Peter Suh Posted April 8, 2022 Share #2076 Posted April 8, 2022 25 minutes ago, titoum said: i don't really share this point of view tbh... It might be better to have people that really want to have those version on a BareMetal testing it and reporting/fixing. As you mentioned, he should be quite overloaded already so asking for more from a person doing that during free time doesn't make sense. Do you know what pre-test means? The developed program has a minimal test of the developer himself. If even this is not an environment for @pocopico to help, I will not make any more unreasonable demands. 1 Quote Link to comment Share on other sites More sharing options...
Bose321 Posted April 8, 2022 Share #2077 Posted April 8, 2022 13 hours ago, Bose321 said: Can someone help me with getting it to work on Unraid? After building it does seem to build. but it seems like there is no network attached. I only see lo when I do ifconfig on the cli. I've tried both virtio and virtio-net and br0 and virtual br0. Even tried adding two interfaces. The weird thing is that I do see the eth0 and eth1 interfaces when I am in the loader... But not after building in DSM. Also tried to add this, but not working: https://github.com/jumkey/redpill-load/raw/develop/redpill-virtio/rpext-index.json Just tried to set it to e1000 in Unraid (via de XML editor), and again in the loader I see the e1000 interface, and I've got internet and an IP address and it works, but after building again only a lo adapter. During the build I even see that it does say to load the e1000 adapter for ethernet. What's wrong here? Quote Link to comment Share on other sites More sharing options...
aliens Posted April 8, 2022 Share #2078 Posted April 8, 2022 On 4/6/2022 at 9:39 PM, pocopico said: Can you try 18? i try this but the system return grub error, display grub prompt. Any suggest? help me!.... please Quote Link to comment Share on other sites More sharing options...
ulissessantos Posted April 8, 2022 Share #2079 Posted April 8, 2022 On 4/7/2022 at 8:45 AM, coint_cho said: Ok, looks like my NIC is the issue here.. And looks like there’s some other issues as well, is there any solutions to any of these? If these are Ethernet based errors, maybe switching to vmxnet3 would help? Or virtio? I have the same error, how to fix? Quote Link to comment Share on other sites More sharing options...
siri_uk Posted April 8, 2022 Share #2080 Posted April 8, 2022 I'm currently running DSM 7.0.1 42218 using model 918+, using apollolake, is it possible to got up to 7.1 with the 918+ as the model or would I need to change to 920 or 3622 TIA 1 Quote Link to comment Share on other sites More sharing options...
Indio Posted April 8, 2022 Share #2081 Posted April 8, 2022 21 hours ago, alienman said: Hi @Indio, The module is running. It's sufficient to see in the dmesg log of the DSM the lines "... smart_shim.c:818> Handling ioctl ...". So until here, all is right installed. Regarding your problem, I see that all seems OK with the HD. What's the problem now? Remember that I'm using VMWARE ESXi and not PROMOX. So I don't know how to enable VIRTUAL SSD in the qemu configuration. However, I feel it can be enabled. Search in the documentation about how to mark a virtual harddisk as SSD. Regards. Hi again, the main problem is that proxmox only allow 6 sata drives to be passthrough to an VM, so, if I want more than 6 I have to try to add them as SCSI instead of SATA, and as SCSI they don't show in DSM . Quote Link to comment Share on other sites More sharing options...
RedwinX Posted April 8, 2022 Share #2082 Posted April 8, 2022 21 hours ago, RedwinX said: VMware ESXi didn't work for me. The only worked version installed for me is 7.0.1-42218 (918+ but whatever version), and I didn't remember how I did... The only think I know/see is that it's mandatory to have 2 network interfaces to get 1 working (5 for 3622xs+). Current working version (7.0.1) has 2 network insterface and it work. BIOS mode and that's it... 1 vmdk (convert with v2v converter) in SATA 0:0 and 1 disk of DATA (4To thin provisioning) in SATA 0:1. Cannot reproduce a working VM with same configuration with current redpill-loader, 7.0.1 or 7.1. Try many platform, not working. No visible error at boot (serial console). First boot and install are ok. But said that the system is in repair state after first reboot. @pocopicoI'm wondering if the kernel has not change, because the RC version has disapear, but have the same build number. Do you think I have to regenerate the BSP ? Regenerating now, and compare the 2 files... I will let you know EDIT : same binary... And just for information, I'm on ESXi 7.0u2. @pocopicoCannot boot with your vmdk tinycore, it said that it's an incorrect format. The only way to get a working version is to convert the img to vmdk (v2v converter) Found solution. Please make a 6.7u2 compatibility VM in order to work, and don't fogot like me that the new 7.1 build is 661 and not 621. So make a new bsp etc... Works fine now Quote Link to comment Share on other sites More sharing options...
