ghtester

Transition Members
  • Content Count

    18
  • Joined

  • Last visited

Community Reputation

3 Neutral

About ghtester

  • Rank
    Newbie

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

  1. Thank you for another attempt, tried on the same (a bit improper) hardware with the same (crash) result. I'll try to put the module to bootloader and test on baremetal which has ICH7 controller. [ 342.304251] WARNING: module 'ata_piix' built without retpoline-enabled compiler, may affect Spectre v2 mitigation [ 342.316049] ata_piix 0000:00:1f.5: version 2.13 [ 342.321262] ata_piix 0000:00:1f.5: MAP [ [ 342.325649] P0 -- P1 -- ] [ 342.479052] BUG: unable to handle kernel NULL pointer dereference at 000000000000001b [ 342.480013] IP: [<ffffffffa0ef6dc7>] piix_i
  2. Thanks again, this module can be load but leads to crash so I suppose it was compiled with generic kernel 3.10.108 sources. I tried that as well (and none of modules I needed was working) but as already confirmed by @ThorGroup, this is not a proper way (although maybe some drivers can work). insmod ata_piix/ata_piix.ko Killed [91701.976157] WARNING: module 'ata_piix' built without retpoline-enabled compiler, may affect Spectre v2 mitigation [91701.987932] ata_piix 0000:00:1f.5: version 2.13 [91701.993164] ata_piix 0000:00:1f.5: MAP [ [91701.997551] P0 -- P1 -- ] [91702
  3. Thank you but it does not work for bromolow - the correct version magic is 3.10.108 SMP ( 3.10.108 #42214 SMP Sat Aug 28 02:41:43 CST 2021 x86_64 GNU/Linux synology_bromolow_3615xs), not 3.10.108+ SMP mod_unload That's why load attempt leads to error message: insmod: ERROR: could not insert module ata_piix/ata_piix.ko: Invalid module format So the question is still the same - is there anybody who could share a compilation command with proper parameters I should use to compile bromolow modules for DSM 7.0.1 RC with toolchain only please?
  4. Yes I know but I don't know how to get (compile) necessary modules with toolkit/toolchain only, without kernel sources (can anybody share a command with specific parameters to get - for instance - the ata_piix.ko compiled (ich7 sata support - CONFIG_ATA_PIIX) without kernel sources and working in DSM 7.0.1 (based on kernel 3.10.108) on bromolow/ DS3615xs ?).
  5. AFAIK 2543branch/bromolow-source is 3.10.105, as 3.10.108 was not published yet. I wonder which parameters for compilation with toolchain you are using to get working .ko modules for DSM 7.0.1 RC. I have always failed - despite the compilation was finished, the bromolow modules were unusable for me. With 2543branch sources the compiled modules have 3.10.105 magic and when the common kernel sources 3.10.108 are used, there're kernel exceptions when I try to load modules. On the other side, there are some working network drivers for bromolow & DSM 7.0.1 shared here earlier by some peopl
  6. I can confirm working DS3615xs_7.0.1-42214 as VM on ESXi 6.0, using bootloader compiled recently with @haydibe's great tool 0.7.3. The VM configuration - latest virtual hardware available in ESXi 6.0, custom config - Guest OS Family = Other, Guest OS Version = Other (64-bit), 1 socket - 2 CPU, Memory 2048, Network Adapter E1000e, add 2 SATA controlleres, HDD1=bootloader-SATA 1:0, HDD2=OS-SATA0:0. In VM BIOS changed boot order to HDD2. Bootloader - select SATA boot. Bootloader cmdline used / changed - syno_hdd_detect=1 DiskIdxMap=0 SataPortMap=12 SasIdxMap=0 HddHotplug=1
  7. Now compiled the 3615 bootloader succesfully but did not test an installation yet.
  8. Exactly, the docker from @haydibe is a great tool and hopefully he'll be able to find some free time to update the scripts later. BTW. I am already testing DSM 7.0.1 installed on veteran baremetal HP ML110G5 using bromolow-7.0.1-42214 bootloader compiled couple days ago. Seems to be working fine but I had to install a supported network card (E100E compatible as I am not still able to properly compile a necessary modules with bromolow toolchain). Also it was necessary to enable RAID in BIOS and put DiskIdxMap=00 SataPortMap=4 SasIdxMap=0 mapping to cmdline.
  9. The almost exactly the same issue here, I just get a slightly different output but in general it also fails with: *** Please tell me who you are.
  10. 'they should' is absolute correct but they don't care much about it for years... They'll do it sometimes but it'll take some (and usually a quite long) time...
  11. Well, I did not try to compile kernel, just modules but many of them - mostly for network cards - all Broadcom modules, Realtek network cards support, also support for wireless USB network cards, modules for UVC video etc... As there are dependencies, perhaps selecting many modules made the compilation useless (despite compilation finished OK). Or I made some mistake... Thanks for your offer, I'll try again and when it fails, I'll ask you later for help, at least with some mostly wanted modules...
  12. Unfortunately this is a generic source which did not work for me. Synology has patched kernel sources and they usually publish them with a huge delay. At the usual location ( https://sourceforge.net/projects/dsgpl/files/Synology NAS GPL Source/ ) I could not find the 7.0.1 sources so far.
  13. I have the same issue, tried to compile some modules with generic sources & synoconfig file for bromolow but compiled modules are useless - segmentation faults etc...
  14. Check if you have first partition marked as Active on your USB key (or set it directly). I have imaged the USB key with balenaEtcher as well but the first partition was NOT active and therefore on some computers it could not boot (may depend on BIOS type). For instance you may do it on Windows machine with attached USB Key: C:\>diskpart Microsoft DiskPart version 10.0.17763.1 Copyright (C) Microsoft Corporation. On computer: Workstation DISKPART> sel disk 1 Disk 1 is now the selected disk. DISKPART> list disk Disk ### Status Si