jollmo Posted July 8, 2023 Share #2226 Posted July 8, 2023 (edited) I just changed from ARPL to ARPL-18n and updatet from latest 7.1 to 7.2 in 7.2, everything works good so far (haven't tested every bit) but I found resource monitor not working: Every field is empty, nothing is monitored. (in the Info Center under System, CPU info, cores, freq, memory and even thermal status are reported correctly) Anything I could have missed while building the loader? Bildschirmfoto 2023-07-08 um 13.09.06.pdf Bildschirmfoto 2023-07-08 um 13.09.20.pdf My install is baremetal on a TX5240 M1 3622xs+ Edited July 8, 2023 by jollmo Quote Link to comment Share on other sites More sharing options...
Rick4 Posted July 8, 2023 Share #2227 Posted July 8, 2023 20 hours ago, Rick4 said: tried "pciconfig -lv" command, ang get that lines: Tried to burn ARC loader to a 60GB Corsair SSD, set it to an old ITX motherboard, it can boot very fast: Quote Link to comment Share on other sites More sharing options...
Rick4 Posted July 8, 2023 Share #2228 Posted July 8, 2023 (edited) 2 minutes ago, Rick4 said: Tried to burn ARC loader to a 60GB Corsair SSD, set it to an old ITX motherboard, it can boot very fast: And after that SSD pulled out, push back to newest topton mini pc, set all, booted, looks like all same, loader shows IP address, but never can reach through browser or syno assistant.. Edited July 8, 2023 by Rick4 Quote Link to comment Share on other sites More sharing options...
Rick4 Posted July 8, 2023 Share #2229 Posted July 8, 2023 3 hours ago, Rick4 said: And after that SSD pulled out, push back to newest topton mini pc, set all, booted, looks like all same, loader shows IP address, but never can reach through browser or syno assistant.. So looks like loader works without any issues, i found server with advanced ip scanner, can browse folders, but disappears after build loader and trying to start. Quote Link to comment Share on other sites More sharing options...
dejimmy Posted July 8, 2023 Share #2230 Posted July 8, 2023 I would like to replace loader arpl 1.1beta2 with arpl ln18. I'm on dsm 7.1.1-42962 update 6. I don't like to reinstall dsm and lose data,sertings and packages. If I create loader to new usb and choose same model and build number will I be able to direct boot to same dsm with same settings and packages as before? Quote Link to comment Share on other sites More sharing options...
Randomized Posted July 8, 2023 Share #2231 Posted July 8, 2023 3 hours ago, dejimmy said: I would like to replace loader arpl 1.1beta2 with arpl ln18. I'm on dsm 7.1.1-42962 update 6. I don't like to reinstall dsm and lose data,sertings and packages. If I create loader to new usb and choose same model and build number will I be able to direct boot to same dsm with same settings and packages as before? Yes, just make a new disk with aARPL-18n, build loader, boot loader and you are good to go. I just did it, it had to 'migrate' upon booting 7.2.2 though, everything went fine. Tbh I was just so angry I had to make a new bootloader again, because I thought the arpl 1.1beta2 was going to manage it well, unfortunately it doesn't work with the new DSM versions. Quote Link to comment Share on other sites More sharing options...
Peter Suh Posted July 9, 2023 Share #2232 Posted July 9, 2023 3 hours ago, Randomized said: Yes, just make a new disk with aARPL-18n, build loader, boot loader and you are good to go. I just did it, it had to 'migrate' upon booting 7.2.2 though, everything went fine. Tbh I was just so angry I had to make a new bootloader again, because I thought the arpl 1.1beta2 was going to manage it well, unfortunately it doesn't work with the new DSM versions. fabio left the message below on April 7th. fabio's original ARPL has v1.1-beta2a and is no longer being developed. This version is only supported up to DSM 7.1. Quote Link to comment Share on other sites More sharing options...
dejimmy Posted July 9, 2023 Share #2233 Posted July 9, 2023 6 hours ago, Randomized said: Yes, just make a new disk with aARPL-18n, build loader, boot loader and you are good to go. I just did it, it had to 'migrate' upon booting 7.2.2 though, everything went fine. Tbh I was just so angry I had to make a new bootloader again, because I thought the arpl 1.1beta2 was going to manage it well, unfortunately it doesn't work with the new DSM versions. I've already tried. But I got this. I believe "recover" will only recover files and that I have to get message "migrate"? Quote Link to comment Share on other sites More sharing options...
