silvermir Posted January 31, 2023 Share #1801 Posted January 31, 2023 (edited) sorry, pls del Edited January 31, 2023 by silvermir Quote Link to comment Share on other sites More sharing options...
silvermir Posted January 31, 2023 Share #1802 Posted January 31, 2023 3 hours ago, The Chief said: DS918+ Thank you for your reply, but the DS918+ is not available with the newest ARPL. I can only choose 920+ Quote Link to comment Share on other sites More sharing options...
rojoone2 Posted January 31, 2023 Share #1803 Posted January 31, 2023 (edited) 23 minutes ago, silvermir said: Thank you for your reply, but the DS918+ is not available with the newest ARPL. I can only choose 920+ Please give the DS920+ a try on your hardware. Edited January 31, 2023 by rojoone2 Quote Link to comment Share on other sites More sharing options...
The Chief Posted January 31, 2023 Share #1804 Posted January 31, 2023 1 час назад, silvermir сказал: but the DS918+ is not available with the newest ARPL. I can only choose 920+ Select 'disable flag restriction' and DS918+ model will be available. Quote Link to comment Share on other sites More sharing options...
Peter Suh Posted January 31, 2023 Share #1805 Posted January 31, 2023 10 hours ago, Peter Suh said: Question to @fbelavenuto or users who use intel 10G nic (ixgbe). M-SHELL for TCRP also uses fabio's ARPL module. I recently applied the v1.61 module. https://github.com/fbelavenuto/arpl-modules/releases https://github.com/PeterSuh-Q3/rp-ext/tree/main/all-modules/releases There was a conflict between vanilla ixgbe and Redpill's ixgbe in the DS3622xs+ Broadwellnk platform, so I asked fabio to remove it from the ARPL module a while ago. However, in the latest module now, ixgbe.ko has been added again. Is the now recompiled ixgbe.ko stabilized without conflicting with vanilla ixgbe or any issues? ixgbe.ko @fbelavenuto This attached file is for DS3622xs+ A vanilla ixgbe.ko file extracted directly from /lib/modules . Up to v1.50 in broadwellnk-4.4.180.tgz file Although the original vanilla ixgbe.ko is confirmed https://github.com/fbelavenuto/arpl-modules/releases/tag/v1.50 This has been changed since v1.51. There are reports that this changed ixgbe.ko does not work with intel x550-t1, so we are still testing it. Did you have any feedback about the normal operation of ixgbe.ko that you changed? Quote Link to comment Share on other sites More sharing options...
fbelavenuto Posted January 31, 2023 Author Share #1806 Posted January 31, 2023 5 hours ago, Peter Suh said: Did you have any feedback about the normal operation of ixgbe.ko that you changed? No!! My mistake. Thanks for report. Quote Link to comment Share on other sites More sharing options...
fbelavenuto Posted January 31, 2023 Author Share #1807 Posted January 31, 2023 10 minutes ago, fbelavenuto said: No!! My mistake. Thanks for report. Well, I've checked, the ixgbe.ko from broadwellnk is the vanilla module (extracted from DSM HD image)! Now I'm confuse!! Quote Link to comment Share on other sites More sharing options...
silvermir Posted January 31, 2023 Share #1808 Posted January 31, 2023 9 hours ago, The Chief said: Select 'disable flag restriction' and DS918+ model will be available. Thanks it worked Quote Link to comment Share on other sites More sharing options...
Peter Suh Posted February 1, 2023 Share #1809 Posted February 1, 2023 (edited) @fbelavenuto I left an inquiry in your Github issue with the title below. https://github.com/fbelavenuto/arpl-modules/issues/172 "It seems that megaraid_sas.ko of megaraid 9271-8i has been removed" For users of HP N54L and DS3622xs+ Megaraid 9271-8i controller megaraid_sas.ko driver As a result of modifying and applying M SHELL, I received feedback that the operation worked well. I tested with v.1.50 where the megaraid_sas.ko driver was still there. I don't know if there is a relationship in ARPL, but CLASS corresponds to 0104, not 0107. Can you add it back to the ARPL module? Edited February 1, 2023 by Peter Suh Quote Link to comment Share on other sites More sharing options...
