chucuoigia Posted October 23, 2022 Share #1076 Posted October 23, 2022 (edited) Hi, this my first post In use ARPL to create with hardware: Mainboard Asus Z77, intel 2600 cpu, HP240 HBA card, 8x3T HDD All successful, but have small problem: My 8HDD not have valid serial number (image attach). It is very difficult to replace the HDD when damaged Pls help ! Edited October 23, 2022 by chucuoigia Quote Link to comment Share on other sites More sharing options...
Green Posted October 24, 2022 Share #1077 Posted October 24, 2022 Remove one, then check which one is missing. Then draw a little diagram as you number the drives, One by one Quote Link to comment Share on other sites More sharing options...
chucuoigia Posted October 24, 2022 Share #1078 Posted October 24, 2022 Oh, i have 8 hdd, do your way i have to turn on and off nas 8 times. Quote Link to comment Share on other sites More sharing options...
BartAcid Posted October 24, 2022 Share #1079 Posted October 24, 2022 It look like all HDD are connected to HBA card, so disk 7 i first one on HBA. Disk 14 is eigth on controler. If you know that it is simple to find out. 1 Quote Link to comment Share on other sites More sharing options...
fbelavenuto Posted October 24, 2022 Author Share #1080 Posted October 24, 2022 On 10/19/2022 at 4:53 PM, WowaDriver said: @fbelavenuto hi and thanks for the arpl loader. Is it possible to use this with an DVA1622 build? I tried but it show me only the virtual discs on sata 1 controller on unraid. The passthrough lsi hba wasn't shown up... Hi, Device-tree models only works with native SATA! 1 Quote Link to comment Share on other sites More sharing options...
fbelavenuto Posted October 24, 2022 Author Share #1081 Posted October 24, 2022 18 hours ago, chucuoigia said: Hi, this my first post In use ARPL to create with hardware: Mainboard Asus Z77, intel 2600 cpu, HP240 HBA card, 8x3T HDD All successful, but have small problem: My 8HDD not have valid serial number (image attach). It is very difficult to replace the HDD when damaged Pls help ! For HBA cards only DS3615XS, DS3617XS and DS3622XS works 3 Quote Link to comment Share on other sites More sharing options...
Peter Suh Posted October 24, 2022 Share #1082 Posted October 24, 2022 (edited) On 10/15/2022 at 3:25 AM, vista1967 said: Since yesterday, with @pocopico , we have been testing the new extension driver for the apollolake / geminilake / v1000 platforms where it was not possible to turn on power schedule. The new driver is called rtc-cmos . https://github.com/pocopico/rp-ext/tree/main/rtc-cmos This driver solves the problem that /dev/rtc0 is not created on the above 3 platforms. After adding the driver in TCRP and building the loader, you can check that the power is turned on by reservation in 3 minutes with the script below. The power must of course be turned off beforehand. sudo sh -c "echo 0 > /sys/class/rtc/rtc0/wakealarm" sudo sh -c "echo `date '+%s' -d '+ 3 minutes'` > /sys/class/rtc/rtc0/wakealarm" @pocopico is currently completing the automation script so that it can work even on the power schedule in the control panel. When this script is completed, do you think it can be applied to ARPL? @fbelavenuto How do you see it? Is it acceptable to APRL? Edited October 24, 2022 by Peter Suh 1 Quote Link to comment Share on other sites More sharing options...
fbelavenuto Posted October 24, 2022 Author Share #1083 Posted October 24, 2022 6 minutes ago, Peter Suh said: @pocopico is currently completing the automation script so that it can work even on the power schedule in the control panel. When this script is completed, do you think it can be applied to ARPL? Yes, I'll add!! Thanks 3 Quote Link to comment Share on other sites More sharing options...
chucuoigia Posted October 24, 2022 Share #1084 Posted October 24, 2022 (edited) 43 minutes ago, fbelavenuto said: For HBA cards only DS3615XS, DS3617XS and DS3622XS works Hi, i created on DS3622xs version Edited October 24, 2022 by chucuoigia Quote Link to comment Share on other sites More sharing options...
Valiran34 Posted October 24, 2022 Share #1085 Posted October 24, 2022 Le 21/10/2022 à 18:52, Valiran34 a dit : Are you able to make your HDD hibernate? Without nothing running except DSM itself, my HDDs never hibernate. I'ml using a VM under Unraid, passing throught the whole LSI card where the HDD are connected. Using fake SN and Mac on a ds3622xs+. Nobody have something to share about it? Quote Link to comment Share on other sites More sharing options...
Alex1989 Posted October 25, 2022 Share #1086 Posted October 25, 2022 On 10/11/2022 at 3:13 AM, fbelavenuto said: Please upload the two files (arpl.vmdk and arpl-flat.vmdk) and use the "arpl.vmdk" in the ESXi/VMWare. I use this vmdk in unraid ,as the guide Quote Link to comment Share on other sites More sharing options...
