Jump to content
XPEnology Community

NooL

Member
 View Profile  See their activity

  • Posts

    147

  • Joined

  • Last visited

 Content Type 

Everything posted by NooL

  1. NooL
    @IG-88 Have you had any experience with these? https://www.aliexpress.com/item/1005004220424617.html
  2. NooL
    Short answer is no unfortunately.
  3. NooL
    Hi Hammond I believe the default ssh password is: Redp1IL-1s-4weSomE Best regards
  4. NooL
    Are you only seeing this issue on Torrent downloads, or is is also slow via Windows File share? (SMB)
  5. NooL
    What does the option to show attached drives (in the loader) look like? That will help
  6. NooL
    Hi Jurgen No need to apologize for language, I think that most of us in here is not native english speakers - so no problem there In regards to your problems. The PSU warnings is a known limitation of the RS4021xs model at the moment, as far as I know there has been no attempts to try and find/modify the warnings that come with it - So for now its just something that you have to live with. In regards to the HBA order - This is a known issue, DSM will put the HBA drives in a random order at boot, I believe that there was efforts made into a work-around to this in the following thread, but I have no idea if it works etc.
  7. NooL
    Well reading a bit more, it seems there is also something with the NIC driver as well as this does not seem right?: [ 9.600202] ixgbe 0000:06:11.0: Multiqueue Enabled: Rx Queue count = 6, Tx Queue count = 6 [ 9.686150] ixgbe 0000:06:11.0: 0.000 Gb/s available PCIe bandwidth (Unknown speed x255 link) [ 9.735199] ixgbe 0000:06:11.0 eth0: MAC: 4, PHY: 9, PBA No: H86377-005 [ 9.735807] ixgbe 0000:06:11.0: 00:11:32:a9:b0:a6 [ 9.736211] ixgbe 0000:06:11.0 eth0: Enabled Features: RxQ: 6 TxQ: 6 FdirHash vxlan_rx [ 9.742887] ixgbe 0000:06:11.0 eth0: Intel(R) 10 Gigabit Network Connection [ 10.126559] ixgbe 0000:06:11.1: Multiqueue Enabled: Rx Queue count = 6, Tx Queue count = 6 [ 10.212914] ixgbe 0000:06:11.1: 0.000 Gb/s available PCIe bandwidth (Unknown speed x255 link) [ 10.266756] ixgbe 0000:06:11.1 eth1: MAC: 4, PHY: 9, PBA No: H86377-005 [ 10.267428] ixgbe 0000:06:11.1: 00:11:32:a9:b0:a7 [ 10.267902] ixgbe 0000:06:11.1 eth1: Enabled Features: RxQ: 6 TxQ: 6 FdirHash vxlan_rx [ 10.274831] ixgbe 0000:06:11.1 eth1: Intel(R) 10 Gigabit Network Connection
  8. NooL
    Hi Peter Strange indeed. I tried to capture what I could during the startup, before it shuts down again: (is there a way to save it all to disk as the buffer seems to cut off before i can copy it all?) It stays there at Fuse init until i try to access it via http it seems, then it begins shutdown. I notice there are a few "taints kernel" it that normal? I've tried just now to install DS3622xs with arpl an that works fine (I've also previously used your own RS4021xs with the same setup, but stopped due to the Power supply warnings) so im not sure this is a network card issue, or maybe multiple issues?
  9. NooL
    Hi Peter Its just a matter of clicking Add Device (Pci device) selecting the one you want to pass through and thats it, perhaps select "All Functions" but thats it Not sure why its failing on my end as this is a fairly simple setup. Any idea why are those conf folders missing for RS3618xs? They are there for all the other models - Seems like an error somewhere?
  10. NooL
    Thank you If it's any help this is the VM: First PCI device is SATA controller Second is Intel X520-T2 Dual port NIC.
  11. NooL
    Hi @Peter Suh and @pocopico Thank you for your reply - Much appreciated I tried this just now with a fresh install, but unfortunately the result remains the same. After installing the pat file and the system doing its installation reboot i get the screen as shown: After ctrl-c and doing the ./boot.sh patchkernel Patching Kernel Kernel patched, Sha256sum: (long signature) Then i do ./boot.sh I can see after a bit that the system starts responding to pings again. I can hear the harddisks working, but after a while the system VM shuts down (i can hear the disks spinning down and then the vm turns off) I can reproduce this every time. If i look in the config folder: There is no RS3618xs folder - Which is also what the system complains about in the first screenshot i think? Shouldnt this folder/subfolder etc be there?
  12. NooL
    Unfortunately this seems to be not just a one time thing - I just tried again, exact same thing happens. There is no RS3618xs folder in config folder so it fails from there it seems.
  13. NooL
    Hi @Peter Suh I tried to Install the RS3618xs with the Friend option, but was not successfull. The system boots, i find it in web assistant, upload the pat file - it installs but after first reboot the TCRP Friend looks like this: And then i either get an install loop (Prompted to install it again) or my VM simply shuts down. Any idea whats wrong? This is a Proxmox Virtual install. Disgard the "Could not get IP" - The system gets an ip 10secs after this.
  14. NooL
    Can't you define a static IP in your router instead? Then it should not be an issue I think?
  15. NooL
    I believe you need this: (Which I also believe is selectable as a addon in ARPL?)
  16. NooL
    There is - You will need to add a cmdline with sata remap I believe. Have a look at this topic - It should explain it Otherwise just ask
  17. NooL
    I meant in the arpl image Nothing has been changed elsewhere in my setup. Do you need any information from me to troubleshoot the issue? like a output of something? btw: great work as always
  18. NooL
    doublepost
  19. NooL
    No problem, understandable Speaking of issues - I seem to be getting a weird issue. I have a DS3622 (Also tried RS4021xs) build via Proxmox - I have passed through a Intel X550-T2 adapter which is registered fine inside DSM, it recognizes it, theres link and it shows 10GBit - But I can't seem to push it over 100Megabytes per sec (Sub 1Gbit) - Iperf3 shows exactly the same values - sub 1gbit. I've previously had 4-500MB/s with the same setup. Could this be a bad driver issue? I've tried reinstalling it multiple times without any result.
  20. NooL
    While I completely agree, what differentiates the DSM 7 and DSM 6 in this regard, or Jun's loader vs rest? If i remember correctly, the DS918+ with Jun's loader on DSM 6 would show the expansion unit if more than 4 drives were attached? I could be mistaken but i seem to recall that at least.
  21. NooL
    free from memory i think you either need to select "Show Beta Models" or ignore CPU flags and then it will show
  22. NooL
    Umm (where) did you check? Second post shows multiplke screenshots, including models with 918+ showing.. So thats a yes.
  23. NooL
    This looks like its supposed to I think. You should be able to reach your NAS/setup by then going to the Ip shown or find.synology.com.. So https://find.synology.com or as an example from your screenshot: Http://192.168.1.175:5000
  24. NooL
    @fbelavenuto Any chance we can include the RS3618xs ? (It should be same platform as already supported models)
  25. NooL
    I believe that if you want to retain SMART info etc, then you still need the v0.12.1 driverset - But with this is it HIGHLY recommended, if not a must that disk hibernation be turned off as there is a chance it will corrupt the raid on wakeup. @IG-88 Can probably elaborate and correct me if I am mistaken.
×
×
  • Create New...