Peter Suh Posted February 1, 2023 Share #1810 Posted February 1, 2023 4 hours ago, fbelavenuto said: Well, I've checked, the ixgbe.ko from broadwellnk is the vanilla module (extracted from DSM HD image)! Now I'm confuse!! Thank you for your confirmation. I also rely on users to test without an Intel 10G NIC, so it seems frustrating and confusing. I'm seriously thinking about whether I should buy an X520 dual or not. Quote Link to comment Share on other sites More sharing options...
nemesis122 Posted February 1, 2023 Share #1811 Posted February 1, 2023 14 hours ago, Peter Suh said: ixgbe.ko 404.41 kB · 1 download @fbelavenuto This attached file is for DS3622xs+ A vanilla ixgbe.ko file extracted directly from /lib/modules . Up to v1.50 in broadwellnk-4.4.180.tgz file Although the original vanilla ixgbe.ko is confirmed https://github.com/fbelavenuto/arpl-modules/releases/tag/v1.50 This has been changed since v1.51. There are reports that this changed ixgbe.ko does not work with intel x550-t1, so we are still testing it. Did you have any feedback about the normal operation of ixgbe.ko that you changed? 8 hours ago, fbelavenuto said: No!! My mistake. Thanks for report. 8 hours ago, fbelavenuto said: Well, I've checked, the ixgbe.ko from broadwellnk is the vanilla module (extracted from DSM HD image)! Now I'm confuse!! Hi I have gen8 Micorserver with Intel 520sfp+ dual 10 Gbe and it is worked with ARPL1.11a PLS do not change anything at this Modul i will test with 1.13 and let you know ! Have a look this is for ARPL 1.11a https://github.com/fbelavenuto/arpl-modules/issues/94#issuecomment-1383136285 https://github.com/fbelavenuto/arpl-modules/issues/94#issuecomment-1383927398 https://github.com/fbelavenuto/arpl-modules/issues/94#issuecomment-1386554603 Quote Link to comment Share on other sites More sharing options...
nemesis122 Posted February 1, 2023 Share #1812 Posted February 1, 2023 (edited) @Peter Suh @fbelavenuto Testedt ARPL 1.13a actual Loader today updated all Addons and Modules before creating the Loader System: Gen8 Microserver I3 16GB RAM 4x3tb Raid 0 and 1x SSD Samsung SSD 1x Intel 520SFP+ Dual 10 gbe / 1 port connected SFP+ DSM Version 3622xs 42962 u3 Selected Modules: ALL Addons: CPU Info Codec Patch Update from other installed DSM Version --> Working perfect Reset all Data and doing a fresh install --> working perfect So do NOT change anything at this ixgbe Modul thank you for develop this Masterpiece of a Loader This Loader needs a Hall of Fame for Fabio both have a nice day see ya Edited February 1, 2023 by nemesis122 3 1 Quote Link to comment Share on other sites More sharing options...
ACiDxCHRiST Posted February 1, 2023 Share #1813 Posted February 1, 2023 @fbelavenuto I have a system that last worked on 1.0 beta 5. With every version of ARPL since then, the computer freezes while booting DSM kernel and is not reachable. I have been doing various steps to try and isolate the issue. If I clean image beta 5 to my USB drive then update the menu to beta 13 and build the loader, everything works. But if I then update the Addons and build the loader, DSM never boots. I tried disabling the ACPID and MISC addons alternately, but that didn't help. Is there something that you changed between beta 5 and beta 6 that would be touched by triggering an addons update? Please let me know any diagnostics that would help you dial down what is causing the problem. Prod LKM Direct Boot Ryzen 3600 ASUS ROG STRIX X370-F GAMING Quote Link to comment Share on other sites More sharing options...
marcinx98x Posted February 2, 2023 Share #1814 Posted February 2, 2023 Hi, After replacing the processor, it does not map 2 ports from the controller to me. Only three drives connected to the motherboard are visible in DSM 7.1 Can anyone know how to fix this? Quote Link to comment Share on other sites More sharing options...
