp), same speeds on either direct ip. So if the window shows a direct ip in the location, the speed is nearly doubled. If it show ds3622 its about half speed...? any clue? This is a repeatable experiment. I get similar results from different pcs on the lan, different files, and the results almost always the same, give or take a few mbs/sec

"si vous utilisez Tinycore RedPill Loader en version 0.8.0.5" Sur le site github, je ne trouve qu'une V0.8.0.0, je veux bien le lien de la v0.8.0.5 svp. "Il faut parfois comprendre ce qu'on fait et dépasser les tutos qui mâchent un peu trop le travail." Merci pour ce conseil très utile, malheureusement je n'ai plus le luxe du temps (situation familiale oblige) de pouvoir explorer tous les sujets que je souhaiterai.

Bonjour à tous, Merci pour le tuto ! De mon côté, j'ai un souci avec les disques... J'arrive à charger le fichier .pat. Mais au 1er boot, au lieu d'arriver sur le DSM, j'arrive sur un écran m'affichant une erreur au niveau disque; le statut du Diskstation est "Récupérable". Quelqu'un a été confronté au même souci ? Une piste à explorer ? Merci.

Je t'avoue ne pas être des plus accoutumé à ce sujet, toutefois, as-tu épluché la doc Syno ? J'y ai jeté un petit coup d'oeil, peut-être une piste à explorer... Après, niveau config sur Xpenology, une manip à réaliser m'étonnerait dans le cadre d'un cache ssd ! Sauf pour le cache nvme qui demande un mappage particulier. Je te joins la doc Création d'un cache ssd: https://kb.synology.com/fr-fr/DSM/help/DSM/StorageManager/ssd_cache_create?version=7 Considérations importantes lors de la création d'un cache ssd : (parle des prérequis notamment) https://kb.synology.com/fr-fr/DSM/tutorial/What_are_Some_Considerations_for_Creating_SSD_Cache

Did you try ./rploader.sh restoreloader now command? what exactly are you trying to restore? rebuilding usb loader is fairly easy which you already know. Keep same serial and mac and version and on reboot system will come back as normal. /home/tc/old you will see your user_config.json (if you did backup command) which should have serial and mac you can move with mv command or copy with cp command, obviously with from/to syntax Or if nothing else use winscp on windows or portx on mac then you get explorer gui and can move and copy with drag and drop

Hyper Backup - программа для создания резервных копий с NAS на другой диск, другой NAS или облако. Hyper Backup Vault помогает управлять резервными копиями сделаными с другого сервера на тот где установлен Hyper Backup Vault. Например найти и востановить файл или папку, если оригинальный сервер не доступен. Данные хранятся в собственном формате и напрямую не доступны. Есть версия для просмотра и востановления для рабочей станции - Hyper Backup Explorer для тех же целей. Для резервирования на данный NAS других компов и серверов по сети. Полезно для автоматического принудительного сбора на офисный NAS копий с остальных серверов и раб. станций. Требует регистрации, но есть лечение. У всех разные запросы и решения. Для клиентов, я чаще всего собираю на NAS бэкапы с серверов и раб. станций с помощью других приложений таких как Veeam или Acronis и т.п. Сам NAS резервирую на USB диски. Обычно два, которые клиент меняет еженедельно и уносит один домой или в сейф. Зачастую, дополнительно, периодически делается синхронизация на другой NAS, находящийся в другом месте. Зависит от того, насколько клиент обеспокоен сохранностью данных и возможностью быстрого востановления. Для дома, бэкаплю Acronis полный образ диска на NAS, там же на NAS находятся все рабочие файлы и пр., а NAS ежедневно синхронизируется на USB диск. Его я тоже периодически меняю на второй, в сейфе. Добавочно, еженедельно полная синхронизация на второй NAS, который остальное время в основном спит. Большой опыт развивает здоровую паранойю.😃