chiefg Posted January 16, 2023 Share #1726 Posted January 16, 2023 (edited) Does the DVA3221 build takes advantage of the NVIDIA GPU (if installed) when using PLEX? NVM it seems it does work, thanks! Edited January 16, 2023 by chiefg Quote Link to comment Share on other sites More sharing options...
Peter Suh Posted January 16, 2023 Share #1727 Posted January 16, 2023 (edited) 8 hours ago, Andy Miller said: Can also confirm all 14 disks detected by fdisk during redpill loader configuration. Just none shown once booted into the kernal. It may appear as fdisk in the kernel, but HBA drivers such as mpt3sas do not work on the three platforms I mentioned above. The model with the most appropriate HBA operation is DS3622xs+. You mentioned that you have already tried the DS3622xs+ and RS4021xs+ with HBAs. In case of HBA, disk ports are automatically mapped. Doesn't depend on SataPortMap, DiskIdxMap. Please consider trying to use TCRP FRIEND in another way. https://github.com/PeterSuh-Q3/tinycore-redpill/releases/tag/v0.9.3.0-1 Edited January 16, 2023 by Peter Suh Quote Link to comment Share on other sites More sharing options...
dh22r Posted January 16, 2023 Share #1728 Posted January 16, 2023 apologies if this item was already covered earlier in the thread ... is there a list/descrs of all the modules available under "advanced menu"? i did a recent loader build, using aprl-1.0-beta11a, and couldn't get my LSI 9207-8i (4-drives) recognized. i ended up adding all the modules to the loader for the card to be recognized. any help appreciated. dh Quote Link to comment Share on other sites More sharing options...
Peter Suh Posted January 16, 2023 Share #1729 Posted January 16, 2023 On 9/21/2022 at 11:14 AM, dh22r said: just used the alpha9 image to upgrade my T30 PowerEdge to model DS3622xs+. no issues. Did you add the LSI 9207-8i to the DS3622xs+ this time? This is what I'm already discussing with Andy Miller right above. Please follow the conversation between the two of us. Quote Link to comment Share on other sites More sharing options...
giacomoleopardo Posted January 16, 2023 Share #1730 Posted January 16, 2023 (edited) @fbelavenuto Hi Fabio, great work as ever with ARPL. The strangest thing happened while I was trying a fresh install with v1.0-beta11a via usb pen drive: After building the loader ad rebooting, Synology web assistant couldn't find anything on the local net, then I rebuilt the usb pen with v1.0-beta2 and updated via ARPL (update menu) to v1.0-beta11a. At that point everything has gone smoothly. Maybe I am missing something? Edited January 16, 2023 by giacomoleopardo Quote Link to comment Share on other sites More sharing options...
Loredan Posted January 16, 2023 Share #1731 Posted January 16, 2023 15 часов назад, idaanx сказал: The easy suggestion is, stick with what works. ARPL and TCRP have some road ahead before they're as stable and usable as DSM 6 and Jun's loader was. Another solution I can give you, try out a Hypervisor like Proxmox or similar and run your Windows and DSM in separate VMs. I understand and use TCRP. Just trying to help in diagnosing the problem, maybe it will help in a further solution. Quote Link to comment Share on other sites More sharing options...
Andy Miller Posted January 16, 2023 Share #1732 Posted January 16, 2023 7 hours ago, Peter Suh said: It may appear as fdisk in the kernel, but HBA drivers such as mpt3sas do not work on the three platforms I mentioned above. The model with the most appropriate HBA operation is DS3622xs+. You mentioned that you have already tried the DS3622xs+ and RS4021xs+ with HBAs. In case of HBA, disk ports are automatically mapped. Doesn't depend on SataPortMap, DiskIdxMap. Please consider trying to use TCRP FRIEND in another way. https://github.com/PeterSuh-Q3/tinycore-redpill/releases/tag/v0.9.3.0-1 Interesting. I never realized tinycore had a menu system now like arpl. I did try tinycore yesterday but after building the kernel and it was never discoverable on the network. im out of town for the next couple of days but will try this when I get back. 1 Quote Link to comment Share on other sites More sharing options...
fbelavenuto Posted January 16, 2023 Author Share #1733 Posted January 16, 2023 5 hours ago, giacomoleopardo said: @fbelavenuto Hi Fabio, great work as ever with ARPL. The strangest thing happened while I was trying a fresh install with v1.0-beta11a via usb pen drive: After building the loader ad rebooting, Synology web assistant couldn't find anything on the local net, then I rebuilt the usb pen with v1.0-beta2 and updated via ARPL (update menu) to v1.0-beta11a. At that point everything has gone smoothly. Maybe I am missing something? Hi, thanks. What is the model of your network card? Quote Link to comment Share on other sites More sharing options...
