SebastianC Posted August 2, 2022 Share #4076 Posted August 2, 2022 4 minutes ago, rojoone2 said: Other members have faced the same issue with DSM 7 and decided to go with DSM 6.2.3 instead. Have a look at this thread: Im aware of this, but they had issues finding the disks in the device (which i do). Additionally i tried with this, but after the installation process the device shows up without Serial Number and can´t get past a privacy confirmation. Dunno if the Hardware is an issue (Celeron J3355 with 2GB RAM - thought this is fine) or if sth. crashes during the process. And, you know, if its possible to go to the newer version ... Quote Link to comment Share on other sites More sharing options...
rojoone2 Posted August 2, 2022 Share #4077 Posted August 2, 2022 On 8/2/2022 at 9:05 PM, SebastianC said: Hi, im currently trying to install DSM7 on a ReadyNAS 2304. Everything is looking fine (Boot, Find Disks, generate Image etc.) but the USB Stick is not recognized. tc@box:~$ ./rploader.sh identifyusb Found more than one USB disk devices, please select which one is your loader on 1) SanDisk 2) Kingston #? 1 Selected Device : SanDisk , with VendorID: 0x0781 and ProductID: 0x5151 Sorry, no usb disk could be identified The Kingston is the USB Stick which is built in to the Device, the SAN Disk is the one i´m booting tinycore from. After the reboot comes a grub message "grub_disk_native_sectors" not found and rescue Mode is appearing. Can sbd. tell me how to fix this issue? Thanks in Advance Other members have faced the same issue with DSM 7 and decided to go with DSM 6.2.3 instead. Have a look at this thread: Have you tried manually editing the user config with WinSCP before you do your build command? { "extra_cmdline": { "pid": "0x5151", "vid": "0x0781", "sn": "2150SXXXXXXXX", "mac1": "Your ReadyNAS MAC", "SataPortMap": "4", "DiskIdxMap": "00" }, "synoinfo": { "internalportcfg" : "0xffff", "maxdisks" : "16", "support_bde_internal_10g" : "no", "support_disk_compatibility" : "no", "support_memory_compatibility" : "no" }, "ramdisk_copy": { 1 Quote Link to comment Share on other sites More sharing options...
rojoone2 Posted August 2, 2022 Share #4078 Posted August 2, 2022 You can also get a generated serial from Jun's tutorial Quote Link to comment Share on other sites More sharing options...
Kaneske Posted August 2, 2022 Share #4079 Posted August 2, 2022 Anyone got DSM Hotfix Update 4 (7.1-42661-4) installed with TCRP? Same Procedure? First update to update4 from DSM GUI Second boot into TCRP and run ./rploader.sh update now ./rploader.sh fullupgrade now ./rploader.sh backup ./rploader.sh postupdate <yourplatform> Or does it kill my working Hotfix 3 Install? 1 Quote Link to comment Share on other sites More sharing options...
loomes Posted August 2, 2022 Share #4080 Posted August 2, 2022 10 minutes ago, Kaneske said: Anyone got DSM Hotfix Update 4 (7.1-42661-4) installed with TCRP? No rploader update needed. Install Update4 an it will reboot fine. Quote Link to comment Share on other sites More sharing options...
SebastianC Posted August 3, 2022 Share #4081 Posted August 3, 2022 (edited) 16 hours ago, rojoone2 said: Other members have faced the same issue with DSM 7 and decided to go with DSM 6.2.3 instead. Have a look at this thread: Have you tried manually editing the user config with WinSCP before you do your build command? Yeah, manually editing the PID/VID did the job. Now im checking if everything is working (so far im only seeing the Start GUI) Thanks a lot Edited August 3, 2022 by SebastianC Quote Link to comment Share on other sites More sharing options...
