CassTG Posted January 22, 2022 Share #476 Posted January 22, 2022 (edited) No issues with LE here, Edited January 22, 2022 by CassTG Quote Link to comment Share on other sites More sharing options...
haydibe Posted January 22, 2022 Share #477 Posted January 22, 2022 (edited) Seems your browser is not able to validate the chain of trust. Though, it's a client problem, not a server problem. The build-in LE client in DSM7 should create valid certifcates using the recent issuers. Not sure if this applies to DSM6.2.x as well. Another explanaition is you access you Box, by ip or hostname that doesn't match any of the "Subject Alternative Names". As you surely already know the request URL must match one of the domains in the list of SANs of the certificate. If the above is not the problem, then an outdated browser or ca-certifactes bundle on the client machine might be the issue. With linux command line clients an outdated openssl version (<1.1.0) can cause the issues. Edited January 22, 2022 by haydibe Quote Link to comment Share on other sites More sharing options...
scoobdriver Posted January 22, 2022 Share #478 Posted January 22, 2022 HI Guys , great work . When I build with @haydibe proxmox method DS918+ 7.0.1 I get the following message during boot (Failed and Depend) . Is this normal ? I don't seem to get it when using Esxi ? DSM comes up and I am able to log in . Quote Link to comment Share on other sites More sharing options...
nemesis122 Posted January 22, 2022 Share #479 Posted January 22, 2022 I have tested all versions but my gen 8 with intel 10GBE X520 is not found on the network. could you help me that i can add the driver pls? Is with this tinycore Loader the issue solved that the gen 8 randomly rebootet? thank you Quote Link to comment Share on other sites More sharing options...
Smartpol Posted January 22, 2022 Share #480 Posted January 22, 2022 Thanks all great masters, that make this easy way to run modern xpenology possible! I successfully run bromolow-7.0.1-42218 on Proxmox 7.1, but have one trouble with dsm vm shutdown. Before I build loader in tinycore I add extention with command "sudo ./rploader.sh ext bromolow-7.0.1-42218 add https://github.com/jum key/redpill-load/raw/develop/redpill-acpid/rpext-index.json". Everything run fine, but I can't shutdown dsm vm in Proxmox, always get timeout error. Then I was at 6.2.4 with redpill loader and powerbutton 6.2.0002 spk installed shutdown in Proxmox was working. Where should I search to see what's wrong and fix it, if it's possible? Googling this with no luck: powerbutton spk for DSM 7 is absent Quote Link to comment Share on other sites More sharing options...
haydibe Posted January 22, 2022 Share #481 Posted January 22, 2022 (edited) 2 hours ago, scoobdriver said: HI Guys , great work . When I build with @haydibe proxmox method DS918+ 7.0.1 I get the following message during boot (Failed and Depend) . Is this normal ? I don't seem to get it when using Esxi ? DSM comes up and I am able to log in . Had this entries in the logs with Proxmox 7.1.x since day one with apollolake dsm7.x. Regardless if rp-helper or rploader was used. Are you sure those log entries do not exist on EXSi? Edited January 22, 2022 by haydibe fix typo Quote Link to comment Share on other sites More sharing options...
CassTG Posted January 22, 2022 Share #482 Posted January 22, 2022 (edited) After sussing the full process out this week, and many thanks of course to the OP and contributors, i decided to do a Video of the whole process today for those unsure on how to get this running on Proxmox. Mine is not a complex setup at all so YMMV however the video shows all the steps, which i do slightly differently i think by not using the vmdk image and converting it but using the normal image to boot from. However i have repeated the process many times and it's success each time!. I have not made the video public out of respect to the OP, however any one wanting the link, just message me and i will send. Thanks again, this is absolute top work! Edited January 22, 2022 by CassTG 1 Quote Link to comment Share on other sites More sharing options...
CSOL Posted January 22, 2022 Share #483 Posted January 22, 2022 Just upgraded my 6.2.3 to 7.0.1. Great work, whoever made this possible, thank you! Quote Link to comment Share on other sites More sharing options...
