xonic Posted October 11, 2022 Share #1001 Posted October 11, 2022 Hello, with the latest arpl on Vmware, the serial output show this error: Loading kernel... Loading initramfs... Booting... [ 5.505404] tmpfs: Unknown parameter 'mode' mount: mounting [ 5.506129] tmpfs: Unknown parameter 'mode' tmpfs on /dev/shm failed: Invali[ 5.507066] tmpfs: Unknown parameter 'mode' d argument mount: mounting tmpfs on /tmp failed: Invalid argument mount: mounting tmpfs on /run failed: Invalid argument Is it important ? Quote Link to comment Share on other sites More sharing options...
Alexandroz Posted October 11, 2022 Share #1002 Posted October 11, 2022 How to make Automated RedPill Loader work with network card Intel I225T1BLK 999PT6 ? Quote Link to comment Share on other sites More sharing options...
RacerX Posted October 11, 2022 Share #1003 Posted October 11, 2022 On 10/10/2022 at 2:16 PM, fbelavenuto said: It's definitely missing a driver for your network card. Please open an issue at "https://github.com/fbelavenuto/arpl-modules/issues" requesting this module, it will make my life easier. I just opened an issue for the chelsio nics at https://github.com/fbelavenuto/arpl-modules/issues thanks 1 Quote Link to comment Share on other sites More sharing options...
Reefie Posted October 12, 2022 Share #1004 Posted October 12, 2022 Just installed using this loader for the 1st time, amazing work. Thank you. I have a cosmetic problem that I could do with some help with if possible: Is there a way to remap Port 5 to 4 so that they appear consecutive in DSM? Quote Link to comment Share on other sites More sharing options...
Menen Posted October 12, 2022 Share #1005 Posted October 12, 2022 How to make i915-3e98 work on DVA1622? Quote Link to comment Share on other sites More sharing options...
NooL Posted October 12, 2022 Share #1006 Posted October 12, 2022 9 hours ago, Reefie said: Just installed using this loader for the 1st time, amazing work. Thank you. I have a cosmetic problem that I could do with some help with if possible: Is there a way to remap Port 5 to 4 so that they appear consecutive in DSM? There is - You will need to add a cmdline with sata remap I believe. Have a look at this topic - It should explain it Otherwise just ask Quote Link to comment Share on other sites More sharing options...
NooL Posted October 12, 2022 Share #1007 Posted October 12, 2022 (edited) 1 hour ago, Menen said: How to make i915-3e98 work on DVA1622? I believe you need this: (Which I also believe is selectable as a addon in ARPL?) Edited October 12, 2022 by NooL Quote Link to comment Share on other sites More sharing options...
mcdull Posted October 12, 2022 Share #1008 Posted October 12, 2022 I have some issue after moving to ARPL. My usb hdd is now detected as internal drive, and I would like it to behave as normal. Any help or guide I can refer to? DSM7.1, with DS918+ image in a VM. Quote Link to comment Share on other sites More sharing options...
MJFox Posted October 13, 2022 Share #1009 Posted October 13, 2022 On 10/7/2022 at 4:27 PM, Valiran34 said: Hello, It doesn't work with img on Unraid. instead download the VMDK version use OVMF Q35-6.2, don't put anything in "OS Install ISO", select USB3 QEMU, 1st disk manual and manually type the path do you APRL.vmdk (not the flat) (and select SATA boot order 1). Next add you personnals HDD as your wish and boot are you sure it has to be the APRL.vmdk and not the flat-version? I just get a "Shell>" prompt when booting the non-flat version and I can not do anything there Quote Link to comment Share on other sites More sharing options...
fbelavenuto Posted October 13, 2022 Author Share #1010 Posted October 13, 2022 On 10/11/2022 at 2:53 PM, xonic said: Hello, with the latest arpl on Vmware, the serial output show this error: Loading kernel... Loading initramfs... Booting... [ 5.505404] tmpfs: Unknown parameter 'mode' mount: mounting [ 5.506129] tmpfs: Unknown parameter 'mode' tmpfs on /dev/shm failed: Invali[ 5.507066] tmpfs: Unknown parameter 'mode' d argument mount: mounting tmpfs on /tmp failed: Invalid argument mount: mounting tmpfs on /run failed: Invalid argument Is it important ? No, is safe to ignore. Quote Link to comment Share on other sites More sharing options...