Valiran34 Posted October 25, 2022 Share #1087 Posted October 25, 2022 (edited) Well Well... Trying to find why my HDD doesn't hibernate lead me to a bug (?). My config: Ds3622XS+ using a VM under Unraid. The vmdk loader is configured in USB (configuring it as a SATA device doesn't change anything, except that disk3 become green on the loader capture under). My 4 SATA HDD are connected to a 4a:00.0 Serial Attached SCSI controller: Broadcom / LSI SAS2308 PCI-Express Fusion-MPT SAS-2 (rev 05) and the whole card is passed throught to the VM. 6 HDD on this card. My computer is an AMD Threadripper 3690x on an Aorus Master sTRX40 with no Intel SATA controller. And now that's what I see in the loader: And on DSM (pay attention to the fact that DSM doesn't see any expansion bay) : How can I make: - The loader to see the proper card and the proper disks - DSM to see the disk in the right socket (HDD1 in HDD1 socket and not in socket 13) ? Edited October 25, 2022 by Valiran34 Quote Link to comment Share on other sites More sharing options...
Peter Suh Posted October 26, 2022 Share #1088 Posted October 26, 2022 (edited) @fbelavenuto From yesterday, I heard from pocopico that you are working with pocopico to improve functions related to power reservation management. I heard that the power reservation GUI of the control panel is being modified to enable multi-reservation. Does the last updated version of ARPL include this multi-reservation? Edited October 26, 2022 by Peter Suh Quote Link to comment Share on other sites More sharing options...
Peter Suh Posted October 26, 2022 Share #1089 Posted October 26, 2022 4 minutes ago, Peter Suh said: @fbelavenuto From yesterday, I heard from pocopico that you are working with pocopico to improve functions related to power reservation management. I heard that the power reservation GUI of the control panel is being modified to enable multi-reservation. Does the last updated version of ARPL include this multi-reservation? Ah, I misunderstood the PM of pocopico. The permanent solution was provided by you Is pocopico thinking about multi-reservation? Sorry. ^^ Quote Link to comment Share on other sites More sharing options...
gadreel Posted October 26, 2022 Share #1090 Posted October 26, 2022 (edited) Hi @Valiran34, This is how Unraid's QEMU works. The 1st virtual SATA controller is there no matter what you do. I do not know the specific reasons but a virtual SATA controller is present even if you do not have a drive. I am not talking about pass-through drives. The 2nd Virtual Controller I believe that you can remove. Just go into your Unraid VM XML and see if you can remove something that looks like this: <controller type='sata' index='1'> <alias name='ide'/> <address type='pci' domain='0x0000' bus='0x02' slot='0x01' function='0x0'/> </controller> If the above exists if you can remove it the 2nd controller should disappear... The 1st controller which should look like this, as said you cannot remove it but what you can do is go into the ARPL configuration and add those SataPortMap and SataIdxMap like the sample below. <controller type='sata' index='0'> <alias name='ide'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x1f' function='0x2'/> </controller> I saw this before in TinyCore Red Pill. I do not know how to describe it but I think the 1st controller (The one that you cannot remove from Unraid's QEMU XML) has 1 drive or has no drives and starts at 1st position and then your 2nd controller (Your passtrough card) has 6 drives and the 1st drive starts at 1st position. Its complicate, there is a lot of trial and error to make this work. I just gave you a general idea of what is going on... SataPortMap=16 DiskIdxMap=00 Also that wrong numbering will not affect DSM in any way. It's just a cosmetic issue... you can leave it as is if you want. It should not cause any issues. 5 hours ago, Valiran34 said: Well Well... Trying to find why my HDD doesn't hibernate lead me to a bug (?). My config: Ds3622XS+ using a VM under Unraid. The vmdk loader is configured in USB (configuring it as a SATA device doesn't change anything, except that disk3 become green on the loader capture under). My 4 SATA HDD are connected to a 4a:00.0 Serial Attached SCSI controller: Broadcom / LSI SAS2308 PCI-Express Fusion-MPT SAS-2 (rev 05) and the whole card is passed throught to the VM. 6 HDD on this card. My computer is an AMD Threadripper 3690x on an Aorus Master sTRX40 with no Intel SATA controller. And now that's what I see in the loader: And on DSM (pay attention to the fact that DSM doesn't see any expansion bay) : How can I make: - The loader to see the proper card and the proper disks - DSM to see the disk in the right socket (HDD1 in HDD1 socket and not in socket 13) ? Edited October 26, 2022 by gadreel Quote Link to comment Share on other sites More sharing options...
jurgenautt Posted October 26, 2022 Share #1091 Posted October 26, 2022 first of all apologize if my english is not very good, I have mounted the dsm 7.1 on an intel hardware: supermicro x10sdv-tp8f motherboard (intel xeon d-1518, 8cores,6 LAN 1GB, 2 LAN 10GB) 16ram ddr ecc, hba lsi 3008 controller 2u box from the manufacturer chembro sas/sata with 14 disks, 2 power supplies I installed the installation version of (velabenuto) v0.5-alfa1, I followed all the configuration steps and selected the version for RS4021xs+, which is the most similar hardware I have for that version It has really been installed without any let's say serious problem detects disks (but not in correct order), says one power supply fails (both power supplies work fine) I attach screenshots and photos I would like to be able to organize the hard drives correctly the hba controller has all the front drives connected to it, and the rear small drive is connected to the sata controller on the motherboard ,thanks😁 Quote Link to comment Share on other sites More sharing options...
