Indio

I don't know if I was clear @cferra, I was not able to make the nvme appear on DSM, only appears on the in the linux OS of the DSM as shown in my first post.

@cferra, I have in proxmox with passthrough.

Will NVME work if I change to DSM7.1? I have 7.0.1

Yes, I already added one more drive by this method, but I don't know if is possible to add more than one.

Thank you @bigbearXL but proxmox has sata limitations in the number of drives you can have in a VM. I have all full: I am trying to add them as SCSI but was not successful.

Hi again, @pocopico I made the changes you suggested, but I think I did something wrong: I don't like the error code RIP 😁 [ 3.181638] RIP [<ffffffff8140651d>] ata_host_start.part.44+0x1bd/0x1e0 [ 3.181638] RSP <ffff880526203bc8> [ 3.181638] CR2: 0000000000000120 [ 3.181638] ---[ end trace 1444ecca4539818b ]--- [ 3.274699] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000009 [ 3.274699] [ 3.275671] Kernel Offset: disabled [ 3.275671] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000009 [ 3.275671]

Hi @pocopico, thank you once again. Can you please show me an example how can add the file in user_config.json? Thank you.

Did you generated a valid serial?

try to build again the at file and download again from TC with scp for example and try again.

Hi @pocopico, thanks for taking your time to answer my question. Was not the same, I changed right now, rebooted, and have the same result

Hi all, I am trying to follow some guides here in the forum how to setup the SSD cache in my NAS but without success. I have Proxmox 7.1-7 with an VM of DS3622xs+ (DSM 7.0.1-42218) with redpill. The NVME in Proxmox was passthrough by PCI and in the DSM console is visible with address 0000:00:10.0: user@NAS:~$ lspci 0000:00:00.0 Host bridge: Intel Corporation 440FX - 82441FX PMC [Natoma] (rev 02) 0000:00:01.0 ISA bridge: Intel Corporation 82371SB PIIX3 ISA [Natoma/Triton II] 0000:00:01.1 IDE interface: Intel Corporation 82371SB PIIX3 IDE [Natoma/Triton II] 0000:00:01.2 USB controller: Intel Corporation 82371SB PIIX3 USB [Natoma/Triton II] (rev 01) 0000:00:01.3 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ACPI (rev 03) 0000:00:02.0 VGA compatible controller: Red Hat, Inc. Virtio GPU (rev 01) 0000:00:03.0 Unclassified device [00ff]: Red Hat, Inc. Virtio memory balloon 0000:00:05.0 SCSI storage controller: Broadcom / LSI 53c895a 0000:00:07.0 SATA controller: Intel Corporation 82801IR/IO/IH (ICH9R/DO/DH) 6 port SATA Controller [AHCI mode] (rev 02) 0000:00:0b.0 SATA controller: Intel Corporation 82801IR/IO/IH (ICH9R/DO/DH) 6 port SATA Controller [AHCI mode] (rev 02) 0000:00:10.0 Non-Volatile memory controller: Micron/Crucial Technology P2 NVMe PCIe SSD (rev 01) 0000:00:12.0 Ethernet controller: VMware VMXNET3 Ethernet Controller (rev 01) 0000:00:1e.0 PCI bridge: Red Hat, Inc. QEMU PCI-PCI bridge 0000:00:1f.0 PCI bridge: Red Hat, Inc. QEMU PCI-PCI bridge 0001:09:00.0 SATA controller: Marvell Technology Group Ltd. 88SE9235 PCIe 2.0 x2 4-port SATA 6 Gb/s Controller (rev 11) 0001:0c:00.0 SATA controller: Marvell Technology Group Ltd. 88SE9235 PCIe 2.0 x2 4-port SATA 6 Gb/s Controller (rev 11) In the file /etc.defaults/extensionPorts I changed to the nvme address: [pci] pci1="0000:00:10.0" In fact, in the OS is clear that is connected: user@NAS:~# nvme list Node SN Model Namespace Usage Format FW Rev ---------------- -------------------- ---------------------------------------- --------- -------------------------- ---------------- -------- /dev/nvme0n1 2113E591230F CT1000P2SSD8 1 1.00 TB / 1.00 TB 512 B + 0 B P2CR033 The problem is that in the DSM nothing apears: Any suggestion how to add an SSD cache or what is the problem with my setup? Thank you.

Hi again, the main problem is that proxmox only allow 6 sata drives to be passthrough to an VM, so, if I want more than 6 I have to try to add them as SCSI instead of SATA, and as SCSI they don't show in DSM .

Hi, I am on VM, in a VM there is a SATA limitation of 6 disks. Thank you for trying to help.

Hi, I tried your patched file and did not worked

Hi, yes I did, this is the print I have after the reboot.

Yes, does not show any information in DSM. I have rebooted.

Hi all, I have DS3622xs+ installed on proxmox but since there is a sata limitation on the number of drives I an add 6 (0 to 5), and I want to add some more drives to my synology, is possible to add them as SCSI? I tried to add, build again with red pill and nothing appear on DSM. Any light how to add more drives to my synology? Thank you.

Hi all, Can any one help me find what i am doing wrong? Can't make the nvme apear on DSM. Thank you.

Hi, I had the same problem. Just add to the /etc/pve/nodes/{server name}/qemu-server/{your VM}.conf this: args: -device ahci,id=ahci1,multifunction=on,bus=pci.0,addr=0xb -drive 'file=/dev/disk/by-id/{ata-ST500DM009-2F110A_ZA480LWF},if=none,id=drive-sata6,format=raw,aio=threads,detect-zeroes=unmap' -device ide-hd,bus=ahci1.1,drive=drive-sata6,id=sata6 Change ata-ST500DM009-2F110A_ZA480LWF with your hdd. Credits to original post: https://forum.proxmox.com/threads/limit-on-number-of-pass-through-sata-drives.28979/post-311466

Hi all, first, I would like to tank the xpenology team for the great work, and in this case, a special thanks to @pocopico. I am trying to install redpill in my HP DL80 with proxmox 7.1, and install DS918+ because of the SHR support but in the installation of the *.pat file I get an error: "Fail to install DSM, was not possible to format disk". Any suggestion how to solve this? Thanks.