YouMeXPE Posted September 18, 2021 Share #1726 Posted September 18, 2021 1 hour ago, WiteWulf said: Everyone that's contacted me so far has been using either Xeon or Celeron CPUs, I've not heard from anyone with non-Intel CPU so far. Also, I (and others) extensively used docker on 6.2.3 and earlier versions on Jun's boot loader. These problems have only been observed on DSM 6.2.4 and 7.x since moving to redpill, and only on DS3615xs. Would it make sense to create a 6.2.3 / Redpill combo to test if it's related to either Redpill OR 6.2.4 ? As I see it, there have been two changes: Jun's -> Redpill and 6.2.3 -> 6.2.4 Link to comment Share on other sites More sharing options...
altas Posted September 18, 2021 Share #1727 Posted September 18, 2021 1 hour ago, altas said: is it possible to upgrade from DSM 7.0 to DSM 7.0.1 with the DSM7.0 Redpill Loader ? Upgrade done! 1. download the 7.0.1 from Synology 2. start upgrade on the currrent DSM 7.0 3. compile the Loader for 7.01 (i used a new USB Stick) 4.Shutdown the GEn8 replace the USB Stick with the new 7.0.1 Loader onit 5. Start the Gen8 and maybe 5min later you should have access again on the WebPage Link to comment Share on other sites More sharing options...
erkify Posted September 18, 2021 Share #1728 Posted September 18, 2021 Hp Gen8 - Baremetal - DS3615xs - DSM 7.0.1 CPU Intel (R) Xeon (R) E3-1265 V2 remove from "automatic" to disabled IPv6, update Docker to version 1239 and activate only Pihole and Tautulli, at the moment 45 minutes on without restart. Before that activate these two containers and later activate the portainer, at the moment it restarted, for now I'm going to try these two to see what happens. * I have also updated ilo to version 2.78 Link to comment Share on other sites More sharing options...
nemesis122 Posted September 18, 2021 Share #1729 Posted September 18, 2021 (edited) hi at the moment im testing the same yep and it seems stable remove from "automatic" to disabled IPv6, update Docker to version 1239 with JD2 and Filezilla😆 * I have also updated ilo to version 2.78 * also and the bios to 2019 * and provisioning to the newest version * now running virtual DSM btw i have update my other Gen 8 to 1.03b with 3617 before it was 1.03b 3615 and smb has increased from 250MB to 900MB why????? Specs: 1240 v2 Xeon with 16gb RAM 4x 6tb wd Red 1TB SSD as chache drive and Intel 520 SFP+ Edited September 18, 2021 by nemesis122 Link to comment Share on other sites More sharing options...
nemesis122 Posted September 18, 2021 Share #1730 Posted September 18, 2021 used the hammer nothing reboots😀 Link to comment Share on other sites More sharing options...
rok1 Posted September 18, 2021 Share #1731 Posted September 18, 2021 I built a new nas using a SuperMicro C7B250-CB-ML w/i7-7700/32gb ram. I added an old Intel 1000PT and it's working just fine on 918+ 7.0.1. I run one docker (Tautulli) and 1 VM (Valheim Server using debian). I did have to install opkg (lmsensor support) via command line, but otherwise, it's working great. Link to comment Share on other sites More sharing options...
erkify Posted September 19, 2021 Share #1732 Posted September 19, 2021 némesis122 With Tautulli and Pihole still running smoothly, do you have a lot of containers working? Link to comment Share on other sites More sharing options...
nemesis122 Posted September 19, 2021 Share #1733 Posted September 19, 2021 (edited) All night the server was running and enjoyed his life. update Docker to version 1239 this morning i used filezilla and copy files over the ftp protocoll after 500GB the server lost the network connection i have to reboot the server and started Docker again and the server reboots again crash --> set docker new JD2 and filezilla and the Server reboots again crash Console output: [ 250.810133] Call Trace: [ 250.821880] <NMI> [<ffffffff814a2759>] ? dump_stack+0xc/0x15 [ 250.850334] [<ffffffff814a16b1>] ? panic+0xbb/0x1df [ 250.875015] [<ffffffff810a9eb8>] ? watchdog_overflow_callback+0xa8/0xb0 [ 250.907339] [<ffffffff810db7d3>] ? __perf_event_overflow+0x93/0x230 [ 250.938568] [<ffffffff810da612>] ? perf_event_update_userpage+0x12/0xf0 [ 250.970751] [<ffffffff810152a4>] ? intel_pmu_handle_irq+0x1b4/0x340 [ 251.001576] [<ffffffff814a9d06>] ? perf_event_nmi_handler+0x26/0x40 [ 251.032170] [<ffffffff814a944e>] ? do_nmi+0xfe/0x440 [ 251.056806] [<ffffffff814a8a53>] ? end_repeat_nmi+0x1e/0x7e Edited September 19, 2021 by nemesis122 Link to comment Share on other sites More sharing options...
erkify Posted September 19, 2021 Share #1734 Posted September 19, 2021 Last night I picked up the rest of the containers apart from Tautulli and Pihole that if they go well, this morning it started to restart continuously, I have left Pihole and Tautulli alone to see how it is, I don't know exactly why. Link to comment Share on other sites More sharing options...
cferra Posted September 19, 2021 Share #1735 Posted September 19, 2021 Could be kernel related to the flavor of Linux that is required for the specific containers that you guys are running Link to comment Share on other sites More sharing options...
