Jump to content
XPEnology Community

MajkelP

Member
  • Posts

    59
  • Joined

  • Last visited

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

MajkelP's Achievements

Regular Member

Regular Member (3/7)

18

Reputation

1

Community Answers

  1. After nearly more than one year I have a problem on my DS3622x (on ESXi-7.0U3o-22348816) Today in the morning I rebooted and Redpill Friend updated to 0.0.6 and I lost three drives. I checked them in the BIOS on the LSI SAS9211-8i IT controller and all are visible. I am not quite sure what could happened. I thought maybe something crashed so I decided to update to DSM 7.2, (I was going to do it anyway ) so I did it and I used new tinycore-redpill.v0.10.0.0.vmdk file and create new bootloader I used the same MAC and SN. I have one physical drive (HDD) connected to SATA port on the motherboard and 6 SSD drives connected to above SAS controller -> pass-through. After I type ./rploader.sh satamap tc@box:~$ ./rploader.sh satamap Machine is VIRTUAL Hypervisor=VMware Found SCSI HBAs, We need to install the SCSI modules scsi-5.10.3-tinycore64 is already installed! Succesfully installed SCSI modules Found "02:00.0 VMware SATA AHCI controller" Detected 30 ports/1 drives. Mapping SATABOOT drive after maxdisks Found "02:01.0 VMware SATA AHCI controller" Detected 30 ports/1 drives. Defaulting 8 virtual ports for typical system compat ibility Override # of ports or ENTER to accept <8> Found SCSI/HBA "03:00.0 LSI Logic / Symbios Logic SAS2308 PCI-Express Fusion-MPT SAS-2 (rev 05)" (0 drives) Computed settings: SataPortMap=18 DiskIdxMap=1000 Should i update the user_config.json with these values ? [Yy/Nn] y Done. I created bootloader and proceed with installation and upgrade. In the new system I still cannot see these three drives: ( I attached pictures) I would like ask for the advice or help what I can do. Thanks M
  2. Hi, I have working DS3622xsp on ESXI 7.0U3, my bootloader is created via tinycore-redpill.v0.9.2.7. Everything works fine. I would like to update my DSM7.1.1 U6 to 7.2. I think I need newer loader. (am I right?). How I can do it without loosing any configuration, data on my DS3622xsp. Are the any special steps? What I should be aware of? I'd rather ask than have to configure and set everything up from scratch. Thanks Michael,
  3. Unfortunately, a strange error occurred. Hard to say when this happened. Beside of this everything works fine. I am able to connect to VPN but sometimes does not work. I would like fix this. Maybe this could happened after adding mcvalan on Docker I cannot select any network interface. I have got only one "LAN1" but I do not have an option to select. I am on DSM 7.1.1-42962 Update 3 my model DS3622xsp. (Red Pill, TC v0.9.3.0) - ESXi 7.0U3 I also found similar issue on the Synology forum but that fix does not match to my config I do not use any VM on m DSM. https://community.synology.com/enu/forum/1/post/134454 https://www.reddit.com/r/synology/comments/gr89qb/trying_to_setup_openvpn_but_network_interface_is/ I tired reinstall OpenVPN package but no success. The issue still presist. Thanks.
  4. @HorstHoden - good point, in google chrom did it work, but I had to turn off 2FA and YubiKey.
  5. I can confirm that on DSM 7.1.1-42962 Update 1 above activation method with serial no. doesn't work. https://myIP:port/webapi/entry.cgi?api=SYNO.ActiveBackup.Activation&method=set&version=1&activated=true&serial_number="myserial_no"
  6. I know that is old post , I am sorry I forgot to respond. That's true, after that I was able to install. Can I modify (edit) user_config.json after loader creation. I mean: these values: "SataPortMap": "xx", "DiskIdxMap": "xx" Where above file can be found? /mnt/sda3/lastsession ? Thanks,