scoobdriver Posted January 22, 2022 Share #484 Posted January 22, 2022 (edited) 2 hours ago, haydibe said: Had this entries in the logs with Proxmox 7.1.x since day one with apollolake dsm7.x. Regardless if rp-helper or rploader was used. Are you sure those log entries do not exist on EXSi? @haydibe yes apologies your correct . I was looking at the output of dmesg for the ESXi build, when I look at the serial output I see the same messages . (Is this written to any of the logs in /var/log/ ? ) So both appear to be working ok , I am having difficulty with Face recognise in Photos, Iv'e tried the suggestions I have read, to passthrough the GPU as 0000:00:02.0 , that does not seem to work (unless real serial is still needed) , i915 hw transcode is working for Video's, Plex , conversion in Photos etc. so the quicksync aspects are working correctly . (I'm using mediated passthrough of the integrated GPU which is a coffeelake UHD 630 . ) Iv'e seen there Is a patch to make face recognition work on the DS918+ using just the cpu , however Iv'e been unable to get that to work also , (again not sure if real serial is needed ) . That's the only thing that's stopping me running this as a parallel daily driver. Appeciate All you guys effort, Iv'e been experimenting , and trialing since your docker redpill, and can't thank you guys enough . I've also got a Gen 8 Microserver with LSI HBA card which I may try some builds on also (Doesn't support HW encoding) and I know another member had some issues kernel panics , so it's still running Juns at the moment , and I need to schedule some down time, in case I need to rollback Edit : Oh I can't seem to get Esxi to passthrough the gpu as 0000:00:02.0 , it just seems to revert back when I change pciPassthru0.pciSlotNumber = "2" . With Proxmox I can but only under machine type i440 not q35 for some reason. Edited January 22, 2022 by scoobdriver Quote Link to comment Share on other sites More sharing options...
Kaneske Posted January 22, 2022 Share #485 Posted January 22, 2022 @haydibe interesting, because I noticed mine sends messages, that Protocolls are above set threshold and gives me a warning. In System Log (GUI) is nothing to read about it. Quote Link to comment Share on other sites More sharing options...
haydibe Posted January 22, 2022 Share #486 Posted January 22, 2022 1 hour ago, Kaneske said: @haydibe interesting, because I noticed mine sends messages, that Protocolls are above set threshold and gives me a warning. In System Log (GUI) is nothing to read about it. I should have been more precise: in the serial boot log or what you see in dmesg. I have no idea what the Syno Systems Logs show, I don't look at them at all. Though, I wouldn't be surprised if Syno filtered out (as in dumbed down) the output to not confuse its users. Quote Link to comment Share on other sites More sharing options...
Dvalin21 Posted January 23, 2022 Share #487 Posted January 23, 2022 19 hours ago, Dvalin21 said: Hey I noticed while trying to build DS3617xs, it fails do to a checksum mismatch when downloading the pat file. @pocopico Quote Link to comment Share on other sites More sharing options...
synoxpe Posted January 23, 2022 Share #488 Posted January 23, 2022 (edited) I've seen this happening to a few users but wasn't able to zero in on a fix. Any tips? I've just one HDD connected to the SATA port of my Intel NUC 10iFNH motherboard. Following installation details: tc@box:~$ cat user_config.json { "extra_cmdline": { "pid": "0x5581", "vid": "0x0781", "sn": "1230LWN027216", "mac1": "001132BFE351", "SataPortMap": "3", "DiskIdxMap": "00" }, "synoinfo": { "internalportcfg" : "0xffff", "maxdisks" : "16" }, "ramdisk_copy": { } } tc@box:~$ lsscsi -Hv [0] ahci dir: /sys/class/scsi_host//host0 device dir: /sys/devices/pci0000:00/0000:00:17.0/ata1/host0 [1] ahci dir: /sys/class/scsi_host//host1 device dir: /sys/devices/pci0000:00/0000:00:17.0/ata2/host1 [2] ahci dir: /sys/class/scsi_host//host2 device dir: /sys/devices/pci0000:00/0000:00:17.0/ata3/host2 [3] usb-storage dir: /sys/class/scsi_host//host3 device dir: /sys/devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.0/host3 Telnet output from the Diskstation: DiskStation> fdisk -l Disk /dev/sdc: 149 GB, 160041885696 bytes, 312581808 sectors 19457 cylinders, 255 heads, 63 sectors/track Units: sectors of 1 * 512 = 512 bytes Device Boot StartCHS EndCHS StartLBA EndLBA Sectors Size Id Type /dev/sdc1 * 0,1,1 1023,254,63 63 48676949 48676887 23.2G 7 HPFS/NTFS /dev/sdc3 1023,0,2 1023,254,63 48676951 312576704 263899754 125G 7 HPFS/NTFS Disk /dev/sdu: 29 GB, 30752000000 bytes, 60062500 sectors 29327 cylinders, 64 heads, 32 sectors/track Units: sectors of 1 * 512 = 512 bytes Device Boot StartCHS EndCHS StartLBA EndLBA Sectors Size Id Type /dev/sdu1 * 0,32,33 6,62,56 2048 100351 98304 48.0M 83 Linux /dev/sdu2 6,62,57 15,205,62 100352 253951 153600 75.0M 83 Linux /dev/sdu3 15,205,63 130,138,8 253952 2097151 1843200 900M 83 Linux Edited January 23, 2022 by synoxpe formatting Quote Link to comment Share on other sites More sharing options...
