toyanucci Posted September 20, 2021 Share #1776 Posted September 20, 2021 8 hours ago, ct85msi said: My system, J3455B-ITX boots in aprox ~ 10 minutes. Wait more time. Left it for 30 minutes and it didn't seem to load still 🤷🏾♂️. Do you mind sharing exactly what files and method you used to build the image? Link to comment Share on other sites More sharing options...
Rabby Posted September 20, 2021 Share #1777 Posted September 20, 2021 On 9/4/2021 at 12:24 PM, tocinillo2 said: Compiled 7.0.1 with last BSP patch and works perfect https://drive.google.com/file/d/1CqqhO-TBdwOff0dH54iP-XPdrhzgvtNR/view?usp=sharing - Add UEFI support. - Deleted twice EFI folder. - Fixed SynoBoot_EFI place. - Compiled with last BSP Patch for 7.0.1. - Insmod efi_gop into EFI. - Tested with Baremetal and works fine (Astock 3455-ITX). - After installation (the reboot process can take 15-20 minutes) you have to install File Station manually: https://www.synology.com/en-us/support/download/DS918+#system (select DSM 7.0), find and download File Station SPK and install it in Package Center. Works well on my ASROCK 3455B-ITX, thanks very much. Although I discovered that the SYNOLOGY DRIVE SERVER and OFFICE packages cannot be installed. (I didn't try all, maybe there are still some more) Link to comment Share on other sites More sharing options...
erkify Posted September 20, 2021 Share #1778 Posted September 20, 2021 On 19/9/2021 at 7:03, nemesis122 said: Toda la noche el servidor estuvo funcionando y disfrutó de su vida. actualice Docker a la versión 1239 esta mañana utilicé filezilla y copié archivos a través del protocolo ftp después de 500 GB, el servidor perdió la conexión de red, tengo que reiniciar el servidor e iniciar Docker nuevamente y el servidor se reinicia nuevamente falla -> configure docker new JD2 y filezilla y el servidor se reinicia nuevamente choque Salida de consola: [250.810133] Rastreo de llamadas: [250.821880] <NMI> [<ffffffff814a2759>]? dump_stack + 0xc / 0x15 [250.850334] [<ffffffff814a16b1>]? pánico + 0xbb / 0x1df [250.875015] [<ffffffff810a9eb8>]? watchdog_overflow_callback + 0xa8 / 0xb0 [250.907339] [<ffffffff810db7d3>]? __perf_event_overflow + 0x93 / 0x230 [250.938568] [<ffffffff810da612>]? perf_event_update_userpage + 0x12 / 0xf0 [250.970751] [<ffffffff810152a4>]? intel_pmu_handle_irq + 0x1b4 / 0x340 [251.001576] [<ffffffff814a9d06>]? perf_event_nmi_handler + 0x26 / 0x40 [251.032170] [<ffffffff814a944e>]? do_nmi + 0xfe / 0x440 [251.056806] [<ffffffff814a8a53>]? end_repeat_nmi + 0x1e / 0x7e El 18/9/2021 a las 23:55, nemesis122 dijo: usó el martillo, nada se reinicia😀 I have been doing tests with a single pihole container, I restored it from 0 and had a restart on my Gen8, for now I stop Docker waiting for the boot to advance. Thanks to those of you who advance in this project. Link to comment Share on other sites More sharing options...
toyanucci Posted September 20, 2021 Share #1779 Posted September 20, 2021 (edited) 2 hours ago, Rabby said: Works well on my ASROCK 3455B-ITX, thanks very much. Although I discovered that the SYNOLOGY DRIVE SERVER and OFFICE packages cannot be installed. (I didn't try all, maybe there are still some more) Baremetal with onboard nic? How long did it take to boot? Edited September 20, 2021 by toyanucci Link to comment Share on other sites More sharing options...