Peter Suh Posted April 8, 2022 Share #2083 Posted April 8, 2022 A few hours ago, the ds3622xs+ bsp was shown, so I finished building with TCRP using the bsp. It was successful by modifying the Intel ext of the pocopico. It was possible to jump to 7.0.1-42218 -> 7.1.0-42661 by two step update. I think it's because misc and boot-wait are not ready at the moment There is a file corruption phenomenon in 56% of the pat file installation. 1 Quote Link to comment Share on other sites More sharing options...
RacerX Posted April 8, 2022 Share #2084 Posted April 8, 2022 FYI Previously, when I was stuck with the 56% issue intel z370 ds918 apollolake-7.0.1-42218 the only thing that worked for me was proxmox 7.01 Quote Link to comment Share on other sites More sharing options...
coint_cho Posted April 8, 2022 Share #2085 Posted April 8, 2022 8 hours ago, ulissessantos said: I have the same error, how to fix? No idea, still waiting on a potential fix from pocopico probably, if I had to guess it's just an issue with the VM? No idea Quote Link to comment Share on other sites More sharing options...
coint_cho Posted April 8, 2022 Share #2086 Posted April 8, 2022 3 minutes ago, coint_cho said: No idea, still waiting on a potential fix from pocopico probably, if I had to guess it's just an issue with the VM? No idea Oh, I just tested a switching from qemu64 CPU to host in Proxmox and I'm instantly dropped into the web UI and currently it's done being setup... Well that was a stupid fix, if I had to guess it's probably something to do with DS3622xs requiring a specific CPU function flag and qemu64 just doesn't have that? As qemu64 is designed to have bare minimal CPU flags afaik. My host cpu is E3-1275 v6 for reference. Quote Link to comment Share on other sites More sharing options...
Badger Posted April 8, 2022 Share #2087 Posted April 8, 2022 I'll be attempting a Tinycore build for my existing setup (3615xs w/ 6.2.3-25426 Update 3). I have three 4TB drives installed. Should I leave them as is, or format and remove all partitions before I start? They're JBOD. It would be nice if I didn't have to do a restore, but I can go either way since I have everything backed up. Quote Link to comment Share on other sites More sharing options...
petr_z Posted April 8, 2022 Share #2088 Posted April 8, 2022 3 часа назад, Peter Suh сказал: There is a file corruption phenomenon in 56% of the pat file installation. to fix it, you need to disconnect the Internet connection during installation Quote Link to comment Share on other sites More sharing options...
pocopico Posted April 8, 2022 Author Share #2089 Posted April 8, 2022 (edited) 11 minutes ago, Badger said: I'll be attempting a Tinycore build for my existing setup (3615xs w/ 6.2.3-25426 Update 3). I have three 4TB drives installed. Should I leave them as is, or format and remove all partitions before I start? They're JBOD. It would be nice if I didn't have to do a restore, but I can go either way since I have everything backed up. Leave them as is. Backup is always recommended Edited April 8, 2022 by pocopico Quote Link to comment Share on other sites More sharing options...
Dvalin21 Posted April 8, 2022 Share #2090 Posted April 8, 2022 (edited) 39 minutes ago, petr_z said: to fix it, you need to disconnect the Internet connection during installation That never worked for me Edited April 8, 2022 by Dvalin21 Quote Link to comment Share on other sites More sharing options...
Dvalin21 Posted April 8, 2022 Share #2091 Posted April 8, 2022 4 hours ago, Peter Suh said: A few hours ago, the ds3622xs+ bsp was shown, so I finished building with TCRP using the bsp. It was successful by modifying the Intel ext of the pocopico. It was possible to jump to 7.0.1-42218 -> 7.1.0-42661 by two step update. I think it's because misc and boot-wait are not ready at the moment There is a file corruption phenomenon in 56% of the pat file installation. Awesome!! what is bsp? Quote Link to comment Share on other sites More sharing options...