Bose321 Posted August 3, 2022 Share #4082 Posted August 3, 2022 On 6/25/2022 at 6:55 PM, Hemin said: as dodo-dk says, his acpid is working correctly with 3622. The one on pocopico is not working I think the dodo-dk code should be imported to pocopino code to avoid confusions Sadly I can't get the 3622 working on unraid as the internet is then broken with whatever adapter I try to use (e1000, e1000e, virtio) Quote Link to comment Share on other sites More sharing options...
phone guy Posted August 3, 2022 Share #4083 Posted August 3, 2022 2 hours ago, Bose321 said: Sadly I can't get the 3622 working on unraid as the internet is then broken with whatever adapter I try to use (e1000, e1000e, virtio) Did you install the ext (drivers) for whichever network you are emulating in unraid? I think there is a step by step tutorial for unraid in the tutorials section Quote Link to comment Share on other sites More sharing options...
docop1 Posted August 3, 2022 Share #4084 Posted August 3, 2022 @phone guy@SebastianC@rojoone2 While the info you seak are within the previous 163 page, checking it can be the best way, but time to read. If you want to discuss another loader or another version : just create a different topic. This topic is only for the great work of Pocopico. @Bose321 as for the acpi, it do work fine, but if you add with the wrong url, that can give a not working condition. Also, it depend on the version of prox you use. best : install prox 7.1 don<t do any update, install tc with acpi and other and it work. No need of dodo not updated file. Quote Link to comment Share on other sites More sharing options...
docop1 Posted August 3, 2022 Share #4085 Posted August 3, 2022 Just to confirm, while doing a v7.1u1 update to u3 : i got an error while the postupdate try to download something at about 38%.. it hang.. like an ssl error or so. But after the reboot, it do show as being running U3. So was it properly apply or something is missing. here : sudo ./rploader.sh postupdate broadwellnk-7.1.0-42661 bspatch does not exist, bringing over from repo % Total % Received % Xferd Average Speed Time Time Time Current Dload Upload Total Spent Left Speed 100 10232 100 10232 0 0 20881 0 --:--:-- --:--:-- --:--:-- 20839 Rploader Version : 0.8.0.5 Loader source : https://github.com/pocopico/redpill-load.git Loader Branch : develop Redpill module source : https://github.com/pocopico/redpill-lkm.git : Redpill module branch : master Extensions : redpill-misc Extensions URL : "https://github.com/pocopico/redpill-load/raw/master/redpill-misc/rpext-index.json" TOOLKIT_URL : https://sourceforge.net/projects/dsgpl/files/toolkit/DSM7.0/ds.broadwellnk-7.0.dev.txz/download TOOLKIT_SHA : 0d9edca67d9e7e14c2529bbb58341b623936124d5264f71f1e4acbacf3ea202d SYNOKERNEL_URL : https://sourceforge.net/projects/dsgpl/files/Synology%20NAS%20GPL%20Source/25426branch/broadwellnk-source/linux-4.4.x.txz/download SYNOKERNEL_SHA : d3e85eb80f16a83244fcae6016ab6783cd8ac55e3af2b4240455261396e1e1be COMPILE_METHOD : toolkit_dev TARGET_PLATFORM : broadwellnk TARGET_VERSION : 7.1.0 TARGET_REVISION : 42661 REDPILL_LKM_MAKE_TARGET : dev-v7 KERNEL_MAJOR : 4 MODULE_ALIAS_FILE : modules.alias.4.json SYNOMODEL : ds3622xsp_42661 MODEL : DS3622xs+ Local Cache Folder : /mnt/sda3/auxfiles DATE Internet : 03082022 Local : 03082022 Checking Internet Access -> OK Cloning into 'redpill-lkm'... remote: Enumerating objects: 1317, done. remote: Counting objects: 100% (389/389), done. remote: Compressing objects: 100% (75/75), done. remote: Total 1317 (delta 333), reused 337 (delta 301), pack-reused 928 Receiving objects: 100% (1317/1317), 484.13 KiB | 145.00 KiB/s, done. Resolving deltas: 100% (896/896), done. Cloning into 'redpill-load'... remote: Enumerating objects: 2066, done. error: RPC failed; curl 56 OpenSSL SSL_read: Connection timed out error: 42608 bytes of body are still expected fetch-pack: unexpected disconnect while reading sideband packet fatal: early EOF fatal: fetch-pack: invalid index-pack output Removing any old redpill.ko modules Looking for redpill for : ds3622xsp_42661 Getting file https://raw.githubusercontent.com/pocopico/rp-ext/master/redpill/releases/redpill-4.4.180plus-broadwellnk.tgz Extracting module Getting file https://raw.githubusercontent.com/pocopico/rp-ext/master/redpill/src/check-redpill.sh mv: cannot move '/home/tc/redpill.ko' to '/home/tc/redpill-load/ext/rp-lkm/redpill-linux-v4.4.180+.ko': No such file or directory Creating temp ramdisk space Mounting partition sda1 Mounting partition sda2 Extracting update ramdisk unlzma: /mnt/sda2/rd.gz: Compressed data is corrupt 48803 blocks Found Version : 7.1-42661-0 Do you want to use this for the loader ? [yY/nN] : Quote Link to comment Share on other sites More sharing options...
