Automated RedPill Loader (ARPL)

[apriliars3]

I am testing ARPL v1.1-beta1 on Proxmox and I don´t get IP with boot the loader. I think freeze after this capture. I tried with Junior Mode addon and show me DSM login but not IP too. Is there any fix it for this issue? 

 

 

 

 

 

50,io,0x3f8,115200n8 root=/dev/md0 loglevel=15 log_buf_len=32M syno_hw_version=DS3622xs+ netif_num=1 pid=0x0001 mac1=baeb3518a950 sn=2150SQRAAS6VN vid=0x46f4 elevator=elevator HddHotplug=0 syno_hdd_detect=0 vender_format_version=2 syno_hdd_powerup_seq=0
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000] x86/fpu: Legacy x87 FPU detected.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000400-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ffd4fff] usable
[    0.000000] BIOS-e820: [mem 0x000000007ffd5000-0x000000007fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000b0000000-0x00000000bfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[    0.000000] earlycon: Early serial console at I/O port 0x3f8 (options '115200n8')
[    0.000000] bootconsole [uart0] enabled
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.8 present.
[    0.000000] DMI: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
[    0.000000] Kernel/User page tables isolation: disabled
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x7ffd5 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: write-back
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 00C0000000 mask FFC0000000 uncachable
[    0.000000]   1 disabled
[    0.000000]   2 disabled
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- UC  
[    0.000000] found SMP MP-table at [mem 0x000f5b50-0x000f5b5f] mapped at [ffff8800000f5b50]
[    0.000000] Base memory trampoline at [ffff880000098000] 98000 size 28672
[    0.000000] BRK [0x7cd55000, 0x7cd55fff] PGTABLE
[    0.000000] BRK [0x7cd56000, 0x7cd56fff] PGTABLE
[    0.000000] BRK [0x7cd57000, 0x7cd57fff] PGTABLE
[    0.000000] BRK [0x7cd58000, 0x7cd58fff] PGTABLE
[    0.000000] BRK [0x7cd59000, 0x7cd59fff] PGTABLE
[    0.000000] log_buf_len: 33554432 bytes
[    0.000000] early log buf free: 1045408(99%)
[    0.000000] RAMDISK: [mem 0x762f6000-0x7c1fffff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F5980 000014 (v00 BOCHS )
[    0.000000] ACPI: RSDT 0x000000007FFE4A7C 00003C (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.000000] ACPI: FACP 0x000000007FFE47A2 0000F4 (v03 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.000000] ACPI: DSDT 0x000000007FFDF040 005762 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.000000] ACPI: FACS 0x000000007FFDF000 000040
[    0.000000] ACPI: APIC 0x000000007FFE4896 000080 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.000000] ACPI: SSDT 0x000000007FFE4916 0000CA (v01 BOCHS  VMGENID  00000001 BXPC 00000001)
[    0.000000] ACPI: HPET 0x000000007FFE49E0 000038 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.000000] ACPI: MCFG 0x000000007FFE4A18 00003C (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.000000] ACPI: WAET 0x000000007FFE4A54 000028 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x000000007ffd4fff]
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x000000007ffd4fff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000007ffd4fff]
[    0.000000] On node 0 totalpages: 524147
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 22 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 8128 pages used for memmap
[    0.000000]   DMA32 zone: 520149 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x608
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ5 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] ACPI: IRQ10 used by override.
[    0.000000] ACPI: IRQ11 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[    0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[    0.000000] e820: [mem 0xc0000000-0xfed1bfff] available for PCI devices
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[    0.000000] setup_percpu: NR_CPUS:24 nr_cpumask_bits:24 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] PERCPU: Embedded 33 pages/cpu @ffff88007dc00000 s95192 r8192 d31784 u1048576
[    0.000000] pcpu-alloc: s95192 r8192 d31784 u1048576 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 515933
[    0.000000] Kernel command line: noefi console=ttyS0,115200n8 earlyprintk earlycon=uart8250,io,0x3f8,115200n8 root=/dev/md0 loglevel=15 log_buf_len=32M syno_hw_version=DS3622xs+ netif_num=1 pid=0x0001 mac1=baeb3518a950 sn=2150SQRAAS6VN vid=0x46f4 elevator=elevator HddHotplug=0 syno_hdd_detect=0 vender_format_version=2 syno_hdd_powerup_seq=0
[    0.000000] Synology Hardware Version: DS3622xs+
[    0.000000] Internal netif num: 1
[    0.000000] Mac1: baeb3518a950
[    0.000000] Serial Number: 2150SQRAAS6VN
[    0.000000] SYNO GPIO HDD detect pin: 0
[    0.000000] Vender format version: 2
[    0.000000] Power on seq num: 0
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.000000] Memory: 1918572K/2096588K available (5548K kernel code, 880K rwdata, 1780K rodata, 924K init, 1568K bss, 178016K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000]  Build-time adjustment of leaf fanout to 64.
[    0.000000]  RCU restricting CPUs from NR_CPUS=24 to nr_cpu_ids=2.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=2
[    0.000000] NR_IRQS:4352 nr_irqs:440 16
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [ttyS0] enabled
[    0.000000] console [ttyS0] enabled
[    0.000000] bootconsole [uart0] disabled
[    0.000000] bootconsole [uart0] disabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 3292.656 MHz processor
[    0.003009] Calibrating delay loop (skipped), value calculated using timer frequency.. 6585.31 BogoMIPS (lpj=3292656)
[    0.005011] pid_max: default: 32768 minimum: 301
[    0.006020] ACPI: Core revision 20150930
[    0.009844] ACPI: 2 ACPI AML tables successfully acquired and loaded
[    0.011107] Security Framework initialized
[    0.012018] AppArmor: AppArmor initialized
[    0.013011] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
[    0.014009] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
[    0.016077] Initializing cgroup subsys io
[    0.017015] Initializing cgroup subsys memory
[    0.018023] Initializing cgroup subsys devices
[    0.019019] Initializing cgroup subsys freezer
[    0.020077] CPU: Physical Processor ID: 0
[    0.021005] CPU: Processor Core ID: 0
[    0.022129] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[    0.023006] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[    0.024013] Speculative Store Bypass: Vulnerable
[    0.027416] Freeing SMP alternatives memory: 24K
[    0.029051] x2apic: IRQ remapping doesn't support X2APIC mode
[    0.032528] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.043000] smpboot: CPU0: Intel Common KVM processor (family: 0xf, model: 0x6, stepping: 0x1)
[    0.044021] Performance Events: unsupported Netburst CPU model 6 no PMU driver, software events only.
[    0.047027] NMI watchdog: disabled (cpu0): hardware events not enabled
[    0.048002] NMI watchdog: Shutting down hard lockup detector on all cpus
[    0.049098] x86: Booting SMP configuration:
[    0.050003] .... node  #0, CPUs:      #1
[    0.064044] x86: Booted up 1 node, 2 CPUs
[    0.065004] smpboot: Total of 2 processors activated (13170.62 BogoMIPS)
[    0.067045] devtmpfs: initialized
[    0.068465] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[    0.069042] futex hash table entries: 512 (order: 3, 32768 bytes)
[    0.070073] NET: Registered protocol family 16
[    0.075008] cpuidle: using governor ladder
[    0.081009] cpuidle: using governor menu
[    0.082092] ACPI: bus type PCI registered
[    0.083170] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xb0000000-0xbfffffff] (base 0xb0000000)
[    0.086006] PCI: MMCONFIG at [mem 0xb0000000-0xbfffffff] reserved in E820
[    0.088176] PCI: Using configuration type 1 for base access
[    0.096104] ACPI: Added _OSI(Module Device)
[    0.096104] ACPI: Added _OSI(Processor Device)
[    0.096104] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.096104] ACPI: Added _OSI(Processor Aggregator Device)
[    0.099390] ACPI: Interpreter enabled
[    0.100027] ACPI: (supports S0 S4 S5)
[    0.101003] ACPI: Using IOAPIC for interrupt routing
[    0.103065] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.115495] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.117014] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.119083] acpi PNP0A08:00: _OSC: OS now controls [PME AER PCIeCapability]
[    0.121079] PCI host bridge to bus 0000:00
[    0.122004] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.123005] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.125004] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.127004] pci_bus 0000:00: root bus resource [mem 0x80000000-0xafffffff window]
[    0.129004] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window]
[    0.130004] pci_bus 0000:00: root bus resource [mem 0x100000000-0x8ffffffff window]
[    0.132005] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.134069] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000
[    0.136001] pci 0000:00:01.0: [1234:1111] type 00 class 0x030000
[    0.140031] pci 0000:00:01.0: reg 0x10: [mem 0xfb000000-0xfbffffff pref]
[    0.145792] pci 0000:00:01.0: reg 0x18: [mem 0xfea18000-0xfea18fff]
[    0.154030] pci 0000:00:01.0: reg 0x30: [mem 0xfea00000-0xfea0ffff pref]
[    0.156294] pci 0000:00:02.0: [1033:0194] type 00 class 0x0c0330
[    0.158006] pci 0000:00:02.0: reg 0x10: [mem 0xfea10000-0xfea13fff 64bit]
[    0.163702] pci 0000:00:1a.0: [8086:2937] type 00 class 0x0c0300
[    0.168381] pci 0000:00:1a.0: reg 0x20: [io  0x5040-0x505f]
[    0.172233] pci 0000:00:1a.1: [8086:2938] type 00 class 0x0c0300
[    0.176811] pci 0000:00:1a.1: reg 0x20: [io  0x5060-0x507f]
[    0.180015] pci 0000:00:1a.2: [8086:2939] type 00 class 0x0c0300
[    0.184949] pci 0000:00:1a.2: reg 0x20: [io  0x5080-0x509f]
[    0.187499] pci 0000:00:1a.7: [8086:293c] type 00 class 0x0c0320
[    0.189651] pci 0000:00:1a.7: reg 0x10: [mem 0xfea19000-0xfea19fff]
[    0.196001] pci 0000:00:1b.0: [8086:293e] type 00 class 0x040300
[    0.198268] pci 0000:00:1b.0: reg 0x10: [mem 0xfea14000-0xfea17fff]
