Search the Community

[ 0.091203] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1]) [ 0.091509] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1]) [ 0.091814] ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1]) [ 0.092119] ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1]) [ 0.092425] ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1]) [ 0.092730] ACPI: LAPIC_NMI (acpi_id[0x0c] high edge lint[0x1]) [ 0.093035] ACPI: LAPIC_NMI (acpi_id[0x0d] high edge lint[0x1]) [ 0.093341] ACPI: LAPIC_NMI (acpi_id[0x0e] high edge lint[0x1]) [ 0.093646] ACPI: LAPIC_NMI (acpi_id[0x0f] high edge lint[0x1]) [ 0.093952] ACPI: LAPIC_NMI (acpi_id[0x10] high edge lint[0x1]) [ 0.094289] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119 [ 0.094649] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.094977] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.095319] ACPI: IRQ0 used by override. [ 0.095522] ACPI: IRQ9 used by override. [ 0.095725] Using ACPI (MADT) for SMP configuration information [ 0.096031] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.096298] TSC deadline timer available [ 0.096502] smpboot: Allowing 8 CPUs, 0 hotplug CPUs [ 0.096768] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.097165] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x000fffff] [ 0.097556] PM: hibernation: Registered nosave memory: [mem 0x39f99000-0x3a898fff] [ 0.097947] PM: hibernation: Registered nosave memory: [mem 0x434af000-0x452fefff] [ 0.098338] PM: hibernation: Registered nosave memory: [mem 0x452ff000-0x45b2efff] [ 0.098729] PM: hibernation: Registered nosave memory: [mem 0x45b2f000-0x45bfefff] [ 0.099120] PM: hibernation: Registered nosave memory: [mem 0x45c00000-0x49ffffff] [ 0.099510] PM: hibernation: Registered nosave memory: [mem 0x4a000000-0x4a1fffff] [ 0.099901] PM: hibernation: Registered nosave memory: [mem 0x4a200000-0x4a3fffff] [ 0.100291] PM: hibernation: Registered nosave memory: [mem 0x4a400000-0x4affffff] [ 0.100682] PM: hibernation: Registered nosave memory: [mem 0x4b000000-0x503fffff] [ 0.101073] PM: hibernation: Registered nosave memory: [mem 0x50400000-0xfe00ffff] [ 0.101463] PM: hibernation: Registered nosave memory: [mem 0xfe010000-0xfe010fff] [ 0.101855] PM: hibernation: Registered nosave memory: [mem 0xfe011000-0xfed1ffff] [ 0.102248] PM: hibernation: Registered nosave memory: [mem 0xfed20000-0xfed7ffff] [ 0.102638] PM: hibernation: Registered nosave memory: [mem 0xfed80000-0xfeffffff] [ 0.103029] PM: hibernation: Registered nosave memory: [mem 0xff000000-0xffffffff] [ 0.103420] [mem 0x50400000-0xfe00ffff] available for PCI devices [ 0.103737] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.106862] setup_percpu: NR_CPUS:24 nr_cpumask_bits:24 nr_cpu_ids:8 nr_node_ids:1 [ 0.107380] percpu: Embedded 53 pages/cpu s176664 r8192 d32232 u262144 [ 0.107723] pcpu-alloc: s176664 r8192 d32232 u262144 alloc=1*2097152 [ 0.108052] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.108286] Built 1 zonelists, mobility grouping on. Total pages: 4074138 [ 0.108645] Policy zone: Normal [ 0.108808] Kernel command line: withefi earlyprintk syno_hw_version=SA6400 console=ttyS0,115200n8 netif_num=2 pid=0x5583 earlycon=uart8250,io,0x3f8,115200n8 syno_port_thaw=1 SasIdxMap=0 mac2=94DE806D73B4 mac1=001132C7F4BE sn=1980PDN028952 SMBusHddDynamicPower=0 vid=0x0781 elevator=elevator loglevel=15 HddHotplug=0 DiskIdxMap syno_hdd_detect=0 vender_format_version=2 sataboot2 syno_hdd_powerup_seq=0 log_buf_len=32M root=/dev/md0 SataPortMap syno_ttyS1=serial,0x2f8 syno_ttyS0=serial,0x3f8 [ 0.111059] Synology Hardware Version: SA6400 [ 0.111292] Internal netif num: 2 [ 0.111481] Mac2: 94DE806D73B4 [ 0.111644] Mac1: 001132C7F4BE [ 0.111803] Serial Number: 1980PDN028952 [ 0.112012] Kernel parameter elevator= does not have any effect anymore. Please use sysfs to set IO scheduler for individual devices. [ 0.112716] Vender format version: 2 [ 0.113400] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear) [ 0.114044] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.114507] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.139885] Memory: 15942936K/16555320K available (10248K kernel code, 4829K rwdata, 5800K rodata, 1344K init, 10984K bss, 612128K reserved, 0K cma-reserved) [ 0.140645] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.140987] ftrace: allocating 32589 entries in 128 pages [ 0.148606] ftrace: allocated 128 pages with 1 groups [ 0.148928] rcu: Hierarchical RCU implementation. [ 0.149174] rcu: RCU restricting CPUs from NR_CPUS=24 to nr_cpu_ids=8. [ 0.149515] Rude variant of Tasks RCU enabled. [ 0.149749] Tracing variant of Tasks RCU enabled. [ 0.149996] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.150391] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.153104] NR_IRQS: 4352, nr_irqs: 2048, preallocated irqs: 16 [ 0.153862] Console: colour dummy device 80x25 [ 0.154101] ACPI: Core revision 20200925 [ 0.154670] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 99544814920 ns [ 0.155235] APIC: Switch to symmetric I/O mode setup [ 0.155492] DMAR: Host address width 39 [ 0.155690] DMAR: DRHD base: 0x000000fed90000 flags: 0x0 [ 0.155966] DMAR: dmar0: reg_base_addr fed90000 ver 4:0 cap 1c0000c40660462 ecap 29a00f0505e [ 0.156438] DMAR: DRHD base: 0x000000fed84000 flags: 0x0 [ 0.156715] DMAR: dmar1: reg_base_addr fed84000 ver 1:0 cap d2008c40660462 ecap f050da [ 0.157124] DMAR: DRHD base: 0x000000fed91000 flags: 0x1 [ 0.157438] DMAR: dmar2: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da [ 0.157847] DMAR: RMRR base: 0x0000004c000000 end: 0x000000503fffff [ 0.158171] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 2 [ 0.158536] DMAR-IR: HPET id 0 under DRHD base 0xfed91000 [ 0.158814] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. [ 0.160997] DMAR-IR: Enabled IRQ remapping in x2apic mode [ 0.161283] x2apic enabled [ 0.161484] Switched APIC routing to cluster x2apic. [ 0.166436] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.171205] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x22df1149949, max_idle_ns: 440795312789 ns [ 0.171785] Calibrating delay loop (skipped), value calculated using timer frequency.. 4838.40 BogoMIPS (lpj=2419200) [ 0.172785] pid_max: default: 32768 minimum: 301 [ 0.173040] LSM: Security Framework initializing [ 0.173299] AppArmor: AppArmor initialized [ 0.173542] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.173805] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.174362] x86/cpu: User Mode Instruction Prevention (UMIP) activated [ 0.174815] mce: CPU0: Thermal monitoring enabled (TM1) [ 0.175148] process: using mwait in idle threads [ 0.175390] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 [ 0.175785] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 [ 0.176092] Speculative Store Bypass: Vulnerable [ 0.176439] Freeing SMP alternatives memory: 32K [ 0.176839] smpboot: CPU0: 11th Gen Intel(R) Core(TM) i5-1135G7 @ 2.40GHz (family: 0x6, model: 0x8c, stepping: 0x1) [ 0.177434] Performance Events: PEBS fmt4+-baseline, AnyThread deprecated, Icelake events, 32-deep LBR, full-width counters, Intel PMU driver. [ 0.177786] ... version: 5 [ 0.177992] ... bit width: 48 [ 0.178203] ... generic registers: 8 [ 0.178410] ... value mask: 0000ffffffffffff [ 0.178684] ... max period: 00007fffffffffff [ 0.178785] ... fixed-purpose events: 4 [ 0.178992] ... event mask: 0001000f000000ff [ 0.179323] rcu: Hierarchical SRCU implementation. [ 0.179942] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.180348] smp: Bringing up secondary CPUs ... [ 0.180622] x86: Booting SMP configuration: [ 0.180786] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 [ 0.186163] smp: Brought up 1 node, 8 CPUs [ 0.186293] smpboot: Max logical packages: 1 [ 0.186786] smpboot: Total of 8 processors activated (38707.20 BogoMIPS) [ 0.188006] devtmpfs: initialized [ 0.188042] random: get_random_u32 called from bucket_table_alloc.isra.0+0x6e/0x160 with crng_init=0 [ 0.188050] PM: Registering ACPI NVS region [mem 0x452ff000-0x45b2efff] (8585216 bytes) [ 0.189284] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.189789] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.190182] pinctrl core: initialized pinctrl subsystem [ 0.190569] NET: Registered protocol family 16 [ 0.190835] audit: initializing netlink subsys (disabled) [ 0.191120] audit: type=2000 audit(1700704115.031:1): state=initialized audit_enabled=0 res=1 [ 0.191120] thermal_sys: Registered thermal governor 'step_wise' [ 0.191265] cpuidle: using governor ladder [ 0.191999] cpuidle: using governor menu [ 0.192214] ACPI: bus type PCI registered [ 0.192214] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.192828] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xc0000000-0xcfffffff] (base 0xc0000000) [ 0.193309] PCI: not using MMCONFIG [ 0.193492] PCI: Using configuration type 1 for base access [ 0.194802] Kprobes globally optimized [ 0.195006] ACPI: Added _OSI(Module Device) [ 0.195018] ACPI: Added _OSI(Processor Device) [ 0.195018] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.195032] ACPI: Added _OSI(Processor Aggregator Device) [ 0.195311] ACPI: Added _OSI(Linux-Dell-Video) [ 0.195541] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 0.195785] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) [ 0.236734] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.TXHC.RHUB.SS01._UPC], AE_ALREADY_EXISTS (20200925/dswload2-326) [ 0.237786] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200925/psobject-220) [ 0.238228] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014) [ 0.238607] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.TXHC.RHUB.SS01._PLD], AE_ALREADY_EXISTS (20200925/dswload2-326) [ 0.238785] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200925/psobject-220) [ 0.239225] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014) [ 0.239604] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.TXHC.RHUB.SS02._UPC], AE_ALREADY_EXISTS (20200925/dswload2-326) [ 0.240785] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200925/psobject-220) [ 0.241226] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014) [ 0.241604] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.TXHC.RHUB.SS02._PLD], AE_ALREADY_EXISTS (20200925/dswload2-326) [ 0.241785] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200925/psobject-220) [ 0.242226] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014) [ 0.242605] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.TXHC.RHUB.SS03._UPC], AE_ALREADY_EXISTS (20200925/dswload2-326) [ 0.243785] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200925/psobject-220) [ 0.244228] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014) [ 0.244607] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.TXHC.RHUB.SS03._PLD], AE_ALREADY_EXISTS (20200925/dswload2-326) [ 0.244785] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200925/psobject-220) [ 0.245226] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014) [ 0.245605] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.TXHC.RHUB.SS04._UPC], AE_ALREADY_EXISTS (20200925/dswload2-326) [ 0.246785] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200925/psobject-220) [ 0.247225] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014) [ 