pocopico Posted March 23, 2022 Author Share #1576 Posted March 23, 2022 5 hours ago, bymaxi said: i made "SataPortMap": "2", "DiskIdxMap": "02", "sata_remap": "4\\>2:2\\>4:5\\>3:3\\>5" and he sees two disks 3, 4. If I do "SataPortMap": "3", "DiskIdxMap": "01", "sata_remap": "4\\>2:2\\>4:5\\>3:3\\>5" it doesn't see disk 4 Thats not right, can you please pass the output of lsscsi -Hvt and lsscsi -vt Quote Link to comment Share on other sites More sharing options...
RacerX Posted March 23, 2022 Share #1577 Posted March 23, 2022 (edited) pocopico I'm sorry if i caused you any aggravation/ frustration in my previous posts that was not my intention. New Test just today Proxmox, Z370 Chelsio T520 Extension cxgb4, Adaptec 71605 Extension aic94xx Installed Proxmox 7.01-2 on NVME Two spare SDD 120GB and 500GB connected to Adaptec 71605 I'm stuck at 55% when I look at the user config the script ran this it's the stock config " SataPortMap": "58", "DiskIdxMap": "0A00" lsscsi -Hvt [0] ahci sata: dir: /sys/class/scsi_host//host0 device dir: /sys/devices/pci0000:00/0000:00:1f.2/ata1/host0 [1] ahci sata: dir: /sys/class/scsi_host//host1 device dir: /sys/devices/pci0000:00/0000:00:1f.2/ata2/host1 [2] ahci sata: dir: /sys/class/scsi_host//host2 device dir: /sys/devices/pci0000:00/0000:00:1f.2/ata3/host2 [3] ahci sata: dir: /sys/class/scsi_host//host3 device dir: /sys/devices/pci0000:00/0000:00:1f.2/ata4/host3 [4] ahci sata: dir: /sys/class/scsi_host//host4 device dir: /sys/devices/pci0000:00/0000:00:1f.2/ata5/host4 [5] ahci sata: dir: /sys/class/scsi_host//host5 device dir: /sys/devices/pci0000:00/0000:00:1f.2/ata6/host5 [6] ahci sata: dir: /sys/class/scsi_host//host6 device dir: /sys/devices/pci0000:00/0000:00:1e.0/0000:05:01.0/0000:06:07.0/ata 7/host6 [7] ahci sata: dir: /sys/class/scsi_host//host7 device dir: /sys/devices/pci0000:00/0000:00:1e.0/0000:05:01.0/0000:06:07.0/ata 8/host7 [8] ahci sata: dir: /sys/class/scsi_host//host8 device dir: /sys/devices/pci0000:00/0000:00:1e.0/0000:05:01.0/0000:06:07.0/ata 9/host8 [9] ahci sata: dir: /sys/class/scsi_host//host9 device dir: /sys/devices/pci0000:00/0000:00:1e.0/0000:05:01.0/0000:06:07.0/ata 10/host9 [10] ahci sata: dir: /sys/class/scsi_host//host10 device dir: /sys/devices/pci0000:00/0000:00:1e.0/0000:05:01.0/0000:06:07.0/ata 11/host10 [11] ahci sata: dir: /sys/class/scsi_host//host11 device dir: /sys/devices/pci0000:00/0000:00:1e.0/0000:05:01.0/0000:06:07.0/ata 12/host11 [12] usb-storage usb:10-1:1.0 dir: /sys/class/scsi_host//host12 device dir: /sys/devices/pci0000:00/0000:00:02.0/usb10/10-1/10-1:1.0/host12 l sscsi -vt [1:0:0:0] cd/dvd sata:ATA QEMU DVD-ROM QM00003 /dev/sr0 dir: /sys/bus/scsi/devices/1:0:0:0 [/sys/devices/pci0000:00/0000:00:1f.2/ata2/host1/target1:0:0/1:0:0:0] [6:0:0:0] disk sata:ATA QEMU HARDDISK QM00013 /dev/sda dir: /sys/bus/scsi/devices/6:0:0:0 [/sys/devices/pci0000:00/0000:00:1e.0/0000:05:01.0/0000:06:07.0/ata7/host6/target6:0:0/6:0:0:0] [12:0:0:0] disk usb:10-1:1.0 /dev/sdb dir: /sys/bus/scsi/devices/12:0:0:0 [/sys/devices/pci0000:00/0000:00:02.0/usb10/10-1/10-1:1.0/host12/target12:0:0/12:0:0:0] Any help would be appreciated... Edited March 23, 2022 by RacerX Quote Link to comment Share on other sites More sharing options...