Amoureux Posted September 20, 2021 Share #1780 Posted September 20, 2021 (edited) Today I started DSM7.0 with RedPill and VMwareFusion on my MacBook Pro, but after power off my notebook the virtual machine is not boot. The experiment was repeated twice. Both times the result is the same I am stupid.🤣 Edited September 20, 2021 by Amoureux Link to comment Share on other sites More sharing options...
someone1 Posted September 20, 2021 Share #1781 Posted September 20, 2021 (edited) Have anyone got Face detection work in Photos with Redpill 918+ in Proxmox? My usr/syno/etc/codec/activation.conf contains {"success":true,"activated_codec":["hevc_dec","h264_dec","h264_enc","mpeg4part2_dec"],"token":"**REMOVED**"} dev/dri/ contains card0 renderD128 However no faces gets detected. Cheers... I love the progress of redpill Edited September 20, 2021 by someone1 Link to comment Share on other sites More sharing options...
Orphée Posted September 20, 2021 Share #1782 Posted September 20, 2021 7 minutes ago, someone1 said: Have anyone got Face detection work in Photos with Redpill 918+ in Proxmox? My usr/syno/etc/codec/activation.conf contains {"success":true,"activated_codec":["hevc_dec","h264_dec","h264_enc","mpeg4part2_dec"],"token":"**REMOVED**"} dev/dri/ contains card0 renderD128 However no faces gets detected. Cheers... I love the progress of redpill Face detection works for me on ds3615xs. Real SN and Mac. I only had to change cpu to 2 cpu / 2 core Link to comment Share on other sites More sharing options...
someone1 Posted September 20, 2021 Share #1783 Posted September 20, 2021 3 minutes ago, Orphée said: Face detection works for me on ds3615xs. Real SN and Mac. I only had to change cpu to 2 cpu / 2 core I saw some comment to add more cpu/core , however didnt solve my issue? Which PAT file do you use for the ds3615xs install? The only one i found was 7.0.1RC , which failed to install.. Link to comment Share on other sites More sharing options...
Orphée Posted September 20, 2021 Share #1784 Posted September 20, 2021 Running 7.0.1 RC on ESXi Link to comment Share on other sites More sharing options...
someone1 Posted September 20, 2021 Share #1785 Posted September 20, 2021 3 minutes ago, Orphée said: Running 7.0.1 RC on ESXi I asked about Proxmox I may test ESXi instead ... Link to comment Share on other sites More sharing options...
dodo-dk Posted September 20, 2021 Share #1786 Posted September 20, 2021 you can try to switch the cpu setting in Proxmox from kvm64 to haswell or something. kvm64 don‘t work with facedetection on some systems. Link to comment Share on other sites More sharing options...
man275 Posted September 20, 2021 Share #1787 Posted September 20, 2021 For those who are stuck on file corrupted error (13) during DSM installation step with ESXi, I would like to share my workarounds. There are two things I've missed. 1. Choose SATA mode instead of USB! USB boot is for baremetal (physical usb thumb drive) or virtual USB emulation for hypervisor. The one we used to choose in the previous Jun's loader is just introduced in redpill by the latest update. So try with SATA mode passing synoboot_satadom=2 in grub.cfg. 2. Check your vmdk For long time, I have used a pair of files as bootloader, raw disk image file and dummy vmdk file which is pointing actual image file. This was the mistake. To obtain valid vmdk file, I first convert built img file using "qemu-img convert -f raw -O vmdk redpill-DS918+_6.2.4-25556_b1632162635.img boot.vmdk" in ubuntu shell, then again convert "vmkfstools -i boot.vmdk -d thin bootin.vmdk" in ESXi shell. Please let me know better way to do this. After these two things are resolved, it finishes DSM installation process and finally shows login screen! Thanks! 2 Link to comment Share on other sites More sharing options...