[    0.203547] pci 0000:00:1c.0: [1b36:000c] type 01 class 0x060400
[    0.207499] pci 0000:00:1c.0: reg 0x10: [mem 0xfea1a000-0xfea1afff]
[    0.211540] pci 0000:00:1c.1: [1b36:000c] type 01 class 0x060400
[    0.214008] pci 0000:00:1c.1: reg 0x10: [mem 0xfea1b000-0xfea1bfff]
[    0.219225] pci 0000:00:1c.2: [1b36:000c] type 01 class 0x060400
[    0.221523] pci 0000:00:1c.2: reg 0x10: [mem 0xfea1c000-0xfea1cfff]
[    0.226001] pci 0000:00:1c.3: [1b36:000c] type 01 class 0x060400
[    0.229528] pci 0000:00:1c.3: reg 0x10: [mem 0xfea1d000-0xfea1dfff]
[    0.234013] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300
[    0.237782] pci 0000:00:1d.0: reg 0x20: [io  0x50a0-0x50bf]
[    0.242001] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300
[    0.245485] pci 0000:00:1d.1: reg 0x20: [io  0x50c0-0x50df]
[    0.248179] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300
[    0.253480] pci 0000:00:1d.2: reg 0x20: [io  0x50e0-0x50ff]
[    0.256001] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320
[    0.257567] pci 0000:00:1d.7: reg 0x10: [mem 0xfea1e000-0xfea1efff]
[    0.264142] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[    0.268001] pci 0000:00:1f.0: [8086:2918] type 00 class 0x060100
[    0.270247] pci 0000:00:1f.0: quirk: [io  0x0600-0x067f] claimed by ICH6 ACPI/GPIO/TCO
[    0.272001] pci 0000:00:1f.2: [8086:2922] type 00 class 0x010601
[    0.278008] pci 0000:00:1f.2: reg 0x20: [io  0x5100-0x511f]
[    0.280484] pci 0000:00:1f.2: reg 0x24: [mem 0xfea1f000-0xfea1ffff]
[    0.284001] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500
[    0.289238] pci 0000:00:1f.3: reg 0x20: [io  0x0700-0x073f]
[    0.292205] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.294047] pci 0000:00:1c.0:   bridge window [io  0x6000-0x6fff]
[    0.295040] pci 0000:00:1c.0:   bridge window [mem 0xfe800000-0xfe9fffff]
[    0.299070] pci 0000:00:1c.0:   bridge window [mem 0xfce00000-0xfcffffff 64bit pref]
[    0.301129] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    0.304109] pci 0000:00:1c.1:   bridge window [io  0x7000-0x7fff]
[    0.308007] pci 0000:00:1c.1:   bridge window [mem 0xfe600000-0xfe7fffff]
[    0.312144] pci 0000:00:1c.1:   bridge window [mem 0xfcc00000-0xfcdfffff 64bit pref]
[    0.317004] pci 0000:00:1c.2: PCI bridge to [bus 03]
[    0.317022] pci 0000:00:1c.2:   bridge window [io  0x8000-0x8fff]
[    0.320046] pci 0000:00:1c.2:   bridge window [mem 0xfe400000-0xfe5fffff]
[    0.322071] pci 0000:00:1c.2:   bridge window [mem 0xfca00000-0xfcbfffff 64bit pref]
[    0.326002] pci 0000:00:1c.3: PCI bridge to [bus 04]
[    0.327042] pci 0000:00:1c.3:   bridge window [io  0x9000-0x9fff]
[    0.329039] pci 0000:00:1c.3:   bridge window [mem 0xfe200000-0xfe3fffff]
[    0.331069] pci 0000:00:1c.3:   bridge window [mem 0xfc800000-0xfc9fffff 64bit pref]
[    0.334213] pci 0000:05:01.0: [1b36:0001] type 01 class 0x060400
[    0.336578] pci 0000:05:01.0: reg 0x10: [mem 0xfe000000-0xfe0000ff 64bit]
[    0.340481] pci 0000:05:02.0: [1b36:0001] type 01 class 0x060400
[    0.343008] pci 0000:05:02.0: reg 0x10: [mem 0xfe001000-0xfe0010ff 64bit]
[    0.346560] pci 0000:05:03.0: [1b36:0001] type 01 class 0x060400
[    0.350008] pci 0000:05:03.0: reg 0x10: [mem 0xfe002000-0xfe0020ff 64bit]
[    0.353515] pci 0000:05:04.0: [1b36:0001] type 01 class 0x060400
[    0.356008] pci 0000:05:04.0: reg 0x10: [mem 0xfe003000-0xfe0030ff 64bit]
[    0.361002] pci 0000:00:1e.0: PCI bridge to [bus 05-09] (subtractive decode)
[    0.363031] pci 0000:00:1e.0:   bridge window [io  0x1000-0x4fff]
[    0.365023] pci 0000:00:1e.0:   bridge window [mem 0xfd800000-0xfe1fffff]
[    0.367053] pci 0000:00:1e.0:   bridge window [mem 0xfc000000-0xfc7fffff 64bit pref]
[    0.369004] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
[    0.371004] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    0.373004] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    0.375004] pci 0000:00:1e.0:   bridge window [mem 0x80000000-0xafffffff window] (subtractive decode)
[    0.378004] pci 0000:00:1e.0:   bridge window [mem 0xc0000000-0xfebfffff window] (subtractive decode)
[    0.380004] pci 0000:00:1e.0:   bridge window [mem 0x100000000-0x8ffffffff window] (subtractive decode)
[    0.383163] pci 0000:06:03.0: [1af4:1002] type 00 class 0x00ff00
[    0.386008] pci 0000:06:03.0: reg 0x10: [io  0x4000-0x403f]
[    0.392008] pci 0000:06:03.0: reg 0x20: [mem 0xfc600000-0xfc603fff 64bit pref]
[    0.396013] pci 0000:06:07.0: [8086:2922] type 00 class 0x010601
[    0.402008] pci 0000:06:07.0: reg 0x20: [io  0x4080-0x409f]
[    0.406468] pci 0000:06:07.0: reg 0x24: [mem 0xfde60000-0xfde60fff]
[    0.410001] pci 0000:06:12.0: [8086:100e] type 00 class 0x020000
[    0.414537] pci 0000:06:12.0: reg 0x10: [mem 0xfde40000-0xfde5ffff]
[    0.417516] pci 0000:06:12.0: reg 0x14: [io  0x4040-0x407f]
[    0.424008] pci 0000:06:12.0: reg 0x30: [mem 0xfde00000-0xfde3ffff pref]
[    0.428001] pci 0000:05:01.0: PCI bridge to [bus 06]
[    0.429040] pci 0000:05:01.0:   bridge window [io  0x4000-0x4fff]
[    0.431039] pci 0000:05:01.0:   bridge window [mem 0xfde00000-0xfdffffff]
[    0.433070] pci 0000:05:01.0:   bridge window [mem 0xfc600000-0xfc7fffff 64bit pref]
[    0.437263] pci 0000:05:02.0: PCI bridge to [bus 07]
[    0.438027] pci 0000:05:02.0:   bridge window [io  0x3000-0x3fff]
[    0.440013] pci 0000:05:02.0:   bridge window [mem 0xfdc00000-0xfddfffff]
[    0.442041] pci 0000:05:02.0:   bridge window [mem 0xfc400000-0xfc5fffff 64bit pref]
[    0.444491] pci 0000:05:03.0: PCI bridge to [bus 08]
[    0.446040] pci 0000:05:03.0:   bridge window [io  0x2000-0x2fff]
[    0.448040] pci 0000:05:03.0:   bridge window [mem 0xfda00000-0xfdbfffff]
[    0.450075] pci 0000:05:03.0:   bridge window [mem 0xfc200000-0xfc3fffff 64bit pref]
[    0.453212] pci 0000:05:04.0: PCI bridge to [bus 09]
[    0.454028] pci 0000:05:04.0:   bridge window [io  0x1000-0x1fff]
[    0.456023] pci 0000:05:04.0:   bridge window [mem 0xfd800000-0xfd9fffff]
[    0.457041] pci 0000:05:04.0:   bridge window [mem 0xfc000000-0xfc1fffff 64bit pref]
[    0.464528] pci_bus 0000:00: on NUMA node 0
[    0.466106] pci 0000:00:1c.0: Max Payload Size set to  128/ 128 (was  128), Max Read Rq  128
[    0.469060] pci 0000:00:1c.1: Max Payload Size set to  128/ 128 (was  128), Max Read Rq  128
[    0.471052] pci 0000:00:1c.2: Max Payload Size set to  128/ 128 (was  128), Max Read Rq  128
[    0.473051] pci 0000:00:1c.3: Max Payload Size set to  128/ 128 (was  128), Max Read Rq  128
[    0.476028] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11), disabled.
[    0.478041] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11), disabled.
[    0.479129] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11), disabled.
[    0.480368] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11), disabled.
[    0.481466] ACPI: PCI Interrupt Link [LNKE] (IRQs 5 *10 11), disabled.
[    0.483172] ACPI: PCI Interrupt Link [LNKF] (IRQs 5 *10 11), disabled.
[    0.485166] ACPI: PCI Interrupt Link [LNKG] (IRQs 5 10 *11), disabled.
[    0.487460] ACPI: PCI Interrupt Link [LNKH] (IRQs 5 10 *11), disabled.
[    0.489446] ACPI: PCI Interrupt Link [GSIA] (IRQs *16)
[    0.491007] ACPI: PCI Interrupt Link [GSIB] (IRQs *17)
[    0.492231] ACPI: PCI Interrupt Link [GSIC] (IRQs *18)
[    0.494243] ACPI: PCI Interrupt Link [GSID] (IRQs *19)
[    0.495249] ACPI: PCI Interrupt Link [GSIE] (IRQs *20)
[    0.497227] ACPI: PCI Interrupt Link [GSIF] (IRQs *21)
[    0.498232] ACPI: PCI Interrupt Link [GSIG] (IRQs *22)
[    0.499257] ACPI: PCI Interrupt Link [GSIH] (IRQs *23)
[    0.502099] ACPI: Enabled 3 GPEs in block 00 to 3F
[    0.503319] vgaarb: setting as boot device: PCI:0000:00:01.0
[    0.504000] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
[    0.507015] vgaarb: loaded
[    0.508003] vgaarb: bridge control possible 0000:00:01.0
[    0.510021] SCSI subsystem initialized
[    0.511147] libata version 3.00 loaded.
[    0.512100] pps_core: LinuxPPS API ver. 1 registered
[    0.513019] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.515040] PTP clock support registered
[    0.516117] EDAC MC: Ver: 3.0.0
[    0.518219] PCI: Using ACPI for IRQ routing
[    0.582392] PCI: pci_cache_line_size set to 64 bytes
[    0.584434] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[    0.586011] e820: reserve RAM buffer [mem 0x7ffd5000-0x7fffffff]
[    0.588175] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.591074] clocksource: Switched to clocksource hpet
[    0.598740] AppArmor: AppArmor Filesystem Enabled
[    0.600140] pnp: PnP ACPI init
[    0.601105] pnp 00:00: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.602901] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.604694] pnp 00:02: Plug and Play ACPI device, IDs PNP0f13 (active)
[    0.606485] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.608384] system 00:04: [mem 0xb0000000-0xbfffffff window] has been reserved
[    0.610314] system 00:04: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.612310] pnp: PnP ACPI: found 5 devices
[    0.621163] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.631179] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.632561] pci 0000:00:1c.0:   bridge window [io  0x6000-0x6fff]
[    0.636546] pci 0000:00:1c.0:   bridge window [mem 0xfe800000-0xfe9fffff]
[    0.638936] pci 0000:00:1c.0:   bridge window [mem 0xfce00000-0xfcffffff 64bit pref]
[    0.642268] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    0.643637] pci 0000:00:1c.1:   bridge window [io  0x7000-0x7fff]
[    0.646188] pci 0000:00:1c.1:   bridge window [mem 0xfe600000-0xfe7fffff]
[    0.648945] pci 0000:00:1c.1:   bridge window [mem 0xfcc00000-0xfcdfffff 64bit pref]
[    0.652234] pci 0000:00:1c.2: PCI bridge to [bus 03]
[    0.653582] pci 0000:00:1c.2:   bridge window [io  0x8000-0x8fff]
[    0.656176] pci 0000:00:1c.2:   bridge window [mem 0xfe400000-0xfe5fffff]
[    0.659264] pci 0000:00:1c.2:   bridge window [mem 0xfca00000-0xfcbfffff 64bit pref]
[    0.662397] pci 0000:00:1c.3: PCI bridge to [bus 04]
[    0.663685] pci 0000:00:1c.3:   bridge window [io  0x9000-0x9fff]
[    0.666202] pci 0000:00:1c.3:   bridge window [mem 0xfe200000-0xfe3fffff]
