Polanskiman

Please read the READ ME topic before posting:

 

Message added by Polanskiman

Recommended Posts

- Outcome of the installation/update: SUCCESSFUL

- DSM version prior update: DSM 6.2.1-23824 update 6

- Loader version and model: JUN'S LOADER v1.03b - DS3617xs

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - Asrock J3455

- Additional comments: Onboard lan not tested, all ok with PCIE Intel NIC.

Share this post


Link to post
Share on other sites

 

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.2.1-23824 update 6

- Loader version and model: JUN'S LOADER v1.03b - DS3615xs

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - Supermicro X10SL7-F-0 with both SATA (6 ports) and SAS (8 ports - LSI2308) and dual onboard Intel (i210AT) NICs.

- Additional comments: fastest System update ever; seems to be operating normally; also updated several of the apps that were showing as outdated.

Share this post


Link to post
Share on other sites

Outcome of the update: SUCCESSFUL

DSM version prior to update: DSM 6.2.1 update 6

Loader version and model: Jun v1.03b - DS3615xs

 Installation type: BAREMETAL HP Proliant gen 8 + Intel NIC on PCIe

Share this post


Link to post
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior to update: DSM 6.2.1-23824 update 6

- Loader version and model: Jun v1.04b - DS918+

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - Asrock H370M-ITX/ac - i5-8400

Additional Notes: Reboot required after update. I never used the second NIC -so haven't tested it.

Share this post


Link to post
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior to update: DSM 6.2.1-23824U6

- Loader version and model: Jun v1.03b - DS3615xs

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - Intel Xeon E3-1270v2 - SuperMicro X9SCM-F - Mellanox Connect-X 3 - LSI 9201-16i
- Additional comment: I had to re-modify the synoinfo.conf file to enable more than 8 disks - after this was completed, the array came back up as normal.

Share this post


Link to post
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior to update: DSM 6.2.1-23824 Update 6

- Loader version and model: Jun v1.04b - DSDS918

- Installation type: VirtualBox on Windows 10 (1803; Threadripper 1950X; 64 GB RAM)

- Additional comment: VMVBox [ Other Linux 64 bit; 4 cores, 8 GB RAM; VMSVGA;  bridged LAN to host's Intel(R) I211 Gigabit adaptor; rest is vanilla VBox]

Share this post


Link to post
Share on other sites

- Outcome of the update: UNSUCCESSFUL

- DSM version prior to update: DSM 6.2.1-23824 Update6

- Loader version and model: Jun v1.04b - DS918

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - Terramaster F2-220

- Additional comment: Failure - no network (Realtek)

Share this post


Link to post
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior to update: DSM 6.2.1-23824 update 6

- Loader version and model: Jun v1.04b - DS918+

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - Supermicro X10sll-f -   E3-1225v3 CPU

Additional Notes: None

Share this post


Link to post
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior to update: DSM 6.2.1-23824 update 6

- Loader version and model: Jun v1.04b - DS918+

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - MSI B250m Mortar -   Pentium G4560

Additional Notes: None

Share this post


Link to post
Share on other sites

- Outcome of the installation/update: SUCCESSFUL

- DSM version prior update: DSM 6.2.2-24922

- Loader version and model: JUN'S LOADER v1.03b - DS3615xs

- Using custom extra.lzma: No

- Installation type:BAREMETAL - HP Proliant N54L

Share this post


Link to post
Share on other sites

- Outcome of the installation/update: SUCCESSFUL

- DSM version prior update:  DSM 6.2.2-24922

- Loader version and model: Jun v1.04b - DS918+

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - Intel Core i3-8100t   GIGA-BYTE  H370 AORUS GAMING 3 WIFI

Share this post


Link to post
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.2.1-23824 Update 6

- Loader version and model: Jun's loader v1.03b, DS3615xs

- Using custom extra.lzma: NO

- Installation type: VM - ESXi 6.5.0 Update 2 (Build 9298722) on Microserver Gen8

 

Share this post


Link to post
Share on other sites

- Outcome of the installation/update: UNSUCCESSFUL

- DSM version prior update: DSM 6.2.1-23824 update 6

- Loader version and model: JUN'S LOADER v1.04b - DS918+

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - Asrock J3455

- Additional comments: Not pinging after manual reboot.. Tried leaving it 10 mins, then rebooting again. Nothing. I did have a NIC Bond configured (maybe I should have removed the bond beforehand like I normally do).  I've tried switching the cables to other ports. Using only the PCIe NIC etc.. Nothing so far - currently troubleshooting, sigh..

