merve04 Posted October 13, 2023 #26 Posted October 13, 2023 - Outcome of the update: SUCCESSFUL - DSM version prior to update: DSM 7.2.1-69057 - DSM version after update: DSM 7.2.1 69057-U1 - Loader version and model prior to update: ARC 23.10.2 (DVA1622) - Loader version and model after update: ARC 23.10.2 (DVA1622) - Using custom extra.lzma: NO - Installation type: BAREMETAL - Gigabyte B365-DS3H, i5-8400, 8x12TB, 2x4TB - Additional comments: Updated via DSM GUI, reboot required. Quote
Sonnenblume Posted October 14, 2023 #27 Posted October 14, 2023 (edited) - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 7.2.1 69057 - DSM version AFTER update: DSM 7.2.1 69057-Update 1 - Loader version and model: wjz304/arpl-i18n v23.9.7, DS920+ - Using custom extra.lzma: NO - Installation type: BAREMETAL - additional Comments: Updated via DSM-GUI (with same loader as before), reboot required. Edited October 14, 2023 by Sonnenblume Quote
Gronaldo Posted October 14, 2023 #28 Posted October 14, 2023 - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 7.2-64570 Update 3 - DSM version AFTER update: DSM 7.2.1 69057 - Loader version and model: TCRP v0.9.4.9c with Friend - DS3622xs+ - Using custom extra.lzma: NO - Installation type: BAREMETAL - Additional comments: All drives (WD-REDs) are now marked as non-verified and pools have a warning! Further update to 7.2.1-69057-1 not possible Quote
vicrod74 Posted October 15, 2023 #29 Posted October 15, 2023 (edited) - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 7.2-64570 update 3 - Loader version and model: ARPL-i18n 23.9.6 / DS3622xs+ - DSM version AFTER update: DSM 7.2.1 69057 Update 1 - Using custom extra.lzma: NO - Installation type: BAREMETAL - Dell PowerEdge R210 II, Intel Xeon E3-1200, 32 GB Mem, Broadcom 5709 Dual Port Gigabit Ethernet (BNX2) - Additional comments: Upgrade was flawless! Edited October 15, 2023 by vicrod74 Quote
valix Posted October 16, 2023 #30 Posted October 16, 2023 (edited) - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.2.3-25426 - Update 3 (DS918+) - DSM version after update: DSM 7.2.1 69057 - Update 1 (DS923+) - Loader version and model: Juns Loader 1.03b -> ARPL-i18n v23.10.3 - Using custom extra.lzma: NO - Installation type: BAREMETAL - BIOSTAR A10-8800E (AMD FX-8800P Processor -> Carrizo), ASMedia 1064 SATA Controller -> chosen all Modules - Additional comments: Didn't startup completely with DS3622XS+ Loader and also didn't startup with DS918+ Loader. It hang somewhere during the DSM launch, not during loading the ARPL loader.. Then I tested the AMD Loader fir 923+ and it worked like a charm. And the CPU Recognition Addon doesn't work. It still claims to have a R1600. Edited October 16, 2023 by valix Quote
SuperJack Posted October 16, 2023 #31 Posted October 16, 2023 Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 7.2-64570 Update 3 - Loader version and model: TinyCore RedPill Loader v0.9.5.0.m-shell.img DS3622xs+ - Using custom extra.lzma: NO - Installation type: HPE MicroServer Gen10 Plus - Additional comments: Manual update via DSM Control Panel Quote
waspsoton Posted October 20, 2023 #32 Posted October 20, 2023 - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 7.2.1-69057 Update 1 - Loader version and model: PeterSuh-Q3/tinycore-redpill latest version / DS3622xs+ - Using custom extra.lzma: NO - Installation type: BAREMETAL — msi b450m pro 8GB DDR4, Dell Perc H310, and an intel inc - Additional comments: only loader where i didnt have to worry about the lsi card. all worked first time Quote
Tong6998 Posted October 21, 2023 #33 Posted October 21, 2023 (edited) - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 7.2-64570 Update 3 - Loader version and model: Tinycore-Redpill v0.9.5.0M - DS3622xs+ - Using custom extra.lzma: NO - Installation type: BAREMETAL - ASRock C2750D4I - Additional comments: Upgraded to DSM 7.2.1-69057 Update 1 via GUI. https://github.com/PeterSuh-Q3/tinycore-redpill TURN OFF 2FA Updated through GUI, RE-booted Used PeterSuh's Tinycore-Redpill with menu (way easier) -- NEW BUILD/NEW METHOD Used Previous SN to not have to change config Built it with Friend, Reboot Asked To Migrate, OK Reboot ALL SET, EVERYTHING WORKS Edited October 21, 2023 by Tong6998 Quote