0.247604] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.TXHC.RHUB.SS04._PLD], AE_ALREADY_EXISTS (20200925/dswload2-326) [ 0.247785] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200925/psobject-220) [ 0.248226] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014) [ 0.248604] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS01._UPC], AE_ALREADY_EXISTS (20200925/dswload2-326) [ 0.249785] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200925/psobject-220) [ 0.250225] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014) [ 0.250604] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS01._PLD], AE_ALREADY_EXISTS (20200925/dswload2-326) [ 0.250785] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200925/psobject-220) [ 0.251226] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014) [ 0.251690] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS02._UPC], AE_ALREADY_EXISTS (20200925/dswload2-326) [ 0.252785] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200925/psobject-220) [ 0.253225] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014) [ 0.253604] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS02._PLD], AE_ALREADY_EXISTS (20200925/dswload2-326) [ 0.253785] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200925/psobject-220) [ 0.254226] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014) [ 0.254604] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS03._UPC], AE_ALREADY_EXISTS (20200925/dswload2-326) [ 0.255785] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200925/psobject-220) [ 0.256225] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014) [ 0.256604] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS03._PLD], AE_ALREADY_EXISTS (20200925/dswload2-326) [ 0.256785] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200925/psobject-220) [ 0.257226] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014) [ 0.257650] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS04._UPC], AE_ALREADY_EXISTS (20200925/dswload2-326) [ 0.258785] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200925/psobject-220) [ 0.259225] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014) [ 0.259603] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS04._PLD], AE_ALREADY_EXISTS (20200925/dswload2-326) [ 0.259785] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200925/psobject-220) [ 0.260226] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014) [ 0.260604] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS05._UPC], AE_ALREADY_EXISTS (20200925/dswload2-326) [ 0.260785] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200925/psobject-220) [ 0.261225] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014) [ 0.261604] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS05._PLD], AE_ALREADY_EXISTS (20200925/dswload2-326) [ 0.262785] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200925/psobject-220) [ 0.263226] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014) [ 0.263605] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS06._UPC], AE_ALREADY_EXISTS (20200925/dswload2-326) [ 0.263785] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200925/psobject-220) [ 0.264225] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014) [ 0.264603] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS06._PLD], AE_ALREADY_EXISTS (20200925/dswload2-326) [ 0.265785] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200925/psobject-220) [ 0.266225] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014) [ 0.266604] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS07._UPC], AE_ALREADY_EXISTS (20200925/dswload2-326) [ 0.266785] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200925/psobject-220) [ 0.267227] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014) [ 0.267604] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS07._PLD], AE_ALREADY_EXISTS (20200925/dswload2-326) [ 0.268785] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200925/psobject-220) [ 0.269225] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014) [ 0.269607] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS08._UPC], AE_ALREADY_EXISTS (20200925/dswload2-326) [ 0.269785] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200925/psobject-220) [ 0.270226] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014) [ 0.270607] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS08._PLD], AE_ALREADY_EXISTS (20200925/dswload2-326) [ 0.271785] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200925/psobject-220) [ 0.272225] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014) [ 0.272687] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS09._UPC], AE_ALREADY_EXISTS (20200925/dswload2-326) [ 0.272785] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200925/psobject-220) [ 0.273227] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014) [ 0.273605] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS09._PLD], AE_ALREADY_EXISTS (20200925/dswload2-326) [ 0.274785] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200925/psobject-220) [ 0.275225] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014) [ 0.275687] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS10._UPC], AE_ALREADY_EXISTS (20200925/dswload2-326) [ 0.275785] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200925/psobject-220) [ 0.276226] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014) [ 0.276603] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS10._PLD], AE_ALREADY_EXISTS (20200925/dswload2-326) [ 0.277785] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200925/psobject-220) [ 0.278226] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014) [ 0.278689] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.SS01._UPC], AE_ALREADY_EXISTS (20200925/dswload2-326) [ 0.278785] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200925/psobject-220) [ 0.279226] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014) [ 0.279604] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.SS01._PLD], AE_ALREADY_EXISTS (20200925/dswload2-326) [ 0.280785] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200925/psobject-220) [ 0.281225] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014) [ 0.281605] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.SS02._UPC], AE_ALREADY_EXISTS (20200925/dswload2-326) [ 0.281785] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200925/psobject-220) [ 0.282226] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014) [ 0.282605] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.SS02._PLD], AE_ALREADY_EXISTS (20200925/dswload2-326) [ 0.283785] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200925/psobject-220) [ 0.284226] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014) [ 0.284605] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.SS03._UPC], AE_ALREADY_EXISTS (20200925/dswload2-326) [ 0.284785] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200925/psobject-220) [ 0.285226] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014) [ 0.285603] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.SS03._PLD], AE_ALREADY_EXISTS (20200925/dswload2-326) [ 0.286785] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200925/psobject-220) [ 0.287226] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014) [ 0.287605] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.SS04._UPC], AE_ALREADY_EXISTS (20200925/dswload2-326) [ 0.287785] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200925/psobject-220) [ 0.288227] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014) [ 0.288606] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.SS04._PLD], AE_ALREADY_EXISTS (20200925/dswload2-326) [ 0.288785] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200925/psobject-220) [ 0.289226] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014) [ 0.289604] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.SS05._UPC], AE_ALREADY_EXISTS (20200925/dswload2-326) [ 0.290785] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200925/psobject-220) [ 0.291226] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014) [ 0.291604] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.SS05._PLD], AE_ALREADY_EXISTS (20200925/dswload2-326) [ 0.291785] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200925/psobject-220) [ 0.292225] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014) [ 0.292604] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.SS06._UPC], AE_ALREADY_EXISTS (20200925/dswload2-326) [ 0.293785] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200925/psobject-220) [ 0.294226] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014) [ 0.294604] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.SS06._PLD], AE_ALREADY_EXISTS (20200925/dswload2-326) [ 0.294785] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200925/psobject-220) [ 0.295228] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014) [ 0.296179] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PC00.I2C0.TPD0], AE_NOT_FOUND (20200925/dswload2-162) [ 0.296741] ACPI Error: AE_NOT_FOUND, During name lookup/catalog (20200925/psobject-220) [ 0.297785] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0010) [ 0.298175] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PC00.I2C0.TPL1], AE_NOT_FOUND (20200925/dswload2-162) [ 0.298738] ACPI Error: AE_NOT_FOUND, During name lookup/catalog (20200925/psobject-220) [ 0.298785] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0010) [ 0.299590] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0], AE_NOT_FOUND (20200925/dswload2-162) [ 0.299785] ACPI Error: AE_NOT_FOUND, During name lookup/catalog (20200925/psobject-220) [ 0.300205] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0010) [ 0.300788] ACPI: 19 ACPI AML tables successfully acquired and loaded [ 0.301697] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - ^SPI1.SPFD.CVFD (20200925/dspkginit-438) [ 0.302787] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - ^SPI1.SPFD.CVFD (20200925/dspkginit-438) [ 0.303394] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - ^XHCI.RHUB.HS04.VI2C (20200925/dspkginit-438) [ 0.303793] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - ^XHCI.RHUB.HS04.VI2C (20200925/dspkginit-438) [ 0.309803] ACPI: Dynamic OEM Table Load: [ 0.310026] ACPI: SSDT 0xFFFF88810104B000 0001C6 (v02 PmRef Cpu0Psd 00003000 INTL 20160422) [ 0.311210] ACPI: \_SB_.PR00: _OSC native thermal LVT Acked [ 0.313331] ACPI: Dynamic OEM Table Load: [ 0.313551] ACPI: SSDT 0xFFFF888101542C00 000386 (v02 PmRef Cpu0Cst 00003001 INTL 20160422) [ 0.314721] ACPI: Dynamic OEM Table Load: [ 0.314789] ACPI: SSDT 0xFFFF888100CCD000 0005C3 (v02 PmRef Cpu0Ist 00003000 INTL 20160422) [ 0.316203] ACPI: Dynamic OEM Table Load: [ 0.316422] ACPI: SSDT 0xFFFF888101543000 00028B (v02 PmRef Cpu0Hwp 00003000 INTL 20160422) [ 0.317806] ACPI: Dynamic OEM Table Load: [ 0.318028] ACPI: SSDT 0xFFFF8881010E4000 0008E7 (v02 PmRef ApIst 00003000 INTL 20160422) [ 0.319482] ACPI: Dynamic OEM Table Load: [ 0.319697] ACPI: SSDT 0xFFFF888100CCE800 00048A (v02 PmRef ApHwp 00003000 INTL 20160422) [ 0.321753] ACPI: Dynamic OEM Table Load: [ 0.321789] ACPI: SSDT 0xFFFF888100CCF000 0004D4 (v02 PmRef ApPsd 00003000 INTL 20160422) [ 0.323193] ACPI: Dynamic OEM Table Load: [ 0.323413] ACPI: SSDT 0xFFFF888100CCF800 00048A (v02 PmRef ApCst 