[    0.669231] pci 0000:00:1c.3:   bridge window [mem 0xfc800000-0xfc9fffff 64bit pref]
[    0.672477] pci 0000:05:01.0: PCI bridge to [bus 06]
[    0.673759] pci 0000:05:01.0:   bridge window [io  0x4000-0x4fff]
[    0.676305] pci 0000:05:01.0:   bridge window [mem 0xfde00000-0xfdffffff]
[    0.679327] pci 0000:05:01.0:   bridge window [mem 0xfc600000-0xfc7fffff 64bit pref]
[    0.682545] pci 0000:05:02.0: PCI bridge to [bus 07]
[    0.683834] pci 0000:05:02.0:   bridge window [io  0x3000-0x3fff]
[    0.686298] pci 0000:05:02.0:   bridge window [mem 0xfdc00000-0xfddfffff]
[    0.688681] pci 0000:05:02.0:   bridge window [mem 0xfc400000-0xfc5fffff 64bit pref]
[    0.692466] pci 0000:05:03.0: PCI bridge to [bus 08]
[    0.693680] pci 0000:05:03.0:   bridge window [io  0x2000-0x2fff]
[    0.696566] pci 0000:05:03.0:   bridge window [mem 0xfda00000-0xfdbfffff]
[    0.698599] pci 0000:05:03.0:   bridge window [mem 0xfc200000-0xfc3fffff 64bit pref]
[    0.702391] pci 0000:05:04.0: PCI bridge to [bus 09]
[    0.703598] pci 0000:05:04.0:   bridge window [io  0x1000-0x1fff]
[    0.705917] pci 0000:05:04.0:   bridge window [mem 0xfd800000-0xfd9fffff]
[    0.708134] pci 0000:05:04.0:   bridge window [mem 0xfc000000-0xfc1fffff 64bit pref]
[    0.711817] pci 0000:00:1e.0: PCI bridge to [bus 05-09]
[    0.713178] pci 0000:00:1e.0:   bridge window [io  0x1000-0x4fff]
[    0.715673] pci 0000:00:1e.0:   bridge window [mem 0xfd800000-0xfe1fffff]
[    0.718321] pci 0000:00:1e.0:   bridge window [mem 0xfc000000-0xfc7fffff 64bit pref]
[    0.722206] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.724099] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.725994] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.728166] pci_bus 0000:00: resource 7 [mem 0x80000000-0xafffffff window]
[    0.730242] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xfebfffff window]
[    0.732372] pci_bus 0000:00: resource 9 [mem 0x100000000-0x8ffffffff window]
[    0.734598] pci_bus 0000:01: resource 0 [io  0x6000-0x6fff]
[    0.736313] pci_bus 0000:01: resource 1 [mem 0xfe800000-0xfe9fffff]
[    0.738260] pci_bus 0000:01: resource 2 [mem 0xfce00000-0xfcffffff 64bit pref]
[    0.740443] pci_bus 0000:02: resource 0 [io  0x7000-0x7fff]
[    0.742142] pci_bus 0000:02: resource 1 [mem 0xfe600000-0xfe7fffff]
[    0.744090] pci_bus 0000:02: resource 2 [mem 0xfcc00000-0xfcdfffff 64bit pref]
[    0.746264] pci_bus 0000:03: resource 0 [io  0x8000-0x8fff]
[    0.747965] pci_bus 0000:03: resource 1 [mem 0xfe400000-0xfe5fffff]
[    0.749858] pci_bus 0000:03: resource 2 [mem 0xfca00000-0xfcbfffff 64bit pref]
[    0.752076] pci_bus 0000:04: resource 0 [io  0x9000-0x9fff]
[    0.753748] pci_bus 0000:04: resource 1 [mem 0xfe200000-0xfe3fffff]
[    0.755639] pci_bus 0000:04: resource 2 [mem 0xfc800000-0xfc9fffff 64bit pref]
[    0.757799] pci_bus 0000:05: resource 0 [io  0x1000-0x4fff]
[    0.759506] pci_bus 0000:05: resource 1 [mem 0xfd800000-0xfe1fffff]
[    0.761402] pci_bus 0000:05: resource 2 [mem 0xfc000000-0xfc7fffff 64bit pref]
[    0.763555] pci_bus 0000:05: resource 4 [io  0x0000-0x0cf7 window]
[    0.765437] pci_bus 0000:05: resource 5 [io  0x0d00-0xffff window]
[    0.767319] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.769391] pci_bus 0000:05: resource 7 [mem 0x80000000-0xafffffff window]
[    0.771469] pci_bus 0000:05: resource 8 [mem 0xc0000000-0xfebfffff window]
[    0.773825] pci_bus 0000:05: resource 9 [mem 0x100000000-0x8ffffffff window]
[    0.775943] pci_bus 0000:06: resource 0 [io  0x4000-0x4fff]
[    0.777640] pci_bus 0000:06: resource 1 [mem 0xfde00000-0xfdffffff]
[    0.779542] pci_bus 0000:06: resource 2 [mem 0xfc600000-0xfc7fffff 64bit pref]
[    0.781706] pci_bus 0000:07: resource 0 [io  0x3000-0x3fff]
[    0.783400] pci_bus 0000:07: resource 1 [mem 0xfdc00000-0xfddfffff]
[    0.785290] pci_bus 0000:07: resource 2 [mem 0xfc400000-0xfc5fffff 64bit pref]
[    0.787441] pci_bus 0000:08: resource 0 [io  0x2000-0x2fff]
[    0.789140] pci_bus 0000:08: resource 1 [mem 0xfda00000-0xfdbfffff]
[    0.791088] pci_bus 0000:08: resource 2 [mem 0xfc200000-0xfc3fffff 64bit pref]
[    0.793258] pci_bus 0000:09: resource 0 [io  0x1000-0x1fff]
[    0.794945] pci_bus 0000:09: resource 1 [mem 0xfd800000-0xfd9fffff]
[    0.796824] pci_bus 0000:09: resource 2 [mem 0xfc000000-0xfc1fffff 64bit pref]
[    0.799131] NET: Registered protocol family 2
[    0.800649] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[    0.802831] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[    0.804848] TCP: Hash tables configured (established 16384 bind 16384)
[    0.806858] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[    0.808686] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[    0.810692] NET: Registered protocol family 1
[    0.812176] pci 0000:00:01.0: Video device with shadowed ROM
[    0.814207] ACPI: PCI Interrupt Link [GSIG] enabled at IRQ 22
[    0.816493] ACPI: PCI Interrupt Link [GSIA] enabled at IRQ 16
[    0.818689] ACPI: PCI Interrupt Link [GSIB] enabled at IRQ 17
[    0.820871] ACPI: PCI Interrupt Link [GSIC] enabled at IRQ 18
[    0.823144] ACPI: PCI Interrupt Link [GSID] enabled at IRQ 19
[    0.827105] PCI: CLS 64 bytes, default 64
[    2.791144] Trying to unpack rootfs image as initramfs...
[    2.852952] Freeing initrd memory: 97320K
[    2.855894] redpill: loading out-of-tree module taints kernel.
[    2.857571] redpill: module verification failed: signature and/or required key missing - tainting kernel
[    2.879348] PCI host bridge to bus 0001:09
[    2.880533] pci_bus 0001:09: root bus resource [io  0x0000-0xffff]
[    2.882595] pci_bus 0001:09: root bus resource [mem 0x00000000-0xffffffffff]
[    2.884965] pci_bus 0001:09: root bus resource [bus 00-ff]
[    2.887081] pci 0001:09:00.0: [1b4b:9235] type 00 class 0x010601
[    2.889351] pci 0001:09:00.0: Can't map mv9235 registers
[    2.891406] PCI host bridge to bus 0001:0c
[    2.892916] pci_bus 0001:0c: root bus resource [io  0x0000-0xffff]
[    2.895729] pci_bus 0001:0c: root bus resource [mem 0x00000000-0xffffffffff]
[    2.897699] pci_bus 0001:0c: busn_res: can not insert [bus 0c-ff] under domain [bus 00-ff] (conflicts with (null) [bus 09-ff])
[    2.901163] pci_bus 0001:0c: root bus resource [bus 00-ff]
[    2.902821] pci 0001:0c:00.0: [1b4b:9235] type 00 class 0x010601
[    2.904605] pci 0001:0c:00.0: Can't map mv9235 registers
[    2.918654] audit: initializing netlink subsys (disabled)
[    2.920784] audit: type=2000 audit(1675939899.920:1): initialized
[    2.923442] Initialise system trusted keyring
[    2.979631] VFS: Disk quotas dquot_6.6.0
[    2.980641] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    3.152596] Key type asymmetric registered
[    3.154268] Asymmetric key parser 'x509' registered
[    3.155649] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[    3.157543] io scheduler noop registered
[    3.158634] io scheduler deadline registered
[    3.159939] io scheduler cfq registered (default)
[    3.173791] aer 0000:00:1c.0:pcie02: service driver aer loaded
[    3.175768] aer 0000:00:1c.1:pcie02: service driver aer loaded
[    3.177645] aer 0000:00:1c.2:pcie02: service driver aer loaded
[    3.179426] aer 0000:00:1c.3:pcie02: service driver aer loaded
[    3.181179] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[    3.183098] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[    3.184957] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
[    3.187588] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
[    3.190209] pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
[    3.192112] pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded
[    3.194091] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
[    3.195936] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
[    3.679562] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    3.712426] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    3.907606] serial8250: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[    3.913529] brd: module loaded
[    3.914731] lpc_ich 0000:00:1f.0: I/O space for GPIO uninitialized
[    3.916583] Loading iSCSI transport class v2.0-870.
[    3.919095] tsc: Refined TSC clocksource calibration: 3292.456 MHz
[    3.920808] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2f7575fa69d, max_idle_ns: 440795366746 ns
[    3.930371] rdac: device handler registered
[    3.976656] i2c /dev entries driver
[    3.977687] i801_smbus 0000:00:1f.3: SMBus using polling
[    3.979649] ahci 0000:00:1f.2: version 3.0
[    3.981808] ahci 0000:00:1f.2: AHCI 0001.0000 32 slots 6 ports 1.5 Gbps 0x3f impl SATA mode
[    3.984118] ahci 0000:00:1f.2: flags: 64bit ncq only 
[    4.056897] scsi host0: ahci
[    4.063534] scsi host1: ahci
[    4.066923] scsi host2: ahci
[    4.070914] scsi host3: ahci
[    4.073672] scsi host4: ahci
[    4.076524] scsi host5: ahci
[    4.077506] ata1: SATA max UDMA/133 abar m4096@0xfea1f000 port 0xfea1f100 irq 28
[    4.079655] ata2: SATA max UDMA/133 abar m4096@0xfea1f000 port 0xfea1f180 irq 28
[    4.081832] ata3: SATA max UDMA/133 abar m4096@0xfea1f000 port 0xfea1f200 irq 28
[    4.084103] ata4: SATA max UDMA/133 abar m4096@0xfea1f000 port 0xfea1f280 irq 28
[    4.086272] ata5: SATA max UDMA/133 abar m4096@0xfea1f000 port 0xfea1f300 irq 28
[    4.088472] ata6: SATA max UDMA/133 abar m4096@0xfea1f000 port 0xfea1f380 irq 28
[    4.091845] ACPI: PCI Interrupt Link [GSIF] enabled at IRQ 21
[    4.094693] ACPI: PCI Interrupt Link [GSIE] enabled at IRQ 20
[    4.097169] ahci 0000:06:07.0: AHCI 0001.0000 32 slots 6 ports 1.5 Gbps 0x3f impl SATA mode
[    4.099551] ahci 0000:06:07.0: flags: 64bit ncq only 
[    4.124833] scsi host6: ahci
[    4.125955] scsi host7: ahci
[    4.127532] scsi host8: ahci
[    4.130351] scsi host9: ahci
[    4.134296] scsi host10: ahci
[    4.139672] scsi host11: ahci
[    4.140643] ata7: SATA max UDMA/133 abar m4096@0xfde60000 port 0xfde60100 irq 29
[    4.142934] ata8: SATA max UDMA/133 abar m4096@0xfde60000 port 0xfde60180 irq 29
[    4.144897] ata9: SATA max UDMA/133 abar m4096@0xfde60000 port 0xfde60200 irq 29
[    4.146882] ata10: SATA max UDMA/133 abar m4096@0xfde60000 port 0xfde60280 irq 29