hiritsuki Posted October 22, 2023 #34 Posted October 22, 2023 (edited) - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 7.2.1-69057 Update 1 - Loader version and model: ARPL-i18n 23.10.4 - DS3622XS+ - Using custom extra.lzma: NO - Installation type: BAREMETAL — MSI Z77 Mpower / QB5U(i7-3770K@2.2Ghz Unlocked) - Additional comments: new install Edited October 22, 2023 by hiritsuki Quote
ikofen Posted October 22, 2023 #35 Posted October 22, 2023 Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 7.1.1-42692 Update 4 - Loader version and model: Automated RedPill Loader arpl-i18n-23.10.4 - DS3622xs+ - Using custom extra.lzma: NO - Installation type: BAREMETAL - MB: ASUS P5Q Deluxe / CPU: Q9550 - Additional comment: First created new loader (arpl-i18n-23.10.4) Quote
Alfoten Posted October 22, 2023 #36 Posted October 22, 2023 - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 7.1.1-42962 Update 1 - Loader version and model: ARPL-i18n 23.10.4 - DS920+ - Using custom extra.lzma: NO - Installation type: HP MicroServer Gen10 / AMD Opteron X3216 - Additional comment: Advanced Menu > Edit user config file manually > directboot: "true" Quote
dim2002 Posted October 24, 2023 #37 Posted October 24, 2023 - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 7.2-64570 Update 3 (DS3622xs+) - DSM version after update: DSM 7.2.1 69057 - Update 1 (DS3622xs+) - Loader version and model: ARPL-i18n v23.5.8 -> v23.10.4 - Using custom extra.lzma: NO - Installation type: BAREMETAL - GA -P67-UD3-B3 i5-2310, 8+8 GB DDR3, 3x1TB HDD, 2x2TB HDD, 3TB HDD - Additional comments: Manual update Quote
echohoteloscar Posted November 1, 2023 #38 Posted November 1, 2023 (edited) - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 7.1.1-42962 Update 4 - Loader version and model: ARPL v1.1-beta2 -> ARPL-i18n v23.10.4 (DS3622xs+) - Using custom extra.lzma: NO - Installation type: BAREMETAL - HP MicroServer Gen8 / Intel Xeon E31260L - Additional comments: Updating packages took a long time - around 2 hours Edited November 1, 2023 by echohoteloscar Quote
Bucket Posted November 1, 2023 #39 Posted November 1, 2023 (edited) - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 7.1.1-42692 Update 5 - Loader version and model : ARPL 1.1-beta2a to arpli18n 23.10.8 - DS918+ - Using custom extra.lzma: NO - Installation type: BAREMETAL - MB: Asus Z97 Pro, i7-4790k - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 7.1.1-42692 Update 5 - Loader version and model : ARPL 1.1-beta2a to arpli18n 23.10.8 - DS918+ - Using custom extra.lzma: NO - Installation type: BAREMETAL - MB: Asus Z170 Pro - i7-6700k Edited November 1, 2023 by Bucket Quote
Trabalhador Anonimo Posted November 2, 2023 #40 Posted November 2, 2023 (edited) - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 7.2-64570 update 3 - Loader version and model: M-Shell / DS3622xs+ - DSM version AFTER update: DSM 7.2.1 69057 Update 1 - Using custom extra.lzma: NO - Installation type: BAREMETAL - core i3 2100, 4GFB de ram - Additional comments: Update from GUI and reboot to TCRP and rebuild the loader to DSM 7.2.1 69057. After that a boot and a rebuild on web interface was require with another boot. Third boot and it worked, but now all HDD has a warning "firmware version not recognized. Please update database". I did that but it did not work. I download the database from Synology and try to update, but it said mine is newer and do not let update. It seams to work, but more tests are require. Edited November 2, 2023 by Trabalhador Anonimo Quote
MichelD Posted November 2, 2023 #41 Posted November 2, 2023 (edited) - Outcome of the update: SUCCESSFUL - DSM version prior update: none, fresh install (3622xs+) - DSM version AFTER update: DSM 7.2.1 69057 Update 1 - Loader version and model: arpl-i18n v23.11.0 - Using custom extra.lzma: NO - Installation type: BAREMETAL - HP Prodesk 400 G2 Mini - i3-6100T - 8GB DDR4 - Additional comments: this is my first build using arpl-i18n, has never been easier Edited November 2, 2023 by MichelD Quote
