cqranjiian Posted September 6, 2021 Share #976 Posted September 6, 2021 @tocinillo2 My motherboard has only four SATAS, so how should I set them? DiskIdxMap=? SataPortMap=? SasIdxMap=? Link to comment Share on other sites More sharing options...
titoum Posted September 6, 2021 Share #977 Posted September 6, 2021 i wanted to give it a try. so setup: [CM] Asus P8H77-I [CPU] Intel Core i3 3225 [NIC] Intel Gigabit ET Dual Port Srvr Adptr Server Adapter PCI-e x4 2x Gigabit Port loader: docker script from haydibe in version 7.2 bromollow / DSM 7.0.1 i had a first issue complaining about hard drive error. i had to switch hot plug support in bios and then it went further. now, i am hitting the 56% error about file being corrupted. i would guess that it is related that i plugged the spare hdd on sata3 instead of 1 ? vid/pid are correct as same used for jun's loader leave me still some spare time before official stable release will be available Link to comment Share on other sites More sharing options...
WiteWulf Posted September 6, 2021 Share #978 Posted September 6, 2021 (edited) 19 hours ago, Rikk said: Hello to all, I am trying to test the loader on my current hardware and I am stuck to a stupid step : my system didn't find the USB key to boot on it. With the previous setup (Jun's loader with 3615xs model, 6.2.3 DSM) it was working well. My hardware is : Gen8 HP microserver with Xeon E3-1220L CPU update 6Gb of RAM I am using le last env (redpill-tool-chain_x86_64_v0.7.2) to build the image with MAC OS big sur platform., and docker installed. Hi Rikk, I can't help, I'm afraid, beyond commenting that I'm in the same situation as you: build runs successfully on macOS Big Sur in Docker, I try booting from the same internal USB port I'm using for my Jun's loader USB stick but the Microserver apparently doesn't see the stick as bootable and tries to netboot. I've confirmed that the same redpill usb stick successfully boots on other hardware (an old Toshiba R600 laptop). More details here. It's very odd... Edited September 6, 2021 by WiteWulf Link to comment Share on other sites More sharing options...
jumkey Posted September 6, 2021 Share #979 Posted September 6, 2021 1 hour ago, titoum said: i wanted to give it a try. so setup: [CM] Asus P8H77-I [CPU] Intel Core i3 3225 [NIC] Intel Gigabit ET Dual Port Srvr Adptr Server Adapter PCI-e x4 2x Gigabit Port loader: docker script from haydibe in version 7.2 bromollow / DSM 7.0.1 i had a first issue complaining about hard drive error. i had to switch hot plug support in bios and then it went further. now, i am hitting the 56% error about file being corrupted. i would guess that it is related that i plugged the spare hdd on sata3 instead of 1 ? vid/pid are correct as same used for jun's loader leave me still some spare time before official stable release will be available mount img and check is there have folder efi/efi/boot/ with file synobootloader.conf change /efi/efi/boot/->/efi/boot/ 1 Link to comment Share on other sites More sharing options...
hoangminh88 Posted September 6, 2021 Share #980 Posted September 6, 2021 Tested Boot on mSata (unplug USB Drive) Worked perfect! Motherboard China CPU J1900 mSata SSD 16GB Buffalo Link to comment Share on other sites More sharing options...
sanyi65 Posted September 6, 2021 Share #981 Posted September 6, 2021 My system didn't boot from the USB key. I set the USB first partition active (with Minitool Partition Wizard) and then I could boot. 1 Link to comment Share on other sites More sharing options...
mcdull Posted September 6, 2021 Share #982 Posted September 6, 2021 I tried 3615 image in my old qnap. But it does not boot properly. In GRUB> whenever I press enter, it will reboot by itself. Link to comment Share on other sites More sharing options...
WiteWulf Posted September 6, 2021 Share #983 Posted September 6, 2021 (edited) 32 minutes ago, sanyi65 said: My system didn't boot from the USB key. I set the USB first partition active (with Minitool Partition Wizard) and then I could boot. That worked perfectly! Feel stupid now for missing something so simple. @Rikk this should work for you, too. Now attempting to install 6.2.4 baremetal... *edit* Failed "file is probably corrupted", so I need to check vid/pid, etc. At least I can get it to boot now. Edited September 6, 2021 by WiteWulf Link to comment Share on other sites More sharing options...
titoum Posted September 6, 2021 Share #984 Posted September 6, 2021 (edited) 57 minutes ago, jumkey said: mount img and check is there have folder efi/efi/boot/ with file synobootloader.conf change /efi/efi/boot/->/efi/boot/ that is so weird ! G:\EFI\EFI\boot then SynoBootLoader.conf SynoBootLoader.efi G:\EFI\BOOT then BOOTX64.EFI Do i just merge all into the eif/boot ? Edited September 6, 2021 by titoum Link to comment Share on other sites More sharing options...