docop1 Posted August 3, 2022 Share #4086 Posted August 3, 2022 Precision, redo over a diff version and it look to hang at 43% item objects 908/2066 . with 36.27mb received. It was the same item this weekend. But while the script don<t do a <skip object> it hang and cancel the rest. With a mention of reused existing.. but not updated object. @pocopico is that could cause a partial update as some function not matching or so .. ? Quote Link to comment Share on other sites More sharing options...
docop1 Posted August 4, 2022 Share #4087 Posted August 4, 2022 Perhaps the update 3 is too old and not take in consideration anymore. Will try the update 4 to see. Quote Link to comment Share on other sites More sharing options...
profet Posted August 4, 2022 Share #4088 Posted August 4, 2022 Finally decided to go from 7.0 to 7.1 today on my Gen8 bare metal and it's been a steep learning curve! I now know a lot more about satamaps than I ever wanted too. Quick question though - I'm using ds3615xs because I thought my CPU - e3-1220v2 -couldn't handle anything newer - but I've seen some people using the 3622xs+ build on the Gen8. How is this possible? Can I just run through TCRP loader again, and select the 3622 instead? Quote Link to comment Share on other sites More sharing options...
rojoone2 Posted August 4, 2022 Share #4089 Posted August 4, 2022 1 hour ago, profet said: Finally decided to go from 7.0 to 7.1 today on my Gen8 bare metal and it's been a steep learning curve! I now know a lot more about satamaps than I ever wanted too. Quick question though - I'm using ds3615xs because I thought my CPU - e3-1220v2 -couldn't handle anything newer - but I've seen some people using the 3622xs+ build on the Gen8. How is this possible? Can I just run through TCRP loader again, and select the 3622 instead? DS3615 is becoming outdated and DS3622xs+ installs on most hardware. Try a new build with a spare hard drive. If it’s successful on your hardware you can migrate the DS3615 to DS3622 1 Quote Link to comment Share on other sites More sharing options...
Bullseye Posted August 5, 2022 Share #4090 Posted August 5, 2022 Anybody have same feeling, that 7.1 is much slower when i copy file over LAN than on 6.2.3 ? On 6.2.3 i have almost 90MB/s, on 7.1 i have less than 10MB/s. Quote Link to comment Share on other sites More sharing options...
flyride Posted August 5, 2022 Share #4091 Posted August 5, 2022 5 hours ago, Bullseye said: Anybody have same feeling, that 7.1 is much slower when i copy file over LAN than on 6.2.3 ? On 6.2.3 i have almost 90MB/s, on 7.1 i have less than 10MB/s. You don't suppose after all this development that someone would have noticed a 90% speed decrease? There is some other problem, it's not 7.1 or RedPill. 2 2 Quote Link to comment Share on other sites More sharing options...
Hemin Posted August 5, 2022 Share #4092 Posted August 5, 2022 On 8/2/2022 at 8:53 PM, loomes said: No rploader update needed. Install Update4 an it will reboot fine. I think "./rploader.sh postupdate <yourplatform>" is a must if you don't want a bootloop after update Quote Link to comment Share on other sites More sharing options...