Orphée Posted February 2, 2023 Share #1815 Posted February 2, 2023 Hello ! I upgraded my hardware to i9-9900k (9th gen) My i915 passed through iGPU is not loaded... 0000:01:00.0 Display controller: Intel Corporation CoffeeLake-S GT2 [UHD Graphics 630] Subsystem: Super Micro Computer Inc Device 1a1d Flags: fast devsel, IRQ 10 Memory at fc000000 (64-bit, non-prefetchable) [size=16M] Memory at e0000000 (64-bit, prefetchable) [size=256M] I/O ports at 5000 [size=64] Capabilities: [40] Vendor Specific Information: Len=0c <?> Capabilities: [70] Express Endpoint, MSI 00 Capabilities: [ac] MSI: Enable- Count=1/1 Maskable- 64bit- Capabilities: [d0] Power Management version 2 Capabilities: [100] Null Capabilities: [200] Address Translation Service (ATS) Capabilities: [300] Page Request Interface (PRI) Tried with DVA1622 and DS1520+ loaders... My old 4th gen was loaded as i915 Did I miss something ? Thanks Quote Link to comment Share on other sites More sharing options...
Orphée Posted February 3, 2023 Share #1816 Posted February 3, 2023 Let me guess : Found on Google : Quote +pci:v00008086d00003E98* + ID_MODEL_FROM_DATABASE=UHD Graphics 630 (Desktop 9 Series) But Inside drivers/gpu/drm/i915/i915.mod.c There is no reference to MODULE_ALIAS("pci:v00008086d00003E98sv*sd*bc03sc*i*"); There is only : MODULE_ALIAS("pci:v00008086d00003E90sv*sd*bc03sc*i*"); MODULE_ALIAS("pci:v00008086d00003E93sv*sd*bc03sc*i*"); MODULE_ALIAS("pci:v00008086d00003E99sv*sd*bc03sc*i*"); MODULE_ALIAS("pci:v00008086d00003E91sv*sd*bc03sc*i*"); MODULE_ALIAS("pci:v00008086d00003E92sv*sd*bc03sc*i*"); MODULE_ALIAS("pci:v00008086d00003E96sv*sd*bc03sc*i*"); MODULE_ALIAS("pci:v00008086d00003E9Asv*sd*bc03sc*i*"); MODULE_ALIAS("pci:v00008086d00003E9Bsv*sd*bc03sc*i*"); MODULE_ALIAS("pci:v00008086d00003E94sv*sd*bc03sc*i*"); matching 8086:3E9x So Desktop 9 series is not handled by default i915 driver... am I wrong ? Quote Link to comment Share on other sites More sharing options...
silvermir Posted February 3, 2023 Share #1817 Posted February 3, 2023 (edited) I've used V1.0beta13 an have problems with HDD hibernate. Every 20 mins the HDDs go to hibernate but they instantly woke up every 20 min. I can hear how they go to hibernate and instantly wake up. Is there a workaround for this? I have a Gigabyte-j3455n-DH3 board and use DS918+ Edited February 3, 2023 by silvermir Quote Link to comment Share on other sites More sharing options...
Orphée Posted February 3, 2023 Share #1818 Posted February 3, 2023 (edited) 21 hours ago, Orphée said: Let me guess : Found on Google : But Inside drivers/gpu/drm/i915/i915.mod.c There is no reference to MODULE_ALIAS("pci:v00008086d00003E98sv*sd*bc03sc*i*"); There is only : MODULE_ALIAS("pci:v00008086d00003E90sv*sd*bc03sc*i*"); MODULE_ALIAS("pci:v00008086d00003E93sv*sd*bc03sc*i*"); MODULE_ALIAS("pci:v00008086d00003E99sv*sd*bc03sc*i*"); MODULE_ALIAS("pci:v00008086d00003E91sv*sd*bc03sc*i*"); MODULE_ALIAS("pci:v00008086d00003E92sv*sd*bc03sc*i*"); MODULE_ALIAS("pci:v00008086d00003E96sv*sd*bc03sc*i*"); MODULE_ALIAS("pci:v00008086d00003E9Asv*sd*bc03sc*i*"); MODULE_ALIAS("pci:v00008086d00003E9Bsv*sd*bc03sc*i*"); MODULE_ALIAS("pci:v00008086d00003E94sv*sd*bc03sc*i*"); matching 8086:3E9x So Desktop 9 series is not handled by default i915 driver... am I wrong ? Ok so it seems only epyc7002 has the following line in i915_pciids.h : INTEL_VGA_DEVICE(0x3E98, info), /* SRV GT2 */ \ Edit : Ok I just had to add the missing line before building the i915.ko driver and it worked, I was able to unload/reload i915 module : 0000:01:00.0 Display controller: Intel Corporation CoffeeLake-S GT2 [UHD Graphics 630] Subsystem: Super Micro Computer Inc Device 1a1d Flags: bus master, fast devsel, latency 0, IRQ 33 Memory at fc000000 (64-bit, non-prefetchable) [size=16M] Memory at e0000000 (64-bit, prefetchable) [size=256M] I/O ports at 5000 [size=64] Capabilities: [40] Vendor Specific Information: Len=0c <?