00003000 INTL 20160422) [ 0.327502] ACPI: EC: EC started [ 0.327678] ACPI: EC: interrupt blocked [ 0.328164] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.328428] ACPI: \_SB_.PC00.LPCB.EC0_: Boot DSDT EC used to handle transactions [ 0.328785] ACPI: Interpreter enabled [ 0.328986] ACPI: (supports S0 S4 S5) [ 0.329179] ACPI: Using IOAPIC for interrupt routing [ 0.329462] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xc0000000-0xcfffffff] (base 0xc0000000) [ 0.332261] PCI: MMCONFIG at [mem 0xc0000000-0xcfffffff] reserved in ACPI motherboard resources [ 0.332728] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.335432] ACPI: Enabled 7 GPEs in block 00 to 7F [ 0.338715] ACPI: Power Resource [BTPR] (on) [ 0.339406] ACPI: Power Resource [PAUD] (on) [ 0.345820] ACPI: Power Resource [V0PR] (on) [ 0.346129] ACPI: Power Resource [V1PR] (on) [ 0.346427] ACPI: Power Resource [V2PR] (on) [ 0.348250] ACPI: Power Resource [PXTC] (on) [ 0.348666] ACPI: Power Resource [PTPL] (on) [ 0.349149] ACPI: Power Resource [PXTC] (on) [ 0.349814] ACPI: Power Resource [PXTC] (on) [ 0.351989] ACPI: Power Resource [WRST] (on) [ 0.357430] ACPI: Power Resource [TBT0] (on) [ 0.357791] ACPI: Power Resource [TBT1] (on) [ 0.357816] ACPI: Power Resource [D3C] (on) [ 0.473844] ACPI: Power Resource [FN00] (off) [ 0.474231] ACPI: Power Resource [FN01] (off) [ 0.474804] ACPI: Power Resource [FN02] (off) [ 0.474892] ACPI: Power Resource [FN03] (off) [ 0.475242] ACPI: Power Resource [FN04] (off) [ 0.476805] ACPI: Power Resource [PIN] (off) [ 0.477213] ACPI: PCI Root Bridge [PC00] (domain 0000 [bus 00-fe]) [ 0.477578] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.480612] acpi PNP0A08:00: _OSC: platform does not support [AER] [ 0.484019] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME PCIeCapability LTR] [ 0.486076] PCI host bridge to bus 0000:00 [ 0.486293] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.486651] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.486785] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.487181] pci_bus 0000:00: root bus resource [mem 0x50400000-0xbfffffff window] [ 0.487567] pci_bus 0000:00: root bus resource [mem 0x4000000000-0x7fffffffff window] [ 0.487785] pci_bus 0000:00: root bus resource [bus 00-fe] [ 0.488095] pci 0000:00:00.0: [8086:9a14] type 00 class 0x060000 [ 0.489794] pci 0000:00:02.0: [8086:9a49] type 00 class 0x030000 [ 0.489794] pci 0000:00:02.0: reg 0x10: [mem 0x601c000000-0x601cffffff 64bit] [ 0.489794] pci 0000:00:02.0: reg 0x18: [mem 0x4000000000-0x400fffffff 64bit pref] [ 0.490182] pci 0000:00:02.0: reg 0x20: [io 0x4000-0x403f] [ 0.490483] pci 0000:00:02.0: DMAR: Skip IOMMU disabling for graphics [ 0.490809] pci 0000:00:02.0: reg 0x344: [mem 0x00000000-0x00ffffff 64bit] [ 0.491167] pci 0000:00:02.0: VF(n) BAR0 space: [mem 0x00000000-0x06ffffff 64bit] (contains BAR0 for 7 VFs) [ 0.491673] pci 0000:00:02.0: reg 0x34c: [mem 0x00000000-0x1fffffff 64bit pref] [ 0.492785] pci 0000:00:02.0: VF(n) BAR2 space: [mem 0x00000000-0xdfffffff 64bit pref] (contains BAR2 for 7 VFs) [ 0.493927] pci 0000:00:04.0: [8086:9a03] type 00 class 0x118000 [ 0.494257] pci 0000:00:04.0: reg 0x10: [mem 0x601d140000-0x601d15ffff 64bit] [ 0.495309] pci 0000:00:06.0: [8086:9a09] type 01 class 0x060400 [ 0.495688] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold [ 0.496454] pci 0000:00:07.0: [8086:9a23] type 01 class 0x060400 [ 0.497384] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold [ 0.497724] pci 0000:00:07.0: DPC: RP PIO log size 0 is invalid [ 0.497911] pci 0000:00:0d.0: [8086:9a13] type 00 class 0x0c0330 [ 0.498239] pci 0000:00:0d.0: reg 0x10: [mem 0x601d160000-0x601d16ffff 64bit] [ 0.498666] pci 0000:00:0d.0: PME# supported from D3hot D3cold [ 0.499417] pci 0000:00:0d.2: [8086:9a1b] type 00 class 0x0c0340 [ 0.499745] pci 0000:00:0d.2: reg 0x10: [mem 0x601d100000-0x601d13ffff 64bit] [ 0.500792] pci 0000:00:0d.2: reg 0x18: [mem 0x601d181000-0x601d181fff 64bit] [ 0.501203] pci 0000:00:0d.2: supports D1 D2 [ 0.501427] pci 0000:00:0d.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.502413] pci 0000:00:14.0: [8086:a0ed] type 00 class 0x0c0330 [ 0.502746] pci 0000:00:14.0: reg 0x10: [mem 0x5e500000-0x5e50ffff 64bit] [ 0.502873] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.503819] pci 0000:00:14.2: [8086:a0ef] type 00 class 0x050000 [ 0.504152] pci 0000:00:14.2: reg 0x10: [mem 0x601d178000-0x601d17bfff 64bit] [ 0.504535] pci 0000:00:14.2: reg 0x18: [mem 0x601d180000-0x601d180fff 64bit] [ 0.505453] pci 0000:00:14.3: [8086:a0f0] type 00 class 0x028000 [ 0.505807] pci 0000:00:14.3: reg 0x10: [mem 0x601d174000-0x601d177fff 64bit] [ 0.506330] pci 0000:00:14.3: PME# supported from D0 D3hot D3cold [ 0.507343] pci 0000:00:15.0: [8086:a0e8] type 00 class 0x0c8000 [ 0.507723] pci 0000:00:15.0: reg 0x10: [mem 0x4010000000-0x4010000fff 64bit] [ 0.508805] pci 0000:00:15.3: [8086:a0eb] type 00 class 0x0c8000 [ 0.508898] pci 0000:00:15.3: reg 0x10: [mem 0x4010001000-0x4010001fff 64bit] [ 0.510065] pci 0000:00:16.0: [8086:a0e0] type 00 class 0x078000 [ 0.510405] pci 0000:00:16.0: reg 0x10: [mem 0x601d17d000-0x601d17dfff 64bit] [ 0.510861] pci 0000:00:16.0: PME# supported from D3hot [ 0.511789] pci 0000:00:17.0: [8086:a0d3] type 00 class 0x010601 [ 0.512121] pci 0000:00:17.0: reg 0x10: [mem 0x5e510000-0x5e511fff] [ 0.512453] pci 0000:00:17.0: reg 0x14: [mem 0x5e514000-0x5e5140ff] [ 0.512787] pci 0000:00:17.0: reg 0x18: [io 0x4080-0x4087] [ 0.513083] pci 0000:00:17.0: reg 0x1c: [io 0x4088-0x408b] [ 0.513380] pci 0000:00:17.0: reg 0x20: [io 0x4060-0x407f] [ 0.513675] pci 0000:00:17.0: reg 0x24: [mem 0x5e513000-0x5e5137ff] [ 0.514833] pci 0000:00:17.0: PME# supported from D3hot [ 0.515797] pci 0000:00:1d.0: [8086:a0b0] type 01 class 0x060400 [ 0.515884] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.516859] pci 0000:00:1d.1: [8086:a0b1] type 01 class 0x060400 [ 0.517275] pci 0000:00:1d.1: PME# supported from D0 D3hot D3cold [ 0.518280] pci 0000:00:1f.0: [8086:a082] type 00 class 0x060100 [ 0.519318] pci 0000:00:1f.3: [8086:a0c8] type 00 class 0x040100 [ 0.519669] pci 0000:00:1f.3: reg 0x10: [mem 0x601d170000-0x601d173fff 64bit] [ 0.519839] pci 0000:00:1f.3: reg 0x20: [mem 0x601d000000-0x601d0fffff 64bit] [ 0.520313] pci 0000:00:1f.3: PME# supported from D3hot D3cold [ 0.521268] pci 0000:00:1f.4: [8086:a0a3] type 00 class 0x0c0500 [ 0.521605] pci 0000:00:1f.4: reg 0x10: [mem 0x601d17c000-0x601d17c0ff 64bit] [ 0.521814] pci 0000:00:1f.4: reg 0x20: [io 0xefa0-0xefbf] [ 0.522788] pci 0000:00:1f.5: [8086:a0a4] type 00 class 0x0c8000 [ 0.523803] pci 0000:00:1f.5: reg 0x10: [mem 0x50400000-0x50400fff] [ 0.524813] pci 0000:01:00.0: [144d:a809] type 00 class 0x010802 [ 0.525141] pci 0000:01:00.0: reg 0x10: [mem 0x5e400000-0x5e403fff 64bit] [ 0.525685] pci 0000:00:06.0: PCI bridge to [bus 01] [ 0.525787] pci 0000:00:06.0: bridge window [mem 0x5e400000-0x5e4fffff] [ 0.526170] pci 0000:00:07.0: PCI bridge to [bus 02-2b] [ 0.526446] pci 0000:00:07.0: bridge window [io 0x5000-0x5fff] [ 0.526762] pci 0000:00:07.0: bridge window [mem 0x52000000-0x5e1fffff] [ 0.526789] pci 0000:00:07.0: bridge window [mem 0x6000000000-0x601bffffff 64bit pref] [ 0.527272] pci 0000:2c:00.0: [10ec:8168] type 00 class 0x020000 [ 0.527604] pci 0000:2c:00.0: reg 0x10: [io 0x3000-0x30ff] [ 0.527815] pci 0000:2c:00.0: reg 0x18: [mem 0x5e304000-0x5e304fff 64bit] [ 0.528183] pci 0000:2c:00.0: reg 0x20: [mem 0x5e300000-0x5e303fff 64bit] [ 0.528655] pci 0000:2c:00.0: supports D1 D2 [ 0.528785] pci 0000:2c:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.529797] pci 0000:00:1d.0: PCI bridge to [bus 2c] [ 0.529797] pci 0000:00:1d.0: bridge window [io 0x3000-0x3fff] [ 0.529797] pci 0000:00:1d.0: bridge window [mem 0x5e300000-0x5e3fffff] [ 0.531816] pci 0000:2d:00.0: [1217:8621] type 00 class 0x080501 [ 0.532152] pci 0000:2d:00.0: reg 0x10: [mem 0x5e201000-0x5e201fff] [ 0.532484] pci 0000:2d:00.0: reg 0x14: [mem 0x5e200000-0x5e2007ff] [ 0.533925] pci 0000:2d:00.0: PME# supported from D3hot D3cold [ 0.537839] pci 0000:00:1d.1: PCI bridge to [bus 2d] [ 0.538105] pci 0000:00:1d.1: bridge window [mem 0x5e200000-0x5e2fffff] [ 0.541824] ACPI: EC: interrupt unblocked [ 0.541824] ACPI: EC: event unblocked [ 0.541990] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.542251] ACPI: EC: GPE=0x6e [ 0.542409] ACPI: \_SB_.PC00.LPCB.EC0_: Boot DSDT EC initialization complete [ 0.542773] ACPI: \_SB_.PC00.LPCB.EC0_: EC: Used to handle transactions and events [ 0.543842] iommu: Default domain type: Passthrough (set via kernel command line) [ 0.544238] pci 0000:00:02.0: vgaarb: setting as boot VGA device [ 0.544238] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.544788] pci 0000:00:02.0: vgaarb: bridge control possible [ 0.545084] vgaarb: loaded [ 0.545259] SCSI subsystem initialized [ 0.545793] libata version 3.00 loaded. [ 0.546007] pps_core: LinuxPPS API ver. 1 registered [ 0.546007] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> [ 0.546261] PTP clock support registered [ 0.546813] EDAC MC: Ver: 3.0.0 [ 0.546958] PCI: Using ACPI for IRQ routing [ 0.567450] PCI: pci_cache_line_size set to 64 bytes [ 0.567947] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff] [ 0.568259] e820: reserve RAM buffer [mem 0x39f99000-0x3bffffff] [ 0.568571] e820: reserve RAM buffer [mem 0x434af000-0x43ffffff] [ 0.568785] e820: reserve RAM buffer [mem 0x45c00000-0x47ffffff] [ 0.569097] e820: reserve RAM buffer [mem 0x4afc00000-0x4afffffff] [ 0.569797] clocksource: Switched to clocksource tsc-early [ 0.576870] VFS: Disk quotas dquot_6.6.0 [ 0.577090] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.577494] AppArmor: AppArmor Filesystem Enabled [ 0.577766] pnp: PnP ACPI init [ 0.578061] system 00:00: [io 0x0700-0x073f] has been reserved [ 0.578371] system 00:00: [io 0x164e-0x164f] has been reserved [ 0.578684] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.579065] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.579462] system 00:02: [io 0x1854-0x1857] has been reserved [ 0.579776] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.580187] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.580936] pnp 00:04: disabling [mem 0xc0000000-0xcfffffff] because it overlaps 0000:00:02.0 BAR 9 [mem 0x00000000-0xdfffffff 64bit pref] [ 0.581600] system 00:04: [mem 0xfedc0000-0xfedc7fff] has been reserved [ 0.581949] system 00:04: [mem 0xfeda0000-0xfeda0fff] has been reserved [ 0.582293] system 00:04: [mem 0xfeda1000-0xfeda1fff] has been reserved [ 0.582637] system 00:04: [mem 0xfed20000-0xfed7ffff] could not be reserved [ 0.583002] system 00:04: [mem 0xfed90000-0xfed93fff] could not be reserved [ 0.583364] system 00:04: [mem 0xfed45000-0xfed8ffff] could not be reserved [ 0.583725] system 00:04: [mem 0xfe0b0000-0xfe0b0fff] has been reserved [ 0.584072] system 00:04: [mem 0xfee00000-0xfeefffff] has been reserved [ 0.584420] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.585326] system 00:05: [io 0x1800-0x18fe] could not be reserved [ 0.585656] system 00:05: [mem 0xfe000000-0xfe01ffff] could not be reserved [ 0.586020] system 00:05: [mem 0xfe04c000-0xfe04ffff] has been reserved [ 0.586366] system 00:05: [mem 0xfe050000-0xfe0affff] has been reserved [ 0.586709] system 00:05: [mem 0xfe0d0000-0xfe0fffff] has been reserved [ 0.587055] system 00:05: [mem 0xfe200000-0xfe7fffff] has