Orphée Posted December 22, 2023 Share #2576 Posted December 22, 2023 (edited) On 12/21/2023 at 1:15 AM, Peter Suh said: This is RR’s current status as received from a community user. RR seems to be continuously being updated under the name BLACK SYNOLOGY NAS SYSTEM. Glad to hear it. I personnally switched to M-shell for SA6400. I will probably do the same for DVA3221 sooner or later. Edited December 22, 2023 by Orphée 2 Quote Link to comment Share on other sites More sharing options...
iancilos Posted December 23, 2023 Share #2577 Posted December 23, 2023 (edited) 17 hours ago, T-REX-XP said: Good news. Thanks for the update. Does any one tested emmc as a system installation disk? I would like to install DSM to zimaboard? Thanks 4. Add EMMC as the system installation disk (synoinfo). As soon as I read this point I immediately wanted to try it. I have a mini PC with 64GB EMMC and I would like to use it like this. I built the loader using ds918+ from USB and the new option in synoinfo: support_emmc_boot=yes - Only use EMMC as the system disk(applicable without Sata) When the loader starts, no disk is detected when installing DSM. I would love to have more explanation from @wjz304 about this point to make it work, that would be great! If wjz304 needed a tester for this hardware I have 2 different mini pcs with emmc. AcePC T11 Asus PN40 Edited December 23, 2023 by iancilos add Quote Link to comment Share on other sites More sharing options...
T-REX-XP Posted December 24, 2023 Share #2578 Posted December 24, 2023 On 12/23/2023 at 12:08 PM, iancilos said: 4. Add EMMC as the system installation disk (synoinfo). As soon as I read this point I immediately wanted to try it. I have a mini PC with 64GB EMMC and would like to use it like this. I built the loader using ds918+ from USB and the new option in synoinfo: support_emmc_boot=yes - Only use EMMC as the system disk(applicable without Sata) When the loader starts, no disk is detected when installing DSM. I would love to have more explanation from @wjz304 about this point to make it work; that would be great! If wjz304 needed a tester for this hardware, I have two mini PCs with emmc. AcePC T11 Asus PN40 Thanks for your feedback. I also managed to test the installation on the Zimaboard, but I had no luck. Only one drive, that is, external sata ssd, is available to install. But generally the DSM 7.2 is pretty unstable on that HW—quite a slow boot. After a few attempts to install and boot the DSM, I didn't get any successful results. At the same time, under the proxmox, on that sbc, DSM is working fine. Quote Link to comment Share on other sites More sharing options...
Gomb89 Posted December 24, 2023 Share #2579 Posted December 24, 2023 Hi guys! I've been trying to install DSM on a mini PC for days. Ryzen7 5800U with integrated Radeon graphics, 32gb ddr4, 2 Nic - 1x Realtek R8168 1Gb and Intel I226-v 2.5Gb. I've tried many models of Arc, newest RR and TCRP and they all end up getting an IP after booting and then freezes and I don't get an installation screen. The exception is the SA6400, which starts the installation and starts a loop after the 10-minute countdown. If I reset it, it either starts the installation from the beginning or receives an error message in the place of the installation button. Has anyone encountered something similar? Any tips on what I should try to change? Thanks. Quote Link to comment Share on other sites More sharing options...
MichelD Posted December 25, 2023 Share #2580 Posted December 25, 2023 17 hours ago, Gomb89 said: Hi guys! I've been trying to install DSM on a mini PC for days. Ryzen7 5800U with integrated Radeon graphics, 32gb ddr4, 2 Nic - 1x Realtek R8168 1Gb and Intel I226-v 2.5Gb. I've tried many models of Arc, newest RR and TCRP and they all end up getting an IP after booting and then freezes and I don't get an installation screen. The exception is the SA6400, which starts the installation and starts a loop after the 10-minute countdown. If I reset it, it either starts the installation from the beginning or receives an error message in the place of the installation button. Has anyone encountered something similar? Any tips on what I should try to change? Thanks. I've had similar issues with an AMD CPU. I gave up and switched to Intel CPUs only. No more issues since then. Quote Link to comment Share on other sites More sharing options...