Randomized Posted July 9, 2023 Share #2234 Posted July 9, 2023 14 hours ago, dejimmy said: I've already tried. But I got this. I believe "recover" will only recover files and that I have to get message "migrate"? You are good to go, i had to do a 'recover' too. Just make sure you're using the same model (ds920+), sn and mac, and just press recover. Quote Link to comment Share on other sites More sharing options...
dejimmy Posted July 10, 2023 Share #2235 Posted July 10, 2023 Should it be the same sn? Quote Link to comment Share on other sites More sharing options...
Randomized Posted July 10, 2023 Share #2236 Posted July 10, 2023 15 hours ago, dejimmy said: Should it be the same sn? Only if you had AME and want it to keep it working. Otherwise no. Quote Link to comment Share on other sites More sharing options...
BobC Posted July 13, 2023 Share #2237 Posted July 13, 2023 On 7/8/2023 at 4:57 PM, Randomized said: Yes, just make a new disk with aARPL-18n, build loader, boot loader and you are good to go. I just did it, it had to 'migrate' upon booting 7.2.2 though, everything went fine. Tbh I was just so angry I had to make a new bootloader again, because I thought the arpl 1.1beta2 was going to manage it well, unfortunately it doesn't work with the new DSM versions. Where is ARPL-18n? Quote Link to comment Share on other sites More sharing options...
BobC Posted July 13, 2023 Share #2238 Posted July 13, 2023 37 minutes ago, BobC said: Where is ARPL-18n? Never mind. I found it here: https://github.com/wjz304/arpl-i18n Quote Link to comment Share on other sites More sharing options...
Optiplex_Fan Posted July 16, 2023 Share #2239 Posted July 16, 2023 (edited) Well, I don't know what to think after that full day spent understanding what happens. Yesterday I installed ARPL-i18n and it worked out of the box using DS923+ on a i5-10500 CPU (Optiplex 5080) Wanting to enable Hardware transcoding with patched i915 (which never worked, I must miss something), I realized that maybe the AMD based DS was not shipped with the i915 drivers and changed to DS920+ in the loader. From there, started a full day of black screen ... the loader loads and after the installation of DSM and its reboot, the screen goes black, it doesn't display the loader typical information. I formatted the drives and used DS918+, same deal. I changed loader to the original ARPL, formatted drives, same deal. I changed loader to ARC, ... same black screen went back to DS923+ on ARPL-i18n and it worked again. So what is it ?? Also, would I be able to enable HW transcoding ? Thanks a lot Edited July 16, 2023 by Optiplex_Fan Quote Link to comment Share on other sites More sharing options...
rok1 Posted July 18, 2023 Share #2240 Posted July 18, 2023 On 7/15/2023 at 6:22 PM, Optiplex_Fan said: Wanting to enable Hardware transcoding with patched i915 (which never worked, I must miss something), I realized that maybe the AMD based DS was not shipped with the i915 drivers and changed to DS920+ in the loader. From there, started a full day of black screen ... the loader loads and after the installation of DSM and its reboot, the screen goes black, it doesn't display the loader typical information. I formatted the drives and used DS918+, same deal. I changed loader to the original ARPL, formatted drives, same deal. I changed loader to ARC, ... same black screen went back to DS923+ on ARPL-i18n and it worked again. So what is it ?? Also, would I be able to enable HW transcoding ? Thanks a lot The screen will turn off on a connected monitor when the video driver is loaded properly. This may be what happens in your case. Have you tried connecting via network? Quote Link to comment Share on other sites More sharing options...
htpcdude Posted July 19, 2023 Share #2241 Posted July 19, 2023 On 7/8/2023 at 7:57 PM, Randomized said: Yes, just make a new disk with aARPL-18n, build loader, boot loader and you are good to go. I just did it, it had to 'migrate' upon booting 7.2.2 though, everything went fine. Tbh I was just so angry I had to make a new bootloader again, because I thought the arpl 1.1beta2 was going to manage it well, unfortunately it doesn't work with the new DSM versions. You were angry? The developers here do so much work getting this working for our benefit. If you don't like it then please make your own loader. 4 Quote Link to comment Share on other sites More sharing options...