Bullseye Posted August 5, 2022 Share #4093 Posted August 5, 2022 On 8/5/2022 at 9:08 PM, flyride said: You don't suppose after all this development that someone would have noticed a 90% speed decrease? There is some other problem, it's not 7.1 or RedPill. Was my mistake I connect via cheap WiFi 1$ thats why i have that speed Now its quite good, around 60MB/s. Only i have problem with DVA3221 that not recognizes objects everything works, but i dont have any obiect detected Quote Link to comment Share on other sites More sharing options...
loomes Posted August 6, 2022 Share #4094 Posted August 6, 2022 17 hours ago, Hemin said: I think "./rploader.sh postupdate <yourplatform>" is a must if you don't want a bootloop after update It dosnt matter what you think I have done it without the need of postupdate. When no Kernel/Boot Files are touched by the Updates postupdate is not needed. Quote Link to comment Share on other sites More sharing options...
Hemin Posted August 6, 2022 Share #4095 Posted August 6, 2022 (edited) Hello, It's possible to avoid that the loader modify these lines every time I reboot the machine? "synoinfo": { ... "rss_server": "http://example.com/null.xml", "rss_server_ssl": "https://example.com/null.xml", "small_info_path": "https://example.com/null", "updateurl": "http://example.com/", "myds_region_api_base_url": "https://example.com" I can't find the config file on the tc folder to delete these lines and if i modify the synoinfo.conf the config is rewrite every time I reboot I Know that is not a good practice, but needed for some API features on Home Assistant domotic software Edited August 6, 2022 by Hemin Quote Link to comment Share on other sites More sharing options...
pocopico Posted August 6, 2022 Author Share #4096 Posted August 6, 2022 (edited) 19 minutes ago, Hemin said: Hello, It's possible to avoid that the loader modify these lines every time I reboot the machine? "synoinfo": { ... "rss_server": "http://example.com/null.xml", "rss_server_ssl": "https://example.com/null.xml", "small_info_path": "https://example.com/null", "updateurl": "http://example.com/", "myds_region_api_base_url": "https://example.com" I can't find the config file on the tc folder to delete these lines and if i modify the synoinfo.conf the config is rewrite every time I reboot I Know that is not a good practice, but needed for some API features on Home Assistant domotic software You need to edit the config file under /home/tc/redpill-load/config/platform/config.json E.g https://github.com/pocopico/redpill-load/blob/develop/config/DS3622xs%2B/7.1.0-42661/config.json remove all example.com entries Edited August 6, 2022 by pocopico 2 1 Quote Link to comment Share on other sites More sharing options...
Ian Munro Posted August 6, 2022 Share #4097 Posted August 6, 2022 I am not sure if I am posting in the correct forum, so apologies if not. I have an existing XPEnology 6.2 install on a Dell R420 server with two HDD's attached to a PERC H710 Mini in RAID mode. I have previously tried a baremetal upgrade to DSM 7.1.0 without success. I tried adding the mpt3sas extension, but it doesn't see the drives. I figured that I could solve that problem by running a hypervisor and virtualizing the controller. I am running VMWare ESXi 7.03Uf3 on a separate HDD attached to the H710. I configure and boot the tcrp 0.8 loader. I can see the VM and I can login to SynologyNAS on port 7681. I don't understand the timeout waiting for /dev/synoboot. It looks as if it sees both of the data drives and the tcrp VMDK drive. Can someone help me figure this out? SynologyNAS> cat /var/log/junior_reason Exit on error [99] rp ext init exec failure... SynologyNAS> ls /dev/synoboot ls: /dev/synoboot: No such file or directory SynologyNAS> cat /var/log/*rc* START /linuxrc.syno.impl Insert Marvell 1475 SATA controller driver Insert basic USB modules... :: Loading module usb-common ... [ OK ] :: Loading module usbcore ... [ OK ] :: Loading module ehci-hcd ... [ OK ] :: Loading module ehci-pci ... [ OK ] :: Loading module xhci-hcd ... [ OK ] :: Loading module xhci-pci ... [ OK ] :: Loading module usb-storage ... [ OK ] :: Loading kernel modules from