been reserved [ 0.587399] system 00:05: [mem 0xff000000-0xffffffff] has been reserved [ 0.587743] system 00:05: [mem 0xfd000000-0xfd68ffff] has been reserved [ 0.588089] system 00:05: [mem 0xfd6b0000-0xfd6cffff] has been reserved [ 0.588433] system 00:05: [mem 0xfd6f0000-0xfdffffff] has been reserved [ 0.588781] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.589298] system 00:06: [io 0x2000-0x20fe] has been reserved [ 0.589611] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.590080] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.590557] pnp: PnP ACPI: found 8 devices [ 0.596053] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.596547] NET: Registered protocol family 2 [ 0.596933] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.598344] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear) [ 0.598817] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.599328] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.599800] TCP: Hash tables configured (established 131072 bind 65536) [ 0.600162] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear) [ 0.600536] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear) [ 0.600953] NET: Registered protocol family 1 [ 0.601192] pci 0000:00:02.0: BAR 9: assigned [mem 0x4020000000-0x40ffffffff 64bit pref] [ 0.601616] pci 0000:00:02.0: BAR 7: assigned [mem 0x4011000000-0x4017ffffff 64bit] [ 0.602014] pci 0000:00:06.0: PCI bridge to [bus 01] [ 0.602272] pci 0000:00:06.0: bridge window [mem 0x5e400000-0x5e4fffff] [ 0.602625] pci 0000:00:07.0: PCI bridge to [bus 02-2b] [ 0.602897] pci 0000:00:07.0: bridge window [io 0x5000-0x5fff] [ 0.603215] pci 0000:00:07.0: bridge window [mem 0x52000000-0x5e1fffff] [ 0.603567] pci 0000:00:07.0: bridge window [mem 0x6000000000-0x601bffffff 64bit pref] [ 0.603990] pci 0000:00:1d.0: PCI bridge to [bus 2c] [ 0.604248] pci 0000:00:1d.0: bridge window [io 0x3000-0x3fff] [ 0.604565] pci 0000:00:1d.0: bridge window [mem 0x5e300000-0x5e3fffff] [ 0.604923] pci 0000:00:1d.1: PCI bridge to [bus 2d] [ 0.605184] pci 0000:00:1d.1: bridge window [mem 0x5e200000-0x5e2fffff] [ 0.605540] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.605861] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.606181] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.606536] pci_bus 0000:00: resource 7 [mem 0x50400000-0xbfffffff window] [ 0.606893] pci_bus 0000:00: resource 8 [mem 0x4000000000-0x7fffffffff window] [ 0.607265] pci_bus 0000:01: resource 1 [mem 0x5e400000-0x5e4fffff] [ 0.607589] pci_bus 0000:02: resource 0 [io 0x5000-0x5fff] [ 0.607878] pci_bus 0000:02: resource 1 [mem 0x52000000-0x5e1fffff] [ 0.608201] pci_bus 0000:02: resource 2 [mem 0x6000000000-0x601bffffff 64bit pref] [ 0.608593] pci_bus 0000:2c: resource 0 [io 0x3000-0x3fff] [ 0.608881] pci_bus 0000:2c: resource 1 [mem 0x5e300000-0x5e3fffff] [ 0.609208] pci_bus 0000:2d: resource 1 [mem 0x5e200000-0x5e2fffff] [ 0.609624] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.610406] PCI: CLS 64 bytes, default 64 [ 1.445477] Trying to unpack rootfs image as initramfs... [ 1.464216] Freeing initrd memory: 73260K [ 1.464454] DMAR: No ATSR found [ 1.464652] DMAR: dmar1: Using Queued invalidation [ 1.464907] DMAR: dmar0: Using Queued invalidation [ 1.465155] DMAR: Translation was enabled for dmar0 but we are not in kdump mode [ 1.465537] DMAR: dmar2: Using Queued invalidation [ 1.465925] pci 0000:00:00.0: Adding to iommu group 0 [ 1.466193] pci 0000:00:02.0: Adding to iommu group 1 [ 1.466459] pci 0000:00:04.0: Adding to iommu group 2 [ 1.466727] pci 0000:00:06.0: Adding to iommu group 3 [ 1.467004] pci 0000:00:07.0: Adding to iommu group 4 [ 1.467273] pci 0000:00:0d.0: Adding to iommu group 5 [ 1.467545] pci 0000:00:0d.2: Adding to iommu group 5 [ 1.467816] pci 0000:00:14.0: Adding to iommu group 6 [ 1.468088] pci 0000:00:14.2: Adding to iommu group 6 [ 1.468353] pci 0000:00:14.3: Adding to iommu group 7 [ 1.468622] pci 0000:00:15.0: Adding to iommu group 8 [ 1.468896] pci 0000:00:15.3: Adding to iommu group 8 [ 1.469164] pci 0000:00:16.0: Adding to iommu group 9 [ 1.469430] pci 0000:00:17.0: Adding to iommu group 10 [ 1.469701] pci 0000:00:1d.0: Adding to iommu group 11 [ 1.469975] pci 0000:00:1d.1: Adding to iommu group 12 [ 1.470251] pci 0000:00:1f.0: Adding to iommu group 13 [ 1.470526] pci 0000:00:1f.3: Adding to iommu group 13 [ 1.470798] pci 0000:00:1f.4: Adding to iommu group 13 [ 1.471068] pci 0000:00:1f.5: Adding to iommu group 13 [ 1.471338] pci 0000:01:00.0: Adding to iommu group 14 [ 1.471609] pci 0000:2c:00.0: Adding to iommu group 15 [ 1.471882] pci 0000:2d:00.0: Adding to iommu group 16 [ 1.472172] DMAR: Intel(R) Virtualization Technology for Directed I/O [ 1.472507] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 1.472842] software IO TLB: mapped [mem 0x000000003f4af000-0x00000000434af000] (64MB) [ 1.473297] resource sanity check: requesting [mem 0xfedc0000-0xfedcdfff], which spans more than pnp 00:04 [mem 0xfedc0000-0xfedc7fff] [ 1.473937] caller tgl_uncore_imc_freerunning_init_box+0xa2/0xe0 mapping multiple BARs [ 1.474455] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x22df1149949, max_idle_ns: 440795312789 ns [ 1.474993] clocksource: Switched to clocksource tsc [ 1.476123] Initialise system trusted keyrings [ 1.478759] workingset: timestamp_bits=40 max_order=22 bucket_order=0 [ 1.480602] Key type asymmetric registered [ 1.480839] Asymmetric key parser 'x509' registered [ 1.481128] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 1.481533] io scheduler mq-deadline registered [ 1.481782] io scheduler kyber registered [ 1.482039] io scheduler bfq registered [ 1.482664] pcieport 0000:00:06.0: PME: Signaling with IRQ 123 [ 1.483221] pcieport 0000:00:07.0: PME: Signaling with IRQ 124 [ 1.483560] pcieport 0000:00:07.0: pciehp: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+ [ 1.486550] pcieport 0000:00:1d.0: PME: Signaling with IRQ 125 [ 1.487161] pcieport 0000:00:1d.1: PME: Signaling with IRQ 126 [ 1.487851] Monitor-Mwait will be used to enter C-1 state [ 1.488156] Monitor-Mwait will be used to enter C-2 state [ 1.488718] Monitor-Mwait will be used to enter C-3 state [ 1.489038] ACPI: \_SB_.PR00: Found 3 idle states [ 1.489534] ACPI: \_SB_.PR01: Found 3 idle states [ 1.490000] ACPI: \_SB_.PR02: Found 3 idle states [ 1.490421] ACPI: \_SB_.PR03: Found 3 idle states [ 1.490851] ACPI: \_SB_.PR04: Found 3 idle states [ 1.491282] ACPI: \_SB_.PR05: Found 3 idle states [ 1.491694] ACPI: \_SB_.PR06: Found 3 idle states [ 1.492141] ACPI: \_SB_.PR07: Found 3 idle states [ 1.501417] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 1.502049] AMD-Vi: AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de> [ 1.502417] AMD-Vi: AMD IOMMUv2 functionality not available on this system [ 1.513099] brd: module loaded [ 1.513306] Loading iSCSI transport class v2.0-870. [ 1.558422] rdac: device handler registered [ 1.679081] nvme nvme0: pci function 0000:01:00.0 [ 1.679365] i2c /dev entries driver [ 1.679582] ahci 0000:00:17.0: version 3.0 [ 1.680066] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl SATA mode [ 1.680508] ahci 0000:00:17.0: flags: 64bit ncq sntf pm clo only pio slum part deso sadm sds [ 1.681022] Cannot find slot node of this ata_port. [ 1.686496] scsi host0: ahci [ 1.686734] ata1 : SATA max UDMA/133 abar m2048@0x5e513000 port 0x5e513100 irq 127 [ 1.687525] NET: Registered protocol family 17 [ 1.687780] Key type dns_resolver registered [ 1.688666] IPI shorthand broadcast: enabled [ 1.688930] sched_clock: Marking stable (1682885186, 6019632)->(1694020852, -5116034) [ 1.689466] registered taskstats version 1 [ 1.689691] Loading compiled-in X.509 certificates [ 1.690024] Loaded X.509 cert 'Synology SDG kernel module signing key: 7bd0b0d6bcd31651c22ce3978bdc8c8bdc417329' [ 1.693171] redpill: loading out-of-tree module taints kernel. [ 1.693533] redpill: module verification failed: signature and/or required key missing - tainting kernel [ 1.702800] nvme nvme0: Shutdown timeout set to 8 seconds [ 1.708897] nvme nvme0: allocated 64 MiB host memory buffer. [ 1.735154] serial8250: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 1.735586] printk: console [ttyS0] enabled [ 1.736039] printk: bootconsole [uart8250] disabled [ 1.739894] Loaded X.509 cert 'Synology Root Certification Authority: f2c075361f168425f8b5ef31b796406c3aab2089' [ 1.740456] Loaded X.509 cert 'Synology Kernel Module Signing Certification Authority: 600839b5d127e0e11d817a31f0575d323a7c0e28' [ 1.741096] Loaded X.509 cert 'Synology kernel module signing key: 4646ce54489669338118a3b1286da156ac366fa5' [ 1.741628] page_owner is disabled [ 1.741828] AppArmor: AppArmor sha1 policy hashing enabled [ 1.755505] nvme nvme0: 8/0/0 default/read/poll queues [ 1.762546] nvme0n1: p1 p2 p3 [ 1.999844] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 2.004852] ata1.00: ATA-9: CT240BX500SSD1, M6CR013, max UDMA/133 [ 2.005236] ata1.00: 468862128 sectors, multi 1: LBA48 NCQ (depth 32), AA [ 2.005639] ata1.00: SN:1901E16A7E62 [ 2.015964] ata1.00: configured for UDMA/133 [ 2.016240] Invalid parameter [ 2.016510] ata1.00: Find SSD disks. [CT240BX500SSD1] [ 2.018428] scsi 0:0:0:0: Direct-Access ATA CT240BX500SSD1 R013 PQ: 0 ANSI: 5 [ 2.019258] sd 0:0:0:0: got sata disk[0] [ 2.019606] ata1.00: Enabling discard_zeroes_data [ 2.020001] sd 0:0:0:0: [sata1] 468862128 512-byte logical blocks: (240 GB/224 GiB) [ 2.020500] sd 0:0:0:0: [sata1] Write Protect is off [ 2.020833] sd 0:0:0:0: [sata1] Mode Sense: 00 3a 00 10 [ 2.021200] sd 0:0:0:0: [sata1] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 2.022015] ata1.00: Enabling discard_zeroes_data [ 2.022605] sata1: p1 p2 [ 2.023255] ata1.00: Enabling discard_zeroes_data [ 2.023686] sd 0:0:0:0: [sata1] Attached SCSI disk [ 2.042257] Freeing unused kernel image (initmem) memory: 1344K [ 2.055028] Write protecting the kernel read-only data: 18432k [ 2.056033] Freeing unused kernel image (text/rodata gap) memory: 2036K [ 2.056621] Freeing unused kernel image (rodata/data gap) memory: 344K [ 2.057023] rodata_test: all tests were successful [ 2.057323] Run /init as init process [ 2.057549] with arguments: [ 2.057730] /init [ 2.057875] withefi [ 2.058027] DiskIdxMap [ 2.058195] sataboot2 [ 2.058360] SataPortMap [ 2.058533] with environment: [ 2.058727] HOME=/ [ 2.058878] TERM=linux [ 2.059049] pid=0x5583 [ 2.059217] syno_port_thaw=1 [ 2.059413] SasIdxMap=0 [ 2.059585] vid=0x0781 [ 2.059752] HddHotplug=0 [ 2.059930] syno_hdd_detect=0 [ 2.060132] syno_hdd_powerup_seq=0 [ 2.527798] random: crng init done [ 2.565124] ACPI: bus type USB registered [ 2.565370] usbcore: registered new interface driver usbfs [ 2.565671] usbcore: registered new interface driver hub [ 2.565972] usbcore: registered new device driver usb [ 2.577805] xhci_hcd 0000:00:0d.0: xHCI Host Controller [ 2.578099] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 1 [ 2.579560] xhci_hcd 0000:00:0d.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009010 [ 2.580076] xhci_hcd 0000:00:0d.0: cache line size of 64 is not supported [ 2.580704] hub 1-0:1.0: USB hub found [ 2.580920] hub 1-0:1.0: 1 port detected [ 2.581313] xhci_hcd 0000:00:0d.0: xHCI Host Controller [ 2.581616] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 2 [ 2.582031] xhci_hcd 0000:00:0d.0: Host supports USB 3.1 Enhanced SuperSpeed [ 2.582437] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 2.583163] hub 2-0:1.0: USB hub found [ 2.583391] hub 2-0:1.0: 4 ports detected [ 2.583952] usb: port power management may be unreliable [ 2.584520] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 2.584822] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 2.586342] xhci_hcd 0000:00:14.