speedyrazor Posted July 23, 2017 Share #3501 Posted July 23, 2017 On 15/07/2017 at 5:16 PM, speedyrazor said: I am currently using VMware EXSi 6.5 on a VM with DS3617xs on DSM 6.1.2-15132, all working fine. When trying to update to DSM 6.1.3-15152 using the autoupdate it immediately fails with "Unknown error occurs (21)" and returns me to the un-updated GUI. I have also tried a manual update, after downloading the file "DSM_DS3617xs_15152.pat", manual update also immediately fails with "Unknown error occurs (21)". How can I update please? Still can't update, what could be the issue with "Unknown error occurs (21)" ? Quote Link to comment Share on other sites More sharing options...
KGert Posted July 24, 2017 Share #3502 Posted July 24, 2017 Does the 1.02b lodaer suit for DSM 6.0.3 , anyone ? Quote Link to comment Share on other sites More sharing options...
holybabel Posted July 24, 2017 Share #3503 Posted July 24, 2017 Hi everyone, i wanted to update my baremetal diskstation from DSM 6.0.2-8451 Update 11 to latest version using 1.02b loader from jun. I followed polanskiman's tutorial and changed the extra.lzma ramdisk with the one polanskiman provided in his tutorial. But now when i boot with the flashdrive it reboots everytime. I hook up a monitor and i can see that it shows the "normal" screen with the "happy hacking...go to find.synology.com...extracting kernel" and so on and then it reboots. Can someone point me to the right direction? Quote Link to comment Share on other sites More sharing options...
pwvandeursen Posted July 24, 2017 Share #3504 Posted July 24, 2017 What system do you have? I had to use the original extra.Izma file. maybe that would work in your case as well iso updating the file? Quote Link to comment Share on other sites More sharing options...
holybabel Posted July 24, 2017 Share #3505 Posted July 24, 2017 (edited) Ok, with original extra.lzma it works. DSM 6.1.3-15152 is being installed right now. EDIT: Had to make a hardreset, but now everything works. DSM 6.1.3-15152 U1 Thanks at all Edited July 24, 2017 by holybabel Quote Link to comment Share on other sites More sharing options...
mar1boro Posted July 24, 2017 Share #3506 Posted July 24, 2017 On 20.09.2016 at 5:57 PM, jun said: Loader download mirrors: here (managed by Polanskiman) including .ISO format. These are plain and simple copies of Jun's loaders, no mods. I tried to use DS3615xs 6.1 Jun's Mod V1.02b.iso in Hyper-V (Gen1) with no luck. The virtual machine doesn't boot with it. Still no chance to use dsm6.1 in Hyper-V? Quote Link to comment Share on other sites More sharing options...
lord_kimbou Posted July 24, 2017 Share #3507 Posted July 24, 2017 Hi Every body!! I'm Amd user (mainboard QC5000-ITX). Today I try to Install new v1.02b (version DS3615xs), and for now all is working!! I do this: With "Win32DiskImager" I write the Image on USB I modify VID/PID from grub.cfg I do a Fresh installation (Keeping my files) Install this file "DSM_DS3615xs_15152.pat" from synology web Configure Admin account.. And for now all is working!!! Any hard drive problem, any lan driver problem.. If some extra test is needed by Jun, I can do! Quote Link to comment Share on other sites More sharing options...
CrazyCreator Posted July 24, 2017 Share #3508 Posted July 24, 2017 (edited) Have anyone test the last Update (DSM 6.1.3-15152 Update 1) on HP Gen8? And if yes, how you make the Update? With the Update Button in Web-Gui, or manual with the *.pat-file from synology server downloaded? OT: @lord_kimbou how you change the background image to this pic, or any other? Edited July 24, 2017 by CrazyCreator Quote Link to comment Share on other sites More sharing options...
maxime Posted July 25, 2017 Share #3509 Posted July 25, 2017 9 hours ago, CrazyCreator said: Have anyone test the last Update (DSM 6.1.3-15152 Update 1) on HP Gen8? And if yes, how you make the Update? With the Update Button in Web-Gui, or manual with the *.pat-file from synology server downloaded? OT: @lord_kimbou how you change the background image to this pic, or any other? Use the manual update from webgui and load the .pat file you previously downloaded Quote Link to comment Share on other sites More sharing options...
medric Posted July 25, 2017 Share #3510 Posted July 25, 2017 just installed ds3615 on my machine it worked great the motherboard is a supermicro x9 inte e5-2695 v2 it boots but it does not see my lsi 9211 hba it is not showing up i thought the driver for this was already built into the kernel or do i have to inject it back Quote Link to comment Share on other sites More sharing options...
lord_kimbou Posted July 25, 2017 Share #3511 Posted July 25, 2017 CrazyCreator it's very easy, you only need to go "personal" option, inside of head in up right icon (where you shut off nas), near of search box.. Personal/Desktop/Customize Desktop, and e voila!! it's easy men! Quote Link to comment Share on other sites More sharing options...
drogi Posted July 25, 2017 Share #3512 Posted July 25, 2017 (edited) Can please somebody help me with this. I bought HP ML350 which has integrated Smart Array 200i which is not supported anymore, so I bought HPSA P410 and cables and created volumes but installation still cannot see any drives or volumes and cannot install. My P410 is in slot 6 of mainboard and I have 6 drives connected to it. Can somebody tell me how this line should look like or what else to try? set sata_args='sata_uid=1 sata_pcislot=5 synoboot_satadom=1 DiskIdxMap=0C SataPortMap=222 SasIdxMap=0' Edited July 25, 2017 by drogi wrong words used Quote Link to comment Share on other sites More sharing options...