> Capabilities: [70] Express Endpoint, MSI 00 Capabilities: [ac] MSI: Enable+ Count=1/1 Maskable- 64bit- Capabilities: [d0] Power Management version 2 Capabilities: [100] Null Capabilities: [200] Address Translation Service (ATS) Capabilities: [300] Page Request Interface (PRI) Kernel driver in use: i915 Emby trancode log : >>>>>> User policy for orphee Enable Playback Remuxing: True Enable Video Playback Transcoding: True Enable Audio Playback Transcoding: True >>>>>> Hardware Decoders for hevc [X] VAAPI CoffeeLake-S GT2 UHD Graphics 630 [1] - H.265 (HEVC) [X] QuickSync CoffeeLake-S GT2 UHD Graphics 630 [1] - H.265 (HEVC) >>>>>> Hardware Encoders for h264 [X] VAAPI CoffeeLake-S GT2 UHD Graphics 630 [1] - H.264 (AVC) [X] QuickSync CoffeeLake-S GT2 UHD Graphics 630 [1] - H.264 (AVC) >>>>>> Selected Codecs Decoder VAAPI CoffeeLake-S GT2 UHD Graphics 630 [1] - H.265 (HEVC) Adapter #1: 'CoffeeLake-S GT2 UHD Graphics 630 [1]' Id:16024 (Driver: Intel iHD driver for Intel(R) Gen Graphics - 21.2.2 (27b773b2), Vendor: Intel Corporation) Max Bitrate: 117 Mbit/s - Frame Sizes: max 8192x8192 Color Formats: NV12, P010 - Bit Depths: 8, 10 Profiles: Main Profile (Level 6.1), Main 10 Profile (Level 6.1) Encoder VAAPI CoffeeLake-S GT2 UHD Graphics 630 [1] - H.264 (AVC) Adapter #1: 'CoffeeLake-S GT2 UHD Graphics 630 [1]' Id:16024 (Driver: Intel iHD driver for Intel(R) Gen Graphics - 21.2.2 (27b773b2), Vendor: Intel Corporation) Max Bitrate: 234 Mbit/s - Frame Sizes: 32x32...4096x4096 Color Formats: NV12 - Bit Depths: 8 Profiles: Main Profile (Level 6), High Profile (Level 6), Constrained Baseline Profile (Level 6) >>>>>> FindVideoEncoder - MediaType: h264, UseHardwareCodecs: True, HWA-Mode: Automatic Info Checking: 'VAAPI CoffeeLake-S GT2 UHD Graphics 630 [1] - H.264 (AVC)' Info Check successful - selecting 'VAAPI CoffeeLake-S GT2 UHD Graphics 630 [1] - H.264 (AVC)' >>>>>> FindVideoDecoder - MediaType: hevc, UseHardwareCodecs: True, HWA-Mode: Automatic Info Checking: 'VAAPI CoffeeLake-S GT2 UHD Graphics 630 [1] - H.265 (HEVC)' Info Check successful - selecting 'VAAPI CoffeeLake-S GT2 UHD Graphics 630 [1] - H.265 (HEVC)' Info Tone Mapping would be desired, but hardware tone mapping is disabled >>>>>> Processing Plan Name CanDoInHW WillDoInHW Reason VAAPI CoffeeLake-S GT2 UHD Graphics 6... >> True True Hardware Codec VideoInput >> True True Same adapter (/dev/dri/renderD128), same hardware co... ToneMapping (when possible) >> True True VideoOutput >> True True Hardware encoder VAAPI CoffeeLake-S GT2 UHD Graphics 6... >> True True Hardware Codec >>>>>> Video Processing Steps for [0:0]: H.265 (HEVC) Step HW-Context Format SW-Format Size Next HEVC >> VAAPI vaapi_vld yuv420p10 3836x2074 >> scale_vaapi scale_vaapi >> VAAPI vaapi_vld nv12 3836x2074 >> @pocopico @fbelavenuto Could you please take this i915.ko for geminilake and add it in your repo ? i915.ko Edited February 3, 2023 by Orphée 1 Quote Link to comment Share on other sites More sharing options...