MajkelP Posted March 23, 2022 Share #1578 Posted March 23, 2022 I would like ask for help, I am building apollolake-7.0.1-42218, after this command: "sudo ./rploader.sh satamap now" I am getting: tc@box:~$ sudo ./rploader.sh satamap now HBA: 00:17.0 Disks : 4 ls: cannot access '/sys/devices/pci0000:00/0000:00:1b.0/0000:01:00.0/port*': No such file or directory HBA: 00:1b.0 Disks : 0 ls: cannot access '/sys/devices/pci0000:00/0000:00:1b.0/0000:01:00.0/port*': No such file or directory SataPortMap=40 DiskIdxMap=0001 Should i update the user_config.json with these values ? [Yy/Nn] Probably this is nvme Samsun SM961 drive im M2 slot. and after final command: "sudo ./rploader.sh build apollolake-7.0.1-42218" I am getting below messages: Found VGA Controller : pciid 8086d00001912 Required Extension : i915 Searching for matching extension for i915 Found SATA Controller : pciid 8086d0000a102 Required Extension : ahci Searching for matching extension for ahci At the end I am getting final ds918p_42218.pat file and DS918 is visible in the network and I can install DSM but I would like use nvme cache and maybe install missed drivers. i915,ahci. I cannot find above extensions here: https://github.com/pocopico/rp-ext My hardware: motherboard Asus Z170I Pro Gaming Mini ITX and Intel i5 6600K, Thanks Quote Link to comment Share on other sites More sharing options...
mattyjasper Posted March 23, 2022 Share #1579 Posted March 23, 2022 19 hours ago, bymaxi said: I haven't slept for 2 nights. I get the error "We've detected errors on the hard drives (3, 4)…". I have 4 HDDs installed, Sata 0-3 on the motherboard. In redpill they are visible as 1,2,5,6. I have tried various Sataportmap and DiskIdxMap and even sata_remap. SataPortMap=6, DiskIdxMap=00 (error 3,4), SataPortMap=4, DiskIdxMap=00 (error 3,4), SataPortMap=2, DiskIdxMap=00 (only sees disks 1,2), SataPortMap=2, DiskIdxMap= 04 (sees disks only 3.4). i have tried sata_remap and ahci_remap (4\\>2:2\\>4:5\\>3:3\\>5) in extra_cmdline and still getting disk 3.4 error. I am using h61m-ds2, core i3-2100, 8Gb RAM, DS3615xs. Does anyone have any thoughts? I'm getting the same Drive (3,4) errors no matter what I try (done basically the same you have, as well as setting the "internalportcfg" to 0x33 which should disregard drives 3 & 4 but it doesn't take any affect). My motherboard is a Gigabyte H81M-S2V - it has 2x SATA3 ports and 2x SATA2 ports. Any assistance grateful from the community to get this working on my hardware - it looks like a very common issue! Quote Link to comment Share on other sites More sharing options...
cferra Posted March 23, 2022 Share #1580 Posted March 23, 2022 7 hours ago, pehun said: Talking about network cards, did anybody tried the 10GB synology card? Have this since 1 or 2 years inside my xpeno... The official synology cards have an odd pcie layout that seem to disable the card in a standard pcie slot - I purchased the latest version of their 10gig card from Amazon and the system did not even detect the card. Quote Link to comment Share on other sites More sharing options...