AbuMoosa Posted December 25, 2023 Share #2581 Posted December 25, 2023 Hi All, Since ARPL is no more in development, I believe the closest one I can shift to ARC https://github.com/AuxXxilium/arc ? Since this I believe is ARPL fork so I believe I should be able to switch to this without losing my data? Thanks Quote Link to comment Share on other sites More sharing options...
apriliars3 Posted December 25, 2023 Share #2582 Posted December 25, 2023 Hi guys! I've been trying to install DSM on a mini PC for days. Ryzen7 5800U with integrated Radeon graphics, 32gb ddr4, 2 Nic - 1x Realtek R8168 1Gb and Intel I226-v 2.5Gb. I've tried many models of Arc, newest RR and TCRP and they all end up getting an IP after booting and then freezes and I don't get an installation screen. The exception is the SA6400, which starts the installation and starts a loop after the 10-minute countdown. If I reset it, it either starts the installation from the beginning or receives an error message in the place of the installation button. Has anyone encountered something similar? Any tips on what I should try to change? Thanks.Test it with DS2422+. Quote Link to comment Share on other sites More sharing options...
dj_nsk Posted December 25, 2023 Share #2583 Posted December 25, 2023 3 часа назад, AbuMoosa сказал: Hi All, Since ARPL is no more in development, I believe the closest one I can shift to ARC https://github.com/AuxXxilium/arc ? Since this I believe is ARPL fork so I believe I should be able to switch to this without losing my data? I will say more, you can use any new bootloader without data loss 2 Quote Link to comment Share on other sites More sharing options...
AbuMoosa Posted December 25, 2023 Share #2584 Posted December 25, 2023 ok thanks that's encouraging I'll with ARC then Quote Link to comment Share on other sites More sharing options...
mojojojotroi Posted December 25, 2023 Share #2585 Posted December 25, 2023 Le 24/12/2023 à 17:24, Gomb89 a dit : Hi guys! I've been trying to install DSM on a mini PC for days. Ryzen7 5800U with integrated Radeon graphics, 32gb ddr4, 2 Nic - 1x Realtek R8168 1Gb and Intel I226-v 2.5Gb. I've tried many models of Arc, newest RR and TCRP and they all end up getting an IP after booting and then freezes and I don't get an installation screen. The exception is the SA6400, which starts the installation and starts a loop after the 10-minute countdown. If I reset it, it either starts the installation from the beginning or receives an error message in the place of the installation button. Has anyone encountered something similar? Any tips on what I should try to change? Thanks. I had no experience with AMD based systems, but I know there are more issues, so at least choose only the Synology models based on AMD CPU, you will have better luck 😉 Quote Link to comment Share on other sites More sharing options...
v16v Posted December 25, 2023 Share #2586 Posted December 25, 2023 How do i update with rr-23.12.3-update.zip Quote Link to comment Share on other sites More sharing options...
abced Posted December 28, 2023 Share #2587 Posted December 28, 2023 Does anyone have saved device tree guide that wjz304 wrote in his repo? It was in the Issues section. Quote Link to comment Share on other sites More sharing options...
AllGamer Posted December 29, 2023 Share #2588 Posted December 29, 2023 Does anyone know if ARC and/or ARPL supports LSI 9200 series controllers ? The last time I tried it wouldn't detect the drives properly with my ATTO ExpressSAS H60F I'm shopping for new 16 port cards to replace my old one. Seems like most people are now using LSI 9300 and 9400 series, but both of them are quite pricey. Quote Link to comment Share on other sites More sharing options...
znation Posted December 31, 2023 Share #2589 Posted December 31, 2023 (edited) Le 25/12/2023 à 21:45, v16v a dit : How do i update with rr-23.12.3-update.zip Hello, i'll be also interrested. As we can't do update through arpl menu which now fails of course. What is the way to update when you have the zip in your hand ? (i've read there is a convertion step from arpl to rr, i'm a little lost) Thanks Edited December 31, 2023 by znation Quote Link to comment Share on other sites More sharing options...
wahabe Posted December 31, 2023 Share #2590 Posted December 31, 2023 8 minutes ago, znation said: Hello, i'll be also interrested. As we can't do update through arpl menu which now fails of course. What is the way to update when you have the zip in your hand ? (i've read there is a convertion step from arpl to rr, i'm a little lost) Thanks Quote Link to comment Share on other sites More sharing options...
wahabe Posted December 31, 2023 Share #2591 Posted December 31, 2023 https://svrforum.com/nas/1109503 Quote Link to comment Share on other sites More sharing options...
znation Posted December 31, 2023 Share #2592 Posted December 31, 2023 il y a 11 minutes, wahabe a dit : Problem is video is showing with an up to date version which i don't have ... for example i'm running 23.6.5 and menu "u" (web/ssh) does not exist Quote Link to comment Share on other sites More sharing options...
v16v Posted December 31, 2023 Share #2593 Posted December 31, 2023 https://drive.google.com/uc?export=download&id=1sbxyeuAfaR-al9wl7VsHbraBgKEsJc5B https://drive.google.com/uc?export=download&id=1TAYNSJhFEujph90_4SZIWEvXQ-eecPpM https://drive.google.com/uc?export=download&id=12SSndQKBgItsl6kpT5Gl9d3xysIxVbpq 1 1 Quote Link to comment Share on other sites More sharing options...