jumkey Posted September 6, 2021 Share #985 Posted September 6, 2021 21 minutes ago, titoum said: Do i just merge all into the eif/boot ? yes Link to comment Share on other sites More sharing options...
titoum Posted September 6, 2021 Share #986 Posted September 6, 2021 (edited) 3 minutes ago, jumkey said: yes should it be EFI or efi as you mentionned? just did another run and same error at 56%. thank you. Edited September 6, 2021 by titoum Link to comment Share on other sites More sharing options...
snowfox Posted September 6, 2021 Share #987 Posted September 6, 2021 Hi, how i add the 10G card and nvme SSD? in my Asrock J5005-ITX boot with 7.0.1 ,it can't find intel 10G network card and NVME SSD Link to comment Share on other sites More sharing options...
ghtester Posted September 6, 2021 Share #988 Posted September 6, 2021 21 hours ago, Rikk said: Hello to all, I am trying to test the loader on my current hardware and I am stuck to a stupid step : my system didn't find the USB key to boot on it. With the previous setup (Jun's loader with 3615xs model, 6.2.3 DSM) it was working well. My hardware is : Gen8 HP microserver with Xeon E3-1220L CPU update ... ... The image is written on USB key with BalenaEtcher Did I am missing something ? Help will be appreciate. Thanks ! Rikk Check if you have first partition marked as Active on your USB key (or set it directly). I have imaged the USB key with balenaEtcher as well but the first partition was NOT active and therefore on some computers it could not boot (may depend on BIOS type). For instance you may do it on Windows machine with attached USB Key: C:\>diskpart Microsoft DiskPart version 10.0.17763.1 Copyright (C) Microsoft Corporation. On computer: Workstation DISKPART> sel disk 1 Disk 1 is now the selected disk. DISKPART> list disk Disk ### Status Size Free Dyn Gpt -------- ------------- ------- ------- --- --- Disk 0 Online 243 GB 1024 KB * Disk 1 Online 7488 MB 7360 MB DISKPART> list part Partition ### Type Size Offset ------------- ---------------- ------- ------- Partition 1 Primary 48 MB 1024 KB Partition 2 Primary 75 MB 49 MB Partition 3 Primary 4096 KB 124 MB DISKPART> sel part 1 Partition 1 is now the selected partition. DISKPART> active DiskPart marked the current partition as active. DISKPART> exit Leaving DiskPart... Link to comment Share on other sites More sharing options...
WiteWulf Posted September 6, 2021 Share #989 Posted September 6, 2021 FYI, if you need to set the partition as active on your USB stick and you're using macOS, it's non-obvious how to do this. Here's a howto: https://hackintoshmumbai.com/how-to-set-up-your-partition-active-using-fdisk-in-mac-os-x/ Link to comment Share on other sites More sharing options...
D.S Posted September 6, 2021 Share #990 Posted September 6, 2021 2 hours ago, snowfox said: Hi, how i add the 10G card and nvme SSD? in my Asrock J5005-ITX boot with 7.0.1 ,it can't find intel 10G network card and NVME SSD No driver for 10G Lan Card yet and the old patch for nvme isn't work anymore, both have to wait for update. I have the same issue as well. Link to comment Share on other sites More sharing options...
Orphée Posted September 6, 2021 Share #991 Posted September 6, 2021 vmxnet3 driver for DSM7 would be cool Link to comment Share on other sites More sharing options...
Aigor Posted September 6, 2021 Share #992 Posted September 6, 2021 11 minutes ago, Orphée said: vmxnet3 driver for DSM7 would be cool you haved to add openvmtools via spk ti have vmxnet3 1 Link to comment Share on other sites More sharing options...
Orphée Posted September 6, 2021 Share #993 Posted September 6, 2021 (edited) 6 minutes ago, Aigor said: you haved to add openvmtools via spk ti have vmxnet3 I may be wrong but not available yet for DSM7. https://github.com/NeverEatYellowSwissSnow/synology-dsm-open-vm-tools/issues/3 https://github.com/SynoCommunity/spksrc/issues/4170 Edited September 6, 2021 by Orphée Link to comment Share on other sites More sharing options...
Aigor Posted September 6, 2021 Share #994 Posted September 6, 2021 3 minutes ago, Orphée said: I may be wrong but not available yet for DSM7. Yes, but could be a occasion to add openvmtools into spksrc framework for DSM7 spksrc is a framework to simplify the porting process of linux packages into DSM environment, there is already a github repos for spksrc and opnevmtools for synology, adding both we could have a new package for dsm7 Link to comment Share on other sites More sharing options...
pocopico Posted September 6, 2021 Share #995 Posted September 6, 2021 (edited) 1 hour ago, Orphée said: vmxnet3 driver for DSM7 would be cool Like i said i have compiled it and verified that the vmxnet driver works on DSM7.0/7.01 You should though put it in your loader /usr/lib/modules and modify linuxrc.syno.impl (of rd.gz) so it will be loaded during boot time. Best line number to add insmod /lib/modules/XXX.ko is 285 vmxnet3.7z Edited September 6, 2021 by pocopico 1 3 Link to comment Share on other sites More sharing options...