Franks4fingers Posted September 21, 2021 Share #1788 Posted September 21, 2021 4 hours ago, man275 said: For those who are stuck on file corrupted error (13) during DSM installation step with ESXi, I would like to share my workarounds. There are two things I've missed. 1. Choose SATA mode instead of USB! USB boot is for baremetal (physical usb thumb drive) or virtual USB emulation for hypervisor. The one we used to choose in the previous Jun's loader is just introduced in redpill by the latest update. So try with SATA mode passing synoboot_satadom=2 in grub.cfg. 2. Check your vmdk For long time, I have used a pair of files as bootloader, raw disk image file and dummy vmdk file which is pointing actual image file. This was the mistake. To obtain valid vmdk file, I first convert built img file using "qemu-img convert -f raw -O vmdk redpill-DS918+_6.2.4-25556_b1632162635.img boot.vmdk" in ubuntu shell, then again convert "vmkfstools -i boot.vmdk -d thin bootin.vmdk" in ESXi shell. Please let me know better way to do this. After these two things are resolved, it finishes DSM installation process and finally shows login screen! Thanks! Whilst you mention this fixed things up for ESXi, does anyone know if its a similar process / requirement for Proxmox? I am going to be using Proxmox for the first time (ever) on a test PC that I have so knowing the key pieces would be great. Great work from all involved in getting things this far 😀 Link to comment Share on other sites More sharing options...
taiziccf Posted September 21, 2021 Share #1789 Posted September 21, 2021 (edited) 6 hours ago, someone1 said: I asked about Proxmox I may test ESXi instead ... i am running 7.0.1RC 918+ in proxmox, you need any help? ps: noted you asking about Face Detection, i am not using it. Edited September 21, 2021 by taiziccf Link to comment Share on other sites More sharing options...
u357 Posted September 21, 2021 Share #1790 Posted September 21, 2021 1 hour ago, Franks4fingers said: Whilst you mention this fixed things up for ESXi, does anyone know if its a similar process / requirement for Proxmox? I am going to be using Proxmox for the first time (ever) on a test PC that I have so knowing the key pieces would be great. Great work from all involved in getting things this far 😀 PVE is the easiest way to install DSM 7 Link to comment Share on other sites More sharing options...
someone1 Posted September 21, 2021 Share #1791 Posted September 21, 2021 8 hours ago, dodo-dk said: you can try to switch the cpu setting in Proxmox from kvm64 to haswell or something. kvm64 don‘t work with facedetection on some systems. Did not help. Did a full wipe of the DSM after i changed the CPU to Haswell. Getting some error messages ash-4.4# cat /var/log/messages | grep photo 2021-09-21T07:43:05+02:00 hackology synofoto-face-extraction[21895]: /source/synophoto-plugin-face/src/face_plugin/lib/face_detection.cpp:214 Error: (face plugin) load network failed 2021-09-21T07:43:05+02:00 hackology synofoto-face-extraction[21895]: uncaught thread task exception /source/synofoto/src/daemon/plugin/plugin_worker.cpp:90 plugin init failed: /var/packages/SynologyPhotos/target/usr/lib/libsynophoto-plugin-face.so 2021-09-21T07:43:05+02:00 hackology synofoto-face-extraction[21895]: /source/synophoto-plugin-face/src/face_plugin/lib/face_detection.cpp:214 Error: (face plugin) load network failed 2021-09-21T07:43:05+02:00 hackology synofoto-face-extraction[21895]: uncaught thread task exception /source/synofoto/src/daemon/plugin/plugin_worker.cpp:90 plugin init failed: /var/packages/SynologyPhotos/target/usr/lib/libsynophoto-plugin-face.so 2021-09-21T07:43:05+02:00 hackology synofoto-face-extraction[21895]: /source/synophoto-plugin-face/src/face_plugin/lib/face_detection.cpp:214 Error: (face plugin) load network failed 2021-09-21T07:43:05+02:00 hackology synofoto-face-extraction[21895]: uncaught thread task exception /source/synofoto/src/daemon/plugin/plugin_worker.cpp:90 plugin init failed: /var/packages/SynologyPhotos/target/usr/lib/libsynophoto-plugin-face.so 2021-09-21T07:43:05+02:00 hackology synofoto-face-extraction[21895]: /source/synophoto-plugin-face/src/face_plugin/lib/face_detection.cpp:214 Error: (face plugin) load network failed 2021-09-21T07:43:05+02:00 hackology synofoto-face-extraction[21895]: uncaught thread task exception /source/synofoto/src/daemon/plugin/plugin_worker.cpp:90 plugin init failed: /var/packages/SynologyPhotos/target/usr/lib/libsynophoto-plugin-face.so 2021-09-21T07:43:05+02:00 hackology synofoto-face-extraction[21895]: /source/synophoto-plugin-face/src/face_plugin/lib/face_detection.cpp:214 Error: (face plugin) load network failed 2021-09-21T07:43:05+02:00 hackology synofoto-face-extraction[21895]: uncaught thread task exception /source/synofoto/src/daemon/plugin/plugin_worker.cpp:90 plugin init failed: /var/packages/SynologyPhotos/target/usr/lib/libsynophoto-plugin-face.so Link to comment Share on other sites More sharing options...
