Trabalhador Anonimo

I did this procedure and the SSD became available as internal disk, but it did not show in the picture. It shows as disk 13. Is there a way to correct this?

I added a SSD to my box, connected to a Fujitsu Lsi 9211-8i Model: D2607-a21. The SSD is been recognize as esata drive and I cannot use it as cache. Does anyone try this recently? http://www.casler.org/wordpress/?p=246

User@NAS-BOX-3:/$ lspci -nn 0000:00:00.0 Class [0600]: Device [8086:0c08] (rev 06) 0000:00:01.0 Class [0604]: Device [8086:0c01] (rev 06) 0000:00:14.0 Class [0c03]: Device [8086:8c31] (rev 05) 0000:00:16.0 Class [0780]: Device [8086:8c3a] (rev 04) 0000:00:1a.0 Class [0c03]: Device [8086:8c2d] (rev 05) 0000:00:1b.0 Class [0403]: Device [8086:8c20] (rev 05) 0000:00:1c.0 Class [0604]: Device [8086:8c10] (rev d5) 0000:00:1c.2 Class [0604]: Device [8086:8c14] (rev d5) 0000:00:1c.3 Class [0604]: Device [8086:244e] (rev d5) 0000:00:1c.4 Class [0604]: Device [8086:8c18] (rev d5) 0000:00:1d.0 Class [0c03]: Device [8086:8c26] (rev 05) 0000:00:1f.0 Class [0601]: Device [8086:8c50] (rev 05) 0000:00:1f.2 Class [0106]: Device [8086:8c02] (rev 05) 0000:00:1f.3 Class [0c05]: Device [8086:8c22] (rev 05) 0000:01:00.0 Class [0104]: Device [1000:0072] (rev 02) 0000:03:00.0 Class [0200]: Device [10ec:8168] (rev 09) 0000:04:00.0 Class [0604]: Device [1b21:1080] (rev 04) 0000:05:00.0 Class [0200]: Device [10ec:8169] (rev 10) 0000:06:00.0 Class [0300]: Device [10de:0ca3] (rev a2) 0000:06:00.1 Class [0403]: Device [10de:0be4] (rev a1) 0001:09:00.0 Class [0106]: Device [1b4b:9235] (rev 11) 0001:0c:00.0 Class [0106]: Device [1b4b:9235] (rev 11)

What is this? tc@box:~$ ./rploader.sh satamap now usb Loader BUS: usb Found SCSI HBAs, We need to install the SCSI modules scsi-5.10.3-tinycore64 is already installed! Succesfully installed SCSI modules Found "00:1f.2 Intel Corporation 8 Series/C220 Series Chipset Family 6-port SATA Controller 1 [AHCI mode] (rev 05)" Detected 6 ports/5 drives. Override # of ports or ENTER to accept <6> Found SCSI/HBA "01:00.0 LSI Logic / Symbios Logic SAS2008 PCI-Express Fusion-MPT SAS-2 [Falcon] (rev 02)" (0 drives) lspci: -s: Invalid slot number Found SCSI/HBA "" (0 drives) lspci: -s: Invalid slot number Found SCSI/HBA "" (0 drives) lspci: -s: Invalid bus number Found SCSI/HBA "" (0 drives) lspci: -s: Invalid slot number Found SCSI/HBA "" (0 drives) lspci: -s: Invalid slot number Found SCSI/HBA "" (0 drives) lspci: -s: Invalid slot number Found SCSI/HBA "" (84 drives) lspci: -s: Invalid slot number Found SCSI/HBA "" (0 drives) lspci: -s: Invalid slot number Found SCSI/HBA "" (0 drives) lspci: -s: Invalid slot number Found SCSI/HBA "" (0 drives) lspci: -s: Invalid slot number Found SCSI/HBA "" (0 drives) lspci: -s: Invalid slot number Found SCSI/HBA "" (0 drives) lspci: -s: Invalid slot number Found SCSI/HBA "" (0 drives) lspci: -s: Invalid slot number Found SCSI/HBA "" (0 drives) lspci: -s: Invalid slot number Found SCSI/HBA "" (0 drives) lspci: -s: Invalid slot number Found SCSI/HBA "" (0 drives) Computed settings: SataPortMap=6 DiskIdxMap=00 Should i update the user_config.json with these values ? [Yy/Nn] n OK remember to update manually by editing user_config.json file tc@box:~$ exit In fact, the model is Controladora Fujitsu Lsi 9211-8i Model: D2607-a21. Is that error means that my HBA is not been recognised? 5 of 6 HDD on HBA is been shown on DSM.

Did you solve this problem?

I try to edit config.json, but SataPortMap and DiskIdxMap are blank: SataPortMap = " " DiskIdxMap ->nothing is written So, how can I set more disks to my box without mess things up?

@Peter Suh Edit SataMap to change number of sata ports: is it necessary to boot the box on m-shell instance and connect via SSH?

I have a box (3622xs+ on USB drive) with 10 (1TG each) disks. 5 of it are connected to MB and the other 5 are connecte to a HBA (Fujitsu Lsi 9211-8i Modelo: D2607-a21). I put a SSD for cache and DSM simple disable onde of the HDD and enable the SSD, messing up with my Volume (it get degrade). I do not know much about linux, only a few commands. Is there a way to rebuild the sata map without loose everything?

Is it possible to change the CPU of your server? Look at here about CPU upgrade.

I put Fujitsu Lsi 9211-8i on my box and it worked without rebuild the loader.

Any one can help me with this one? Does Fujitsu Lsi 9211-8i Modelo: D2607-a21 works on DSM7.2?

I would like to know if I replace a simple PCI-sata card for a new HBA i have to rebuild the loader. If so, how can I avoid "it seams that you move your disks to another hardware".... message and operation. Best regards.

Hi there, I made VM to work in Intel and AMD platform. On Intel, MB Asus B85 with Intel Xeon E3-1240L v3 I could get VM to work with 3622xs+ and M-shell loader. On AMD, M5A78L-M LX/BR, with Phenom II X4, I could only make VM to work with SA6400. (I get the same message ""Failed to power on the virtual machine") if I do with 3622xs+ on this platform.) with M-shell loader. And remember, 95% of Synology hardware has expansion ports, this meas the DS923+ can go up to 9 bays. I do not know how this works on the loader, but it is a thought.

With arc-24.1.14f.vmdk-flat I do not get SAN Manager corrupted any way.

I manage to go up to update 6 on 7.1. and I did not get any corruption of SAN Manager using TCRP by Pocopico. I could not install 7.2 using it, so I went back to M-Shell and install 7.1. lets see, but it fail. With M-SHELL my NIC get lock and no connection is allow. I try 7.2.0 and also got lockout. I went to arc-24.1.14f.vmdk-flat and so far, with DSM7.2 I do not get SAN Manager any error. I went to all process of ARC, but before reboot, I had to change MAC address because it seams that this loader is not capable of get real MAC (at least I dfo not know how to do it), so I had to type on config.json.