[    4.148893] ata11: SATA max UDMA/133 abar m4096@0xfde60000 port 0xfde60300 irq 29
[    4.150985] ata12: SATA max UDMA/133 abar m4096@0xfde60000 port 0xfde60380 irq 29
[    4.153722] ahci: probe of 0001:09:00.0 failed with error -22
[    4.155868] ahci: probe of 0001:0c:00.0 failed with error -22
[    4.158421] rtc_cmos 00:03: RTC can wake from S4
[    4.162809] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    4.164698] rtc_cmos 00:03: alarms up to one day, y3k, 242 bytes nvram, hpet irqs
[    4.167159] md: raid1 personality registered for level 1
[    4.169845] NET: Registered protocol family 17
[    4.171121] Key type dns_resolver registered
[    4.204713] mce: Using 10 MCE banks
[    4.205719] registered taskstats version 1
[    4.206553] Loading compiled-in untrusted X.509 certificates
[    4.207451] Loading compiled-in X.509 certificates
[    4.208320] Loaded X.509 cert 'Synology SDG kernel module signing key: 7bd0b0d6bcd31651c22ce3978bdc8c8bdc417329'
[    4.211349] Loaded X.509 cert 'Synology Root Certification Authority: f2c075361f168425f8b5ef31b796406c3aab2089'
[    4.213130] Loaded X.509 cert 'Synology Kernel Module Signing Certification Authority: 600839b5d127e0e11d817a31f0575d323a7c0e28'
[    4.216344] Loaded X.509 cert 'Synology kernel module signing key: 4646ce54489669338118a3b1286da156ac366fa5'
[    4.219165] page_owner is disabled
[    4.220141] AppArmor: AppArmor sha1 policy hashing enabled
[    4.223861] rtc_cmos 00:03: setting system clock to 2023-02-09 10:51:41 UTC (1675939901)
[    4.397280] ata3: SATA link down (SStatus 0 SControl 300)
[    4.400222] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    4.402958] ata1: SATA link down (SStatus 0 SControl 300)
[    4.405651] ata5: SATA link down (SStatus 0 SControl 300)
[    4.407239] ata6: SATA link down (SStatus 0 SControl 300)
[    4.408689] ata2.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100
[    4.410103] ata2.00: applying bridge limits
[    4.411303] ata2.00: configured for UDMA/100
[    4.412707] ata4: SATA link down (SStatus 0 SControl 300)
[    4.423561] scsi 1:0:0:0: CD-ROM            QEMU     QEMU DVD-ROM             2.5+ PQ: 0 ANSI: 5
[    4.467309] ata7: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    4.469399] ata12: SATA link down (SStatus 0 SControl 300)
[    4.471118] ata7.00: ATA-7: QEMU HARDDISK, 2.5+, max UDMA/100
[    4.472716] ata7.00: 104857600 sectors, multi 16: LBA48 NCQ (depth 31/32)
[    4.474266] ata7.00: SN:QM00013
[    4.475237] ata7.00: applying bridge limits
[    4.476549] ata8: SATA link down (SStatus 0 SControl 300)
[    4.478435] ata9: SATA link down (SStatus 0 SControl 300)
[    4.480142] ata11: SATA link down (SStatus 0 SControl 300)
[    4.481679] ata10: SATA link down (SStatus 0 SControl 300)
[    4.483416] ata7.00: configured for UDMA/100
[    4.484690] ata7.00: Find SSD disks. [QEMU HARDDISK]
[    4.486258] scsi 6:0:0:0: Direct-Access     QEMU     HARDDISK                 2.5+ PQ: 0 ANSI: 5
[    4.489373] sd 6:0:0:0: [sdg] 104857600 512-byte logical blocks: (53.7 GB/50.0 GiB)
[    4.490929] sd 6:0:0:0: [sdg] Write Protect is off
[    4.491705] sd 6:0:0:0: [sdg] Mode Sense: 00 3a 00 00
[    4.492540] sd 6:0:0:0: [sdg] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    4.495322] sd 6:0:0:0: [sdg] Attached SCSI disk
[    4.497960] Freeing unused kernel memory: 924K
[    4.499384] Write protecting the kernel read-only data: 8192k
[    4.501786] Freeing unused kernel memory: 584K
[    4.503851] Freeing unused kernel memory: 268K
START /linuxrc.syno
START /linuxrc.syno.impl
[    4.649046] random: nonblocking pool is initialized
addons.sh called with params early
Insert Marvell 1475 SATA controller driver
Insert basic USB modules...
:: Loading module usb-common ... [  OK  ]
:: Loading module usbcore[    4.717869] ACPI: bus type USB registered
[    4.719392] usbcore: registered new interface driver usbfs
[    4.721296] usbcore: registered new interface driver hub
[    4.723167] usbcore: registered new interface driver ethub
[    4.725117] usbcore: registered new device driver usb
 ... [  OK  ]
:: Loadi[    4.741939] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ng module ehci-hcd ... [  OK  ]
:: Lo[    4.751612] ehci-pci: EHCI PCI platform driver
ad[    4.754161] ehci-pci 0000:00:1a.7: EHCI Host Controller
i[    4.756289] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
[    4.758474] ehci-pci 0000:00:1a.7: irq 19, io mem 0xfea19000
ng module ehci-pci[    4.766157] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[    4.768524] hub 1-0:1.0: USB hub found
[    4.770056] hub 1-0:1.0: 6 ports detected
[    4.772630] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    4.774695] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
[    4.777704] ehci-pci 0000:00:1d.7: irq 19, io mem 0xfea1e000
[    4.785112] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    4.786425] hub 2-0:1.0: USB hub found
[    4.787192] hub 2-0:1.0: 6 ports detected
 ... [  OK  ]
:: Loading module uhci-hcd[    4.801224] uhci_hcd: USB Universal Host Controller Interface driver
[    4.804983] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    4.807048] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[    4.809568] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00005040
[    4.811930] hub 3-0:1.0: USB hub found
[    4.813292] hub 3-0:1.0: 2 ports detected
[    4.815561] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    4.817389] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[    4.820485] uhci_hcd 0000:00:1a.1: irq 17, io base 0x00005060
[    4.823314] hub 4-0:1.0: USB hub found
[    4.824196] hub 4-0:1.0: 2 ports detected
[    4.825880] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[    4.827234] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[    4.829645] uhci_hcd 0000:00:1a.2: irq 18, io base 0x00005080
[    4.833644] hub 5-0:1.0: USB hub found
[    4.843608] hub 5-0:1.0: 2 ports detected
[    4.845781] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    4.847457] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[    4.849964] uhci_hcd 0000:00:1d.0: irq 16, io base 0x000050a0
[    4.853815] hub 6-0:1.0: USB hub found
[    4.854862] hub 6-0:1.0: 2 ports detected
[    4.863163] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    4.865293] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[    4.868293] uhci_hcd 0000:00:1d.1: irq 17, io base 0x000050c0
[    4.873161] hub 7-0:1.0: USB hub found
[    4.874333] hub 7-0:1.0: 2 ports detected
[    4.876941] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    4.878447] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[    4.880693] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000050e0
[    4.889295] hub 8-0:1.0: USB hub found
[    4.890488] hub 8-0:1.0: 2 ports detected
 ... [  OK  ]
:: Loading module xhci-hcd ... [  OK  ]
[    4.923860] clocksource: Switched to clocksource tsc
:: Loading module xhci-pci[    4.931725] xhci_hcd 0000:00:02.0: xHCI Host Controller
[    4.933801] xhci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 9
[    5.136321] xhci_hcd 0000:00:02.0: hcc params 0x00080001 hci version 0x100 quirks 0x00000014
[    5.139571] hub 9-0:1.0: USB hub found
[    5.140709] hub 9-0:1.0: 4 ports detected
[    5.142027] xhci_hcd 0000:00:02.0: xHCI Host Controller
[    5.143454] xhci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 10
[    5.145615] usb usb10: We don't know the algorithms for LPM for this host, disabling LPM.
[    5.148523] hub 10-0:1.0: USB hub found
[    5.149676] hub 10-0:1.0: 4 ports detected
 ... [  OK  ]
addons.sh called with params modules
Starting eudev daemon
[    5.169974] udevd[4846]: starting version 3.2.11
[    5.171227] udevd[4846]: specified group 'tty' unknown
[    5.172471] udevd[4846]: specified group 'dialout' unknown
[    5.173772] udevd[4846]: specified group 'kmem' unknown
[    5.175037] udevd[4846]: specified group 'input' unknown
[    5.176292] udevd[4846]: specified group 'video' unknown
[    5.177544] udevd[4846]: specified group 'audio' unknown
[    5.178835] udevd[4846]: specified group 'disk' unknown
[    5.180084] udevd[4846]: specified group 'cdrom' unknown
[    5.181338] udevd[4846]: specified group 'tape' unknown
[    5.182589] udevd[4846]: specified group 'kvm' unknown
[    5.184821] udevd[4847]: starting eudev-3.2.11
Triggering add events to udev
[    5.188260] udevd[4847]: specified group 'tty' unknown
[    5.189665] udevd[4847]: specified group 'dialout' unknown
[    5.191179] udevd[4847]: specified group 'kmem' unknown
[    5.192674] udevd[4847]: specified group 'input' unknown
[    5.194205] udevd[4847]: specified group 'video' unknown
[    5.195669] udevd[4847]: specified group 'audio' unknown
[    5.197122] udevd[4847]: specified group 'disk' unknown
[    5.198516] udevd[4847]: specified group 'cdrom' unknown
[    5.199938] udevd[4847]: specified group 'tape' unknown
[    5.201343] udevd[4847]: specified group 'kvm' unknown
[    5.219392] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[    5.221336] ACPI: Power Button [PWRF]
[    5.234209] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[    5.237512] serio: i8042 KBD port at 0x60,0x64 irq 1
[    5.238816] serio: i8042 AUX port at 0x60,0x64 irq 12
[    5.262111] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    5.272906] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[    5.275738] e1000: Copyright (c) 1999-2006 Intel Corporation.
[    5.278311] ACPI: PCI Interrupt Link [GSIH] enabled at IRQ 23
[    5.293990] sr 1:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray
[    5.295103] cdrom: Uniform CD-ROM driver Revision: 3.20
[    5.299113] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    5.366141] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[    5.443669] usbcore: registered new interface driver usbhid
[    5.445616] usbhid: USB HID core driver
[    5.454043] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1:1.0/0003:0627:0001.0001/input/input3
[    5.462630] hid-generic 0003:0627:0001.0001: input: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:1d.7-1/input0
[    5.581183] BUG: unable to handle kernel NULL pointer dereference at           (null)