whatever000 Posted November 3, 2023 #42 Posted November 3, 2023 - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.2.2 (DS918+) - DSM version AFTER update: DSM 7.2.1 69057 (DS3622xs+) - Loader version and model: arpl-i18n v23.10.4 - Using custom extra.lzma: NO - Installation type: BAREMETAL - X10SDV-4C-TLN2F (Xeon D1521) Quote
wengi Posted November 5, 2023 #43 Posted November 5, 2023 (edited) Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 7.1.1-42962 Update 5 - Loader version and model: Before: ARPL v1.1-beta 2a After: ARPL-i18n v23.11.1 - DS3622xs+ - Using custom extra.lzma: NO - Installation type: BAREMETAL - HP Microserver Gen8 | Xeon E3 1265L | 16TB HDD | 16GB RAM - Additional comment: 1) Changed Boot-SDCard from ARPL 1.1 to ARPL-i18n - User Advanced Menu - recover installation 2) Booted DMS (still 7.1) -> worked 3) Booted ARPL-i18n and changed from DSM 7.1 to 7.2 4) Reboot to DSM and following instructions to update DSM 5) All working fine incl. direct Update to Version DSM 7.2.1-69057 Update 1 Edited November 5, 2023 by wengi Quote
dim2002 Posted November 9, 2023 #44 Posted November 9, 2023 - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 7.1-42661 Update 4 (DS3622xs+) - DSM version after update: DSM 7.2.1 69057 - Update 1 (DS3622xs+) - Loader version and model: ARPL 1.1-beta2a -> ARC v23.11.6 - Installation type: BAREMETAL - GA-H81M-S1 rev.2.1, Intel G3250, 4 GB DDR3, 5x1TB HDD, 1x160GB HDD - Additional comments: Manual update Quote
lyr83 Posted November 15, 2023 #45 Posted November 15, 2023 - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 7.2.1-69057 Update 1 - DSM version after update: DSM 7.2.1 69057 - Update 2 (DS918+) - Loader version and model: TCRP Friend Version 0.0.6 / DS918+ ("real" SN/MAC) - Using custom extra.lzma: NO - Installation type: apollolake — SuperMicro X10SLH-N6-ST031 / Intel I7-4770 / 16Gb DDR3 Quote
Sonnenblume Posted November 15, 2023 #46 Posted November 15, 2023 (edited) - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 7.2.1 69057-Update 1 - DSM version AFTER update: DSM 7.2.1 69057-Update 2 - Loader version and model: wjz304/arpl-i18n v23.9.7, DS920+ - Using custom extra.lzma: NO - Installation type: BAREMETAL - additional Comments: Updated manually, download pat-file from:https://archive.synology.com/download/Os/DSM/7.2.1-69057-2 Edited November 15, 2023 by Sonnenblume Quote
Srikanth Kamath Posted November 16, 2023 #47 Posted November 16, 2023 - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 7.2.1-69057 Update 2 - Loader version and model: ARPL-i18n v23.11.3 - Using custom extra.lzma: NO - Installation type: Dell Optiplex 9020, 16GB RAM, i3-4130 - Additional comments: pat file to be downloaded from Synology site Quote
difful Posted November 16, 2023 #48 Posted November 16, 2023 - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 7.2.1 69057-Update 1 - DSM version AFTER update: DSM 7.2.1 69057-Update 2 - Loader version and model: arc-23.10.21, DS920+ - Using custom extra.lzma: NO - Installation type: BAREMETAL optiplex 7010 - additional Comments: Updated manually, download pat-file from synology Quote
dj_nsk Posted November 17, 2023 #49 Posted November 17, 2023 - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 7.2.1 69057-Update 1 - DSM version AFTER update: DSM 7.2.1 69057-Update 2 - Loader version and model: Arc-23.11.9b, DS920+ - Installation type: virtual machine, ESXi8 - additional Comments: update with web-interface DSM Quote
Fox Mulder Posted November 17, 2023 #50 Posted November 17, 2023 - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 7.2.1 69057-Update 1 - DSM version AFTER update: DSM 7.2.1 69057-Update 2 - Loader version and model: wjz304/arpl-i18n v23.10.4, DS923+ - Using custom extra.lzma: NO - Installation type: BAREMETAL (Based on Asrock Z370 Fatal1ty + i7-8700k + 16GB) - additional Comments: Updated automatically (let the DSM download and install). I have updated ARPL to RR (the new reincarnation of ARPL) in order to keep updated. I had to actually burn the new image and recover the existing DSM in order for everything to work. But it went pretty smoothly. Now I am fully updated to version 23.11.6 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.