BlaBla1973

I'm using barematel for plex hardware transcoding. Is this possible using virtualization?

Nice, I found this "solution" for the file corruption (13) If you get the following error ”Failed to install the file. The file is probably corrupted. (13)” it means your VID and/or PID is wrong. If you are 200% sure that your VID/PID is correct and you still get that error message then try to 'Force Install' Or this one : When I had simialr problem, I successfully made this with NO STORED DATA LOSS: 1) Disconnect all the drives 2) Run the jun’s loader as reinstall 3) Find device by find.synology.com or Assistant – there were no drives in the system. 4) Leave browser’s Synology page opened, do not shut down device. 5) Plug disks back in (no matter, if the machine supports hotswap or not) 6) After a few minutes repeatedly refresh Synology’s page (see step 4) 7) After succesfuly loaded installation page reinstall system. Do not forget to check manual upgardes only. Notes: a) Stored files will be kept untouched, but apps, settings and other data will be removed. Settings can be restored via previously saved ones. b) If reinstallation crashes, reset your device and go through standard “1st time” instalation process.

- Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.2.3-25426 update 2 - Loader version and model: JUN'S LOADER v1.04b - DS918+ - Using custom extra.lzma: Yes, 0.11 for 6.2.3(HD sleep disabled) - Installation type: BAREMETAL - Intel Pentium G4560 / 8GB / GA-B250-HD3P / LSI SAS 9211-8i (IT) / Disks : 8 x 8TB WD & 4 x 4TB WD / Pro-1000/PT PCI-e Dual Port  - Additional comments: REBOOT REQUIRED / HW transcode works in Plex

- Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.2.3-25426 - Loader version and model: JUN'S LOADER v1.04b - DS918+ - Using custom extra.lzma: Yes, 0.11 for 6.2.3(HD sleep disabled) - Installation type: BAREMETAL - Intel Pentium G4560 / 8GB / GA-B250-HD3P / LSI SAS 9211-8i (IT) / Disks : 8 x 8TB WD & 4 x 4TB WD / Pro-1000/PT PCI-e Dual Port  - Additional comments: REBOOT REQUIRED / HW transcode works in Plex

- Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.2.3-25423 - Loader version and model: JUN'S LOADER v1.04b - DS918+ - Using custom extra.lzma: Yes, 0.11 for 6.2.3 - Installation type: BAREMETAL - Intel Pentium G4560 / GiBy GA-B250-HD3P B250 / 8GB / LSI SAS 9211-8i (IT) / Intel Pro-1000/PT PCI-e Dual Port  - Additional comments: REBOOT REQUIRED / HW transcode works in Plex

I tested your 0.11 on my xpenology baremetal, SMART info works on 9211-8i and internal sata. Thx

I'm using a bare matel install.

I can confirm this, Hardware transcoding works well (G4560 and B250)updated extra.lzma on usb after upgrading to 6.2.3 the only problem , no smart info from hard drives on the LSI SAS 9211-8i (IT), boot/reboot works fine

Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.2.2-24922-update 6 - Loader version and model: JUN'S LOADER v1.04b - DS918+ - Using custom extra.lzma: NO - Installation type: BAREMETAL - Intel Pentium G4560 / GiBy GA-B250-HD3P B250 / 8GB / LSI SAS 9211-8i (IT) / Intel Pro-1000/PT PCI-e Dual Port  - Additional comments: REBOOT REQUIRED / Important! - After installation of DSM 6.2.3 PLEX HW Transcoding had been disabled

Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.2.2-24922-update 5 - Loader version and model: JUN'S LOADER v1.04b - DS918+ - Using custom extra.lzma: NO - Installation type: BAREMETAL - Intel Pentium G4560 / GiBy GA-B250-HD3P B250 / 8GB / LSI SAS 9211-8i (IT) / Intel Pro-1000/PT PCI-e Dual Port  - Additional comments: REBOOT REQUIRED

Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.2.2-24922-update 4 - Loader version and model: JUN'S LOADER v1.04b - DS918+ - Using custom extra.lzma: NO - Installation type: BAREMETAL - Intel Pentium G4560 / GiBy GA-B250-HD3P B250 / 8GB / LSI SAS 9211-8i (IT) / Intel Pro-1000/PT PCI-e Dual Port  - Additional comments: REBOOT REQUIRED

Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.2.2-24922-update 3 - Loader version and model: JUN'S LOADER v1.04b - DS918+ - Using custom extra.lzma: NO - Installation type: BAREMETAL - Intel Pentium G4560 / GiBy GA-B250-HD3P B250 / 8GB / LSI SAS 9211-8i (IT) / Intel Pro-1000/PT PCI-e Dual Port  - Additional comments: REBOOT REQUIRED

Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.2.2-24922-2 - Loader version and model: JUN'S LOADER v1.04b - DS918+ - Using custom extra.lzma: NO - Installation type: BAREMETAL - Intel Pentium G4560 / GiBy GA-B250-HD3P B250 / 8GB / LSI SAS 9211-8i (IT) / Intel Pro-1000/PT PCI-e Dual Port  - Additional comments: REBOOT REQUIRED

Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.2.2-24922-1 - Loader version and model: JUN'S LOADER v1.04b - DS918+ - Using custom extra.lzma: NO - Installation type: BAREMETAL - Intel Pentium G4560 / GiBy GA-B250-HD3P B250 / 8GB / LSI SAS 9211-8i (IT) / Intel Pro-1000/PT PCI-e Dual Port  - Additional comments: REBOOT REQUIRED

- Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.2.2-24922 - Loader version and model: JUN'S LOADER v1.04b - DS918+ - Using custom extra.lzma: NO - Installation type: BAREMETAL - Intel Pentium G4560 / GiBy GA-B250-HD3P B250 / 8GB / LSI SAS 9211-8i (IT) / Intel Pro-1000/PT PCI-e Dual Port  - Additional comments: REBOOT REQUIRED