[    5.582007] IP: [<ffffffffa01ac429>] e1000_probe+0xe99/0xf80 [e1000]
[    5.582007] PGD 0 
[    5.582007] Oops: 0002 [#1] SMP 
[    5.582007] Modules linked in: hid_generic usbhid hid atkbd(OE) sr_mod(OE) cdrom(OE) e1000(E+) virtio_pci(OE) virtio(OE) virtio_ring(OE) etxhci_hcd i8042(OE) processor button(OE) xhci_pci xhci_hcd uhci_hcd ehci_pci ehci_hcd usbcore usb_common mv14xx(O)
[    5.582007] CPU: 1 PID: 4856 Comm: udevd Tainted: G           OE   4.4.180+ #42962
[    5.582007] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
[    5.582007] task: ffff88007b738000 ti: ffff880078a60000 task.ti: ffff880078a60000
[    5.582007] RIP: 0010:[<ffffffffa01ac429>]  [<ffffffffa01ac429>] e1000_probe+0xe99/0xf80 [e1000]
[    5.582007] RSP: 0018:ffff880078a63b28  EFLAGS: 00010202
[    5.582007] RAX: 0000000000000006 RBX: ffff88007d371000 RCX: 0000000000000000
[    5.582007] RDX: 000000001835ebba RSI: 0000000000000001 RDI: 000000000002831b
[    5.582007] RBP: ffff880078a63ba0 R08: ffff880078a60000 R09: 000000013bc95ceb
[    5.582007] R10: ffff88006f98ec54 R11: 0000000000000002 R12: 0000000000000043
[    5.582007] R13: ffff88006f98eb60 R14: ffff88006f98e000 R15: 0000000000000000
[    5.582007] FS:  00007f6104e93c00(0000) GS:ffff88007dd00000(0000) knlGS:0000000000000000
[    5.582007] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[    5.582007] CR2: 0000000000000000 CR3: 000000007b111000 CR4: 00000000000006f0
[    5.582007] Stack:
[    5.582007]  ffff880077ce14b0 ffff880077ce13c0 ffff8800734c6870 ffffffff8173cb61
[    5.582007]  ffff880000000000 ffff88006f98ec54 ffff88006f98e7c0 0000000000000202
[    5.582007]  0000000000000202 ffff880078a63ba0 ffff88007d371098 ffffffffa01b8be0
[    5.582007] Call Trace:
[    5.582007]  [<ffffffff81315ca0>] pci_device_probe+0x90/0x100
[    5.582007]  [<ffffffff8139d45a>] driver_probe_device+0xba/0x260
[    5.582007]  [<ffffffff8139d679>] __driver_attach+0x79/0x80
[    5.582007]  [<ffffffff8139d600>] ? driver_probe_device+0x260/0x260
[    5.582007]  [<ffffffff8139b739>] bus_for_each_dev+0x69/0xa0
[    5.582007]  [<ffffffff8139cea9>] driver_attach+0x19/0x20
[    5.582007]  [<ffffffff8139cafc>] bus_add_driver+0x19c/0x1e0
[    5.582007]  [<ffffffffa01c0000>] ? 0xffffffffa01c0000
[    5.582007]  [<ffffffff8139de1b>] driver_register+0x6b/0xc0
[    5.582007]  [<ffffffff81314741>] __pci_register_driver+0x41/0x50
[    5.582007]  [<ffffffffa01c004c>] e1000_init_module+0x4c/0x7f [e1000]
[    5.582007]  [<ffffffff81000340>] do_one_initcall+0x80/0x130
[    5.582007]  [<ffffffff811621b9>] ? __vunmap+0x99/0xf0
[    5.582007]  [<ffffffff8117049d>] ? kfree+0x13d/0x160
[    5.582007]  [<ffffffff810bf26b>] do_init_module+0x5b/0x1d0
[    5.582007]  [<ffffffff810c1044>] load_module+0x1be4/0x2080
[    5.582007]  [<ffffffff810bdef0>] ? __symbol_put+0x40/0x40
[    5.582007]  [<ffffffff8118a4ac>] ? kernel_read+0x3c/0x50
[    5.582007]  [<ffffffff810c169d>] SYSC_finit_module+0x7d/0xa0
[    5.582007]  [<ffffffff810c16d9>] SyS_finit_module+0x9/0x10
[    5.582007]  [<ffffffff81566d8a>] entry_SYSCALL_64_fastpath+0x1e/0x8e
[    5.582007] Code: ff ff ff e9 81 f7 ff ff 41 f6 86 40 0f 00 00 02 75 7a 49 8b be 70 0b 00 00 41 bf fb ff ff ff e9 65 f7 ff ff 41 8b 96 54 0c 00 00 <89> 11 89 c2 41 8b 44 12 fc 89 44 11 fc 49 8b 8e f0 02 00 00 e9 
[    5.582007] RIP  [<ffffffffa01ac429>] e1000_probe+0xe99/0xf80 [e1000]
[    5.582007]  RSP <ffff880078a63b28>
[    5.582007] CR2: 0000000000000000
[    5.677734] ---[ end trace 0a31a02b8431d3ae ]---
[    5.679535] udevd[4847]: worker [4856] terminated by signal 9 (Killed)
[    5.681382] udevd[4847]: worker [4856] failed while handling '/devices/pci0000:00/0000:00:1e.0/0000:05:01.0/0000:06:12.0'
[    5.802291] usb 10-1: new SuperSpeed USB device number 2 using xhci_hcd
[    5.819195] usb-storage 10-1:1.0: USB Mass Storage device detected
[    5.825331] scsi host12: usb-storage 10-1:1.0
[    5.826629] usbcore: registered new interface driver usb-storage
[    6.828310] scsi 12:0:0:0: Direct-Access     QEMU     QEMU HARDDISK            2.5+ PQ: 0 ANSI: 5
[    6.831582] sd 12:0:0:0: [synoboot] 2097152 512-byte logical blocks: (1.07 GB/1.00 GiB)
[    6.834241] sd 12:0:0:0: [synoboot] Write Protect is off
[    6.835694] sd 12:0:0:0: [synoboot] Mode Sense: 63 00 00 08
[    6.837612] sd 12:0:0:0: [synoboot] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    6.841972]  synoboot: synoboot1 synoboot2 synoboot3
[    6.845332] sd 12:0:0:0: [synoboot] Attached SCSI removable disk
insmod: can't [   15.856534] broadwellnk_synobios: module license 'Synology Inc.' taints kernel.
insert '/lib/modules/etxhci-hcd.ko': Fil[   15.865301] synobios open /dev/ttyS1 success
e [   15.866998] 2023-2-9 10:51:53 UTC
[   15.868589] synobios: load, major number 201
[   15.870666] Brand: Synology
[   15.872026] Model: DS-3622xs+
e[   15.873453] set group disks wakeup number to 4, spinup time deno 7
[   15.876381] synobios cpu_arch proc entry initialized
[   15.878725] synobios crypto_hw proc entry initialized
[   15.881118] synobios syno_platform proc entry initialized
xists
Insert net driver(Mindspeed only)...
Starti[   15.891388] Module [broadwellnk_synobios] is removed. 
[   15.893168] synobios: unload
ng /usr/syno/bin/synocfgen...
/usr/syno/bin/synocfgen returns 0
addons.sh called with params patches
Adjust disks related configs automatically - patches
maxdisks=12
internalportcfg=0xfff
esataportcfg=0
usbportcfg=0xf00000
Insert synorbd kernel module
Insert synofsbd kernel module
Insert sha256 kernel module
All disk ready or timeout execeed
Assemble args:
Exit on error [12] No raid status in path /sys/block/md0/md/array_state, go to junior mode...
Thu Feb  9 10:51:53 UTC 2023
addons.sh called with params jrExit
none /sys/kernel/debug debugfs umount: /etc/mtab: No such file or directory
linuxrc.syno failed on 12
starting pid 5042, tty '': '/etc/rc'
:: Starting /etc/rc
:: Mounting procfs ... [  OK  ]
:: Mounting tmpfs ... [  OK  ]
:: Mounting devtmpfs ... [  OK  ]
:: Mounting devpts ... [  OK  ]
:: Mounting sysfs ... [  OK  ]
:: Loading module sg[   16.150828] sr 1:0:0:0: Attached scsi generic sg0 type 5
[   16.152147] sd 6:0:0:0: Attached scsi generic sg1 type 0
[   16.153401] sd 12:0:0:0: Attached scsi generic sg2 type 0
 ... [  OK  ]
:: Loading module crc-ccitt ... [  OK  ]
:: Loading module crc-itu-t ... [  OK  ]
:: Loading module acpi-cpufreq ... [FAILED]
:: Loading module cpufreq_ondemand ... [  OK  ]
:: Loading module cpufreq_performance ... [  OK  ]
:: Loading module cpufreq_conservative ... [  OK  ]
:: Loading module mdio ... [  OK  ]
:: Loading module fat ... [  OK  ]
:: Loading module vfat ... [  OK  ]
:: Loading module udp_tunnel ... [  OK  ]
:: Loading module ip6_udp_tunnel ... [  OK  ]
:: Loading module vxlan ... [  OK  ]
:: Loading module dca[   16.270916] dca service started, version 1.12.1
 ... [  OK  ]
:: Loading module e1000e[   16.277522] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[   16.279076] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
 ... [  OK  ]
:: Loading module i2c-algo-bit ... [  OK  ]
:: Loading module igb[   16.291768] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.3.0-k
[   16.293606] igb: Copyright (c) 2007-2014 Intel Corporation.
 ... [  OK  ]
:: Loading module be2net ... [  OK  ]
:: Loading module ixgbe[   16.305891] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 4.2.1-k
[   16.307873] ixgbe: Copyright (c) 1999-2015 Intel Corporation.
 ... [  OK  ]
:: Loading module r8168 ... [  OK  ]
:: Loading module i40e[   16.320127] i40e: Intel(R) Ethernet Connection XL710 Network Driver - version 1.3.46-k
[   16.322424] i40e: Copyright (c) 2013 - 2014 Intel Corporation.
 ... [  OK  ]
:: Loading module atlantic ... [  OK  ]
:: Loading module sunrpc[   16.347648] RPC: Registered named UNIX socket transport module.
[   16.349219] RPC: Registered udp transport module.
[   16.350489] RPC: Registered tcp transport module.
[   16.351755] RPC: Registered tcp NFSv4.1 backchannel transport module.
 ... [  OK  ]
:: Loading module grace ... [  OK  ]
:: Loading module lockd ... [  OK  ]
:: Loading module nfs ... [  OK  ]
:: Loading module nfsv3 ... [  OK  ]
:: Loading module adt7475 ... [  OK  ]
Can not detect ADT device, Retry: 1...
:: Unloading module adt7475[   17.408454] Module [adt7475] is removed. 
 ... [  OK  ]
:: Unloading module i2c-i801[   17.418056] Module [i2c_i801] is removed. 
 ... [FAILED]
:: Loading module adt7475 ... [  OK  ]
Can not detect ADT device, Retry: 2...
:: Unloading module adt7475[   19.442851] Module [adt7475] is removed. 
 ... [  OK  ]
:: Unloading module i2c-i801[   19.455225] Module [i2c_i801] is removed. 
 ... [FAILED]
:: Loading module adt7475 ... [  OK  ]
Can not detect ADT device, Retry: 3...
:: Unloading module adt7475[   21.479373] Module [adt7475] is removed. 
 ... [  OK  ]
:: Unloading module i2c-i801[   21.488943] Module [i2c_i801] is removed. 
 ... [FAILED]
:: Loading module adt7475 ... [  OK  ]
[   22.525850] synobios open /dev/ttyS1 success
[   22.527310] 2023-2-9 10:51:59 UTC
[   22.528238] synobios: load, major number 201
[   22.529408] Brand: Synology
[   22.530201] Model: DS-3622xs+
[   22.530969] set group disks wakeup number to 4, spinup time deno 7
[   22.532618] synobios cpu_arch proc entry initialized
[   22.533963] synobios crypto_hw proc entry initialized
[   22.535302] synobios syno_platform proc entry initialized
mknod: /dev/synobios: File exists
Starting SW init...
[   23.146352] Module [broadwellnk_synobios] is removed. 
[   23.147895] synobios: unload
:: Loading module synobios[   23.181163] synobios open /dev/ttyS1 success
[   23.182687] 2023-2-9 10:51:59 UTC
[   23.183587] synobios: load, major number 201
[   23.184725] Brand: Synology
[   23.185481] Model: DS-3622xs+
[   23.186280] set group disks wakeup number to 4, spinup time deno 7
[   23.188178] synobios cpu_arch proc entry initialized
[   23.189877] synobios crypto_hw proc entry initialized
[   23.191236] synobios syno_platform proc entry initialized
 ... [  OK  ]
lo        Link encap:Local Loopback  
          inet addr:127.0.0.1  Mask:255.0.0.0
          UP LOOPBACK RUNNING  MTU:65536  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1 
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