Fox Mulder Posted January 1 Share #2594 Posted January 1 5 hours ago, v16v said: https://drive.google.com/uc?export=download&id=1sbxyeuAfaR-al9wl7VsHbraBgKEsJc5B https://drive.google.com/uc?export=download&id=1TAYNSJhFEujph90_4SZIWEvXQ-eecPpM https://drive.google.com/uc?export=download&id=12SSndQKBgItsl6kpT5Gl9d3xysIxVbpq Thanks! can you also provide google drive links for the latest files?: updateall-23.12.10.zip rr-23.12.10.img.zip Thanks! Quote Link to comment Share on other sites More sharing options...
DaoVanTrong Posted January 1 Share #2595 Posted January 1 1 hour ago, CITmAn said: Thanks so much for doing this! I did try to download from the 123pan site but I am unable to register there. Does anyone know how we can register? Even the payment link didn't work for me in the USA. To register for a 123pan account, you need to rent a mainland Chinese phone number to receive the otp code. Can you please remove this direct link to github? The author will stop updating if it is shared on this forum. Thank you very much. Quote Link to comment Share on other sites More sharing options...
CITmAn Posted January 1 Share #2596 Posted January 1 39 minutes ago, DaoVanTrong said: To register for a 123pan account, you need to rent a mainland Chinese phone number to receive the otp code. Can you please remove this direct link to github? The author will stop updating if it is shared on this forum. Thank you very much. Thanks for this info - do you have a recommendation for a provider to rent mainland Chinese number? I'm kinda new to this. Appreciate the help. Quote Link to comment Share on other sites More sharing options...
DaoVanTrong Posted January 2 Share #2597 Posted January 2 12 hours ago, CITmAn said: recommendation for a provider to rent mainland Chinese number? I use: “86 Easy” Quote Link to comment Share on other sites More sharing options...
Rick4 Posted January 9 Share #2598 Posted January 9 On 12/24/2023 at 5:24 PM, Gomb89 said: Hi guys! I've been trying to install DSM on a mini PC for days. Ryzen7 5800U with integrated Radeon graphics, 32gb ddr4, 2 Nic - 1x Realtek R8168 1Gb and Intel I226-v 2.5Gb. I've tried many models of Arc, newest RR and TCRP and they all end up getting an IP after booting and then freezes and I don't get an installation screen. The exception is the SA6400, which starts the installation and starts a loop after the 10-minute countdown. If I reset it, it either starts the installation from the beginning or receives an error message in the place of the installation button. Has anyone encountered something similar? Any tips on what I should try to change? Thanks. Simply set bios to uart OFF, and then it will works like a charm.. Watch this: AMD CBS -> FCH common Option -> Uart Configuration Options disable uart Good luck. Quote Link to comment Share on other sites More sharing options...
Rick4 Posted January 9 Share #2599 Posted January 9 On 12/29/2023 at 9:38 PM, AllGamer said: Does anyone know if ARC and/or ARPL supports LSI 9200 series controllers ? The last time I tried it wouldn't detect the drives properly with my ATTO ExpressSAS H60F I'm shopping for new 16 port cards to replace my old one. Seems like most people are now using LSI 9300 and 9400 series, but both of them are quite pricey. Ask about arc author. Quote Link to comment Share on other sites More sharing options...
Gomb89 Posted January 10 Share #2600 Posted January 10 4 hours ago, Rick4 said: Simply set bios to uart OFF, and then it will works like a charm.. Watch this: AMD CBS -> FCH common Option -> Uart Configuration Options disable uart Good luck. Dude, you are awesome!! I turned it off and the 1823xs+ booted for the first time! Thank you! 😜😝🤪 I think it doesn't matter what model I install on a 2-disc mini-machine, but there might be an aspect I don't know about, so I'll ask. VMs and Docker will run on it. Basically, it doesn't matter what model it is? I think does not affect performance. At least, I didn't notice any difference between my Intel computers, whichever model I used. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.