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000000009010 [ 2.586853] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 2.587488] hub 3-0:1.0: USB hub found [ 2.587712] hub 3-0:1.0: 12 ports detected [ 2.588745] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 2.589053] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 [ 2.589472] xhci_hcd 0000:00:14.0: Host supports USB 3.1 Enhanced SuperSpeed [ 2.589911] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. [ 2.590471] hub 4-0:1.0: USB hub found [ 2.590704] hub 4-0:1.0: 4 ports detected [ 2.847901] usb 3-5: new high-speed USB device number 2 using xhci_hcd [ 3.025067] usb 3-5: not running at top speed [ 3.432972] usb 3-5: new high-speed USB device number 2 using xhci_hcd [ 3.581250] usb 3-5: not running at top speed [ 3.829502] r8168 Gigabit Ethernet driver 8.052.01-NAPI loaded [ 3.846121] r8168: This product is covered by one or more of the following patents: US6,570,884, US6,115,776, and US6,327,625. [ 3.848763] r8168 Copyright (C) 2023 Realtek NIC software team <nicfae@realtek.com> This program comes with ABSOLUTELY NO WARRANTY; for details, please see <http://www.gnu.org/licenses/>. This is free software, and you are welcome to redistribute it under certain conditions; see <http://www.gnu.org/licenses/>. [ 3.989085] usb 3-5: new high-speed USB device number 2 using xhci_hcd [ 4.137251] usb 3-5: not running at top speed [ 4.545080] usb 3-5: new high-speed USB device number 2 using xhci_hcd [ 4.693239] usb 3-5: not running at top speed [ 5.058902] synobios open /dev/ttyS1 success [ 5.059142] Fail to get disk 1 led type [ 5.059351] Fail to get disk 2 led type [ 5.059558] Fail to get disk 3 led type [ 5.059765] Fail to get disk 4 led type [ 5.059979] Fail to get disk 5 led type [ 5.060187] Fail to get disk 6 led type [ 5.060395] Fail to get disk 7 led type [ 5.060602] Fail to get disk 8 led type [ 5.060810] Fail to get disk 9 led type [ 5.061022] Fail to get disk 10 led type [ 5.061233] Fail to get disk 11 led type [ 5.061445] Fail to get disk 12 led type [ 5.061854] 2023-11-23 1:48:40 UTC [ 5.062044] synobios: load, major number 201 [ 5.062274] Brand: Synology [ 5.062427] Model: SA-6400 [ 5.062577] synobios cpu_arch proc entry initialized [ 5.062847] synobios crypto_hw proc entry initialized [ 5.063118] synobios syno_platform proc entry initialized [ 5.066157] Module [epyc7002_synobios] is removed. [ 5.066434] synobios: unload [ 5.100894] usb 3-5: new high-speed USB device number 2 using xhci_hcd [ 5.250106] usb 3-5: not running at top speed [ 5.658084] usb 3-5: new high-speed USB device number 2 using xhci_hcd [ 5.806273] usb 3-5: not running at top speed [ 5.945946] usb 3-7: new high-speed USB device number 3 using xhci_hcd [ 6.107229] Got empty serial number. Generate serial number from product. [ 6.245939] usb 3-9: new full-speed USB device number 4 using xhci_hcd [ 6.398176] Got empty serial number. Generate serial number from product. [ 6.536938] usb 3-10: new full-speed USB device number 5 using xhci_hcd [ 6.686861] Got empty serial number. Generate serial number from product. [ 15.357224] md: md0 stopped. [ 15.358931] md/raid1:md0: active with 1 out of 4 mirrors [ 15.360400] md0: detected capacity change from 0 to 8589869056 [ 15.425438] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null) [ 15.448709] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: prjquota,rootprjquota,barrier=1 [ 15.452111] eth0: 0xffffc90000111000, 7c:8a:e1:8e:92:57, IRQ 139 [ 17.375183] Module [r8168] is removed. [ 17.419172] Module [pgdrv] is removed. [ 18.211257] md: md1 stopped. [ 18.212249] md/raid1:md1: active with 1 out of 4 mirrors [ 18.212902] md1: detected capacity change from 0 to 2147418112 [ 18.227952] Adding 2097084k swap on /dev/md1. Priority:-2 extents:1 across:2097084k [ 35.371479] md1: detected capacity change from 2147418112 to 0 [ 35.371805] md: md1: set sata1p2 to syno_auto_remap [0] [ 35.372088] md: md1 stopped. [ 35.434723] synobios open /dev/ttyS1 success [ 35.434966] Fail to get disk 1 led type [ 35.435173] Fail to get disk 2 led type [ 35.435380] Fail to get disk 3 led type [ 35.435586] Fail to get disk 4 led type [ 35.435794] Fail to get disk 5 led type [ 35.436006] Fail to get disk 6 led type [ 35.436214] Fail to get disk 7 led type [ 35.436421] Fail to get disk 8 led type [ 35.436627] Fail to get disk 9 led type [ 35.436837] Fail to get disk 10 led type [ 35.437050] Fail to get disk 11 led type [ 35.437262] Fail to get disk 12 led type [ 35.437675] 2023-11-23 1:49:10 UTC [ 35.437867] synobios: load, major number 201 [ 35.438097] Brand: Synology [ 35.438250] Model: SA-6400 [ 35.438399] synobios cpu_arch proc entry initialized [ 35.438664] synobios crypto_hw proc entry initialized [ 35.438939] synobios syno_platform proc entry initialized [ 35.442006] Module [epyc7002_synobios] is removed. [ 35.442282] synobios: unload [ 39.153181] Module [rp] is removed. [ 39.337330] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null) [ 39.354142] VFS: opened file in mnt_point: (/dev), file: (/urandom), comm: (ttyd), pid:(4947) [ 39.354143] VFS: opened file in mnt_point: (/dev), file: (/null), comm: (sh), pid:(4947) [ 39.354605] VFS: opened file in mnt_point: (/dev), file: (/null), comm: (sh), pid:(4947) [ 39.356221] VFS: opened file in mnt_point: (/dev), file: (/urandom), comm: (ttyd), pid:(4947) [ 39.356662] VFS: opened file in mnt_point: (/dev), file: (/null), comm: (sh), pid:(4947) [ 39.357119] VFS: opened file in mnt_point: (/dev), file: (/null), comm: (sh), pid:(4947) [ 39.383751] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: prjquota,rootprjquota,barrier=1 [ 40.114672] VFS: opened file in mnt_point: (/dev), file: (/urandom), comm: (ttyd), pid:(4947) [ 40.114675] VFS: opened file in mnt_point: (/dev), file: (/null), comm: (sh), pid:(4947) [ 40.115180] VFS: opened file in mnt_point: (/dev), file: (/null), comm: (sh), pid:(4947) [ 40.191005] systemd[1]: systemd 219 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR -SMACK +SYSVINIT -UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS -ACL +XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN) [ 40.193156] systemd[1]: Detected architecture x86-64. [ 40.193483] systemd[1]: Running with unpopulated /etc. [ 40.194056] systemd[1]: Set hostname to <SynologyNAS>. [ 40.194985] systemd[1]: Initializing machine ID from random generator. [ 40.241533] systemd[1]: Configuration file /usr/lib/systemd/system/acpid.service is marked executable. Please remove executable permission bits. Proceeding anyway. [ 40.258052] systemd[1]: Populated /etc with preset unit settings. [ 40.414770] syno-pkg-generator: begin processing builtin package [ 40.415422] syno-pkg-generator: Load info, spk=[ActiveInsight-x86_64-2.2.2-23120.spk] [ 40.452664] syno-pkg-generator: Load info, spk=[BackupRestoreManager-x86_64-2.5.2-12461.spk] [ 40.471492] syno-pkg-generator: Load info, spk=[DhcpServer-x86_64-1.0.2-0046.spk] [ 40.479526] syno-pkg-generator: Load info, spk=[FileStation-x86_64-1.4.1-1559.spk] [ 40.501094] syno-pkg-generator: Load info, spk=[HighAvailability-x86_64-2.1.4-1581.spk] [ 40.522133] syno-pkg-generator: Load info, spk=[HybridShare-epyc7002-1.4.1-1512.spk] [ 40.538099] syno-pkg-generator: Load info, spk=[HyperBackup-ED-x86_64-1.0.0-3716.spk] [ 40.570218] syno-pkg-generator: Load info, spk=[OAuthService-x86_64-1.1.4-0101.spk] [ 40.575268] syno-pkg-generator: Load info, spk=[Python2-x86_64-2.7.18-1004.spk] [ 40.593864] syno-pkg-generator: Load info, spk=[QuickConnect-x86_64-1.0.4-0108.spk] [ 40.608145] syno-pkg-generator: Load info, spk=[SMBService-x86_64-4.15.13-0871.spk] [ 40.648068] syno-pkg-generator: Load info, spk=[ScsiTarget-x86_64-1.0.10-0314.spk] [ 40.665831] syno-pkg-generator: Load info, spk=[SecureSignIn-x86_64-1.1.4-0341.spk] [ 40.675674] syno-pkg-generator: Load info, spk=[StorageManager-epyc7002-1.0.0-0017.spk] [ 40.690815] syno-pkg-generator: Load info, spk=[SupportService-x86_64-1.1.0-21017.spk] [ 40.696094] syno-pkg-generator: Load info, spk=[SynologyUniversalSearch-x86_64-1.7.0-0704.spk] [ 40.721840] syno-pkg-generator: Load info, spk=[USBCopy-x86_64-2.2.1-1306.spk] [ 40.729458] syno-pkg-generator: Generate builtin pkg install units [ 40.735035] syno-pkg-generator: Generate builtin pkg startup units [ 41.017113] syno-pkg-generator: end processing builtin package [ 41.095557] systemd[1]: Configuration file /usr/lib/systemd/system/acpid.service is marked executable. Please remove executable permission bits. Proceeding anyway. [ 41.107490] systemd[1]: Cannot add dependency job for unit syno-qlogic-rdma-modules-load.service, ignoring: Unit syno-qlogic-rdma-modules-load.service is masked. [ 41.108306] systemd[1]: Cannot add dependency job for unit syno-mlnx-rdma-modules-load.service, ignoring: Unit syno-mlnx-rdma-modules-load.service is masked. [ 41.128033] zram: Added device: zram0 [ 41.128350] zram: Added device: zram1 [ 41.128416] zram: Added device: zram2 [ 41.128838] zram: Added device: zram3 [ 41.136085] cryptd: max_cpu_qlen set to 1000 [ 41.142566] systemd-journald[7756]: Received request to flush runtime journal from PID 1 [ 41.144927] AVX2 version of gcm_enc/dec engaged. [ 41.145191] AES CTR mode by8 optimization enabled [ 41.151307] md: md1 stopped. [ 41.153312] md/raid1:md1: active with 1 out of 4 mirrors [ 41.153754] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 41.155072] md1: detected capacity change from 0 to 2147418112 [ 41.160200] flashcache_syno: flashcache-1.0-syno-v25-pin-file-2023-09-23-22:10-debug initialized [ 41.171107] NET: Registered protocol family 10 [ 41.171487] Segment Routing with IPv6 [ 41.173531] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 41.189094] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 41.213799] Adding 2097084k swap on /dev/md1. Priority:-2 extents:1 across:2097084k [ 41.215159] zram0: detected capacity change from 0 to 2461007872 [ 41.225860] Adding 2403324k swap on /dev/zram0. Priority:1 extents:1 across:2403324k SS [ 41.227155] zram1: detected capacity change from 0 to 2461007872 [ 41.238800] Adding 2403324k swap on /dev/zram1. Priority:1 extents:1 across:2403324k SS [ 41.240072] zram2: detected capacity change from 0 to 2461007872 [ 41.249911] Adding 2403324k swap on /dev/zram2. Priority:1 extents:1 across:2403324k SS [ 41.251218] zram3: detected capacity change from 0 to 2461007872 [ 41.260057] loop: module loaded [ 41.262827] Adding 2403324k swap on /dev/zram3. Priority:1 extents:1 across:2403324k SS [ 41.265906] Intel(R) Gigabit Ethernet Linux Driver - version 5.4.6 [ 41.266245] Copyright(c) 2007 - 2020 Intel Corporation. [ 41.272321] Intel(R) 10GbE PCI Express Linux Network Driver - version 5.9.4 [ 41.272691] Copyright(c) 1999 - 2020 Intel Corporation. [ 41.278202] r8168 Gigabit Ethernet driver 8.046.04-NAPI-DASH loaded [ 41.284677] Reinit 1 8001 [ 41.284853] Reinit 2 1 [ 41.295037] Reinit 1 8001 [ 41.295211] Reinit 2 1 [ 41.295873] r8168: This product is covered by one or more of the