MichelD

- Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 7.2.1 69057 Update 3 - Loader version and model: RR (arpl-i18n) v23.11.8 - 3622xs+ - Using custom extra.lzma: NO - Installation type: BAREMETAL - HP Prodesk 400 G2 Mini - i3-6100T - 8GB DDR4 - Additional comments: Manual update via the DSM web console, reboot

I've had similar issues with an AMD CPU. I gave up and switched to Intel CPUs only. No more issues since then.

- Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 7.2.1-69057 Update 1 - Loader version and model: arpl-i18n v23.11.3 DS918+ - Using custom extra.lzma: NO - Installation type: BAREMETAL - Asrock H310CM-DVS - Celeron G4900 - 4GB RAM - Additional comments: update was proposed from the DSM web console

We very much appreciate your work and hope you'll change your mind. All the best.

This is sad news, I hope you change your mind. If not, thank you very much for your great work.

- Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 7.2.1 69057 Update 1 - Loader version and model: RR (arpl-i18n) v23.11.8 - 3622xs+ - Using custom extra.lzma: NO - Installation type: BAREMETAL - HP Prodesk 400 G2 Mini - i3-6100T - 8GB DDR4 - Additional comments: 1. Updated RR from v23.11.0 to v23.11.8 (menu.sh > Update all) 2. Manual download of DSM 7.2.1 69057 Update 3 & updated via DSM Control Panel

Is an update of RR recommended before updating DSM? Is it required to rebuild the loader after an update of RR?

I'm having exactly the same questions

- Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 7.2-64570 Update 2 - Loader version and model: arpl-i18n v23.11.3 DS918+ - Using custom extra.lzma: NO - Installation type: BAREMETAL - Asrock H310CM-DVS - Celeron G4900 - 4GB RAM - Additional comments: Replaced TCRP 0.9.4.9 with Friend 0.0.6 USB bootdrive by arpl-i18n v23.11.3 USB bootdrive Created bootloader for 7.2 DSM upgrade was automatic and went fine. It's great

- Outcome of the update: SUCCESSFUL - DSM version prior update: none, fresh install (3622xs+) - DSM version AFTER update: DSM 7.2.1 69057 Update 1 - Loader version and model: arpl-i18n v23.11.0 - Using custom extra.lzma: NO - Installation type: BAREMETAL - HP Prodesk 400 G2 Mini - i3-6100T - 8GB DDR4 - Additional comments: this is my first build using arpl-i18n, has never been easier

- Outcome of the update: SUCCESSFUL - DSM version prior update: 7.2-64570 Update 1 - Loader version and model: TCRP v0.9.4.9 + Friend 0.0.5j DS918+ - Using custom extra.lzma: NO - Installation type: BAREMETAL – Celeron G4900; Asrock H310M-HDV; 4GB DDR4, 3 disks, onboard NIC RTL8111H - Additional comments: Manual update from DSM GUI

- Outcome of the update: SUCCESSFUL - DSM version prior update: 7.1.1-42962 Update 4 - Loader version and model: TCRP v0.9.4.9 + Friend 0.0.5j DS918+ - Using custom extra.lzma: NO - Installation type: BAREMETAL – Celeron G4900; Asrock H310M-HDV; 4GB DDR4, 3 disks, onboard NIC RTL8111H - Additional comments: Created a new USB boot drive, starting from TCRP v0.9.4.9 image: ./rploader.sh update now ./rploader.sh fullupgrade now ./rploader.sh serialgen DS918+ ./rploader.sh identifyusb now ./rploader.sh satamap now ./rploader.sh build ds918p-7.2.0-64570 withfriend exitcheck.sh reboot

- Outcome of the update: SUCCESSFUL - DSM version prior update: DS918+ DSM 7.1.1-42962 Update 4 - Loader version and model: TCRP v0.9.4.3 + Friend 0.0.4 DS918+ - Using custom extra.lzma: no - Installation type: vmware Workstation 17.0.1 on top of Ryzen 7 5700X - Additional comments: Manual update from the DSM GUI

- Outcome of the update: SUCCESSFUL - DSM version prior update: TCRP v0.9.4.3 DS3622xs+ DSM 7.1.1-42962 Update 3 - Loader version and model: TCRP v0.9.4.3 DS3622xs+ - Using custom extra.lzma: no - Installation type: Baremetal HP T620 Thin Client with AMD GX-415GA Quad-Core APU; 4GB DDR3L - Additional comments: 1) Upgraded to DSM 7.1.1-42962 Update 4 via GUI 2) Booted into TCRP and run: ./rploader.sh update sudo ./rploader.sh postupdate ds3622xsp-7.1.1-42962 exitcheck.sh reboot