Rabby Posted September 21, 2021 Share #1792 Posted September 21, 2021 12 hours ago, toyanucci said: Baremetal with onboard nic? How long did it take to boot? First restart was about 10 minutes after install, but I didn't try it again. FYI, 6.2 with JUN's loader took 8-10 minutes on the same motherboard. Link to comment Share on other sites More sharing options...
Orphée Posted September 21, 2021 Share #1793 Posted September 21, 2021 (edited) Did someone successfully updated from 6.2.4 to 6.2.4 update 2 ? when I tried a week or two ago, update failed for me... Edit : Inside the update 2 PAT file, there is a flashupdate_6.2-25556-s2_all.deb it contains : Edited September 21, 2021 by Orphée Link to comment Share on other sites More sharing options...
man275 Posted September 21, 2021 Share #1794 Posted September 21, 2021 @Orphée Confirmed not working for me as well. Once updated, it goes to recover. Something might be overwritten. Link to comment Share on other sites More sharing options...
pocopico Posted September 21, 2021 Share #1795 Posted September 21, 2021 1 hour ago, Orphée said: Did someone successfully updated from 6.2.4 to 6.2.4 update 2 ? when I tried a week or two ago, update failed for me... Edit : Inside the update 2 PAT file, there is a flashupdate_6.2-25556-s2_all.deb it contains : As it was with Jun loader some files in the loader will be overwritten (Mainly rd.gz and zImage). Recover the loader from a known working image and try to see if this works. Link to comment Share on other sites More sharing options...
Franks4fingers Posted September 21, 2021 Share #1796 Posted September 21, 2021 5 hours ago, u357 said: PVE is the easiest way to install DSM 7 Did you upgrade from a previous version of 6.* or a fresh install straight to 7? What steps did you follow to get to 7 (whichever way you achieved that)? Link to comment Share on other sites More sharing options...
WowaDriver Posted September 21, 2021 Share #1797 Posted September 21, 2021 @all: Any news about LSi 9211-i8 in IT-Mode compatibilities? I have to passthrough one HBA with 8 HDD's in RADI5 in Unraid Link to comment Share on other sites More sharing options...
Orphée Posted September 21, 2021 Share #1798 Posted September 21, 2021 2 minutes ago, WowaDriver said: @all: Any news about LSi 9211-i8 in IT-Mode compatibilities? I have to passthrough one HBA with 8 HDD's in RADI5 in Unraid https://github.com/RedPill-TTG/redpill-lkm/issues/19 Link to comment Share on other sites More sharing options...
Null Posted September 21, 2021 Share #1799 Posted September 21, 2021 synology today updated the photo suite to fix the problem of face recognition 1 Link to comment Share on other sites More sharing options...
pigr8 Posted September 21, 2021 Share #1800 Posted September 21, 2021 9 minutes ago, Orphée said: https://github.com/RedPill-TTG/redpill-lkm/issues/19 yeah exactly what happens to everyone trying passthrough me included, it *should* work since the flag support sas can be enabled but dsm refuses to use them. shouldn't be a dsm problem, for sure something redpill related. btw in esxi how do you use the loader? mounted in sata0 controller? i tried multiple times but using the sata mode in grub loads everything but no /dev/synoboot* is created :S wierd. Link to comment Share on other sites More sharing options...
Recommended Posts