jcgechevarria

Greetings to all, to see if someone can help me or can know the cause: I have two machines with DSM 7.1.1 sp 5, when I want to transfer the information from one to the other, 1 TB in photos and 1 TB in music, I find that the destination machine, after a while, disappears from the network and I receive a file cannot be copied error, the destination machine is not visible in windows explorer, nor is it seen by synology assistant, but the nic has a link, but the sending machine remains accessible, I have tried with 3 intel ethernet cards and two switches, if I transfer the information in small batches I do not detect the incident, but if I copy each folder at once, that is, the entire music folder, then I encounter the problem, at different times, it is not that it happens after 15 minutes or 400 GB ... but it happens ... any ideas?

Hello, I am having similar problems but with ARPL, on some motherboards, some with intel nics, others with realtek nics, after the loader loads DSM, when the command line returns, the NIC does a kind of reboot, and depending on which Synology model you have chosen, the NIC does not have a link again, On a Gigabyte B150 motherboard with intel core i5 6400, intel nic, it does not link if I use DS3615xs but it does link if I use DS3622xs+... Instead on a Gigabyte H610 motherboard with 12-gen intel core i5... with Realtek nic, after loading DSM and resetting the NIC, it no longer has a link with any Synology model... I hope I have explained myself well... ..

I have the same problem, with a Gigabyte B150M-D3H DDR3, if I create the bootloader for a DS3615XS, when loading DSM, it seems to do a NIC reset, but the NIC doesn't link again, so Synology Assistant doesn't work. it finds it, on the other hand if I use the DS 3622xs+ model it also resets the NIC, but it does link and I can find it with the asistant, the fact is that I have created the bootloader flash drive 10 times and none of them have worked well for me with the DS3615xs...and it has always worked with the DS3622xs+, the NIC on this board is an Intel...

First, thanks for quick answer, i'm using pocopico's 0.8 loader....updated to 0.8.5....during loader build...

Greetings to all and thanks to the developers for all their work, I am testing TCRP, with DS920+, on a Gigabyte motherboard, H97, with Intel Core i5 4570, using 4 hard drives, but I have not connected all at the same time, I configured the loadeer with only two drives to start with, then I added a third drive, and the system saw it with no problem, then I added a fourth drive and the system saw it with no problem too, and I was able to create a RAID 5 with all four drives, the thing is According to the information in the post, DS920+, "any disk ports left unpopulated at loader build time will not be accessible later." But in my case they have been seen and are accessible and usable. Another mystery?? On the other hand, as I said, I use an Intel Core i5, but in the DSM system characteristics, it indicates a Core i3... am I losing processor power or some feature? Thank you very much for the answers. A greeting and once again thank you for your enormous work.

I has that issue too, on three Gigabyte motherboards, H87 and H97 chipsets, solved changing "time setting" to manual on DSM Regional settings.

This is not an error, it's the bootloader ...now you have to type http://find.synology.com on a web browser on a PC at the same network ....

Sorry, but internal SSD disks, has not PID and VID... and... i tried this procedure and work's fine on a WD green ssd sata M2 drive