- Outcome of the update: SUCCESSFUL - DSM version prior update: TCRP v0.9.2.9 + Friend 0.0.4 DS918+ DSM 7.1.1-42962 Update 2 - Loader version and model: TCRP v0.9.4.3 + Friend 0.0.4 DS918+ - Using custom extra.lzma: no - Installation type: BAREMETAL – Celeron G4900; Asrock H310M-HDV; 4GB DDR4, 3 disks, onboard NIC RTL8111H - Additional comments: Manual update from the DSM GUI

- Outcome of the update: SUCCESSFUL - DSM version prior update: TCRP Friend 0.0.4 DS918+ DSM 7.1.1-42962 Update 3 - Loader version and model: TCRP Friend 0.0.4 DS918+ - Using custom extra.lzma: no - Installation type: vmware Workstation 17.0.1 on top of Ryzen 7 5700X - Additional comments: Manual update from the DSM GUI

I figured out. Installed TCRP "without Friend" and the NAS was reachable immediately. It looks like TCRP "Friend" doesn't support this hardware.

- Outcome of the update: SUCCESSFUL - DSM version prior update: none, new install - Loader version and model: TCRP v0.9.4.3. DS3622xs+ - Using custom extra.lzma: no - Installation type: Baremetal HP T620 Thin Client with AMD GX-415GA Quad-Core APU - Additional comments: Step1: ./rploader.sh update ./rploader.sh fullupgrade ./rploader.sh identifyusb ./rploader.sh serialgen DS3622xs+ ./rploader.sh satamap ./rploader.sh build ds3622xsp-7.1.1-42962 exitcheck.sh reboot Step2: Install & configure DSM Step3: Manual install Update 3 from DSM GUI Reboot in TCRP: ./rploader.sh postupdate ds3622xsp-7.1.1-42962 Note: I first tried installing TCRP "with Friend", but the NAS wasn't reachable on the netowrk. Using TCRP "without Friend" the NAS was immediately reachable.

Hello folks, I'm trying to install TCRP on a HP T620 Thinclient. I used the "withfriend" command to build the loader. I haven't installed any extension. TCRP Friend is showing an IP address, but find.synology.com or Synology Assistant doesn't find the NAS. I'm also getting a timeout when pinging the NAS. My router is showing this DHCP client with the same MAC address as shown in TCRP Friend boot screen. Any idea what's going on?

Thanks, meanwhile I ordered a second hand HP T620 ThinClient

Thank you @Peter Suh for your reply. That's a pity as it would make a very power efficient NAS. Do you know other lower power alternatives?

Does TCRP runs on ARM processors? Would like to use an Raspberry Pi 4, which has Quad core Cortex-A72 (ARM v8) 64-bit SoC

Hi folks, probable a common question. Does xpenology work on a Raspberry Pi 4 system, which has a Quad core Cortex-A72 (ARM v8) 64-bit SoC The idea is to use the RPi as a cost effective and lower power Synology Surveillance System Storing the videos on a USB thumb drive and leave it ON 24x7 Has anyone tried?

- Outcome of the update: SUCCESSFUL - DSM version prior update: TCRP v0.9.2.9 + Friend 0.0.3 DS918+ DSM 7.1.1-42962 Update 2 - Loader version and model: TCRP v0.9.3.0 + Friend 0.0.4 DS918+ - Using custom extra.lzma: no - Installation type: vmware Workstation 16.2.4 on top of Ryzen 7 5700X - Additional comments: Manual update from the DSM GUI TCRP Friend 0.0.4 shows DSM 7.1.1-42962 Update 2, even after a reboot

- Outcome of the update: SUCCESSFUL - DSM version prior update: TCRP v0.9.2.6 DS918+ DSM 7.1.1-42962 Update 1 - Loader version and model: TCRP v0.9.2.9 + Friend 0.0.3 DS918+ - Using custom extra.lzma: no - Installation type: BAREMETAL – Celeron G4900; Asrock H310M-HDV; 4GB DDR4, 3 disks, onboard NIC RTL8111H - Additional comments: Step1 - Starting from TCRP v0.9.2.6: - ./rploader.sh update - ./rploader.sh fullupgrade - ./rploader.sh bringfriend - reboot Step2 - Manual update to DSM 7.1.1-42962 Update 2 from the GUI - reboot