cferra Posted March 23, 2022 Share #1581 Posted March 23, 2022 Same with their SAS3 hba card - my pc would not detect the card when inserted Quote Link to comment Share on other sites More sharing options...
bymaxi Posted March 24, 2022 Share #1582 Posted March 24, 2022 5 часов назад, pocopico сказал: Thats not right, can you please pass the output of lsscsi -Hvt and lsscsi -vt Цитата tc@box:~$ lsscsi -Hvt [0] ahci sata: dir: /sys/class/scsi_host//host0 device dir: /sys/devices/pci0000:00/0000:00:1f.2/ata1/host0 [1] ahci sata: dir: /sys/class/scsi_host//host1 device dir: /sys/devices/pci0000:00/0000:00:1f.2/ata2/host1 [2] ahci sata: dir: /sys/class/scsi_host//host2 device dir: /sys/devices/pci0000:00/0000:00:1f.2/ata3/host2 [3] ahci sata: dir: /sys/class/scsi_host//host3 device dir: /sys/devices/pci0000:00/0000:00:1f.2/ata4/host3 [4] ahci sata: dir: /sys/class/scsi_host//host4 device dir: /sys/devices/pci0000:00/0000:00:1f.2/ata5/host4 [5] ahci sata: dir: /sys/class/scsi_host//host5 device dir: /sys/devices/pci0000:00/0000:00:1f.2/ata6/host5 [6] usb-storage usb:1-1.1:1.0 dir: /sys/class/scsi_host//host6 device dir: /sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/host6 Цитата tc@box:~$ lsscsi -vt [0:0:0:0] disk sata:5000039fdef5c109 /dev/sda dir: /sys/bus/scsi/devices/0:0:0:0 [/sys/devices/pci0000:00/0000:00:1f.2/ata1/host0/target0:0:0/0:0:0:0] [1:0:0:0] disk sata:5000039fdecb26eb /dev/sdb dir: /sys/bus/scsi/devices/1:0:0:0 [/sys/devices/pci0000:00/0000:00:1f.2/ata2/host1/target1:0:0/1:0:0:0] [4:0:0:0] disk sata:5000039fdef614ca /dev/sdc dir: /sys/bus/scsi/devices/4:0:0:0 [/sys/devices/pci0000:00/0000:00:1f.2/ata5/host4/target4:0:0/4:0:0:0] [5:0:0:0] disk sata:5000039fdfc2af8e /dev/sdd dir: /sys/bus/scsi/devices/5:0:0:0 [/sys/devices/pci0000:00/0000:00:1f.2/ata6/host5/target5:0:0/5:0:0:0] [6:0:0:0] disk usb:1-1.1:1.0 /dev/sde dir: /sys/bus/scsi/devices/6:0:0:0 [/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/host6/target6:0:0/6:0:0:0] Here is what i get by doing lspci -nnq Цитата tc@box:~$ lspci -nnq 00:00.0 Host bridge [0600]: Intel Corporation 2nd Generation Core Processor Family DRAM Controller [8086:0100] (rev 09) 00:02.0 VGA compatible controller [0300]: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller [8086:0102] (rev 09) 00:16.0 Communication controller [0780]: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 [8086:1c3a] (rev 04) 00:1a.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 [8086:1c2d] (rev 05) 00:1b.0 Audio device [0403]: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller [8086:1c20] (rev 05) 00:1c.0 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 [8086:1c10] (rev b5) 00:1c.4 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 5 [8086:1c18] (rev b5) 00:1d.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 [8086:1c26] (rev 05) 00:1f.0 ISA bridge [0601]: Intel Corporation H61 Express Chipset Family LPC Controller [8086:1c5c] (rev 05) 00:1f.2 SATA controller [0106]: Intel Corporation 6 Series/C200 Series Chipset Family SATA AHCI Controller [8086:1c02] (rev 05) 00:1f.3 SMBus [0c05]: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller [8086:1c22] (rev 05) 02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 06) Thanks Quote Link to comment Share on other sites More sharing options...
painkiller895 Posted March 24, 2022 Share #1583 Posted March 24, 2022 (edited) On 3/21/2022 at 6:15 AM, Dominik said: Hi @painkiller895 @pocopico I tried the buildin nic (intel i211at) but no success... Any other advises? Greetings Dominik Plug in a intel nic card Then build your loader. it should work Do not use internal card... Edited March 24, 2022 by painkiller895 Quote Link to comment Share on other sites More sharing options...