:: Starting syslogd ... [  OK  ]
:: Starting scemd
:: Starting services in background
Starting JuniorExpansionPack
Starting findhostd in flash_rd...
Starting services in flash_rd...
Running /usr/syno/etc/rc.d/J01httpd.sh...
Starting httpd:80 in flash_rd...
Starting httpd:5000 in flash_rd...
Running /usr/syno/etc/rc.d/J03ssdpd.sh...
/usr/bin/minissdpd
Usage: /usr/bin/minissdpd [-d] [-6] [-s socket] [-p pidfile] -i <interface> [-i <interface2>] ...

  <interface> is either an IPv4 address such as 192.168.1.42, or an
interface name such as eth0.

  By default, socket will be open as /var/run/minissdpd.sock
and pid written to file /var/run/minissdpd.pid
start SSDPD failed
Running /usr/syno/etc/rc.d/J04synoagentregisterd.sh...
Starting synoagentregisterd...
Running /usr/syno/etc/rc.d/J30DisableNCQ.sh...
Running /usr/syno/etc/rc.d/J80ADTFanControl.sh...
ADT Set FAN SPEED
/usr/syno/etc/rc.d/J80ADTFanControl.sh: line 41: can't create /tmp/ADTFanPath//pwm1_high_freq: nonexistent directory
/usr/syno/etc/rc.d/J80ADTFanControl.sh: line 43: can't create /tmp/ADTFanPath//pwm1_syno_control: nonexistent directory
/usr/syno/etc/rc.d/J80ADTFanControl.sh: line 50: can't create /tmp/ADTFanPath//pwm1: nonexistent directory
/usr/syno/etc/rc.d/J80ADTFanControl.sh: line 41: can't create /tmp/ADTFanPath//pwm2_high_freq: nonexistent directory
/usr/syno/etc/rc.d/J80ADTFanControl.sh: line 43: can't create /tmp/ADTFanPath//pwm2_syno_control: nonexistent directory
/usr/syno/etc/rc.d/J80ADTFanControl.sh: line 50: can't create /tmp/ADTFanPath//pwm2: nonexistent directory
Running /usr/syno/etc/rc.d/J98nbnsd.sh...
Starting nbnsd...
Running /usr/syno/etc/rc.d/J99avahi.sh...
Starting Avahi mDNS/DNS-SD Daemon
cname_load_conf failed:/var/tmp/nginx/avahi-aliases.conf
Excution Error
============ Date ============
Thu Feb  9 10:52:06 UTC 2023
==============================
addons.sh called with params rcExit
starting pid 6310, tty '': '/sbin/getty 115200 console'