following patents: US6,570,884, US6,115,776, and US6,327,625. [ 41.298488] r8168 Copyright (C) 2020 Realtek NIC software team <nicfae@realtek.com> This program comes with ABSOLUTELY NO WARRANTY; for details, please see <http://www.gnu.org/licenses/>. This is free software, and you are welcome to redistribute it under certain conditions; see <http://www.gnu.org/licenses/>. [ 41.344920] qed_init called [ 41.345086] QLogic FastLinQ 4xxxx Core Module qed 8.59.6.0 [ 41.345383] creating debugfs root node [ 41.349217] qede_init: QLogic FastLinQ 4xxxx Ethernet Driver qede 8.59.6.0 [ 41.363671] bnx2x: QLogic 5771x/578xx 10/20-Gigabit Ethernet Driver bnx2x 1.715.8 ($DateTime: 2020/08/17 18:31:34 $) [ 41.364232] creating debugfs root node [ 41.403662] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 41.404592] ehci-pci: EHCI PCI platform driver [ 41.405666] uhci_hcd: USB Universal Host Controller Interface driver [ 41.417210] synobios open /dev/ttyS1 success [ 41.417447] Fail to get disk 1 led type [ 41.417654] Fail to get disk 2 led type [ 41.417862] Fail to get disk 3 led type [ 41.418070] Fail to get disk 4 led type [ 41.418276] Fail to get disk 5 led type [ 41.418478] Fail to get disk 6 led type [ 41.418685] Fail to get disk 7 led type [ 41.418887] Fail to get disk 8 led type [ 41.419097] Fail to get disk 9 led type [ 41.419302] Fail to get disk 10 led type [ 41.419510] Fail to get disk 11 led type [ 41.419718] Fail to get disk 12 led type [ 41.420058] 2023-11-23 1:49:16 UTC [ 41.420238] synobios: load, major number 201 [ 41.420475] Brand: Synology [ 41.420626] Model: SA-6400 [ 41.420769] synobios cpu_arch proc entry initialized [ 41.421038] synobios crypto_hw proc entry initialized [ 41.421302] synobios syno_platform proc entry initialized [ 41.442321] usb-storage 3-5:1.0: USB Mass Storage device detected [ 41.442753] scsi host1: usb-storage 3-5:1.0 [ 41.443067] usbcore: registered new interface driver usb-storage [ 41.444674] usbcore: registered new interface driver uas [ 41.790005] eth0: 0xffffc90000141000, 00:11:32:c7:f4:be, IRQ 139 [ 41.796117] Reinit 1 8001 [ 41.796291] Reinit 2 1 [ 41.806483] Reinit 1 8001 [ 41.806667] Reinit 2 1 [ 41.824980] Reinit 1 8001 [ 41.825151] Reinit 2 1 [ 41.974670] 8021q: 802.1Q VLAN Support v1.8 [ 42.415199] Module [adt7475] is removed. [ 42.432000] Module [hwmon_vid] is removed. [ 42.498608] scsi 1:0:0:0: Direct-Access SanDisk Ultra Fit 1.00 PQ: 0 ANSI: 6 [ 42.499267] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 42.499587] sd 1:0:0:0: [synoboot] 60063744 512-byte logical blocks: (30.8 GB/28.6 GiB) [ 42.501664] sd 1:0:0:0: [synoboot] Write Protect is off [ 42.501963] sd 1:0:0:0: [synoboot] Mode Sense: 43 00 00 00 [ 42.502626] sd 1:0:0:0: [synoboot] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 42.518964] synoboot: synoboot1 synoboot2 synoboot3 [ 42.520865] sd 1:0:0:0: [synoboot] Attached SCSI removable disk [ 42.545553] ext2: synoboot2 mounted, process=synoencvolume [ 42.547598] ext4: synoboot2 mounted, process=synoencvolume [ 42.553184] vfat: synoboot2 mounted, process=synoencvolume [ 42.589590] FAT-fs (synoboot2): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 42.591398] synoboot2 unmounted, process=synoencvolume [ 43.021791] raid6: avx512x4 gen() 57465 MB/s [ 43.038802] raid6: avx512x4 xor() 17066 MB/s [ 43.055798] raid6: avx512x2 gen() 62430 MB/s [ 43.072876] raid6: avx512x2 xor() 37980 MB/s [ 43.089874] raid6: avx512x1 gen() 61643 MB/s [ 43.106873] raid6: avx512x1 xor() 36375 MB/s [ 43.123878] raid6: avx2x4 gen() 50022 MB/s [ 43.140879] raid6: avx2x4 xor() 19525 MB/s [ 43.157878] raid6: avx2x2 gen() 51638 MB/s [ 43.174878] raid6: avx2x2 xor() 29991 MB/s [ 43.191878] raid6: avx2x1 gen() 40183 MB/s [ 43.208875] raid6: avx2x1 xor() 23823 MB/s [ 43.225878] raid6: sse2x4 gen() 13734 MB/s [ 43.242876] raid6: sse2x4 xor() 7185 MB/s [ 43.259876] raid6: sse2x2 gen() 14355 MB/s [ 43.276876] raid6: sse2x2 xor() 9233 MB/s [ 43.293875] raid6: sse2x1 gen() 13423 MB/s [ 43.310874] raid6: sse2x1 xor() 7491 MB/s [ 43.311116] raid6: using algorithm avx512x2 gen() 62430 MB/s [ 43.311418] raid6: .... xor() 37980 MB/s, rmw enabled [ 43.311688] raid6: using avx512x2 recovery algorithm [ 43.312792] xor: automatically using best checksumming function avx [ 43.339209] Btrfs loaded, crc32c=crc32c-intel [ 44.448652] Module [adt7475] is removed. [ 44.456140] Module [hwmon_vid] is removed. [ 44.583151] ata1.00: configured for UDMA/133 [ 44.583422] ata1 : EH complete [ 44.583606] Invalid parameter [ 44.583876] ata1.00: Enabling discard_zeroes_data [ 44.618921] Invalid parameter [ 45.957298] Reinit 1 8001 [ 45.957519] Reinit 2 1 [ 45.964898] r8168: eth0: link up 1 Gbps [ 46.444101] capability: warning: `nginx' uses 32-bit capabilities (legacy support in use) [ 46.482957] Module [adt7475] is removed. [ 46.500887] Module [hwmon_vid] is removed. [ 49.436892] ext2: synoboot2 mounted, process=synopkicompatsy [ 49.438594] ext4: synoboot2 mounted, process=synopkicompatsy [ 49.439969] vfat: synoboot2 mounted, process=synopkicompatsy [ 49.471244] FAT-fs (synoboot2): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 49.485295] synoboot2 unmounted, process=synopkicompatsy [ 49.523681] ext2: synoboot2 mounted, process=synopkicompatsy [ 49.525347] ext4: synoboot2 mounted, process=synopkicompatsy [ 49.526278] vfat: synoboot2 mounted, process=synopkicompatsy [ 49.542896] FAT-fs (synoboot2): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 49.589954] synoboot2 unmounted, process=synopkicompatsy [ 49.748581] iSCSI:target_core_rodsp_server.c:1008:rodsp_server_init RODSP server started, login_key(22e1b0466126). [ 49.788425] syno_extent_pool: module license 'Proprietary' taints kernel. [ 49.788778] Disabling lock debugging due to kernel taint [ 49.790539] iSCSI:extent_pool.c:766:ep_init syno_extent_pool successfully initialized [ 49.829332] iSCSI:target_core_device.c:593:se_dev_align_max_sectors Rounding down aligned max_sectors from 4294967295 to 4294967288 [ 49.829958] iSCSI:target_core_configfs.c:6124:target_init_dbroot db_root: cannot open: /etc/target [ 49.830590] iSCSI:target_core_lunbackup.c:367:init_io_buffer_head 2048 buffers allocated, total 8388608 bytes successfully [ 49.904776] iSCSI:target_core_file.c:128:fd_attach_hba RODSP plugin for fileio is enabled. [ 49.905194] iSCSI:target_core_file.c:136:fd_attach_hba ODX Token Manager is enabled. [ 49.905578] iSCSI:target_core_multi_file.c:126:fd_attach_hba RODSP plugin for multifile is enabled. [ 49.906024] iSCSI:target_core_multi_file.c:134:fd_attach_hba ODX Token Manager is enabled. [ 49.906435] iSCSI:target_core_ep.c:782:ep_attach_hba RODSP plugin for epio is enabled. [ 49.906824] iSCSI:target_core_ep.c:789:ep_attach_hba ODX Token Manager is enabled. [ 50.207215] iSCSI:qla_dbg.c:2572:ql_log qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 10.02.00.103-k. [ 50.409784] ext2: synoboot1 mounted, process=syno_bios_log_c [ 50.415214] ext4: synoboot1 mounted, process=syno_bios_log_c [ 50.416659] vfat: synoboot1 mounted, process=syno_bios_log_c [ 50.449917] FAT-fs (synoboot1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 50.452577] synoboot1 unmounted, process=syno_bios_log_c [ 52.246771] findhostd uses obsolete (PF_INET,SOCK_PACKET) [ 53.782136] fuse: init (API version 7.32) [ 430.287517] md/raid1:md2: active with 1 out of 1 mirrors [ 430.288234] md2: detected capacity change from 0 to 229072961536 [ 430.599405] flashcache_syno: /dev/vg1/volume_1 exclude check success [ 430.687526] BTRFS: device label 2023.11.23-01:55:45 v69057 devid 1 transid 3 /dev/mapper/cachedev_0 scanned by mkfs.btrfs (24756) [ 430.704724] BTRFS info (device dm-2): using free space tree [ 430.705033] BTRFS info (device dm-2): using block group cache tree [ 430.705368] BTRFS info (device dm-2): has skinny extents [ 430.705663] BTRFS info (device dm-2): flagging fs with big metadata feature [ 430.708399] BTRFS info (device dm-2): enabling ssd optimizations [ 430.708752] BTRFS info (device dm-2): root of syno feature tree is null [ 430.709362] BTRFS info (device dm-2): creating free space tree [ 430.709813] BTRFS info (device dm-2): setting compat-ro feature flag for FREE_SPACE_TREE (0x1) [ 430.711711] BTRFS info (device dm-2): cleaning free space cache v1 [ 430.713248] BTRFS info (device dm-2): creating UUID tree [ 430.715263] BTRFS info (device dm-2): setting compat feature flag for BLOCK_GROUP_CACHE_TREE (0x4000000000000000) [ 430.722384] BTRFS info (device dm-2): setting incompat feature flag for DEFAULT_SUBVOL (0x2) [ 430.818613] SYNO.Storage.CG (24434): drop_caches: 3 [ 430.871067] BTRFS info (device dm-2): enabling auto syno reclaim space [ 430.871486] BTRFS info (device dm-2): enabling ssd optimizations [ 430.871851] BTRFS info (device dm-2): using free space tree [ 430.872184] BTRFS info (device dm-2): using block group cache tree [ 430.872561] BTRFS info (device dm-2): has skinny extents [ 430.877094] BTRFS info (device dm-2): root of syno feature tree is null [ 431.384499] The mempool could be used by other devices [ 431.423343] Synotify use 16384 event queue size [ 431.423630] Synotify use 16384 event queue size [ 431.621356] BTRFS info (device dm-2): using free space tree [ 431.621668] BTRFS info (device dm-2): using block group cache tree [ 578.518466] audit: type=1400 audit(1700704692.940:2): apparmor="DENIED" operation="mount" info="failed srcname match" error=-13 profile="/volume*/@appstore/CodecPack/usr/bin/synoame-bin-auto-install-needed-codec" name="/tmp/bootmnt/" pid=29009 comm="synoame-bin-aut" fstype="ext2" srcname="/dev/synoboot2" flags="rw, silent" [ 578.520004] audit: type=1400 audit(1700704692.940:3): apparmor="DENIED" operation="mount" info="failed srcname match" error=-13 profile="/volume*/@appstore/CodecPack/usr/bin/synoame-bin-auto-install-needed-codec" name="/tmp/bootmnt/" pid=29009 comm="synoame-bin-aut" fstype="ext4" srcname="/dev/synoboot2" flags="rw, silent" [ 578.521511] audit: type=1400 audit(1700704692.940:4): apparmor="DENIED" operation="mount" info="failed srcname match" error=-13 profile="/volume*/@appstore/CodecPack/usr/bin/synoame-bin-auto-install-needed-codec" name="/tmp/bootmnt/" pid=29009 comm="synoame-bin-aut" fstype="vfat" srcname="/dev/synoboot2" flags="rw, silent" [ 585.887906] audit: type=1400 audit(1700704700.310:5): apparmor="DENIED" operation="mount" info="failed srcname match" error=-13 profile="/usr/syno/sbin/synoscgi//SYNO.AME.License" name="/tmp/bootmnt/" pid=29346 comm="SYNO.AME.Licens" fstype="ext2" srcname="/dev/synoboot2" flags="rw, silent" [ 585.889291] audit: type=1400 audit(1700704700.310:6): apparmor="DENIED" operation="mount" info="failed srcname match" error=-13 profile="/usr/syno/sbin/synoscgi//SYNO.AME.License" name="/tmp/bootmnt/" pid=29346 comm="SYNO.AME.Licens" fstype="ext4" srcname="/dev/synoboot2" flags="rw, silent" [ 585.890667] audit: type=1400 audit(1700704700.310:7): apparmor="DENIED" operation="mount" info="failed srcname match" error=-13 profile="/usr/syno/sbin/synoscgi//SYNO.AME.License" name="/tmp/bootmnt/" pid=29346 comm="SYNO.AME.Licens" fstype="vfat" srcname="/dev/synoboot2" flags="rw, silent" This is the result of installing SA6400-69057 on an Intel I5-1136G7 laptop. There is no kernel panic. The /dev/dri directory is not visible yet. I will proceed with more detailed settings related to transcoding.