CrazyCreator Posted July 25, 2017 Share #3513 Posted July 25, 2017 4 hours ago, lord_kimbou said: CrazyCreator it's very easy, you only need to go "personal" option, inside of head in up right icon (where you shut off nas), near of search box.. Personal/Desktop/Customize Desktop, and e voila!! it's easy men! Thanks ... and done. It's easy of course Quote Link to comment Share on other sites More sharing options...
dynaguy Posted July 25, 2017 Share #3514 Posted July 25, 2017 I try to install Xpenology on baremetal and failed. During the DSM installation, I was forced to manual install but then it keep saying "Failed to install the file. The file is probably corrupted.(13)" I try to use DS3617xs so I downloaded DSM_DS3617xs_15152.pat. I checked the MD5 and it's ok. Is there anything I missed? Quote Link to comment Share on other sites More sharing options...
medric Posted July 25, 2017 Share #3515 Posted July 25, 2017 (edited) 6 hours ago, medric said: just installed ds3615 on my machine it worked great the motherboard is a supermicro x9 inte e5-2695 v2 it boots but it does not see my lsi 9211 hba it is not showing up i thought the driver for this was already built into the kernel or do i have to inject it back i have tried the ds3617 and that works with efi boot but still my card does not work its sas2008-it mode it is using the latest firmware the avago (sp) could that be the issue? and if so which firmware should i be using. also for the ds3615 i am only showing 2 cpu and for ds3617 i am only showing 4 Edited July 25, 2017 by medric Quote Link to comment Share on other sites More sharing options...
neotronic Posted July 25, 2017 Share #3516 Posted July 25, 2017 I tried to use DS3615xs 6.1 Jun's Mod V1.02b.iso in Hyper-V (Gen1) with no luck. The virtual machine doesn't boot with it. Still no chance to use dsm6.1 in Hyper-V?I have it working in Hyper-V. Not sure if It's 1.02b though. I converted the img to vhd and set it as the 1st drive. Hope it helps. Quote Link to comment Share on other sites More sharing options...
neotronic Posted July 25, 2017 Share #3517 Posted July 25, 2017 I try to install Xpenology on baremetal and failed. During the DSM installation, I was forced to manual install but then it keep saying "Failed to install the file. The file is probably corrupted.(13)" I try to use DS3617xs so I downloaded DSM_DS3617xs_15152.pat. I checked the MD5 and it's ok. Is there anything I missed? That happens if your pid and vid are not set correctly. Quote Link to comment Share on other sites More sharing options...
mar1boro Posted July 25, 2017 Share #3518 Posted July 25, 2017 2 minutes ago, neotronic said: I have it working in Hyper-V. Not sure if It's 1.02b though. I converted the img to vhd and set it as the 1st drive. Hope it helps. are u sure it was a DSM6? cause DSM5.2 for hyper-v is not a problem... Quote Link to comment Share on other sites More sharing options...
dynaguy Posted July 25, 2017 Share #3519 Posted July 25, 2017 (edited) 4 minutes ago, neotronic said: That happens if your pid and vid are not set correctly. Not sure about that. I make a new USB stick and this time I tried DS3615xs and it WORKS! Anyway, I am new and can someone tell me the different of DS3617xs and DS3615 (and 916)? I read here someone asked before and I seems not seeing answers. Thanks. BTW, found a good instruction http://blog.pztop.com/2017/07/24/Make-Xpenology-boot-loader-1.02b-for-DSM-6.1-on-Ubuntu/ Edited July 25, 2017 by dynaguy Quote Link to comment Share on other sites More sharing options...
neotronic Posted July 25, 2017 Share #3520 Posted July 25, 2017 are u sure it was a DSM6? cause DSM5.2 for hyper-v is not a problem...Yes DSM 6. I can check in the morning before work. Quote Link to comment Share on other sites More sharing options...
mar1boro Posted July 25, 2017 Share #3521 Posted July 25, 2017 15 minutes ago, neotronic said: Yes DSM 6. I can check in the morning before work. yes, please.. and if it really works dsm6+hyper-v, so please, post your boot drive image. Quote Link to comment Share on other sites More sharing options...