extensions ... Loading kmod #0 "mpt3sas.ko" for pocopico.mpt3sas (args: ) Loading kmod #0 "virtio.ko" for pocopico.v9fs (args: ) Loading kmod #1 "virtio_ring.ko" for pocopico.v9fs (args: ) Loading kmod #2 "virtio_mmio.ko" for pocopico.v9fs (args: ) Loading kmod #3 "virtio_pci.ko" for pocopico.v9fs (args: ) Loading kmod #4 "virtio_blk.ko" for pocopico.v9fs (args: ) Loading kmod #5 "virtio_net.ko" for pocopico.v9fs (args: ) Loading kmod #6 "virtio_scsi.ko" for pocopico.v9fs (args: ) Loading kmod #7 "9pnet.ko" for pocopico.v9fs (args: ) Loading kmod #8 "9pnet_virtio.ko" for pocopico.v9fs (args: ) Loading kmod #9 "9p.ko" for pocopico.v9fs (args: ) Loading kmod #0 "vmxnet3.ko" for pocopico.vmxnet3 (args: ) :: Loading kernel modules from extensions ... [ OK ] :: Executing "on_boot" custom scripts ... Running "check-mpt3sas.sh" for pocopico.mpt3sas->on_boot Loading module mpt3sas -> Module mpt3sas loaded succesfully Ran "check-mpt3sas.sh" for pocopico.mpt3sas->on_boot - exit=0 Running "check-v9fs.sh" for pocopico.v9fs->on_boot Loading module 9pnet -> Module 9pnet loaded succesfully Ran "check-v9fs.sh" for pocopico.v9fs->on_boot - exit=0 Running "check-vmxnet3.sh" for pocopico.vmxnet3->on_boot Loading module vmxnet3 -> Module vmxnet3 loaded succesfully Ran "check-vmxnet3.sh" for pocopico.vmxnet3->on_boot - exit=0 Running "boot-wait.sh" for redpill-boot-wait->on_boot Still waiting for boot device (waited 1 of 30 seconds) Still waiting for boot device (waited 2 of 30 seconds) Still waiting for boot device (waited 3 of 30 seconds) Still waiting for boot device (waited 4 of 30 seconds) Still waiting for boot device (waited 5 of 30 seconds) Still waiting for boot device (waited 6 of 30 seconds) Still waiting for boot device (waited 7 of 30 seconds) Still waiting for boot device (waited 8 of 30 seconds) Still waiting for boot device (waited 9 of 30 seconds) Still waiting for boot device (waited 10 of 30 seconds) Still waiting for boot device (waited 11 of 30 seconds) Still waiting for boot device (waited 12 of 30 seconds) Still waiting for boot device (waited 13 of 30 seconds) Still waiting for boot device (waited 14 of 30 seconds) Still waiting for boot device (waited 15 of 30 seconds) Still waiting for boot device (waited 16 of 30 seconds) Still waiting for boot device (waited 17 of 30 seconds) Still waiting for boot device (waited 18 of 30 seconds) Still waiting for boot device (waited 19 of 30 seconds) Still waiting for boot device (waited 20 of 30 seconds) Still waiting for boot device (waited 21 of 30 seconds) Still waiting for boot device (waited 22 of 30 seconds) Still waiting for boot device (waited 23 of 30 seconds) Still waiting for boot device (waited 24 of 30 seconds) Still waiting for boot device (waited 25 of 30 seconds) Still waiting for boot device (waited 26 of 30 seconds) Still waiting for boot device (waited 27 of 30 seconds) Still waiting for boot device (waited 28 of 30 seconds) Still waiting for boot device (waited 29 of 30 seconds) Still waiting for boot device (waited 30 of 30 seconds) ERROR: Timeout waiting for /dev/synoboot device to appear. Most likely your vid/pid configuration is not correct, or you don't have drivers needed for your USB/SATA controller ========== BEGIN DUMP OF ALL PARTITIONS DETECTED =========== /dev/sda1 2048 4982527 4980480 fd /dev/sda2 4982528 9176831 4194304 fd /dev/sda3 9437184 9766232063 9756794880 fd /dev/sdb1 2048 4982527 4980480 fd /dev/sdb2 4982528 9176831 4194304 fd /dev/sdb3 9437184 9766232063 9756794880 fd /dev/sdq1 2048 100351 98304 83 /dev/sdq2 100352 253951 153600 83 /dev/sdq3 253952 2097151 1843200 83 ========== END OF DUMP OF ALL PARTITIONS DETECTED ========== Ran "boot-wait.sh" for redpill-boot-wait->on_boot - exit=1 Running "install_rd.sh" for redpill-misc->on_boot Starting ttyd, listening on port: 7681 Ran "install_rd.sh" for redpill-misc->on_boot - exit=0 ERROR: Some of the scripts failed! See above for any with exit != 0 :: Executing "on_boot" custom scripts ... [ OK ] Exit on error [99] rp ext init exec failure... Sat Aug 6 21:01:34 UTC 2022 none /sys/kernel/debug debugfs rw,relatime 0 0 Quote Link to comment Share on other sites More sharing options...