Optiplex_Fan Posted July 19, 2023 Share #2242 Posted July 19, 2023 Le 17/07/2023 à 22:33, rok1 a dit : The screen will turn off on a connected monitor when the video driver is loaded properly. This may be what happens in your case. Have you tried connecting via network? Yes, I've noticed that on my i5-8500 which is managed properly with the i915 driver. Though, for the Optiplex with the i5-10500, the screen turns black, but I can no longer access it through the network. nothing happens... the arp -a command no longer reports its MAC address on the network (I disabled hyper threading in BIOS, so the 920+ should not pose any problem with more threads than expected). I'm really puzzled as why it does that. I wish I could attach a terminal and see the logs while it boots... For now, I'll stick with the i5-8500, though I wish to switch to the i5-10500 which is a bit more powerful, though, realistically, not really making this much of a difference between the two. Quote Link to comment Share on other sites More sharing options...
dmankl Posted July 20, 2023 Share #2243 Posted July 20, 2023 Hello all, I am trying to set up a VM using ARPL on esxi 7.0 u3 with a lsi card and from what I have read I need the mpt3sas addon but I am unsure of how to add it to the build. Can someone help withthis? Quote Link to comment Share on other sites More sharing options...
BartAcid Posted July 22, 2023 Share #2244 Posted July 22, 2023 Did you check in loader builder what modules are included? Now i'm testing arpl-i18n and mpt3sas is on the list. You just have to mark it to includ to loader. Than rebuild loader. I have another question. Did any one try to instal DS423+ and use m.2 disk as storage? I'm in vbox and i can only make ssd cache on m.2 disk. Quote Link to comment Share on other sites More sharing options...
dmankl Posted July 23, 2023 Share #2245 Posted July 23, 2023 I found that out so I learned that I am having issues seeing the drives after its installed, not sure why though. I created a VM in ESXI with a HBA and I tried a variety of models and versions and the DS918+ and DS1819+ seemed to work better than the others. The only NVME's in my system is ESXI File stores I do have 2 Sata SSDs which I plan to use as read write cache... I know its not NVME speed but I figure it should help even ifits a little Quote Link to comment Share on other sites More sharing options...
BartAcid Posted July 24, 2023 Share #2246 Posted July 24, 2023 I'm going to change my setup becouse Z230 has problem with WOL. Z240 have m.2 port, i think to switch from DS918+ to DS423+. I use SSD storage for VM's mostly. Quote Link to comment Share on other sites More sharing options...
mar1boro Posted July 24, 2023 Share #2247 Posted July 24, 2023 (edited) Have anyone succeeded in making m2 ssd storage pool? Tried to install 923+ device on baremetal: m2 drives are visible but can be used for cache only. The same thing is for 920 install. Edited July 24, 2023 by mar1boro 1 Quote Link to comment Share on other sites More sharing options...
blindspot Posted July 25, 2023 Share #2248 Posted July 25, 2023 On 7/24/2023 at 10:36 PM, mar1boro said: Have anyone succeeded in making m2 ssd storage pool? Tried to install 923+ device on baremetal: m2 drives are visible but can be used for cache only. The same thing is for 920 install. https://github.com/007revad/Synology_M2_volume 2 Quote Link to comment Share on other sites More sharing options...
ngucy5767 Posted July 26, 2023 Share #2249 Posted July 26, 2023 Guys, i was updated 64570 update-2 version via manual update on GUI. 1 Quote Link to comment Share on other sites More sharing options...
TonyF Posted July 27, 2023 Share #2250 Posted July 27, 2023 I try 7.2 64570 update-2 with DS2422+ & DS1621+ , both can't use nvme. did't show in Storage Manager. I can use nvme on 7.1. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.