AleAmadoC Posted February 3, 2023 Share #1819 Posted February 3, 2023 Hello, When I try to Install Any Model With DSM 42218 (This because is the last version where advanced media codecs can activate) I get Hash mismatch error, no matter what hardware I use, only let me install beyond that like 42962. Thank you for your help. Quote Link to comment Share on other sites More sharing options...
nemesis122 Posted February 4, 2023 Share #1820 Posted February 4, 2023 TEST ARPL 1.0 beta 13 System HP gen8 Micorserver CPU i3 3240 16GB RAM 4x4tb HDD + 1xSSD 1xNetwork card Intel 520SFP+ Dual ARPL 1.0 beta 13 all modules+Addons updated these Modules are also not working when the modules + addons NOT updated Selected Addons : CPU Info + syno Codec Patch Selected Modules: ALL ( these Models which is not working is also not working when Moddules are not Selected DSM Version 42962 tested 920+ no HDD Detected 1621xs no HDD Detected 2422xs no HDD Detected 3615xs not working crash Soft Lookup [ 197.214775] Modules linked in: bromolow_synobios(PO) usbcore usb_common redpill(OF) 3617xs not working the same problem as 3615xs 3622xs working perfect in any case updated fresh install etc. DVA1622 no HDD Detected RS4021 working perfect in any case updated fresh install etc. pls note with ARPL 1.0 beta 11 these models 3617 3622 4021 was working perfect in any case other i have not tested there was only a cosmetic issue in the Info tab CPU clock speed Log 3615xs ARPL 1.0 beta 13 3615 DSM 42962 with modules and also without Modules not working [ 197.214775] Modules linked in: bromolow_synobios(PO) usbcore usb_common redpill(OF) [ 197.252858] CPU: 0 PID: 3732 Comm: scsi_id Tainted: PF O 3.10.108 #42962 [ 197.290032] Hardware name: HP ProLiant MicroServer Gen8, BIOS J06 04/04/2019 [ 197.324671] task: ffff8803f1d2c040 ti: ffff880407a34000 task.ti: ffff880407a34000 [ 197.362188] RIP: 0010:[<ffffffff814a935a>] [<ffffffff814a935a>] _raw_spin_lock+0x1a/0x30 [ 197.401579] RSP: 0018:ffff880407a37e28 EFLAGS: 00000297 [ 197.427001] RAX: 0000000000000001 RBX: ffffffff811384a0 RCX: 00007ffd44cebe30 [ 197.463436] RDX: 0000000000000002 RSI: 000000000000005d RDI: ffffffffa001f5a0 [ 197.500032] RBP: 000000000000005d R08: ffff8803f1585b00 R09: 0000000000002285 [ 197.536722] R10: fffffffffffff124 R11: 0000000000000202 R12: 0000000000000000 [ 197.573864] R13: ffffffff810fd663 R14: ffff880407a387f0 R15: 0000000000000000 [ 197.611334] FS: 00007f6b23582c00(0000) GS:ffff880409a00000(0000) knlGS:0000000000000000 [ 197.651974] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 197.679890] CR2: 00007f6b229802f0 CR3: 0000000407a38000 CR4: 00000000001607f0 [ 197.714605] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 197.748116] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 197.782039] Stack: [ 197.791468] ffffffffa00023b6 0000000000002285 ffff880407f6a000 00007ffd44cebe30 [ 197.826588] ffff8803f1585b00 ffffffff812690d7 ffffffff814ada08 ffff8803f1585b00 [ 197.861906] 0000000000000000 0000000063ddfab7 00000000ffffffe7 ffff8803f1de8180 [ 197.897461] Call Trace: [ 197.909248] [<ffffffffa00023b6>] ? sd_ioctl_canary+0x16/0x60 [redpill] [ 197.941117] [<ffffffff812690d7>] ? blkdev_ioctl+0x2d7/0x840 [ 197.968076] [<ffffffff814ada08>] ? __do_page_fault+0x1f8/0x500 [ 197.996495] [<ffffffff81161dd4>] ? block_ioctl+0x34/0x40 [ 198.022281] [<ffffffff8113c28d>] ? do_vfs_ioctl+0x76d/0x9b0 [ 198.048942] [<ffffffff8113c570>] ? SyS_ioctl+0xa0/0xb0 [ 198.073779] [<ffffffff814b1e7e>] ? system_call_fastpath+0x1c/0x21 [ 198.103371] Code: 75 f7 c3 0f 1f 40 00 66 2e 0f 1f 84 00 00 00 00 00 b8 00 01 00 00 f0 66 0f c1 07 0f b6 d4 38 c2 74 10 0f 1f 80 00 00 00 00 f3 90 <0f> b6 07 38 d0 75 f7 c3 0f 1f 40 00 66 2e 0f 1f 84 00 00 00 00 Quote Link to comment Share on other sites More sharing options...
