Dominik
-
Posts
9 -
Joined
-
Last visited
Dominik's Achievements
Newbie (1/7)
0
Reputation
-
Yes, with bios and uefi loader, but unfortunately the same result..
-
I have an amd am4 board, asrock phantom gaming 4, a dualport intel 1gb nic (for testing) and a Marvell (Aquantia) 10gb nic.
-
Yes, i think so too. But i`ve tried so many variants of different loaders for all supported DS (uefi and bios), that i`ll wait for a new kernel / image like 0.4.7 or higher.. Do you have some plans for updates? Like, to support for dsm 7.1? Dominik
-
Hi @pocopico Sry, but there is no such diag folder.. I leave the boot for 10 minutes and the message "starting kernel with usb boot" is displayed, but still no data.. Should there be more information on screen? How can i check, that the boot has been done? I guess, i have a boot-problem, the kernel can`t fully boot and that is the reason, i don`t get a dhcp adress... Btw, there are no build errors, anything is green and i tried different usb sticks. Dominik
-
Hi @pocopico Thank you for your respond and information. I`ve successfully added the extension with sudo ./rploader.sh ext broadwellnk-7.0.1-42218 add https://raw.githubusercontent.com/pocopico/rp-ext/main/tcrp-diag/rpext-index.json and build the uefi-loader 0.4.6 for DS3622xs+ after that. Unfortunately, i still don`t get any diagnostic data, when i add the tcrpdiag command in grup with "e".. Any further suggestions/solutions..? I Can`t telnet/ssh, because i don`t get an ip-address and that`s the reason for needing some disgnostic data. Sry, i`m a beginner in grub/linux and xpenology, i hope, you can help me. Dominik
-
Hi @painkiller895 Thank you for your respond and interest. I installed a separate intel nic and tested all the bios and uefi 0.4.6 variants with DSM 7.0.1 of the tinycore/redpill loader but i can`t still not get any dhcp adress or access to the DSM setup homepage. @pocopico I`ve tried to setup your tcrpdiag command in GRUB to give me a hint, what the reason is, but unfortunately, i can`t get some disgnostic data. there ist nothing stored on my usb bootstick, in any folders of all partitions.. Do i have to setup this tcrpdiag command in the build command or can i place it normally with "e" in the GRUB boot screen so i can get some additional data for further research? Thank you for your answers! Dominik
-
Hi @painkiller895 @pocopico I tried the buildin nic (intel i211at) but no success... Any other advises? Greetings Dominik
-
Hi @Aigor Thank you for your answer. To be clear, i don`t use an HP microserver, i`m using an amd mainboard, an asrock x570 phantom gaming 4. I used the DS3622xs+ variant with uefi and bios. I included also the TG3, e1000, e1000e and i40e driver. Unfortunately, this didn`t help me. It seems, that i`m still not getting any dhcp adress... It still stucks at "starting kernel with usb boot" and i`m not able to find the ds over find.synology.com and the synology assistant. I tried it with the buildin nic (intel i211at) and removed the atlantic nic, but no success. Any other suggestions..? From anyone..? Greetings Dominik
-
Hello @ all I`ve got the same problem like cospotato. I`m running the tinycore/redpill 0.4.6 version with an amd x570 board and an atlantic 10gb card and an onboard intel 221 1gb nic. I`ve tried it in uefi and bios mode, but i can`t get it to work. it seems, it doesn`t get an ip adress in any way with the atlantic or the intel nic. Please help! Greetings Dominik