Orphée Posted January 16, 2023 Share #1734 Posted January 16, 2023 12 hours ago, chiefg said: Does the DVA3221 build takes advantage of the NVIDIA GPU (if installed) when using PLEX? NVM it seems it does work, thanks! As long as you use the right GPU, I guess it should. Mine works with Jellyfin and Emby, so I think Plex should be the same. Considering you must have a plex account for HW transcoding. Quote Link to comment Share on other sites More sharing options...
fbelavenuto Posted January 16, 2023 Author Share #1735 Posted January 16, 2023 21 hours ago, idaanx said: One small issue remains though. The ARPL loader/configurator still has the governor set to userspace with the lowest speed. This is only on the pre-Skylake system, Skylake and up use the intel_pstate driver with different settings, VM doesn't use this at all. I'll fix this too. 1 Quote Link to comment Share on other sites More sharing options...
The Chief Posted January 16, 2023 Share #1736 Posted January 16, 2023 Have I to rebuild loader to update 7.0.1-42218 to 7.1.1-42962 or I can just load it in DSM GUI? (it's a part of Synology recommeded DSM6 to latest DSM7 migration path, update from 6.2.3-25426 to 7.0.1-42218 went successful) Quote Link to comment Share on other sites More sharing options...
The Chief Posted January 16, 2023 Share #1737 Posted January 16, 2023 Never mind, solved it. Quote Link to comment Share on other sites More sharing options...
giacomoleopardo Posted January 16, 2023 Share #1738 Posted January 16, 2023 7 hours ago, fbelavenuto said: Hi, thanks. What is the model of your network card? I219V Quote Link to comment Share on other sites More sharing options...
marcinx98x Posted January 17, 2023 Share #1739 Posted January 17, 2023 (edited) Hello, I have a strange problem, everything worked great on xpenology DS3615XS. I want to change the processor from i3 to xeon and here begins the problem: two hard drives connected via sata expansion card do not work on the xeon processor what is the matter? bootloader detects them correctly but DSM7 no longer sees them. Edited January 17, 2023 by marcinx98x Quote Link to comment Share on other sites More sharing options...
AleAmadoC Posted January 18, 2023 Share #1740 Posted January 18, 2023 Hello, first thank you for the great work and great product. Do the vm Installation Guide changed? We used to install 2 Sata Controllers, Boot Drive on Sata 0-0, and the first Synology disk on Sata 1-0, now if I do that I get the error of no disk found, so I tried and tried and found that only works on Sata 1-3 and beyond altough Synology detect the disks as Disk 34 and so on. Its working witouth issues but I just wanted to ask, Thank you. Quote Link to comment Share on other sites More sharing options...
AleAmadoC Posted January 18, 2023 Share #1741 Posted January 18, 2023 22 minutes ago, AleAmadoC said: Hello, first thank you for the great work and great product. Do the vm Installation Guide changed? We used to install 2 Sata Controllers, Boot Drive on Sata 0-0, and the first Synology disk on Sata 1-0, now if I do that I get the error of no disk found, so I tried and tried and found that only works on Sata 1-3 and beyond altough Synology detect the disks as Disk 34 and so on. Its working witouth issues but I just wanted to ask, Thank you. Nevermind, just found out that you dont need 2 satas anymore >.< you can go on adding disks on sata 0-1 and so on. 2 Quote Link to comment Share on other sites More sharing options...
dmtg Posted January 18, 2023 Share #1742 Posted January 18, 2023 The version beta 11a not work in hp Microserver proliant Gen8. After build the loader cannot obtain ip. Quote Link to comment Share on other sites More sharing options...
dj_nsk Posted January 19, 2023 Share #1743 Posted January 19, 2023 1 час назад, dmtg сказал: The version beta 11a not work in hp Microserver proliant Gen8. After build the loader cannot obtain ip. this contradicts the previous message: Quote Link to comment Share on other sites More sharing options...
dmtg Posted January 19, 2023 Share #1744 Posted January 19, 2023 52 minutes ago, dj_nsk said: this contradicts the previous message: I used the beta 7 and update to 11a and rebuild the loader and the loader not detect the lan Quote Link to comment Share on other sites More sharing options...
dh22r Posted January 19, 2023 Share #1745 Posted January 19, 2023 On 1/15/2023 at 8:06 PM, Peter Suh said: Did you add the LSI 9207-8i to the DS3622xs+ this time? This is what I'm already discussing with Andy Miller right above. Please follow the conversation between the two of us. got it -- much appreciated. another question ... my setup: asrock z390 phantom ITX board. i've 8 drives -- 4 onboard SATA, 4 on a 9207-8i card. via arpl-1.0-beta10a, with all modules selected, my LAN (i219, i believe) and my LSI card is recognized. everything works. via arpl-1.0-beta11a, all modules selected, my LAN works but the LSI card isn't recognized. reboot again using the beta10a flash drive, everything working as before. not sure whether i should've done anything different for the beta11a to work. i'm fine with beta10a. thanks again. dh 1 Quote Link to comment Share on other sites More sharing options...
nemesis122 Posted January 19, 2023 Share #1746 Posted January 19, 2023 6 hours ago, dj_nsk said: this contradicts the previous message: pls note i have tested with Intel 520SFP+ 10Gbit networkcard Gen8 Microserver I3 CPU 2 cores 16Gb RAM not the orginal networkcard in the gen8 it is disabled could you test with ARPL 1.03b ? https://github.com/nemesis122/arpl/releases/download/1.03/arpl-1.0-beta3.img.zip Which Version do you have from the gen8 with Xeon ? Quote Link to comment Share on other sites More sharing options...