Peter Suh Posted April 8, 2022 Share #2092 Posted April 8, 2022 (edited) 1 hour ago, Dvalin21 said: Awesome!! what is bsp? I don't know exactly what BSP is. The final version came up and I just used it. The link below seems to be an action related to this, but I don't know how to turn it. I'd appreciate it if you could let me know if anyone knows. https://github.com/dogodefi/redpill-load/actions Edited April 8, 2022 by Peter Suh Quote Link to comment Share on other sites More sharing options...
Peter Suh Posted April 9, 2022 Share #2093 Posted April 9, 2022 Migration succeeded with two bootloaders. Use 7.1.0-42661 (regular version) as a manual DSM update on 7.0.1-42118 During the reboot process, I replaced it with the 7.1.0-42661 bootloader that I built yesterday The update is working well. The PC1 for my XPENOLOGY test I used yesterday was changed to PC2 because I kept getting this 56% error last time. I should proceed with the installation again after HDD CLEAR instead of updating the migration. Quote Link to comment Share on other sites More sharing options...
phone guy Posted April 9, 2022 Share #2094 Posted April 9, 2022 So whats the current status for apollolake (ds918 or ds920) 7.1 42661, as I am currently running 7.0.1u3 42218? @pocopico said wait a few days until a direct update path was more clear. 1 Quote Link to comment Share on other sites More sharing options...
Peter Suh Posted April 9, 2022 Share #2095 Posted April 9, 2022 (edited) Before the official version of @pocopico comes out, anyone who wants to try it first should try it. Download "tc.zip" from the Google link below, copy it from the window to the TC You can destroy the existing tc folder and unzip the file you just received and replace it. Permission adjustment is also required, so please follow the command below. The Intel driver/misc/boot-wait is already in the adjusted state and should not be downloaded again. Do not use actions such as update/clean/fullupgrade. Even if you ask if you want to check the internet and change it to a new version, you have to do N. Realtek r8169 is not included, so if you need it, please download it. You only need to carry out the three builds below. --------------------------------------------------------------------- https://drive.google.com/file/d/1mjv2knHo2aWICnQD_6xbeUirIlgWYICM/view?usp=sharing scp [download path]/tc.zip tc@192.168.1.2:/home cd /home sudo rm -rf tc unzip tc cd tc chmod -R 755 * (Already included and omitted) ./rploader.sh ext broadwellnk-7.0.1-42218 add https://raw.githubusercontent.com/PeterSuh-Q3/rp-ext/master/igb/rpext-index.json ./rploader.sh ext broadwellnk-7.0.1-42218 add https://raw.githubusercontent.com/PeterSuh-Q3/rp-ext/master/e1000e/rpext-index.json (Run if necessary) ./rploader.sh ext broadwellnk-7.0.1-42218 add https://raw.githubusercontent.com/PeterSuh-Q3/rp-ext/master/mpt3sas/rpext-index.json ./rploader.sh ext broadwellnk-7.0.1-42218 add https://raw.githubusercontent.com/PeterSuh-Q3/rp-ext/master/r8169/rpext-index.json (Repeat twice, type y for all questions) ./rploader.sh build broadwellnk-7.0.1-42218 manual ./rploader.sh build broadwellnk-7.0.1-42218 manual (This question needs to come up) Want to use firmware files from /home/tc/custom-module/*.pat ? [yY/nN] : y (Already included and omitted) ./rploader.sh ext broadwellnk-7.1.0-42661 add https://github.com/PeterSuh-Q3/redpill-load/raw/develop/redpill-misc/rpext-index.json ./rploader.sh ext broadwellnk-7.1.0-42661 add https://github.com/PeterSuh-Q3/redpill-ext/blob/master/redpill-boot-wait/rpext-index.json ./rploader.sh ext broadwellnk-7.1.0-42661 add https://raw.githubusercontent.com/PeterSuh-Q3/rp-ext/master/igb/rpext-index.json ./rploader.sh ext broadwellnk-7.1.0-42661 add https://raw.githubusercontent.com/PeterSuh-Q3/rp-ext/master/e1000e/rpext-index.json (recovering redpill.ko, type y for all questions) cp *load/ext/*lkm/redpill-linux-v4.4.180+.ko ./redpill.ko cp *load/ext/*lkm/redpill-linux-v4.4.180+.ko ./custom-module/redpill.ko ./rploader.sh build broadwellnk-7.1.0-42661 manual Edited April 9, 2022 by Peter Suh 1 Quote Link to comment Share on other sites More sharing options...