phone guy Posted August 6, 2022 Share #4098 Posted August 6, 2022 (edited) On 8/5/2022 at 9:08 AM, flyride said: You don't suppose after all this development that someone would have noticed a 90% speed decrease? There is some other problem, it's not 7.1 or RedPill. I have a kind of related question for everybody.... I have a proxmox redpill DS3622 build. Running paravirtual NIC in Proxmox with V9F ext drivers. I also have a PCI passthru Ethernet port, I used one of the intel ports onboard from the server motherboard. Both work fine, the Intel NIC in pci pass thru didn't require any additional ext drivers to work. Each has its own different IP, they are not bonded, so I know which port I am using. I am getting different smb speeds when copying over the network in Windows. Scenario 1: In windows, open network, open icon for DS3622, open temp shared folder, now drag and drop 1.1gb file.. I get a maximum transfer of 60mb/sec (\\ds3622\temp) Scenario 2: Change location in windows explorer to direct ip (\\192.168.1.100\temp) I get 110mb/sec. The proxmox virtual nic is ip 100, and the pci passthru is ip 101 (\\192.168.1.101\temp), same speeds on either direct ip. So if the window shows a direct ip in the location, the speed is nearly doubled. If it show ds3622 its about half speed...? any clue? This is a repeatable experiment. I get similar results from different pcs on the lan, different files, and the results almost always the same, give or take a few mbs/sec Edited August 6, 2022 by phone guy Quote Link to comment Share on other sites More sharing options...
Tone Posted August 7, 2022 Share #4099 Posted August 7, 2022 Hi guys, Don't know if this is the proper place to ask for it so here we go: I'm trying to do a clean installation to DSM 7.1.0-42661 but with no success... I always get stuck at 73% of installation and then reboots with a 10 min counter, once is rebooted the installation prompt is shown again. I used broadwellnk architecture to build the loader so the model version used is DS3622xs+, just in case I used the default choice for satamap assignation which is in the image attached, something weird to me since I got 4 SATA ports, not 8 and It states as 0 drives which I don't know if its correct or not. This is my user_config: { "extra_cmdline": { "pid": "0x6545", "vid": "0x0930", "sn": "2030SQRMN5HWZ", "mac1": "70106FCA609E", "SataPortMap": "18", "DiskIdxMap": "0001" }, "synoinfo": { "internalportcfg": "0xffff", "maxdisks": "16", "support_bde_internal_10g": "no", "support_disk_compatibility": "no", "support_memory_compatibility": "no" }, "ramdisk_copy": {} } My setup is a HPE ProLiant Microserver Gen10 with a CPU: AMD Opteron X3216 which I think it's a pretty common setup in XPE world. Regards Quote Link to comment Share on other sites More sharing options...
Hemin Posted August 7, 2022 Share #4100 Posted August 7, 2022 16 hours ago, pocopico said: You need to edit the config file under /home/tc/redpill-load/config/platform/config.json E.g https://github.com/pocopico/redpill-load/blob/develop/config/DS3622xs%2B/7.1.0-42661/config.json remove all example.com entries Hi pocopico, I don't have this folder on /home/tc. I have connected with winscp to the TC filesystem and on /home/tc I have some configuration files, 5 folders, 4 hidden "fltk", "local", "wmx", "X.d" and 1 not hidden named "old". None of this folders have the config.json file sorry I'm doing something wrong? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.