fbelavenuto Posted October 13, 2022 Author Share #1011 Posted October 13, 2022 On 10/11/2022 at 4:03 PM, Alexandroz said: How to make Automated RedPill Loader work with network card Intel I225T1BLK 999PT6 ? There are no drivers for this network card yet. Quote Link to comment Share on other sites More sharing options...
sk0rpion22 Posted October 13, 2022 Share #1012 Posted October 13, 2022 (edited) First I want to thank everyone who contributed in making this loader work. I managed to install the loader in VM Ware. I used the loader on first SATA controller and data HDD on SCSI controller and to make the HDD visible in DSM I had to use SataPortMap and DiskIdxMap, but as can be seen in picture below the HDD shows on second slot. I tried different values for SataPortMap, value 08 -> HDD not detected in DMS, value 18 HDD is on slot 2, value 28 HDD is on slot 3. Anybody knows what value is right to get the HDD on slot 1? Edited October 13, 2022 by sk0rpion22 Quote Link to comment Share on other sites More sharing options...
Green Posted October 13, 2022 Share #1013 Posted October 13, 2022 (edited) 18 minutes ago, sk0rpion22 said: First I want to thank everyone who contributed in making this loader work. I managed to install the loader in VM Ware. I used the loader on first SATA controller and data HDD on SCSI controller and to make the HDD visible in DSM I had to use SataPortMap and DiskIdxMap, but as can be seen in picture below the HDD shows on second slot. I tried different values for SataPortMap, value 08 -> HDD not detected in DMS, value 18 HDD is on slot 2, value 28 HDD is on slot 3. Anybody knows what value is right to get the HDD on slot 1? This works correctly, Do this and Not have those after install troubles, Make life easy for yourself Edited October 13, 2022 by Green Quote Link to comment Share on other sites More sharing options...
TheEvilSide Posted October 13, 2022 Share #1014 Posted October 13, 2022 (edited) Hello: I am testing the version of automatic redpill loader and it works great. There are only 2 things that don't work for me. I hope someone helps me. I am coming from JUN'S LOADER v1.04b - DS918+ and DSM version 6.2.3-25426 My computer is an Msi B360m Pro-vd / Intel Celeron G5400 Gold / 2x4Gb ram DDR-4. 1- In the hardware and power options, energy program I have set it to turn on and off at a certain time. It turns off, but doesn't turn on. Before it did it automatically without problems 2 - The other question I have is that I have seen that there is an addon called i915-3e98, which can be installed during boot. Everything works fine for me, and I don't know whether to install it because I don't know what benefit it would give me. Many thanks to fbelavenuto and its members and the XPEnology community for their good work. Edited October 13, 2022 by TheEvilSide Quote Link to comment Share on other sites More sharing options...
Rick4 Posted October 13, 2022 Share #1015 Posted October 13, 2022 Just now, TheEvilSide said: Hello: I am testing the version of automatic redpill loader and it works great. There are only 2 things that don't work for me. I hope someone helps me. I am coming from JUN'S LOADER v1.04b - DS918+ and DSM version 6.2.3-25426 My computer is an Msi B360m Pro-vd / Intel Celeron G5400 Gold / 2x4Gb ram DDR-4. 1- In the hardware and power options, energy program I have set it to turn on and off at a certain time. It turns off, but doesn't turn on. Before it did it automatically without problems 2 - The other question I have is that I have seen that there is an addon called i915-3e98, which can be installed during boot. Everything works fine for me, and I don't know whether to install it because I don't know what benefit it would give me. Many thanks to fbelavenuto and its members and the XPEnology community for their good work. 1st: read forum before post. 2nd: read forum before post. Quote Link to comment Share on other sites More sharing options...
TheEvilSide Posted October 13, 2022 Share #1016 Posted October 13, 2022 Thank you very much Rick4 In addition to that help or say it is on the internet or search in google. Can you give me any more clues? Quote Link to comment Share on other sites More sharing options...