RedwinX Posted October 26, 2022 Share #1092 Posted October 26, 2022 For trying : I've backported the iGC driver to kernel 4.4. Not tested on DSM system yet, but works on a Ubuntu 18 on 4.4.180+ mod_unload without PREEMPT igc.ko Quote Link to comment Share on other sites More sharing options...
NooL Posted October 26, 2022 Share #1093 Posted October 26, 2022 9 hours ago, jurgenautt said: first of all apologize if my english is not very good, I have mounted the dsm 7.1 on an intel hardware: supermicro x10sdv-tp8f motherboard (intel xeon d-1518, 8cores,6 LAN 1GB, 2 LAN 10GB) 16ram ddr ecc, hba lsi 3008 controller 2u box from the manufacturer chembro sas/sata with 14 disks, 2 power supplies I installed the installation version of (velabenuto) v0.5-alfa1, I followed all the configuration steps and selected the version for RS4021xs+, which is the most similar hardware I have for that version It has really been installed without any let's say serious problem detects disks (but not in correct order), says one power supply fails (both power supplies work fine) I attach screenshots and photos I would like to be able to organize the hard drives correctly the hba controller has all the front drives connected to it, and the rear small drive is connected to the sata controller on the motherboard ,thanks😁 Hi Jurgen No need to apologize for language, I think that most of us in here is not native english speakers - so no problem there In regards to your problems. The PSU warnings is a known limitation of the RS4021xs model at the moment, as far as I know there has been no attempts to try and find/modify the warnings that come with it - So for now its just something that you have to live with. In regards to the HBA order - This is a known issue, DSM will put the HBA drives in a random order at boot, I believe that there was efforts made into a work-around to this in the following thread, but I have no idea if it works etc. 1 Quote Link to comment Share on other sites More sharing options...
fbelavenuto Posted October 26, 2022 Author Share #1094 Posted October 26, 2022 Finally the beta version! https://github.com/fbelavenuto/arpl/releases/tag/v1.0-beta2 I've changed the update system, then is necessary to burn the image again, the upload menu do not work from alpha to beta! 1 7 Quote Link to comment Share on other sites More sharing options...
Valiran34 Posted October 26, 2022 Share #1095 Posted October 26, 2022 So we have to replace the 2 vmdk files? Does our actual loader won't be f0cked? Quote Link to comment Share on other sites More sharing options...
fbelavenuto Posted October 26, 2022 Author Share #1096 Posted October 26, 2022 44 minutes ago, Valiran34 said: So we have to replace the 2 vmdk files? Does our actual loader won't be f0cked? Save the user-config.yml from first, replace the vmdks, boot the new loader and re-put the user-config.yml, this way is possible to recreate the loader with same config. DSM will ask for recover, do it. 2 Quote Link to comment Share on other sites More sharing options...
frezeen Posted October 26, 2022 Share #1097 Posted October 26, 2022 (edited) 1 hour ago, fbelavenuto said: Save the user-config.yml from first, replace the vmdks, boot the new loader and re-put the user-config.yml, this way is possible to recreate the loader with same config. DSM will ask for recover, do it. update from alpha to beta, restored the saved user-config.ym in /mnt/p1, rebuild the loader , start recover process in DMS ,update process OK with no problem in proxmox VM i have a proplem only, how can i set disk in the 4 slots of ds918+? i have a virtio scsi single, with 2 qemu scsi disks in proxmox VM but DSM call them disk 13 and 14, i want disk 1 and 2 or something in that 4 slots only Edited October 26, 2022 by frezeen Quote Link to comment Share on other sites More sharing options...
NooL Posted October 26, 2022 Share #1098 Posted October 26, 2022 34 minutes ago, frezeen said: update from alpha to beta, restored the saved user-config.ym in /mnt/p1, rebuild the loader , start recover process in DMS ,update process OK with no problem in proxmox VM i have a proplem only, how can i set disk in the 4 slots of ds918+? i have a virtio scsi single, with 2 qemu scsi disks in proxmox VM but DSM call them disk 13 and 14, i want disk 1 and 2 or something in that 4 slots only What does the option to show attached drives (in the loader) look like? That will help Quote Link to comment Share on other sites More sharing options...
frezeen Posted October 26, 2022 Share #1099 Posted October 26, 2022 19 minutes ago, NooL said: What does the option to show attached drives (in the loader) look like? That will help Quote Link to comment Share on other sites More sharing options...
Green Posted October 26, 2022 Share #1100 Posted October 26, 2022 (edited) 5 hours ago, fbelavenuto said: Finally the beta version! https://github.com/fbelavenuto/arpl/releases/tag/v1.0-beta2 I've changed the update system, then is necessary to burn the image again, the upload menu do not work from alpha to beta! -----------Same Model as before Edited October 26, 2022 by Green 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.