WiteWulf Posted September 19, 2021 Share #1736 Posted September 19, 2021 The docker crash behaviour seems to be quite specific to individuals' set up. A few people here have tried to run influxdb, at my suggestion, with no problems, while it crashes my system each time. Others are having repeated problems with jdownloader2, which I tried and was completely stable. Since we're all running with different data, I think this may be influenced by the load generated by the docker containers causing ppl problems (Java and database containers seem particularly problematic) 🤔 Likewise, while influxdb causes me problems, I've several other docker containers that continue to run on my system without problems. Link to comment Share on other sites More sharing options...
nemesis122 Posted September 19, 2021 Share #1737 Posted September 19, 2021 (edited) the loader DSM 7 918 this one is stable on Baremetall? Edited September 19, 2021 by nemesis122 Link to comment Share on other sites More sharing options...
ct85msi Posted September 19, 2021 Share #1738 Posted September 19, 2021 I have DS918+ booloader, baremetal. I have no problem with docker. Even Face detection works fine. No unexpected reboots, no errors. root@Apollo:~# tail -f /var/log/synofoto.log 2021-09-19T21:13:25+03:00 Apollo synofoto-notify-center[15504]: /source/synofoto/src/daemon/notify-center/process/sdk_request.cpp:14 User Home Enable Change 2021-09-19T21:19:03+03:00 Apollo synoscgi_SYNO.Foto.Setting.User_1_set[18046]: /source/synofoto/src/webapi/module/Foto/Setting/user_setting.cpp:243 User sorin(1026) enable FaceExtraction 2021-09-19T21:19:03+03:00 Apollo synofoto-notify-center[15504]: /source/synofoto/src/daemon/notify-center/process.cpp:45 Reload File Extension 2021-09-19T21:19:03+03:00 Apollo synofoto-task-center[15273]: /source/synofoto/src/daemon/task-center/process/process_daemon_action.cpp:58 Reload File Extension 2021-09-19T21:21:54+03:00 Apollo synofoto-face-extraction[15502]: /source/synophoto-plugin-face/src/face_plugin/main.cpp:22 face plugin init 2021-09-19T21:22:42+03:00 Apollo synofoto-task-center[15273]: /source/synofoto/src/daemon/task-center/plugin-monitor/plugin_monitor_send_request.cpp:71 send unload plugin 4 2021-09-19T21:22:42+03:00 Apollo synofoto-task-center[15273]: /source/synofoto/src/daemon/task-center/person/face_extraction_queue.cpp:172 FaceExtractionQueue Collecting 2021-09-19T21:22:46+03:00 Apollo synofoto-face-extraction[15502]: /source/synophoto-plugin-face/src/face_plugin/main.cpp:28 face plugin shutdown 2021-09-19T21:24:46+03:00 Apollo synofoto-task-center[15273]: /source/synofoto/src/daemon/task-center/plugin-monitor/plugin_monitor_send_request.cpp:71 send unload plugin 5 2021-09-19T21:24:48+03:00 Apollo synofoto-person-clustering[15514]: /source/synofoto/src/daemon/plugin-person/clustering_plugin_handler.cpp:175 Clustering plugin shutdown 1 Link to comment Share on other sites More sharing options...
toyanucci Posted September 19, 2021 Share #1739 Posted September 19, 2021 Created the bootable USB but when I try to boot it hangs at starting the kernel. Happens with apollolake 7.0 and 7.0.1. Anyone able to point me in the right direction? 🥲 Link to comment Share on other sites More sharing options...