Orphée Posted September 6, 2021 Share #996 Posted September 6, 2021 (edited) 31 minutes ago, pocopico said: Like i said i have compiled it and verified that the vmxnet driver works on DSM7.0/7.01 You should though put it in your loader /usr/lib/modules and modify linuxrc.syno.impl so it will be loaded during boot time. Best line number to add insmod /lib/modules/XXX.ko is 285 vmxnet3.7z 200.23 kB · 2 downloads Ho do you manage rd.gz file ? do you just untar it with 7z and build a new gzip file ? as the original is cpio ... Thanks Edit : nevermind Edited September 6, 2021 by Orphée Link to comment Share on other sites More sharing options...
s2k7 Posted September 6, 2021 Share #997 Posted September 6, 2021 38 minutes ago, pocopico said: Like i said i have compiled it and verified that the vmxnet driver works on DSM7.0/7.01 You should though put it in your loader /usr/lib/modules and modify linuxrc.syno.impl (of rd.gz) so it will be loaded during boot time. Best line number to add insmod /lib/modules/XXX.ko is 285 vmxnet3.7z 200.23 kB · 4 downloads How did u build? Tried with no success. Link to comment Share on other sites More sharing options...
pocopico Posted September 6, 2021 Share #998 Posted September 6, 2021 3 minutes ago, Orphée said: Ho do you manage rd.gz file ? do you just untar it with 7z and build a new gzip file ? as the original is cpio ... Thanks To extract : mkdir rd cd rd cat ../rd.gz | cpio -idm To repack the rd, in rd directory : find | cpio -o -H newc > ../rd.gz.new Link to comment Share on other sites More sharing options...
pocopico Posted September 6, 2021 Share #999 Posted September 6, 2021 23 minutes ago, s2k7 said: How did u build? Tried with no success. Not very difficult .. In order to compile your modules for 3.10.108 download standard kernel sources : https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/snapshot/linux-3.10.108.tar.gz or just clone latest stable and # git checkout v3.10.108 copy the .config from the bromolow/apollolake sources to the folder you have the kernel sources that you downloaded, make menuconfig and select the modules you want to compile and the end run make modules. Pay attention to the module dependencies (run modinfo xxx.ko ) as you might need modules to be loaded before that. e.g. module tg3.ko (tigon) depends on libphy.ko, so you need to first load libphy.ko and then tg3.ko. Not all modules have dependencies, but some do. 1 Link to comment Share on other sites More sharing options...
Orphée Posted September 6, 2021 Share #1000 Posted September 6, 2021 2 minutes ago, pocopico said: Not very difficult .. In order to compile your modules for 3.10.108 download standard kernel sources : https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/snapshot/linux-3.10.108.tar.gz or just clone latest stable and # git checkout v3.10.108 copy the .config from the bromolow/apollolake sources to the folder you have the kernel sources that you downloaded, make menuconfig and select the modules you want to compile and the end run make modules. Pay attention to the module dependencies (run modinfo xxx.ko ) as you might need modules to be loaded before that. e.g. module tg3.ko (tigon) depends on libphy.ko, so you need to first load libphy.ko and then tg3.ko. Not all modules have dependencies, but some do. I added the vmxnet3.ko in /usr/lib/modules added in line 285 insmod /lib/modules/vmxnet3.ko But it does not seems to add it... Not loaded No network access if I do after with telnet : insmod /usr/lib/modules/vmxnet3.ko : # insmod vmxnet3.ko [ 379.994870] VMware vmxnet3 virtual NIC driver - version 1.1.30.0-k-NAPI [ 379.996016] vmxnet3 0000:03:00.0: # of Tx queues : 2, # of Rx queues : 2 [ 379.997886] vmxnet3 0000:03:00.0: irq 74 for MSI/MSI-X [ 379.998765] vmxnet3 0000:03:00.0: irq 75 for MSI/MSI-X [ 379.999805] vmxnet3 0000:03:00.0: irq 76 for MSI/MSI-X [ 380.001417] vmxnet3 0000:03:00.0 eth0: NIC Link is Up 10000 Mbps but can't activate dhcp # dhclient eth0 [ 439.463738] type=1400 audit(1630939202.680:8): apparmor="DENIED" operation="mknod" parent=13865 profile="/usr/sbin/dhclient" name="/var/db/dhclient.leases" pid=13866 comm="dhclient" requested_mask="c" denied_mask="c" fsuid=0 ouid=0 [ 439.467297] type=1400 audit(1630939202.684:9): apparmor="DENIED" operation="exec" parent=13866 profile="/usr/sbin/dhclient" name="/etc/dhclient/dhclient-script" pid=13867 comm="dhclient" requested_mask="x" denied_mask="x" fsuid=0 ouid=0 Link to comment Share on other sites More sharing options...
Recommended Posts