Salut, je viens d'installer la version 7.2 sur un pc portable avant de faire la maj de mon installation existante et je rencontre un souci concernant le transcoding via video station. Malgré l'addon codecpatch avant de compiler le loader, cela ne fonctionne pas. j'obtiens toujours l'erreur sur l'image ci-jointe. J'ai également tenté d'installer le wrapper de Darknebular mais cela ne fonctionne pas mieux. Auriez vous une procédure fonctionnelle à me proposer? Dois je faire quelque chose concernant le SN et l'adresse mac? Merci d'avance pour votre aide.

DS3622xs+ is recommended for Intel 2nd generation CPU. If transcoding is required, an Intel 4th generation or higher or Atom series CPU is required.

Hello everyone. I'm new with xpenlogy so please be understanding. I've bought based Alder Lake CPU (N100) Aoostar R1 minipc. I would like to install xpenology using DS3622xs+ image. Could you tell me- does xpenology supports transcoding for this CPU (Intel UHD Graphics 24EUs (Alder Lake-N))?

Getting some 4k content, and noticing that when set to 1080p high, it has to stop and buffer contantly. Task manager indicates ~60-80% cpu usage. HW transcoding is enabled in plex. Running: baremetal - i3 9100 - asrock rack c246 wsi - 6.2.3 U3 w/ Jun's 1.4b - DS918+ and driver extension Plex seems to indicate transcoding is taking place on hardware and cd/dev/dri ls indicates card0 + renderD128 present in the folder Turning off hw acceleration + transcoding in plex yields no change in performance or CPU usage.

Hi, I just migrated from DS918+ on Z230 SFF, first to ARPL DS920, and now for testing to DVR1622 on m-shell. Everything is working. All upgrade is OK. As I remember TCRP has faster VM than ARPL and i can see it. Everything is working on Z240 Sff with i7-6700T. Even m.2 navm storage pool is working, error about unsupported disk typ gon after repair pool. I cant only see that i have m.2 disk in slot as i could see in DS920 on ARPL. I have 2 questions 1. LAN card in HP is i219-LM but m-shell and also new ARPL recognise as e1000. 2. Second card (WiFi USB - just for test) is not recognised in free time i need to test hardware transcoding is working, and find ip cam to check face recognition. In AME everything looks good Great job with loader.

I am glad that this worked for you. The only way to activate or load the license just installed is trying to transcoding something using Video Station (Transco OffLine with a movie with codec supported like AC3 (You don't need to wait to finish this transcodification to other quality)) and then you will have activated your license, not only installed. Then, you will can to install the Wrapper (ADVANCED or SIMPLEST one) in order to play movies with EAC3, DTS, AAC, TrueHD. The installation script for my Wrapper needs to have the AME License installed and ACTIVATED or LOADED. I will wait for your feedback. Best regards.