Thu Feb  9 10:52:06 2023

SynologyNAS login: 
 

 

Edited February 9, 2023 by apriliars3

[SpiderPOH]

i have the same Problem...  

[cpresco]

2 hours ago, oswaldini said:

 

 

I bought used H370M-ITX, i5-8400 and 16GB RAM for €158 ($170). I hunted for this motherboard because it has 2x LAN and 6x SATA. I'm getting rid of my Dell 7010 with a Dell Perc H310. I'm on a tight budget so I'll probably order 3x WD Red Plus 4TB drives, the old two WD Red 2TB will be left for non-essential data.

 

You can use the usb serial port to leave the PCIe slot empty. Here I found drivers for DSM: https://github.com/robertklep/dsm7-usb-serial-drivers

 

 

For my needs I don't need additional 2.5Gb or 10Gb NIC, it will aggregate 2x1Gb NIC. I'll probably add a serial port soon.

 

The cable for the serial connection on my Lantronix Spider KVM requires a 9pin serial port and I have tried a 9pin serial to USB converter but wasn't able to get any output from that configuration. The driver you reference was likely the missing component and is likely an excellent candidate to be added to default ARPL/TCRP installs.

 

I believe you'll be happy with the H370M-ITX, i5-8400 and 16GB RAM, I would have migrated to a similar configuration (H370M-ITX, i5-9400t and 16GB RAM) if I hadn't found the IMB-1211-D.

[oswaldini]

1 hour ago, cpresco said:

I believe you'll be happy with the H370M-ITX, i5-8400 and 16GB RAM, I would have migrated to a similar configuration (H370M-ITX, i5-9400t and 16GB RAM) if I hadn't found the IMB-1211-D.

This was a set, normally I would buy i5-8x00T because of TDP. I will leave it, I will not burn a dollar to save a dime.

[yanjun]

@fbelavenutoIs there a plan to list EPYC7002 as beta in arpl, are there any obstacles currently encountered

 

[kiberturist]

8 часов назад, apriliars3 сказал:

I don´t get IP with boot the loader. I think freeze after this capture.

Same problem. Acer sff,  j5005 cpu. But arpl-1.0-beta13 - boot fine..

[DHChoi]

14 hours ago, nemesis122 said:

Yes i can confirm this is the best Loader so far working in any states do not forget to add the CPU Governor Command for full performance in the task scheduler 

and add with this the correct CPU Information and voila all is working perfect 

 

 

Regarding the CPU Governor Command, I know that only before the 4gen CPU needs it and it's not necessary (or have a side impact) after 5gen CPU.

Here is my test result (Gen9 CPU) without CPU Governor Command.

 

https://browser.geekbench.com/v5/cpu/19929906

 

[The Chief]

Had anyone migrated successfuly (migration. not a fresh install) from DS3615xs DSM6 to DSM7? Maybe DS3622xs is the best solution?

[gericb]

2 hours ago, The Chief said:

Had anyone migrated successfuly (migration. not a fresh install) from DS3615xs DSM6 to DSM7? Maybe DS3622xs is the best solution?

Yes, I did.  I used @Peter SuhM-Shell w/Friend TCRP loader.  I went from DS3615xs on 6.2.3.x to DS3622xs on 7.1.1 in one straight forward flawless upgrade.  Of course, there was some packages that needed to be updated/repaired, and I had more issues getting my Plex functional again....but nothing epic.  You want to be sure when you migrate, that you select the default option to keep your settings and data.  It will be the top option of two listed.

[dh22r]

3 hours ago, The Chief said:

Had anyone migrated successfuly (migration. not a fresh install) from DS3615xs DSM6 to DSM7? Maybe DS3622xs is the best solution?

on my dell T30, i'd migrated from 3615xs (DSM6) to 3622xs (DSM7) using arpl-0.4-alpha8 (i believe).

now it's on arpl-1.0-beta13.

[The Chief]

53 минуты назад, dh22r сказал:

to 3622xs (DSM7)

To last 7.1.1 build in one step?

[dh22r]

1 hour ago, The Chief said:

To last 7.1.1 build in one step?

yes ... it was a while back ... using one of the arpl-0.4-alphaN versions.

 

i think once/if the systems boots, via "Synology Assistant" (desktop app), the server shows up as "SynologyNAS" with status "Migrateable" (i believe).

[gericb]

1 hour ago, The Chief said:

To last 7.1.1 build in one step?

Mine was certainly one step, no in between versions, which is what I thought I would have to do, but this is where @Peter Suh provided the greatest help, aside from creating his awesome tool....that I would be jumping from my current DSM 6.2.3 to 7.1.1 in one action, and of course, changing the model at the same time.  That saved me a lot of worry and concerns. 🤠

Edited February 10, 2023 by gericb

[The Chief]

31 минуту назад, gericb сказал:

Mine was certainly one step, no in between versions

2 часа назад, dh22r сказал:

i'd migrated from 3615xs (DSM6) to 3622xs (DSM7)

Thank you, guys, I'll try it. It's a small office Xpenology NAS running DSM6.2 on Jun's loader flawlessly nearly 3 years. It runs SMB/CIFS in AD environment with complex set of AD users/groups rights within shares, web station serving a few self-written php services, ActiveBackup backing up user's workstations… Not gonna make a disaster during workday.

Edited February 10, 2023 by The Chief

[gericb]

1 hour ago, The Chief said:

Thank you, guys, I'll try it. It's a small office Xpenology NAS running DSM6.2 on Jun's loader flawlessly nearly 3 years. It runs SMB/CIFS in AD environment with complex set of AD users/groups rights within shares, web station serving a few self-written php services, ActiveBackup backing up user's workstations… Not gonna make a disaster during workday.

Not that I am specifically advocating it for you, but I manually through the Control Panel, Update/Restore did Update 3, right after the conversion.  Last night, though the changeling appears to have nothing worthy, also did the same to Update 4.  I am not using my setup in a true production environment, other than I expect it to perform and have the same rock solid reliability in my "Xpenology NAS running DSM6.2 on Jun's loader flawlessly nearly 3 years".  I don't need any disaster and things to break either, and this isn't your environment, I just don't have much time to play doctor if it was to fail, hence being hyper-concerned about it.  I even did testing on a 2nd box, so that helped have some warm fuzzies about it at least.  I'm running only RAID 1 on  Dell Optiplex 7010.  I'll be upgrading here in the near future to a Dell Precision 3630 and larger drives.

 

I'd keep your original USB loader, get a 2nd USB, and build the new loader there, that way you have some fall-back.

[vasiliy_gr]

Here are few words on testing 1.1-beta-1/2 on my four NAS-es.

 

On beta1 I had one big issue. It did not work with LSI 9400-16i at least in fresh install mode of ARPL (while LSI 9300-8i worked). And while I decided if I will test it in update menu mode - it changed to beta2... On beta2 there were no problems with 9400 in both update menu and fresh install variants.

 

So on beta2 I do not have any issues for now. But I have one question. What happened with maxdisks entry in Synoinfo menu? In both betas 1.1. It has a practical value for me for one NAS from four. And for that NAS I chose update by menu mode (where this setting was done previously). In this mode there were no errors really. I got all my 16 hdd-s plus one fake hdd from QEMU. But what about install from scratch?..