PincoPalla Posted January 23, 2022 Share #489 Posted January 23, 2022 Hello everyone, today finally after some failed attempts (because I was wrong with the procedure) I was able to install a new diskstation 918+ vers. DSM 7.0.1 in vm mode on virtualbox to test it (I need to install it in baremetal mode on a special server) with an image downloaded from the network, unfortunately I am not able to build it myself and everything is ok, it seems to work correctly and I will test it for a few days with installation tests of the applications I need. I needed to know something for those who have already done it or are aware of it and it is this; having the need to install DSM 7.0.1 on a special machine in baremetal mode where a DSM 6.2.3 up3 version already runs, must a new installation be made or can you do a migration? The migration obviously (as long as everything goes well) is much faster and less expensive in terms of time, obviously for safety I would back up the whole machine but if it were possible to do the migration it would be much better. Does anyone know if it is possible and possibly how ??? Thank you 1 Quote Link to comment Share on other sites More sharing options...
nemesis122 Posted January 23, 2022 Share #490 Posted January 23, 2022 (edited) Hi all Is there Something special with this loader when you have Intel 10Gb 520 Networkcard ? Because i have tested all Model with this loader but i cant found my Gen8 with this network card in the network? With the 1.02 or 1.03b loader all is working without drivberpacks etc. thank you very much Edited January 23, 2022 by nemesis122 Quote Link to comment Share on other sites More sharing options...
haydibe Posted January 23, 2022 Share #491 Posted January 23, 2022 (edited) 5 hours ago, synoxpe said: I've seen this happening to a few users but wasn't able to zero in on a fix. Any tips? After seeing the output of lsscsi, I would have used the same user_config. From what I remember NUC's have a single sata connector. I have no idea why the other ports are detected but not functional. As you won't be able to use those ports anyway, I would consider this a cosmetic issue. Though, you probably want to add "sata_remap": "0>2:2>0" as additional entry in "extra_cmdline", to remap your only drive to be detected as drive1 instead of drive3. Edited January 23, 2022 by haydibe Quote Link to comment Share on other sites More sharing options...
synoxpe Posted January 23, 2022 Share #492 Posted January 23, 2022 45 minutes ago, haydibe said: "sata_remap": "0>2:2>0" Thanks for trying to help out. So the user_config now looks like: { "extra_cmdline": { "pid": "0x5581", "vid": "0x0781", "sn": "1330LWN008584", "mac1": "001132450C15", "sata_remap": "0>2:2>0", "SataPortMap": "3", "DiskIdxMap": "00" }, "synoinfo": { "internalportcfg" : "0xffff", "maxdisks" : "16" }, "ramdisk_copy": { } } This addition however reduces the GRUB menu to only one option: "Tiny Core Image Build". The RedPill boot entries from USB or SATA are gone. Quote Link to comment Share on other sites More sharing options...
ser-40in Posted January 23, 2022 Share #493 Posted January 23, 2022 (edited) Огромное спасибо pocopico за его работу. Благодаря ему, я смог обновить свой древний <Atom D2500> до версии 7.0.1 со второй попытки. Я использовал <sudo ./rploader.sh satamap now>, в первый раз я ничего не исправлял. SataPortMap=4 и это было неверно. Я заменил на число 2, так как у меня 2 диска JBOD array, и всё запустилось! Ещё раз спасибо. Many thanks to pocopico for his work. Thanks to him, I was able to upgrade my ancient <Atom D2500> to version 7.0.1 on the second attempt. I used <sudo./rploader.sh satamap now>, I didn't fix anything the first time. SataPortMap=4 and it was incorrect. I replaced it with the number 2, since I have 2 JBOD array disks, and everything started! Thanks again. Edited January 23, 2022 by ser-40in mistake Quote Link to comment Share on other sites More sharing options...
haydibe Posted January 23, 2022 Share #494 Posted January 23, 2022 11 minutes ago, synoxpe said: This addition however reduces the GRUB menu to only one option: "Tiny Core Image Build". The RedPill boot entries from USB or SATA are gone. Pitty seems the paramter (even though it should be a correct one accoring https://gugucomputing.wordpress.com/2018/11/11/experiment-on-sata_args-in-grub-cfg/) is not handled by rp-load. Remove it again a rebuild. Seems there is no "sata_remap" for us in the cards. I am pretty sure rp-load threw an error while building that indicates the error. Quote Link to comment Share on other sites More sharing options...
