Jump to content
XPEnology Community

jurgenautt

Member
  • Posts

    56
  • Joined

  • Last visited

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

jurgenautt's Achievements

Regular Member

Regular Member (3/7)

0

Reputation

  1. Hello, good afternoon, I have a problem with a synology ds1817+ From one day to the next without doing anything, some original applications (active backup and quickconnect access) stopped working I was surprised and everything seemed fine, until I realized that the original serial had disappeared... The 4 network cards work fine, everything ok except the damn serial missing I contacted synology and they said it was out of support (no comment) Is there a way to re-enter the serial into synology? or any way to solve this problem? Thank you very much for the help
  2. hi my mother board supermicro x10sdv-tp8f Dual LAN with 10G SFP+ from D-1500 SoC Quad LAN with 1GbE with Intel® I350-AM4 Dual LAN with 1GbE with Intel® I210 Single LAN with 1 Realtek RTL8211E PHY (dedicated IPMI)
  3. Hello, I report that the beta version does not work with my hardware, instead the alpha version v0.5-alpha1 does work correctly (removing some errors that I had previously reported) the version i try rs4021xs+ If you need to carry out any additional tests, tell me fbelavenuto, thank you very much for the work .I proceed in the same way, I format a new USB, I install the image, I carry out the configuration process, everything seems correct, I restart to be able to install the dsm, on the screen everything appears correct, (search ip etc, booting etc) but the windows explorer gives it the ip, but it does nothing, i search with an ip scanner program, but that ip that the loader gives me is not there, as if it did not give the ip or that the drivers of the network cards did not they were fine...
  4. first of all apologize if my english is not very good, I have mounted the dsm 7.1 on an intel hardware: supermicro x10sdv-tp8f motherboard (intel xeon d-1518, 8cores,6 LAN 1GB, 2 LAN 10GB) 16ram ddr ecc, hba lsi 3008 controller 2u box from the manufacturer chembro sas/sata with 14 disks, 2 power supplies I installed the installation version of (velabenuto) v0.5-alfa1, I followed all the configuration steps and selected the version for RS4021xs+, which is the most similar hardware I have for that version It has really been installed without any let's say serious problem detects disks (but not in correct order), says one power supply fails (both power supplies work fine) I attach screenshots and photos I would like to be able to organize the hard drives correctly the hba controller has all the front drives connected to it, and the rear small drive is connected to the sata controller on the motherboard ,thanks😁
  5. hello, ok sorry if this is not the place where I had to ask about the doubts I had about my installation, yes network cards 6 and 8 are 10gb that are not connected yet, when I have more time I will start it up. thanks
  6. first of all apologize if my english is not very good, I have mounted the dsm 7.1 on an intel hardware: supermicro x10sdv-tp8f motherboard (intel xeon d-1518, 8cores,6 LAN 1GB, 2 LAN 10GB) 16ram ddr ecc, hba lsi 3008 controller 2u box from the manufacturer chembro sas/sata with 14 disks, 2 power supplies I installed the installation version of (velabenuto) v0.5-alfa1, I followed all the configuration steps and selected the version for RS4021xs+, which is the most similar hardware I have for that version It has really been installed without any let's say serious problem detects disks (but not in correct order), says one power supply fails (both power supplies work fine) I attach screenshots and photos I would like to be able to organize the hard drives correctly the hba controller has all the front drives connected to it, and the rear small drive is connected to the sata controller on the motherboard ,thanks😁
  7. hi i have tried with a pciex intel network card And the same thing happens, when I select an option and press enter in the xpenology boot menu, it crashes and does not load the xpenology. The error is when you are going to load from the usb disk It is very strange because there are synology devices with this processor, and I have been looking at the internal network cards of the motherboard and they are Marvell 88E1543 (4L) and they are also compatible Attached screenshot of the bios.
  8. It has a usb 2.0 option and it does the same, I have also tried a pciex card with usb 2.0 and the same thing happens, could it be that the board was incompatible?
  9. Hello, I have mounted on different usb disks, charger version of both 918+ with version 1.04, and 3617 with version 1.03 and when I enter usb devices in the screen menu, both the keyboard and the usb disk are blocked and that is why xpenology does not start, I have tried to rule out usb hardware failure, a usb disk with windows installation and another with linux, and they both boot perfectly, therefore I discard the failure of the usb connectors on the motherboard . It's a startup thing, what could I do?
  10. Hello, thank you very much for answering. I have been looking at the link that indicates the extension of the drivers, but I get lost, is it possible to install version 3617 ?, in this cpu because I am the one I want. Sorry if I ask these questions but I do not understand very well the steps you indicate in the link, I do not master the Linux topic very much. What are the steps one after another that I should follow? like I'm a fool very grateful for your help
  11. hello, good afternoon, yesterday I was all day and today Sunday also trying to install xpenology on this miniitx board it is a denverton atom cpu, 4cpu i have installed 8ram DDR4 ECC, it has 4 1gb cards, a bmc network card, and 9sata looking at the cpu requirements, i downloaded version 918+ jun loader 1.04b, i did all the steps, added the network cards with your mac, etc. I generated the usb and put it on the computer, well, it did not detect a network card in any way with the synology assistant. today already thinking that maybe with a 3617 charger, it could work, I carry out the same process and nothing the same problem I have been looking at the network cards and on the asrock rack website, this model says that it has 4 Marvell 88E1543 (4L) cards, and from what I know it is compatible with xpenology, but entering service mode I see something that does not block attached capture, appear intel cards? Do I have to do anything special? Thanks
  12. hola, buenas tardes, ayer estuve todo el día y hoy domingo también intentando instalar xpenology en esta placa miniitx es una cpu denverton atom ,4cpu le he instalado 8ram DDR4 ECC, ,dispone de 4 tarjetas 1gb,una tarjeta de red bmc , y 9sata mirando los requerimientos de cpu, bajé la versión 918+ jun loader 1.04b, realicé todos los pasos, añadí las tarjetas de red con su mac, etc generé el usb y lo puse en el equipo, pues bien , no detectaba tarjeta de red de ninguna manera con el synology assistant. hoy ya pensando en que a lo mejor con un cargador 3617, podría funcionar ,realizo el mismo proceso y nada el mismo problema he estado mirando las tarjetas de red y en la web de asrock rack, este modelo dice que tiene 4 tarjetas Marvell 88E1543(4L), y por lo que sé es compatible con xpenology, pero entrando en el modo de servicio veo algo que no me cuadra adjunto captura, aparecen tarjetas intel? Seguro que estoy metiendo la pata en algún sitio , pero no sé dónde gracias por la ayuda
  13. gracias por contestar, probaré lo que indicas ,muchas gracias
  14. hola ,gracias por contestar he realizado lo que indica en este vídeo si sigues los comentarios casi al final, la gente con las últimas versiones y las últimas modificaciones ya indican que da error y que no funciona por ssh https://youtu.be/gKoHG-7w5q0 yo lo que quiero es acceder vía ssh con winscp para poder intentar cambiar las opciones de usb,esata ,sata, para poder organizar correctamente los discos etc pero parece ser que si realizo esas modificaciones que indican en los comentarios de los usuarios al final ya no puedo acceder te puedo dejar el enlace que puse en la parte del foro en inglés donde hay algunas capturas muchas gracias por la ayuda
×
×
  • Create New...