Peter Suh Posted April 9, 2022 Share #2096 Posted April 9, 2022 You don't have to worry about the 56% and 57% stop. I think it's because it's a muxed sata board On another board, considering the muxed sata, the sataportmap was shortened, adjusted, and the 7.1 official new installation was successfully. Normal installation is over 61%. 1 Quote Link to comment Share on other sites More sharing options...
Peter Suh Posted April 9, 2022 Share #2097 Posted April 9, 2022 3 hours ago, Peter Suh said: Before the official version of @pocopico comes out, anyone who wants to try it first should try it. Download "tc.zip" from the Google link below, copy it from the window to the TC You can destroy the existing tc folder and unzip the file you just received and replace it. Permission adjustment is also required, so please follow the command below. The Intel driver/misc/boot-wait is already in the adjusted state and should not be downloaded again. Do not use actions such as update/clean/fullupgrade. Even if you ask if you want to check the internet and change it to a new version, you have to do N. Realtek r8169 is not included, so if you need it, please download it. You only need to carry out the three builds below. --------------------------------------------------------------------- https://drive.google.com/file/d/1mjv2knHo2aWICnQD_6xbeUirIlgWYICM/view?usp=sharing scp [download path]/tc.zip tc@192.168.1.2:/home cd /home sudo rm -rf tc unzip tc cd tc chmod -R 755 * (Already included and omitted) ./rploader.sh ext broadwellnk-7.0.1-42218 add https://raw.githubusercontent.com/PeterSuh-Q3/rp-ext/master/igb/rpext-index.json ./rploader.sh ext broadwellnk-7.0.1-42218 add https://raw.githubusercontent.com/PeterSuh-Q3/rp-ext/master/e1000e/rpext-index.json (Run if necessary) ./rploader.sh ext broadwellnk-7.0.1-42218 add https://raw.githubusercontent.com/PeterSuh-Q3/rp-ext/master/mpt3sas/rpext-index.json ./rploader.sh ext broadwellnk-7.0.1-42218 add https://raw.githubusercontent.com/PeterSuh-Q3/rp-ext/master/r8169/rpext-index.json (Repeat twice, type y for all questions) ./rploader.sh build broadwellnk-7.0.1-42218 manual ./rploader.sh build broadwellnk-7.0.1-42218 manual (This question needs to come up) Want to use firmware files from /home/tc/custom-module/*.pat ? [yY/nN] : y (Already included and omitted) ./rploader.sh ext broadwellnk-7.1.0-42661 add https://github.com/PeterSuh-Q3/redpill-load/raw/develop/redpill-misc/rpext-index.json ./rploader.sh ext broadwellnk-7.1.0-42661 add https://github.com/PeterSuh-Q3/redpill-ext/blob/master/redpill-boot-wait/rpext-index.json ./rploader.sh ext broadwellnk-7.1.0-42661 add https://raw.githubusercontent.com/PeterSuh-Q3/rp-ext/master/igb/rpext-index.json ./rploader.sh ext broadwellnk-7.1.0-42661 add https://raw.githubusercontent.com/PeterSuh-Q3/rp-ext/master/e1000e/rpext-index.json (recovering redpill.ko, type y for all questions) cp *load/ext/*lkm/redpill-linux-v4.4.180+.ko ./redpill.ko cp *load/ext/*lkm/redpill-linux-v4.4.180+.ko ./custom-module/redpill.ko ./rploader.sh build broadwellnk-7.1.0-42661 manual Maybe VM can do it with this. ./rploader.sh ext broadwellnk-7.0.1-42218 add https://raw.githubusercontent.com/PeterSuh-Q3/rp-ext/master/vmxnet3/rpext-index.json Quote Link to comment Share on other sites More sharing options...
coint_cho Posted April 9, 2022 Share #2098 Posted April 9, 2022 15 minutes ago, Peter Suh said: Maybe VM can do it with this. ./rploader.sh ext broadwellnk-7.0.1-42218 add https://raw.githubusercontent.com/PeterSuh-Q3/rp-ext/master/vmxnet3/rpext-index.json The issue with vmxnet3, is that it doesn't really work for some reason. I was testing it before with my 42621 installation, and for some reason it's reporting back in Xpenology as a gigabit link, but it's only a 100mb link, and even with an assigned IP, I can't reach the box as well. Quote Link to comment Share on other sites More sharing options...