Dvalin21 Posted March 24, 2022 Share #1584 Posted March 24, 2022 Has anyone who is using perc H310, can you share your satamap and diskid? I had to end of migrating my old system from the 6.2.3 to 7.0.1 from 3617 to 3622. Thanks in advance. Quote Link to comment Share on other sites More sharing options...
Dvalin21 Posted March 24, 2022 Share #1585 Posted March 24, 2022 Just an FYI Acronis True Image is not supported on DSM 7.0.1, with that being said it removed the spk and now I have no way to access the backups I have on my drives. if anyone else has ran into this and can shed some light i would appreciate it. Thanks. Quote Link to comment Share on other sites More sharing options...
MajkelP Posted March 24, 2022 Share #1586 Posted March 24, 2022 (edited) . Edited March 24, 2022 by MajkelP duplicate post Quote Link to comment Share on other sites More sharing options...
MajkelP Posted March 24, 2022 Share #1587 Posted March 24, 2022 3 hours ago, Dvalin21 said: Has anyone who is using perc H310, can you share your satamap and diskid? I had to end of migrating my old system from the 6.2.3 to 7.0.1 from 3617 to 3622. Thanks in advance. Maybe this can help you. https://github.com/pocopico/tinycore-redpill/issues/42 and this https://xpenology.com/forum/topic/56163-discussion-on-lsi-array-cards-of-dsm70/?tab=comments#comment-267349 I think you have to flash your controller to IT mode and add drivers. 1 Quote Link to comment Share on other sites More sharing options...
pocopico Posted March 24, 2022 Author Share #1588 Posted March 24, 2022 7 hours ago, bymaxi said: Here is what i get by doing lspci -nnq Thanks I think you it might be safe to conclude that SataPortMap=88 and DiskIdxMap=0008 would at least list all disks Quote Link to comment Share on other sites More sharing options...
pocopico Posted March 24, 2022 Author Share #1589 Posted March 24, 2022 11 hours ago, RacerX said: pocopico I'm sorry if i caused you any aggravation/ frustration in my previous posts that was not my intention. New Test just today Proxmox, Z370 Chelsio T520 Extension cxgb4, Adaptec 71605 Extension aic94xx Installed Proxmox 7.01-2 on NVME Two spare SDD 120GB and 500GB connected to Adaptec 71605 I'm stuck at 55% when I look at the user config the script ran this it's the stock config " SataPortMap": "58", "DiskIdxMap": "0A00" lsscsi -Hvt [0] ahci sata: dir: /sys/class/scsi_host//host0 device dir: /sys/devices/pci0000:00/0000:00:1f.2/ata1/host0 [1] ahci sata: dir: /sys/class/scsi_host//host1 device dir: /sys/devices/pci0000:00/0000:00:1f.2/ata2/host1 [2] ahci sata: dir: /sys/class/scsi_host//host2 device dir: /sys/devices/pci0000:00/0000:00:1f.2/ata3/host2 [3] ahci sata: dir: /sys/class/scsi_host//host3 device dir: /sys/devices/pci0000:00/0000:00:1f.2/ata4/host3 [4] ahci sata: dir: /sys/class/scsi_host//host4 device dir: /sys/devices/pci0000:00/0000:00:1f.2/ata5/host4 [5] ahci sata: dir: /sys/class/scsi_host//host5 device dir: /sys/devices/pci0000:00/0000:00:1f.2/ata6/host5 [6] ahci sata: dir: /sys/class/scsi_host//host6 device dir: /sys/devices/pci0000:00/0000:00:1e.0/0000:05:01.0/0000:06:07.0/ata 7/host6 [7] ahci sata: dir: /sys/class/scsi_host//host7 device dir: /sys/devices/pci0000:00/0000:00:1e.0/0000:05:01.0/0000:06:07.0/ata 8/host7 [8] ahci sata: dir: /sys/class/scsi_host//host8 device dir: /sys/devices/pci0000:00/0000:00:1e.0/0000:05:01.0/0000:06:07.0/ata 9/host8 [9] ahci sata: dir: /sys/class/scsi_host//host9 device dir: /sys/devices/pci0000:00/0000:00:1e.0/0000:05:01.0/0000:06:07.0/ata 10/host9 [10] ahci sata: dir: /sys/class/scsi_host//host10 device dir: /sys/devices/pci0000:00/0000:00:1e.0/0000:05:01.0/0000:06:07.0/ata 11/host10 [11] ahci sata: dir: /sys/class/scsi_host//host11 device dir: /sys/devices/pci0000:00/0000:00:1e.0/0000:05:01.0/0000:06:07.0/ata 12/host11 [12] usb-storage usb:10-1:1.0 dir: /sys/class/scsi_host//host12 device dir: /sys/devices/pci0000:00/0000:00:02.0/usb10/10-1/10-1:1.0/host12 l sscsi -vt [1:0:0:0] cd/dvd sata:ATA QEMU DVD-ROM QM00003 /dev/sr0 dir: /sys/bus/scsi/devices/1:0:0:0 [/sys/devices/pci0000:00/0000:00:1f.2/ata2/host1/target1:0:0/1:0:0:0] [6:0:0:0] disk sata:ATA QEMU HARDDISK QM00013 /dev/sda dir: /sys/bus/scsi/devices/6:0:0:0 [/sys/devices/pci0000:00/0000:00:1e.0/0000:05:01.0/0000:06:07.0/ata7/host6/target6:0:0/6:0:0:0] [12:0:0:0] disk usb:10-1:1.0 /dev/sdb dir: /sys/bus/scsi/devices/12:0:0:0 [/sys/devices/pci0000:00/0000:00:02.0/usb10/10-1/10-1:1.0/host12/target12:0:0/12:0:0:0] 11 hours ago, RacerX said: Any help would be appreciated... Do you select USB while at GRUB ? and have you set VID:PID correctly using : ./rploader.sh identifyusb now Quote Link to comment Share on other sites More sharing options...
Kaneske Posted March 24, 2022 Share #1590 Posted March 24, 2022 @pocopico can you add support for mpt2sas on 3622xs+ please? Quote Link to comment Share on other sites More sharing options...
pocopico Posted March 24, 2022 Author Share #1591 Posted March 24, 2022 1 minute ago, Kaneske said: @pocopico can you add support for mpt2sas on 3622xs+ please? mpt2sas on 4.4.x kernels is integrated into mpt3sas. So you will only need mpt3sas for driving mpt2sas HBAs Quote Link to comment Share on other sites More sharing options...
Kaneske Posted March 24, 2022 Share #1592 Posted March 24, 2022 (edited) Aaah ok, thx @pocopico i´ll give it a Try... @pocopico worked for me. Now Base System is up, without Data loss. Update -3 results in repair loop, is there a solution for it? Edited March 24, 2022 by Kaneske Quote Link to comment Share on other sites More sharing options...
pocopico Posted March 24, 2022 Author Share #1593 Posted March 24, 2022 34 minutes ago, Kaneske said: Aaah ok, thx @pocopico i´ll give it a Try... @pocopico worked for me. Now Base System is up, without Data loss. Update -3 results in repair loop, is there a solution for it? Well yes and no. At least not an easy one. I am planning to introduce it at some point at TCRP but we'll see. Quote Link to comment Share on other sites More sharing options...