Share this post


Link to post
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.2.1-23824 Update 6

- Loader version and model: Jun's Loader v1.03b - DS3615xs

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - HP Microserver N40L
- Additional comments: HP NC360T Dual NIC (disabled the embedded one)

 

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.2.1-23824 Update 6

- Loader version and model: Jun's Loader v1.03b - DS3615xs

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - HP Microserver Gen 8
- Additional comments: HP NC360T Dual NIC (disabled the embedded one)

Share this post


Link to post
Share on other sites

The outcome of the update: SUCCESSFUL

DSM version prior to update: DSM 6.2.1-23824U6

Loader version and model: Jun v1.04b - DS918

Using custom extra.lzma: NO

Installation type: BAREMETAL - ASUS Prime Z390-A - i3-8100 64GB Intel 10GbE NIC

Additional comments: I was not sure if it would work, so I added a spare disk, turned off, disconnected all but new disk, turned on, upgraded to 6.22, restarted confirmed working, turned off, reconnected all disks, turned on, repaired failed system partition, restarted, 100% OK!

 

Share this post


Link to post
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.2.1-23824 Update 6

- Loader version and model: Jun's Loader v1.03b - DS3615xs

- Using custom extra.lzma: NO

- Installation type: BAREMETAL Fujitsu-Siemens Esprimo P700 E85+ (I5+8 GB DDR3)

- Additional comments: No

Share this post


Link to post
Share on other sites

 Outcome of the update:  SUCCESSFUL

- DSM version before update: DSM 6.2.1-23824 Update 6

- Loader version and model: JUN'S LOADER v1.03b - DS3615xs

- Using custom extra.lzma: No

- Installation type: BAREMETAL - Dell Optiplex 980

- Additional comments: No.

Share this post


Link to post
Share on other sites

 

Outcome of the update:  SUCCESSFUL

- DSM version before update: DSM 6.2.2-24922

- Loader version and model: JUN'S LOADER v1.03b - DS3615xs

- Using custom extra.lzma: No

- Installation type: BAREMETAL - Fujitsu PRIMERGY TX120 S3p

- Additional comments: No

 

 

Adnotacja 2019-05-17 171655.jpg

  • Thanks 1

Share this post


Link to post
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior to update: DSM 6.2.1-23824 Update 6

- Loader version and model: Jun v1.04b - DS918

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - DELL POWEREDGE T20 Xeon E3-1225V3
- Additional comments: The update went seamless. It reboots ok and performs very well.

Synology Updates.PNG

Share this post


Link to post
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.2.1-23824 Update 6

- Loader version and model: Jun v1.04b - DS918+

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - Gigabyte H270N, Intel i3 7100T

- Additional comments: Reboot required

Share this post


Link to post
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.2.2-24922

- Loader version and model: Jun's Loader v1.04b DS918+

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - MSI B150M PRO-VD D3 

- Additional comments: reboot required

Share this post


Link to post
Share on other sites

- Outcome of the installation/update: SUCCESSFUL

- DSM version prior update: DSM 6.2.1-23824 Update 6

- Loader version and model: Jun's V1.04b - DS918+

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - DELL PowerEdge T30 with Intel Xeon

Share this post


Link to post
Share on other sites

 

- Outcome of the update: FAILED

- DSM version prior update: DSM 6.2.1-23824 Update 6

- Loader version and model: v1.04b DS918+

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - Asrock J3355M

- Additional comments: embedded Realtek and|or Intel 9301 both no link

 

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.2.1-23824 Update 6

- Loader version and model: Jun's  v1.03b DS3615xs

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - Asrock J3355M

- Additional comments: Legacy boot only, Realtek not work at all, everything else is fine. Migrated from 918.

 

Share this post


Link to post
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.2.1-23824U6

- Loader version and model: JUN'S LOADER v1.04b - DS918+ 

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - Intel Pentium G4560 / GiBy GA-B250-HD3P B250 / 8GB / LSI SAS 9211-8i (IT) / Intel Pro-1000/PT PCI-e Dual Port 

- Additional comments: REBOOT REQUIRED

Share this post


Link to post
Share on other sites

I have deleted yet again a bunch of posts that are not in line with the guidelines of this sub-forum. Please read the READ ME topics at the root of this sub-forum!

  • Thanks 1

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.