Rick4 Posted October 13, 2022 Share #1017 Posted October 13, 2022 19 minutes ago, TheEvilSide said: Thank you very much Rick4 In addition to that help or say it is on the internet or search in google. Can you give me any more clues? Pls read forum, we posted many more issues before you, so you can find really all answer to your question, do not need post about same situation or issues. Quote Link to comment Share on other sites More sharing options...
mcdull Posted October 13, 2022 Share #1018 Posted October 13, 2022 May I have a quick question? is this loader blocking quickconnect or transcoding service? I have a valid serial number and mac under vm but cannot get either to work. with the TinyCore RedPill Loader I have no such issue. Thanks. Quote Link to comment Share on other sites More sharing options...
ditheo Posted October 14, 2022 Share #1019 Posted October 14, 2022 I have updated from 42661 (tcrp) to 42962-update 1 with the ARPL . everything seems to be ok except some issues. I cannot enable file services , i cannot change hardware settings , i cannot change security settings ... This is what I get. running on proxmox pve7.2.11 can you help me? Quote Link to comment Share on other sites More sharing options...
wifi75 Posted October 14, 2022 Share #1020 Posted October 14, 2022 (edited) Hello, I don't know what happened I have a vm on proxmox, last night it crashed, now the network card does not recognize me anymore, what can I do? Edited October 14, 2022 by wifi75 Quote Link to comment Share on other sites More sharing options...
sebigeli Posted October 14, 2022 Share #1021 Posted October 14, 2022 (edited) Hello, This loader is very cool. Good job I just have one big problem for me. The loader is installed on VM on ESXI in 7.0.3. I have installed the firmware and DSM 7.1.1 it's working fine but I can't create a snapshot on the VM so I can't do backup with VEEAM. Anyone have a fix for this ? I don't undestand why it's not working... I just select the disk 0:0 for the backup, just for save the NAS (loader, dsm...) I have try, when I create a VM and import the VDMK loader on it, without even starting the vm, we can no longer create a snapshot. It's normal, I can't boot on the loader if the VM use UEFI ? Thanks Edited October 14, 2022 by sebigeli Quote Link to comment Share on other sites More sharing options...
wifi75 Posted October 14, 2022 Share #1022 Posted October 14, 2022 hello I can no longer find the guide on how to install ARPL on proxmox, does anyone remember the link? Quote Link to comment Share on other sites More sharing options...
ditheo Posted October 14, 2022 Share #1023 Posted October 14, 2022 1 hour ago, ditheo said: I have updated from 42661 (tcrp) to 42962-update 1 with the ARPL . everything seems to be ok except some issues. I cannot enable file services , i cannot change hardware settings , i cannot change security settings ... This is what I get. running on proxmox pve7.2.11 can you help me? I will answer to my self and to be written on this forum I build again the loader and re-upload pat file. Then everything runs fine until I try to change the mtu manually from 1500 to 9000 to vmx3 virtual network card. After that DSM reboots abnormally and files services , security and many more don't work. Quote Link to comment Share on other sites More sharing options...
TheEvilSide Posted October 14, 2022 Share #1024 Posted October 14, 2022 15 hours ago, Rick4 said: Por favor, lea el foro, publicamos muchos más problemas antes que usted, por lo que puede encontrar realmente todas las respuestas a su pregunta, no necesita publicar sobre la misma situación o problemas. Hi Rick4. I have read all the pages of this thread, 41. Nothing is said about power schedule, wake on. I've read much of the redpill thread and haven't seen anyone mention this. I have also read on github and neither. Before posting to ask for help I have spent a lot of time reading and I have not found any information about it. Regards Quote Link to comment Share on other sites More sharing options...
Rick4 Posted October 14, 2022 Share #1025 Posted October 14, 2022 16 minutes ago, TheEvilSide said: Hi Rick4. I have read all the pages of this thread, 41. Nothing is said about power schedule, wake on. I've read much of the redpill thread and haven't seen anyone mention this. I have also read on github and neither. Before posting to ask for help I have spent a lot of time reading and I have not found any information about it. Regards Read again, i posted same situation, and others reply me, fbelavenuto said they try to solve issue, etc etc etc, so if you post anythig that discussed in the nearly past, then this forum will stop, because same issues will repeat itself again and again. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.