 

And one more thing... 'Direct boot' menu entry is only available when loader is already made. So to see or change this setting one needs to build loader and then go above to advanced menu and then go below twice to boot loader entry. It is some sort of distortion of ARPL menu logic... So 'direct boot' situated not in place... Or it should not be hidden before first loader's build.

[danger]

Good day. I have such a problem, after loading, the connection with the server disappears, I look at the ping, passes 4 packages, and then silence. I tried to put it as a new one, I also tried to update from the menu, it did not help. He put both on a real PC and on a virtual machine, the problem is the same everywhere. Moreover, the problem began with 1.1b1 and also, the most on 1.1b2, on version 1.0.b13 this is not. Who has come across this, tell me what can be done.

[apriliars3]

Same problem. Acer sff,  j5005 cpu. But arpl-1.0-beta13 - boot fine..

With arpl v1.1-beta2 I can detect IP and install without issues.

I test it with E1000 on Proxmox.

[raeesumer]

On 2/7/2023 at 11:53 AM, oswaldini said:

Hi, I want to buy H370M-ITX/ac. This motherboard has two network cards: Intel I219V and I211AT - will both NICs work? The information I found are not unequivocal.

I am using the similar ASRock Z390M-ITX/ac, ARPL with DS3622xs+ is running good in my box with two active network. I configured teaming with two NIC. Hope your Mobo H370M-ITX/ac will good to go also

[raeesumer]

I have a plan to buy new box with onboard CPU china made NAS motherboard. The processor is AMD Ryzen 7 5825U with AMD Radeon™ Graphics + four 2.5G Ethernet port. Anyone has any experience. My plan is to go for DVA3221 with ARPL. Anybody has any suggestion or feedback regarding the compatibility or any issues while running surveillance system.

[apriliars3]

6 hours ago, raeesumer said:

I have a plan to buy new box with onboard CPU china made NAS motherboard. The processor is AMD Ryzen 7 5825U with AMD Radeon™ Graphics + four 2.5G Ethernet port. Anyone has any experience. My plan is to go for DVA3221 with ARPL. Anybody has any suggestion or feedback regarding the compatibility or any issues while running surveillance system.

 

AMD has no gpu compatible with IA on Surveillance Station, only Nvidia or Intel.

[dh22r]

On 2/11/2023 at 8:54 AM, apriliars3 said:

With arpl v1.1-beta2 I can detect IP and install without issues.

I test it with E1000 on Proxmox.

same here, on bare metal -- dell optiplex 7050 micro.

[IG-88]

Test  with dva1622 - arpl 1.1. beta2

system was 8th gen intel cpu on a gigabyte b360m-hd3 (the usual realtek onboard nic) with a added 2port 10G  broadcom nic (bnx2x driver)

2 x sata 525GB ssd , 2 x sata 256GB ssd

 

-r8169 driver, nic working but fw error seen, dmesg: r8169 0000:02:00.0 eth2: unable to load firmware patch rtl_nic/rtl8168h-2.fw (-11), solved by manual copy of firmware tgz from loader
->no fw files after setup of loader in dsm system /lib/firmware  (just a small bug? but will effect lot of other things like intel qsv probleme too)

-bnx2x, nic not working, dmesg: bnx2x: [bnx2x_init_firmware:13421(eth0)]Can't load firmware file bnx2x/bnx2x-e2-7.12.30.0.fw

the default fw files from arpl (copied manually to /lib/firmware) di not fix that
after copying my old 6.2.3 fw files (or whats in bnx2x in firmware repository on kernel.org) it works as expected, the firmware files in the firmware.tgz where 7.13 and thats not what the driver need, in theory it can be checked with modinfo (but is also possible to look near "vermagic" with a editor so see that information too)
in general its not enough to just copy the latest firmware files from kernel.org as it depends on the driver and drives from "older" kernels like 4.x need older firmware files then kernel 5.x drivers, there is no fixed rule, it needs to be checked or just all firmware files for that hardware to make sure it will work

 

-tehuti 10G nic (just used shortly as the 10G braodcom did not work) has no driver, on 6.2.3 it was ok with the original syno driver from 918+ tn40xx.ko, but 2nd tehuti card i own i know has a different phy and did need a better/newer driver to work so it needs a better driver in general for all tehuti based cards to work (had that in 6.2.3 extra.lzma and it was mostly about getting exotic firmware files from oem for different phy's as oem's usually only pack the one firmware they need, there was no universal driver as seen from realtek or intel)

-I kind of miss atlantic.ko (lots of cheap 10G cards with that one) and aqc111.ko (https://github.com/bb-qq/aqc111), both where asked for 6.2.3 extra drivers

-default mod for synoinfo.conf only works with one nic (maxlanport=1), it needs manuall tweaking that is not for beginners, it should detect all nic's and set synionfo.conf accordingly or make it 4 as fixed setting - it might also need more when it comes to mac adresses (netif_num=1 as default needs to be set to 2 or more and mac2, mac3, ...) - atm its problematic to have more then one nic

-defaut config only shows 2 disks in gui (even if 6 ports are detected on loader setup),more disks can be used for raid but cat /proc/mdstat shows only two drives are used (?,2of2)  for the system/swap (two pairs of disks in exaple as SHR1)
for a system with shr1/raid1 that might be ok but usually it should be all disks that hold dsm system/swap
[note: the "raidF1" option the kernel offers, that was not availible on 918+ 6.2.3, thats one reason more to user dva1622)

 

Personalities : [raid1] [raid6] [raid5] [raid4] [raidF1]
md3 : active raid1 sata2p6[1] sata1p6[0]
      268605760 blocks super 1.2 [2/2] [UU]

md2 : active raid5 sata4p5[3] sata3p5[2] sata2p5[1] sata1p5[0]
      700414848 blocks super 1.2 level 5, 64k chunk, algorithm 2 [4/4] [UUUU]

md1 : active raid1 sata4p2[2](S) sata3p2[3](S) sata2p2[1] sata1p2[0]
      2097088 blocks [2/2] [UU]

md0 : active raid1 sata4p1[2](S) sata3p1[3](S) sata2p1[1] sata1p1[0]
      8388544 blocks [2/2] [UU]

 

 

test of possible disk fails
tested with only disk 3+4 present and it did not boot (8GB + 2GB partitions are present on disk 3+4 but as mdstat indicates are not used)
test with 1+2 booted as expected but had the raid/volume1 shown as "crashed" (shr1 raid not mounted/used), after adding the two missing disks it went back to normal
boot with 2+4 looks messy as it now shows the 2nd disk as disk1 and 4th disk as disk2 (but only as detected), reattaching the two drives did not return the system to normal and shoed disk1 as crashed
its not unexpected as the system/swap raid1 of disk1 was offline and as the shr1 is composed of a raid1 and raid5 (md2 and md3) the raid1 was mounted and with just one disk present in the boot before and now fails because of this (2nd disk has older data), the raid5 is ok as it was not mounted/used in the boot before as two disks where missing

cat /proc/mdstat
Personalities : [raid1] [raid6] [raid5] [raid4] [raidF1]
md2 : active raid5 sata1p5[0] sata4p5[3] sata3p5[2] sata2p5[1]
      700414848 blocks super 1.2 level 5, 64k chunk, algorithm 2 [4/4] [UUUU]

md3 : active raid1 sata2p6[1]
      268605760 blocks super 1.2 [2/1] [_U]

md1 : active raid1 sata4p2[0] sata3p2[2](S) sata2p2[1]
      2097088 blocks [2/2] [UU]

md0 : active raid1 sata4p1[0] sata3p1[2](S) sata2p1[1]
      8388544 blocks [2/2] [UU]

the messy part is that its not possible to repair, when using the repair option it tells you to use a new disks (i guess because of the raid5 partition still in use and working)
I deactivated the drive in gui to remove it from all raid sets but there seemed not to be no option to activate it again or make it available to use it with the pool/volume, a reboot fixed that, repair now worked with the disk and raid/volume got back to normal

to "break" the still fine working raid5 was not so good but its still easy to handle as its not needed to use the console (and you had the chance to backup data before doing it)

as my plan is to use a clean raid5 (all disks same size) i will not run in that kind of problem with my final system

but its not intuitive to use as it need some knowledge about the internal workings when having problems and needing to find a way to fix it

Edited February 13, 2023 by IG-88

[nemesis122]

There is a strange behavior 

Gen8 with i3 CPU

all Models are working except 3617 ARPL 1.1 beta 2

 

 

Gen8 with Xeon 1240 v2  only the cpu is different

ARPL 1.1 beta 2 and all ARPL bigger as 1.03 are not working  udev failed all Models 

The same Loader / New Loader generated / all HDD are formated NOT working 

 

with 1.03b all systems working without any Problem

 

when i update the Addons also the Loader ARPL 1.03 is stopping working 

 

Here is the Log Gen8 with 1240v2 cpu / 16GB RAM/ 4x3TB / 1xssd / 1x Intel 520sfp+ Dual Port one port used  not working same Bios settings

                           

Gen8 with Intel I3 cpu / 16GB RAM/ 4x3TB / 1xssd / 1x Intel 520sfp+ Dual Port one port used this loaders works same Bios settings

 

LOG ARPL 1.11beta 2 all HDD formated clean first boot.txt

Edited February 13, 2023 by nemesis122

[oswaldini]

 

On 2/11/2023 at 6:26 AM, danger said:

Good day. I have such a problem, after loading, the connection with the server disappears, I look at the ping, passes 4 packages, and then silence. I tried to put it as a new one, I also tried to update from the menu, it did not help. He put both on a real PC and on a virtual machine, the problem is the same everywhere. Moreover, the problem began with 1.1b1 and also, the most on 1.1b2, on version 1.0.b13 this is not. Who has come across this, tell me what can be done.

Same here - no IP after boot v1.0-beta13 and v1.1-beta2

Edited February 13, 2023 by oswaldini