Kaneske Posted March 24, 2022 Share #1594 Posted March 24, 2022 Ok, looking forward for that. Not easy is not that good news. Unfortunately, may you can share this here already? Quote Link to comment Share on other sites More sharing options...
pocopico Posted March 24, 2022 Author Share #1595 Posted March 24, 2022 (edited) A minor update on rploader.sh The rploader.sh scripts has now two new features : 1. backuploader/restoreloader so that you can backup and restore your loader contents. 2. mountdsmroot to mount your DSM root partition and perform any manual changes you like. e.g. fix the model.dtb, edit synoinfo.conf, copy over files,modules etc. Also i have created a tcrp-diag extension that will try to collect some diagnostic information and save it to an HTML format file into the diag folder on the third partition of the loader where tinycore exists. This will be very helpful for people that are headless, without serial console and not able to login remotely but not only. The tcrp-diag collection can be launced automatically if you add the word tcrpdiag in GRUB linux line (same line as sn, mac1 are ) , or it can be manually triggered once and if you have the option to telnet/ssh to DSM. The extension will always copy over to your DSM junior or DSM root the following files : lsscsi lspci lsusb dmidecode dtb tcrp-diag.sh and some required libraries. Once you have succesfully resolv all your issues, you can proceed and recreate the loader without the tcrp-diag if you dont want it. enjoy. Edited March 24, 2022 by pocopico 1 1 Quote Link to comment Share on other sites More sharing options...
cospotato Posted March 24, 2022 Share #1596 Posted March 24, 2022 On 3/23/2022 at 8:08 PM, cospotato said: Hello @pocopico! My server is ok to boot without Intel 82599 NIC. If i install the NIC. Server fall into restart loop. How to debug? Thanks! Hi @pocopico. Please look around this problem. My Server is Microserver Gen8. If i install Intel 82599 NIC. The server fall into restart loop. Thanks ! Quote Link to comment Share on other sites More sharing options...
pocopico Posted March 24, 2022 Author Share #1597 Posted March 24, 2022 13 minutes ago, cospotato said: Hi @pocopico. Please look around this problem. My Server is Microserver Gen8. If i install Intel 82599 NIC. The server fall into restart loop. Thanks ! What is your platform DS3622 ? What is your HW ? Quote Link to comment Share on other sites More sharing options...
cospotato Posted March 24, 2022 Share #1598 Posted March 24, 2022 (edited) 3 minutes ago, pocopico said: What is your platform DS3622 ? What is your HW ? Hi pocopico! I'm using DS3615xs 7.0.1-bromolow-42218. Hardware is : Microserver Gen8 with Xeon E3-1265L. The 10G NIC is Intel 82599. Edited March 24, 2022 by cospotato Quote Link to comment Share on other sites More sharing options...
pocopico Posted March 24, 2022 Author Share #1599 Posted March 24, 2022 1 minute ago, cospotato said: Hi pocopico! I'm using DSDS3615xs. Hardware is : Lets take this offline, PM me 1 Quote Link to comment Share on other sites More sharing options...
Dominik Posted March 24, 2022 Share #1600 Posted March 24, 2022 (edited) 11 hours ago, painkiller895 said: Plug in a intel nic card Then build your loader. it should work Do not use internal card... Hi @painkiller895 Thank you for your respond and interest. I installed a separate intel nic and tested all the bios and uefi 0.4.6 variants with DSM 7.0.1 of the tinycore/redpill loader but i can`t still not get any dhcp adress or access to the DSM setup homepage. @pocopico I`ve tried to setup your tcrpdiag command in GRUB to give me a hint, what the reason is, but unfortunately, i can`t get some disgnostic data. there ist nothing stored on my usb bootstick, in any folders of all partitions.. Do i have to setup this tcrpdiag command in the build command or can i place it normally with "e" in the GRUB boot screen so i can get some additional data for further research? Thank you for your answers! Dominik Edited March 24, 2022 by Dominik Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.