I am trying to get Plex Docket set up to use hardware transcoding. I am missing the dev/dri folder and I can't find any references on how to get it created. I assume it is because there are drivers missing? when I try to create the Docker image it fails because this folder can't be found. any help would be appreciated I have a Plex Pass. DSM 7.1-42661 Update 1 Intel Core i5-9600K Tinycore Redpill loader

Hi Everyone I have been renting a dedicated server in a data center for almost 8 years with ESXi and my Xpenology inside, did a couple of migrations from different datacenters during those 8 years, it was an amazing setup, I never lost any data and it was the fastest Synology I ever had. My official Synology at home has almost 10 years now and DSM is quite slow. But now I want to build a new bare-metal Xpenology !! It started because of THIS video from Linustech : https://youtu.be/boKmZKTKXHc?t=34 and makes me obsessed to make a new "sexy build" with, I hope, the latest CPU to keep this setup for a long time. So a few questions came to my mind and I already did some research but the answers are not so satisfying, mostly in terms of choice for new hardware. So I am asking your experience if you have some tips to go on the good track. For the hardware, I am hesitating between intel or AMD, but when I read the compatibility with the gen 11 from intel, look like there is some problem and if I want to enjoy the Dual M2 slot on the mini-itx MB I have to use gen 11th to unlock the second M2 slot which is not the case with AMD, the 2 x M.2 slot are accessible with all CPU. There is the two configs I am hesitating : AMD Asus ROG STRIX B550-I or GIGABYTE MOTHERBOARD B550I AORUS PRO Ryzen 5 5600G (has a gpu for the hardware transcoding) 16gb ram ddr4 (ECC if possible) 4 or 5 HDD 8tb in raid Case JONSBO N1 (I really love this one) M.2 SSD cache (maybe minimum 128gb) M.2 sata port extension Or Intel ASUS ROG STRIX B560-I GAMING (or ASUS ROG STRIX Z590-I GAMING but a bit expensive) Proc : any 11th gen that you recommend 12 gb ram (ECC if possible) Same case, M2 and HDD of the AMD config Do you have any recommendations on which configuration to choose? and do you have experience with hardware transcoding on some similar setup? I want to go as much as possible on the bare-metal solution to enjoy the cache SSD but any advice on the ESXI part is welcome thank you for your time guys. Cheers

Just an Update from my side: I have set up the ASRock N100DC-ITX, with an USB memory stick and installed the newest DSM 7.2 via arpl-i18n. I chose DS918+ in order to be able to use transcoding. To be able to use transcoding, you will need to generate an SN and MAC prior to building the loader. You can do this when configuring the loader, as the generator is integrated there. after installing dsm, I used the following links to install the licence fix for AME. https://github.com/darknebular/Wrapper_VideoStation as seen in:

I'm just J3455 want to enable hw transcoding, i have try to build i915.ko with GPL Source and ToolChain, but shows "Module.symvers" is missing. To use SA6400 insteed of DS920+ because SA6400 is kernel 5.10 so it can enable BBR and FQ. Download ToolChain wget https://cndl.synology.cn/download/ToolChain/toolchain/7.2-63134/AMD x86 Linux Linux 5.10.55 (epyc7002)/epyc7002-gcc1220_glibc236_x86_64-GPL.txz tar -Jxf epyc7002-gcc1220_glibc236_x86_64-GPL.txz Download Synology NAS GPL Source Linux-5.10.x For 7.2-64570 wget https://global.synologydownload.com/download/ToolChain/Synology%20NAS%20GPL%20Source/7.2-64570/epyc7002/linux-5.10.x.txz tar -Jxf linux-5.10.x.txz Prepare for cross compilation export ARCH=amd64 export CROSS_COMPILE=/home/parallels/synology/x86_64-pc-linux-gnu/bin/x86_64-pc-linux-gnu- cd linux-5.10.x cp synology/synoconfigs/epyc7002 .config make oldconfig make prepare make scripts make menuconfig make menuconfig Compile the i915 module make M=drivers/gpu/drm/i915/ CONFIG_DRM_I915=m clean make M=drivers/gpu/drm/i915/ CONFIG_DRM_I915=m modules Error WARNING: Symbol version dump "Module.symvers" is missing. Modules may not have dependencies or modversions. MODPOST drivers/gpu/drm/i915//Module.symvers WARNING: modpost: Symbol info of vmlinux is missing. Unresolved symbol check will be entirely skipped. CC [M] drivers/gpu/drm/i915//i915.mod.o make[2]: *** No rule to make target 'scripts/module.lds', needed by 'drivers/gpu/drm/i915//i915.ko'. Stop. make[1]: *** [scripts/Makefile.modpost:130: __modpost] Error 2 make: *** [Makefile:1726: modules] Error 2

Hi guys, I'm running DSM 7 using arpl loader, I'm looking into adding a 1060 gtx to my BareMetal system. Would it be worth adding for plex streaming, I have 5 family members using Plex although not at the same time. Would the graphics card deal with the Plex transcoding and does it work out of the box with the ARPL loader? I currently run a i5 7500. TIA

codec patch file from the above quote and AME 3.0 patch from wangsiji solves my Synology photos transcoding issues, thxs for all your work @wirgen @wangsiji and @dj_nsk for posting the links! wangsiji AME 3.0 patch i got from here https://xpenology.com/forum/topic/65643-ame-30-patcher/ now after the codec patch, videos take a longer time to load on mobile and mobile web browser I do not see any delay in pc/tv and also ended up with AAC grayed out in AME 1.0.0-00001 and won't update to 1.0.0-50001

Before you begin to change something in your working system, it is strongly recommended to make backups of your most valuable data, so you do not regret about their irretrievable loss. Everything you do is your fear and risk, no one encourages you to do it. The easiest and most reliable way to safely try to do it, turn off all the disks and the boot flash drive from the current system, take a clean disk and another USB flash drive and try to install a new version of the bootloader and the system, if it rolled, then do already on the current system. 1. How to install (described for a computer with Windows): a) download the 1.04 b boot loader image (the original theme is here), create a directory in the root of the disk, for example, c:/918/ and put the bootloader image there b) determine the VID/PID of the flash drive or card reader into which it is inserted (control Panel-Device Manager-USB Controllers-Your flash drive/reader-Properties-Information-hardware ID, you need to ensure that the DSM system recognizes this disk and does not try to install itself on it, if you incorrectly define and register these parameters, the istall process will crash by mistake 13) c) download, install and run the OSFmount program, mount Partition 0 (15 Mb) from the bootloader file, remove the "Read-only drive" checkbox before mounting d) download, install and run Akelpad, open grub/grub file.cfg on previously mounted disk, edit and save: set vid=0xA234 #VID flash drive/reader set pid=0xB678 #PID of flash drive/reader set sn=1780PDN123456 #sn set mac1=001132123456 #mac of the first network card set mac2=001132123457 #mac of the second network card, the second and subsequent differ from the first by +1 in the last bit in the hex system ... set netif_num=2 #number of network cards ... set sata_args= 'SataPortMap=6' # sata controller, values: 6 - 1 controller on 6 ports; 22-2 controllers on 2 ports; 42-2 controllers, the first on 4 ports, the second on 2, etc. Where to get sn and mac - is your headache, Google will help you, the system will be installed and will work with those that are initially registered in the bootloader, but with the restriction of the functioning of some services and modules, such as: QC, push notifications, activation of codecs for transcoding, installation of syno licenses... e) unmount the disk in OSFmount f) download, install and run the Rufus program and record the previously prepared image on a flash drive g) insert the flash drive into the computer on which you plan to run xpen, connect the drives, turn on the power h) disable the firewall in the anti-virus, in the browser type http://find.synology.com or install Synology Assistant from the syno website and find the newly installed xpen on your network j) install DSM following the instructions of the installation program and start setting up (how to do it here is not described, because all the answers are in the syno knowledge base) There is a utility where the main programs for Windows x64 are collected 2. Transcoding (needs sn and mac from real syno hardware) Most likely to run on Intel processors starting from the 4th generation (Haswell), but there are nuances with motherboard models and BIOS. Check as follows: hardware (hw) transcoding - at the root of the system should be a directory /dev/dri with subdirectories in it, if not, but there is no HW transcoding to check - look for the directory with the terminal/ssh command cd /dev/dri . software (sw) transcoding - some codecs must run in DSM, you can check it with the command in the terminal / ssh cat /usr/syno/etc/codec/activation.conf If the result is the same, sw transcoding will ran {"success":true,"activated_codec":["h264_dec","h264_enc","mpeg4part2_dec","hevc_dec","aac_dec","aac_enc","ac3_dec","vc1_dec","vc1_enc"],"token":"123456789987654abc"} If there is nothing similar, there is no sw transcoding. 3. Perhaps the most optimal budget solutions with transcoding will be the following: ASRock J4105-ITX Asrock J5005-ITX Who wants more - use mb with the latest generation of Intel processors with Intel i210 or realtek 8111 . But this is already determined by the size of the your wallet and the functionality that you additionally want to get from xpen. P.S. Sorry for my english 😂

Sorry for responding to this old topic. I have a DS918+ on a barebone with a GTX 1080. My goal would be transcoding with the GPU using Jellyfin in Docker. Could someone help me? I tried unpacking the SPK files in order to modify the info, but the newer ones don't open as such.

Hey there, I'm trying to setup my box so I can stream movies with a lower bitrate when i'm not home. I have about 50MBit/s of upload bandwidth, so stuff with very high quality needs to be transcoded, ideally using hardware acceleration, the processor itself is not the most powerful. I'm using an Asrock J4105 Board with 8GB ram, running a 918+ DSM 7.1-42661 Update 1 that I installed using the TC loader. I already applied the Patch from here, but nothing changed - at least no changes are visible.: Any Idea how I can see if Hardware acceleration is working at all?

Hi, you can observe my config an count it as a referrence. It is capable of everything you need. I tried the transcoding feature and it carried 9x4k simultaneous threads (network connection was the bottleneck in this scenario). Also, it runs a lot of virtualization tasks and docker containers.

see here. 1) you need Plex -> HW transcoding -> DS918+ or DS920+ only -> Intel 9th gen (10th gen with patched i915.ko - maximum) with integrated GPU (no needs GeForce...) -> Core i7-9700K (or Core i7-10700K with patch) - this is the maximum and sufficient CPU 2) 100Tb -> requires 6-8 SATA connectors on the m/b (or you can add an external SATA controller connected to PCIe) Look for a motherboard with these limitations in mind. (and what you have chosen is obviously redundant resources that will not be used in Xpenology)

Hi, i just assembled a nas with that specs: Asrock J5040 2x8gb ddr4 an 4tb hdd on 918+ and DSM 7.1.0-42661 And i want to install the i915 drivers for HW transcoding but im totally noob and im looking for a step by step guide to do that, someone can give me a hand? 😅 Sorry for my english.

I will tell you the results of further investigation regarding DS1522+. DS1522+ is a bay expansion model of DS923+ and has the same characteristics of the Ryzen r1000 platform as DS923+. DS1520+ utilizes an Intel iGPU capable of transcoding with the Gemini Lake platform. Do you know the difference between these characteristics? Still think you need DS1522+?

Wasnt sure where to post this, so I'll try here. I successfully got dsm7u3 working on an older branded nas box (baremetal). It has a Pentium N3710 cpu and 16gb ram. This box did hw decode transcoding with its native software from the manufacture. Now it's running dsm7. I installed video station directly from inside dsm7 and the package center, added a couple videos, and when I load videostation and try to play them it plays for a few seconds and buffers and keeps doing that on and on. I was under the impression rp installs a modified i915 driver that transcodes (hw decode) on intel cpu's? I'm not sure? How can I test if the hw decode is working or not?

Change fan psu is very easy and reduce the noise. 12 cm fan rear is more complicate and for example, with Noctua and Nvidia Tesla gpu HP Microserver Gen 8 power off because the fan not noise but haven´t high pressure and raise the temperatures with transcoding or any high work.

I have an MoBo with 12500h right now . You should contact @jimmmmm, he's the dev. I can told you that everything works fine, even virtual machine manager. Actually, have no bugs, HW transcoding works fine, all core are available and usable. Tried to overclock the CPU, but comsuption is too high lol. So with default configuration, with 4 HDD, 2 nvme & 1 SSD, consumption is about 45w idle, 60w with normal job and 130w with stress test. My configuration : Motherboard Erying 12500h 64Go RAM 4x18TB 2x500Gb NVMe 1x2TB SSD Noctua NH-L9i chromax.black Jonsbo n2 -- Désolé pour l'anglais, section française mais il fallait bien que je réponde

I using a m-shell and have DVA3221 working with a Quadro P2000, transcoding is working fine, currently on update 1, can I update to update 4 manually?

@wjz304, does your loader support hw transcoding for SA6400 ? Why is there no i915.ko in modules for SA6400?