Marello320 Posted February 5, 2023 Share #1821 Posted February 5, 2023 Hello everyone, such an interesting question, I'm putting the latest version of rpl v1.0-beta 13, I tried to do everything for a test with 1 disk, in the end everything was put, everything is OK. But as soon as I connect everything else, 5 disks and 1 ssd, then when building the build and rebooting, I see how the ping goes 1 time, and then silence, I waited for more than 10 minutes, but even the nas did not appear on the network. Who can tell you what the problem is? Quote Link to comment Share on other sites More sharing options...
Marello320 Posted February 5, 2023 Share #1822 Posted February 5, 2023 2 часа назад, Marello320 сказал: Всем привет, такой интересный вопрос, ставлю последнюю версию rpl v1.0-beta 13, на пробу пробовал делать все с 1 диском, в итоге все поставилось, все ок. Но как только подключаю все остальное, 5 дисков и 1 ssd, то при сборке билда и перезагрузке вижу как пинг идет 1 раз, а потом тишина, ждал больше 10 минут, но даже nas не появляются в сети. Кто может сказать вам, в чем проблема? As a result, during the experiments, it was possible to identify the moment. I installed the DVA1622 assembly and everything started up with it without any problems. Quote Link to comment Share on other sites More sharing options...
undecided Posted February 5, 2023 Share #1823 Posted February 5, 2023 I have the following hardware: Gigabyte Z97N-WIFI with Intel i7-4790T (Onboard Intel & Realtek LAN ports) 16GB RAM LSI 9300-16i SAS Controller I booted this up with old 6.1.2 Jun Loader that I've been using on a different system and I am familiar with and everything was discovered and operated fine. Is this loader capable of running on the above hardware and if yes, which version of DSM should I put on it? Thanks Quote Link to comment Share on other sites More sharing options...
tigs Posted February 6, 2023 Share #1824 Posted February 6, 2023 (edited) Hello Guys and hopefully @fbelavenuto I have been playing with both this automated or the other non-automated to setup DVA3221 on lenovo P300 thinkstation with xeon E3-1245 v3 CPU and Intel I217LM onboard NIC. arpl-1.0-beta13 AND tinycore-redpill.v0.9.4.0 The process is fairly simple and straightforward. Everything went well until the last step when I "Boot the Loader". It booted up to USB with verbose. It is very short lived, for less than a minute. It would shut down automatically. There were occasions i was quick enough to connect from within the Synology assistant. the web page was loading and stuck at http://xxx.xxx.xx.xx:5000/timestamps ?, then computer would shut down. I have been playing with for the past 3 days with no progress. auto serial N auto Mac PID and VID are correct Thanks Edited February 6, 2023 by tigs Quote Link to comment Share on other sites More sharing options...
oswaldini Posted February 7, 2023 Share #1825 Posted February 7, 2023 Hi, I want to buy H370M-ITX/ac. This motherboard has two network cards: Intel I219V and I211AT - will both NICs work? The information I found are not unequivocal. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.