WiteWulf Posted September 19, 2021 Share #1740 Posted September 19, 2021 (edited) 12 minutes ago, toyanucci said: Created the bootable USB but when I try to boot it hangs at starting the kernel. Happens with apollolake 7.0 and 7.0.1. Anyone able to point me in the right direction? 🥲 You seeing something like this? If so it's not hanging, it's just there's no more output to the screen from that point as there's no frame buffer driver in the Synology kernel. Jun's bootloader used to put a message on screen to this effect, something that would be quite helpful in redpill, too, I think. Further boot information is output to the serial port. If you're on a machine with a physical serial port you can view it there. If you're using ESXi or proxmox you'll need to attach a virtual serial port. If you're using some server-grade hardware with lights-out management you may be able to attach to it via ssh or web UI. You should be able to connect to the server's web UI once it boots and gets a DHCP lease, though. Have a look in your DHCP server logs to find it's IP address, or use the Synology Assistant tool to find it. Edited September 19, 2021 by WiteWulf Link to comment Share on other sites More sharing options...
toyanucci Posted September 19, 2021 Share #1741 Posted September 19, 2021 (edited) 16 minutes ago, WiteWulf said: You seeing something like this? If so it's not hanging, it's just there's no more output to the screen from that point as there's no frame buffer driver in the Synology kernel. Jun's bootloader used to put a message on screen to this effect, something that would be quite helpful in redpill, too, I think. Further boot information is output to the serial port. If you're on a machine with a physical serial port you can view it there. If you're using ESXi or proxmox you'll need to attach a virtual serial port. If you're using some server-grade hardware with lights-out management you may be able to attach to it via ssh or web UI. You should be able to connect to the server's web UI once it boots and gets a DHCP lease, though. Have a look in your DHCP server logs to find it's IP address, or use the Synology Assistant tool to find it. I wasn't able to connect to the web ui though I had left it for like 5 minutes in that state. Maybe something else has gone wrong 🤔. I'll try again when I get home and hope for the best! Thanks for the quick reply! Last question...about how long would it take before the web ui becomes accessible on boot? Edited September 19, 2021 by toyanucci Link to comment Share on other sites More sharing options...
WiteWulf Posted September 19, 2021 Share #1742 Posted September 19, 2021 Sounds like your system isn't bringing up the network, then. Check that your hardware is supported. If you post full details of your system people here can probably let you know what's supported or not. Link to comment Share on other sites More sharing options...
Dreadnought Posted September 19, 2021 Share #1743 Posted September 19, 2021 On 9/15/2021 at 12:36 AM, Amoureux said: I tried boot up redpill on my Mac with VMware Fusion, but I can't find server after start. VMwareFusion_BigSur_11.5.2.zip 49.35 kB · 11 downloads Hi, do you find a solution to get the network interface online? Link to comment Share on other sites More sharing options...
Amoureux Posted September 19, 2021 Share #1744 Posted September 19, 2021 13 минуты назад, Dreadnought сказал: Hi, do you find a solution to get the network interface online? not found at the moment. Link to comment Share on other sites More sharing options...
apriliars3 Posted September 19, 2021 Share #1745 Posted September 19, 2021 Hi, do you find a solution to get the network interface online?Change nic E1000 to E1000e. 1 Link to comment Share on other sites More sharing options...
toyanucci Posted September 19, 2021 Share #1746 Posted September 19, 2021 (edited) 59 minutes ago, WiteWulf said: Sounds like your system isn't bringing up the network, then. Check that your hardware is supported. If you post full details of your system people here can probably let you know what's supported or not. I'm using the ASRock J4105 ITX motherboard. The network card it uses is the Realtek RTL8111H. I guess the problem is the NIC...I just assumed it worked but I guess I'll need to get a compatible one. I'll search the thread when I get home or if you have any recommendations I'd appreciate it! Edited September 19, 2021 by toyanucci Link to comment Share on other sites More sharing options...
Dreadnought Posted September 19, 2021 Share #1747 Posted September 19, 2021 (edited) 15 minutes ago, apriliars3 said: Change nic E1000 to E1000e. Sorry for the stupid question but how? one minute with google and I found a way: https://www.blackmanticore.com/e18dc84d28941e69dc059e53b64f5279 Edited September 19, 2021 by Dreadnought Update Link to comment Share on other sites More sharing options...
Amoureux Posted September 19, 2021 Share #1748 Posted September 19, 2021 56 минут назад, apriliars3 сказал: Change nic E1000 to E1000e. Synology Assistant not found station, but in log I have ip address 192.168.24.4. It works! thanks! But no disks Link to comment Share on other sites More sharing options...
apriliars3 Posted September 19, 2021 Share #1749 Posted September 19, 2021 2 minutes ago, Amoureux said: Synology Assistant not found station, but in log I have ip address 192.168.24.4. It works! thanks! But no disks Add one more vmware disk like sata with the disk 128 MB sata boot. Insert an image with your WMWare Fusion settings Link to comment Share on other sites More sharing options...
Amoureux Posted September 19, 2021 Share #1750 Posted September 19, 2021 (edited) 10 минут назад, apriliars3 сказал: Add one more vmware disk like sata with the disk 128 MB sata boot. Insert an image with your WMWare Fusion settings Red.vmx.zip Edited September 19, 2021 by Amoureux Link to comment Share on other sites More sharing options...
Recommended Posts