synoxpe Posted January 23, 2022 Share #495 Posted January 23, 2022 Yeah @haydibe I reverted back but can’t proceed due to the error mentioned earlier. Perhaps master @pocopico can wave his magic wand? Quote Link to comment Share on other sites More sharing options...
chickey Posted January 23, 2022 Share #496 Posted January 23, 2022 (edited) 10 hours ago, synoxpe said: I've seen this happening to a few users but wasn't able to zero in on a fix. Any tips? I've just one HDD connected to the SATA port of my Intel NUC 10iFNH motherboard. Following installation details: tc@box:~$ cat user_config.json { "extra_cmdline": { "pid": "0x5581", "vid": "0x0781", "sn": "1230LWN027216", "mac1": "001132BFE351", "SataPortMap": "3", "DiskIdxMap": "00" }, "synoinfo": { "internalportcfg" : "0xffff", "maxdisks" : "16" }, "ramdisk_copy": { } } tc@box:~$ lsscsi -Hv [0] ahci dir: /sys/class/scsi_host//host0 device dir: /sys/devices/pci0000:00/0000:00:17.0/ata1/host0 [1] ahci dir: /sys/class/scsi_host//host1 device dir: /sys/devices/pci0000:00/0000:00:17.0/ata2/host1 [2] ahci dir: /sys/class/scsi_host//host2 device dir: /sys/devices/pci0000:00/0000:00:17.0/ata3/host2 [3] usb-storage dir: /sys/class/scsi_host//host3 device dir: /sys/devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.0/host3 Telnet output from the Diskstation: DiskStation> fdisk -l Disk /dev/sdc: 149 GB, 160041885696 bytes, 312581808 sectors 19457 cylinders, 255 heads, 63 sectors/track Units: sectors of 1 * 512 = 512 bytes Device Boot StartCHS EndCHS StartLBA EndLBA Sectors Size Id Type /dev/sdc1 * 0,1,1 1023,254,63 63 48676949 48676887 23.2G 7 HPFS/NTFS /dev/sdc3 1023,0,2 1023,254,63 48676951 312576704 263899754 125G 7 HPFS/NTFS Disk /dev/sdu: 29 GB, 30752000000 bytes, 60062500 sectors 29327 cylinders, 64 heads, 32 sectors/track Units: sectors of 1 * 512 = 512 bytes Device Boot StartCHS EndCHS StartLBA EndLBA Sectors Size Id Type /dev/sdu1 * 0,32,33 6,62,56 2048 100351 98304 48.0M 83 Linux /dev/sdu2 6,62,57 15,205,62 100352 253951 153600 75.0M 83 Linux /dev/sdu3 15,205,63 130,138,8 253952 2097151 1843200 900M 83 Linux Try SataPortMap 1 and drop the sataremap Edited January 23, 2022 by chickey Quote Link to comment Share on other sites More sharing options...
billat29 Posted January 23, 2022 Share #497 Posted January 23, 2022 9 hours ago, PincoPalla said: must a new installation be made or can you do a migration? I am still testing on a N54L. I have created a 6.2.3 system on a spare disk and then migrated it to 7.0.1. There were a number of packages that wouldn't upgrade but that is nothing to do with Xpenology. Everything else seemed to work. But I haven't run it for long. And yes. When/if I do it, I will have a full backup and I will keep that up to date in case I have to fall back later. Quote Link to comment Share on other sites More sharing options...
Kaneske Posted January 23, 2022 Share #498 Posted January 23, 2022 @haydibe @pocopico maybe someone else… Is there a known and working Version of open VM Tools for getting ESXi to work with at 7.0.1 DSM? Since there might be an major change und Package handling i read about. And the ones out there won’t work with click&install… Quote Link to comment Share on other sites More sharing options...
haydibe Posted January 23, 2022 Share #499 Posted January 23, 2022 @synoxpe so the tinycore bootloader entry disapeared as well? I understood it still exist and you can still start tinycore. What error does it give you when you try to build after sata_remap is removed? @Kaneske I have no idea. I don't use ESXi since I switched to Proxmox. Actualy I am surprised that no one created a rp-extension for the open-vm-tools so far. I assume it's the way to go. Quote Link to comment Share on other sites More sharing options...
Kaneske Posted January 23, 2022 Share #500 Posted January 23, 2022 Would be on Promox too, if it was so gentle as ESXi, but VMWare is much more easy to handle. This is also just the last bit on the way to get Vanilla feeling, as disk Mapping is IMHO too. Thanks for Replay! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.