Peter Suh Posted April 9, 2022 Share #2099 Posted April 9, 2022 4 hours ago, Peter Suh said: Before the official version of @pocopico comes out, anyone who wants to try it first should try it. Download "tc.zip" from the Google link below, copy it from the window to the TC You can destroy the existing tc folder and unzip the file you just received and replace it. Permission adjustment is also required, so please follow the command below. The Intel driver/misc/boot-wait is already in the adjusted state and should not be downloaded again. Do not use actions such as update/clean/fullupgrade. Even if you ask if you want to check the internet and change it to a new version, you have to do N. Realtek r8169 is not included, so if you need it, please download it. You only need to carry out the three builds below. --------------------------------------------------------------------- https://drive.google.com/file/d/1mjv2knHo2aWICnQD_6xbeUirIlgWYICM/view?usp=sharing scp [download path]/tc.zip tc@192.168.1.2:/home cd /home sudo rm -rf tc unzip tc cd tc chmod -R 755 * (Already included and omitted) ./rploader.sh ext broadwellnk-7.0.1-42218 add https://raw.githubusercontent.com/PeterSuh-Q3/rp-ext/master/igb/rpext-index.json ./rploader.sh ext broadwellnk-7.0.1-42218 add https://raw.githubusercontent.com/PeterSuh-Q3/rp-ext/master/e1000e/rpext-index.json (Run if necessary) ./rploader.sh ext broadwellnk-7.0.1-42218 add https://raw.githubusercontent.com/PeterSuh-Q3/rp-ext/master/mpt3sas/rpext-index.json ./rploader.sh ext broadwellnk-7.0.1-42218 add https://raw.githubusercontent.com/PeterSuh-Q3/rp-ext/master/r8169/rpext-index.json (Repeat twice, type y for all questions) ./rploader.sh build broadwellnk-7.0.1-42218 manual ./rploader.sh build broadwellnk-7.0.1-42218 manual (This question needs to come up) Want to use firmware files from /home/tc/custom-module/*.pat ? [yY/nN] : y (Already included and omitted) ./rploader.sh ext broadwellnk-7.1.0-42661 add https://github.com/PeterSuh-Q3/redpill-load/raw/develop/redpill-misc/rpext-index.json ./rploader.sh ext broadwellnk-7.1.0-42661 add https://github.com/PeterSuh-Q3/redpill-ext/blob/master/redpill-boot-wait/rpext-index.json ./rploader.sh ext broadwellnk-7.1.0-42661 add https://raw.githubusercontent.com/PeterSuh-Q3/rp-ext/master/igb/rpext-index.json ./rploader.sh ext broadwellnk-7.1.0-42661 add https://raw.githubusercontent.com/PeterSuh-Q3/rp-ext/master/e1000e/rpext-index.json (recovering redpill.ko, type y for all questions) cp *load/ext/*lkm/redpill-linux-v4.4.180+.ko ./redpill.ko cp *load/ext/*lkm/redpill-linux-v4.4.180+.ko ./custom-module/redpill.ko ./rploader.sh build broadwellnk-7.1.0-42661 manual Google Drive's tc.zip was deleted due to permission issues and replaced with the following tc.tgz. https://drive.google.com/file/d/1Msg-dBHns__GexG0WcA6qdS6RI30YqH_/view?usp=sharing scp [download path]/tc.tgz tc@192.168.1.2:/home cd /home sudo rm -rf tc tar -xvf tc.tgz cd tc 2 Quote Link to comment Share on other sites More sharing options...
coint_cho Posted April 9, 2022 Share #2100 Posted April 9, 2022 20 minutes ago, coint_cho said: The issue with vmxnet3, is that it doesn't really work for some reason. I was testing it before with my 42621 installation, and for some reason it's reporting back in Xpenology as a gigabit link, but it's only a 100mb link, and even with an assigned IP, I can't reach the box as well. Either it'll have to be rtl8139 or e1000 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.