royeiror Posted January 19, 2023 Share #1747 Posted January 19, 2023 On 12/22/2022 at 7:29 AM, idaanx said: Could you guys post a list of PCI devices? Start the ARPL configurator. Use ssh to get into the device and type 'lspci -nnk' (without quotes) and copy the output. Or with a monitor and keyboard connected to the device type 'lspci -nnk > /mnt/p1/lspci.txt' (without qoutes), then type 'poweroff' and unplug the flash drive when it's off. Plug in the flash into your main computer and your should see the lspci.txt file. Sorry it took me this long to get back. I'll try to post everything relevant so it's easier to work through. Quote root@arpl:/opt/arpl# lspci -nnk 00:00.0 Host bridge [0600]: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series SoC Transaction Register [8086:2280] (rev 35) Subsystem: Lenovo Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series SoC Transaction Register [17aa:30c9] Kernel driver in use: iosf_mbi_pci 00:02.0 VGA compatible controller [0300]: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Integrated Graphics Controller [8086:22b1] (rev 35) DeviceName: Onboard IGD Subsystem: Lenovo Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Integrated Graphics Controller [17aa:30c9] 00:13.0 SATA controller [0106]: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series SATA Controller [8086:22a3] (rev 35) DeviceName: Sata Controller Subsystem: Lenovo Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series SATA Controller [17aa:30c9] Kernel driver in use: ahci 00:14.0 USB controller [0c03]: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series USB xHCI Controller [8086:22b5] (rev 35) Subsystem: Lenovo Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series USB xHCI Controller [17aa:30c9] Kernel driver in use: xhci_hcd 00:1a.0 Encryption controller [1080]: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series Trusted Execution Engine [8086:2298] (rev 35) Subsystem: Lenovo Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series Trusted Execution Engine [17aa:30c9] 00:1b.0 Audio device [0403]: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series High Definition Audio Controller [8086:2284] (rev 35) DeviceName: Onboard Audio Subsystem: Lenovo Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series High Definition Audio Controller [17aa:30c9] 00:1c.0 PCI bridge [0604]: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series PCI Express Port #1 [8086:22c8] (rev 35) Kernel driver in use: pcieport 00:1f.0 ISA bridge [0601]: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series PCU [8086:229c] (rev 35) Subsystem: Lenovo Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series PCU [17aa:30c9] 00:1f.3 SMBus [0c05]: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx SMBus Controller [8086:2292] (rev 35) Subsystem: Lenovo Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx SMBus Controller [17aa:30c9] Kernel driver in use: i801_smbus 01:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 0c) DeviceName: Onboard LAN Subsystem: Lenovo RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [17aa:30c9] Kernel driver in use: r8169 Kernel modules: r8169 I'll also add the whole run-down of the M600 BIOS https://imgur.com/a/7k7By9P Quote Link to comment Share on other sites More sharing options...
CCitarella Posted January 19, 2023 Share #1748 Posted January 19, 2023 Hi All: Please forgive me as I posted this in the wrong spot previously, I apologize for that. BareMetal DellR510 w/ PERC H700 using ARPL v1.0-beta11a and trying to learn and solve reboot issue after DSM install: I've been playing with trying to get a BareMetal install with ARPL v1.0-beta11a to work on a DellR510 12 drive system. The box has a PERC H700 which I believe is an LSI RAID card, but I have the disks all set as individual virtual drives (I did this previously on the older Synoboot 6.2 version of loaders without a problem and DSM saw each drive individually). The loader configures fine (tried various builds) and boots and will install DSM but the system will not reboot itself on its own (I have to hard power cycle it) after the DSM install. Also once it does come back up (boots successfully) and shows an IP on the console but the device is not found in Syno Assistant. I did add an additional NIC so I have both a Broadcom and an Intel NIC in the system besides whatever is onboard on the Dell box, but I think the problem has something to do with it not cleaning up and rebooting on its own after the DSM install as a result of the hard power cycle. I don't have any data on the drives and I'm just trying to get it come up after the installation so starting from scratch is not a problem. I've looked at possible missing add-ons and searched here for any potential things to try with config edits, etc. but I'm pretty new at this so I was curious if anyone in the community could offer suggestions to put me on the right path of what I should be looking for to solve this (point me in a direction??!?). This same hardware WAS working on the 6.2 older version from years ago, but I haven't kept up with the latest and decided to give ARPL a shot. Thanks in advance for the help. Quote Link to comment Share on other sites More sharing options...
fbelavenuto Posted January 19, 2023 Author Share #1749 Posted January 19, 2023 Guys, update the ARPL, addons and modules. Add the addon "console", rebuild the loader and test it. 1 Quote Link to comment Share on other sites More sharing options...
Derex Posted January 19, 2023 Share #1750 Posted January 19, 2023 5 minutes ago, fbelavenuto said: Guys, update the ARPL, addons and modules. Add the addon "console", rebuild the loader and test it. obrigado Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.