medric Posted July 26, 2017 Share #3522 Posted July 26, 2017 (edited) 2 hours ago, medric said: i have tried the ds3617 and that works with efi boot but still my card does not work its sas2008-it mode it is using the latest firmware the avago (sp) could that be the issue? and if so which firmware should i be using. also for the ds3615 i am only showing 2 cpu and for ds3617 i am only showing 4 I have downgrade my lsi 9211-it sas2008 from p20 to p19 and i still does not work using jun 1.02b ds3617 6.1.3 can someone respond? [ 3.119995] megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 200 6) [ 3.125607] megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006) [ 3.142392] Fusion MPT base driver 3.04.20 [ 3.142395] Copyright (c) 1999-2008 LSI Corporation [ 3.152978] Fusion MPT SPI Host driver 3.04.20 [ 3.158430] Fusion MPT SAS Host driver 3.04.20 [ 3.163786] Fusion MPT misc device (ioctl) driver 3.04.20 [ 3.163888] mptctl: Registered with Fusion MPT base driver [ 3.163891] mptctl: /dev/mptctl @ (major,minor=10,220) [ 3.174735] megasas: 06.506.00.00-rc1 Sat. Feb. 9 17:00:00 PDT 2013 [ 3.180708] mpt2sas version 20.00.00.00 loaded [ 3.180846] scsi6 : Fusion MPT SAS Host [ 3.181255] mpt2sas 0000:08:00.0: enabling device (0000 -> 0002) [ 3.181309] mpt2sas0: 64 BIT PCI BUS DMA ADDRESSING SUPPORTED, total mem (660 51852 kB) [ 3.181321] mpt2sas0: sending diag reset !! [ 3.332476] mpt2sas0: diag reset: FAILED [ 3.332635] mpt2sas0: _base_get_ioc_facts: failed getting to correct state [ 3.332903] mpt2sas0: mpt2sas_base_unmap_resources [ 3.332941] mpt2sas0: Controller resources are already freed [ 3.332943] mpt2sas0: failure at //source/lsi-mpt2sas/mpt2sas_scsih.c:11743/_ scsih_probe()! [ 3.339862] mpt3sas version 13.00.00.00 loaded Edited July 26, 2017 by medric Quote Link to comment Share on other sites More sharing options...
newbie Posted July 26, 2017 Share #3523 Posted July 26, 2017 I used v1.02b, did a baremetal install on my T20 and downloaded the latest build DSM 6.1.3-15152. It works but when I downloaded sabnzbd and nzbget the packages does not run. I received the error "failed to run the package service"? Quote Link to comment Share on other sites More sharing options...
jamesjfa Posted July 26, 2017 Share #3524 Posted July 26, 2017 I have downgrade my lsi 9211-it sas2008 from p20 to p19 and i still does not work using jun 1.02b ds3617 6.1.3 can someone respond?[ 3.119995] megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 200 6)[ 3.125607] megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)[ 3.142392] Fusion MPT base driver 3.04.20[ 3.142395] Copyright (c) 1999-2008 LSI Corporation[ 3.152978] Fusion MPT SPI Host driver 3.04.20[ 3.158430] Fusion MPT SAS Host driver 3.04.20[ 3.163786] Fusion MPT misc device (ioctl) driver 3.04.20[ 3.163888] mptctl: Registered with Fusion MPT base driver[ 3.163891] mptctl: /dev/mptctl @ (major,minor=10,220)[ 3.174735] megasas: 06.506.00.00-rc1 Sat. Feb. 9 17:00:00 PDT 2013[ 3.180708] mpt2sas version 20.00.00.00 loaded[ 3.180846] scsi6 : Fusion MPT SAS Host[ 3.181255] mpt2sas 0000:08:00.0: enabling device (0000 -> 0002)[ 3.181309] mpt2sas0: 64 BIT PCI BUS DMA ADDRESSING SUPPORTED, total mem (660 51852 kB)[ 3.181321] mpt2sas0: sending diag reset !![ 3.332476] mpt2sas0: diag reset: FAILED[ 3.332635] mpt2sas0: _base_get_ioc_facts: failed getting to correct state[ 3.332903] mpt2sas0: mpt2sas_base_unmap_resources[ 3.332941] mpt2sas0: Controller resources are already freed[ 3.332943] mpt2sas0: failure at //source/lsi-mpt2sas/mpt2sas_scsih.c:11743/_ scsih_probe()![ 3.339862] mpt3sas version 13.00.00.00 loaded I'm not sure what your setup is but I run my NAS on esx 6.5 with my lsi -9211 passed through and have no issues. I'm on the latest loader and running DS3617xs (latest DSM) Sent from my iPad using Tapatalk Pro Quote Link to comment Share on other sites More sharing options...
syahbi Posted July 26, 2017 Share #3525 Posted July 26, 2017 (edited) Guys, i try DS3617 With Asus N3150I-C, 4GB ram Kingston DDR3, and its working well, update with latest DSM version Thanks to all who contributed to this Edited July 26, 2017 by syahbi Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.