  7. Hi, I would like ask for "safe" instruction how to update from DSM 7.1.0-42661 Update 4 to DSM 7.1.1-42962 Update 1. My model is DS3622xsp, I am on ESXi 6.7. Last time I updated DSM via GUI rebooted and I used these commands: ./rploader.sh update ./rploader.sh fullupgrade ./rploader.sh postupdate broadwellnk-7.1.0-42661 exitcheck.sh reboot and update went without any issues. This time I am not quite sure if above steps work. In custom hardware build I could build new loader using tinycore-redpill.v0.9.2.6 and replace USB stick and edit config.json file and change (vid and pid and keep DSM serial no. and mac address), but in VM? I do not want brick my system Thanks
  8. - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 7.1.1-42962 - Loader version and model: Automated Redpill Loader 0.4 alpha 8, DS918+ - Using custom extra.lzma: NO - Installation type: VMWare ESXi 6.7.0 U3b @ custom build Asus Z170I-PRO, Intel Core i5-6600K, - Additional comments: Created the bootloader with "arpl 0.4 alpha 8" from scratch
  9. For me is very stable, working very well. No issues at all. I am using Tinycore-Redpill v0.8.0.3 - DS3622xs+ on ESXi 6.7 on my custom hardware build Asus Z170I-PRO, Intel Core i5-6600K, passthrough: LSI SAS9211-8i IT mode controller. I was on Jun's loader and 3617xs but I jumped to RedPill and I can say that I am on the latest DSM 7.1.0-42661 with Update 4. Where on Jun's I could not go beyond DSM 6.2.3-25426-3 I believe. This is very nice guide, condensed topic regarding RedPill loaders. https://xpenology.com/forum/topic/61634-dsm-7x-loaders-and-platforms/ and guide how to proceed: https://xpenology.com/forum/topic/62221-tutorial-installmigrate-to-dsm-7x-with-tinycore-redpill-tcrp-loader/ Good luck
  10. - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 7.1-42661 Update 3 - Loader version and model: Tinycore-Redpill v0.8.0.3 - DS3622xs+ - Using custom extra.lzma: NO - Installation type: VMWare ESXi 6.7.0 U3b @ custom build Asus Z170I-PRO, Intel Core i5-6600K, passthrough: LSI SAS9211-8i IT mode controller. - Additional comments: Upgraded: DSM 7.1.0-42661u4 via GUI, no additional steps.
  11. ok, I managed to fixed. I would like share this with you. I spent 20h to resolve the issue. Open ESXI web UI, find network in hardware, click VM Network inside, then Edit Setting, find Security tab, modify prosmiscous mode to Accept, MAC address changes to Accept, save modify. Before I did it I closed my DS3622xsp.
  12. Hi All, A new problem has occurred to me. I installed DSM 7.1 with U3 3622xsp on ESXi 6.7U3b (7.0 doesn't support my SAS controller). Everything went smoothly. System working fine. I decided to install AdGuard on Docker using mcvlan. I did it previously on my custom hardware build without any problems. Here on ESXi I was able to install docker and AdGuard but I am unable to launch AdGuard. I followed instruction from here: https://mariushosting.com/how-to-install-adguard-on-your-synology-nas/ and here: How to Install AdGuard Home on a Synology NAS! - WunderTech but without success. The problem seems to be with network. I am not quite sure if I need add some settings to ESXi... Previously my AdGuard has it own static IP address. This is why I choose macvlan. Has anybody has similar problem? Thanks
  13. I have an update. I deleted my VM and started creating new one. I started from the beginning After creating VM DSM918+ I was able to install Update 2 and 3 in GUI. ./rploader.sh update ./rploader.sh fullupgrade ./rploader.sh postupdate apollolake-7.1.0-42661 and update(s) were successfully installed. I am not quite sure why this did not work in my first VM.
  14. Hello, I installed DSM on ESXi, thank you @flyride for great tutorial https://xpenology.com/forum/topic/62221-tutorial-installmigrate-to-dsm-7x-with-tinycore-redpill-tcrp-loader/ I did a clean install of DS918+ DSM 7.1-42661 Update 1. Everything seems to be working fine, until I wanted updated to U2. I updated via GUI and after reboot I run TC and SSH and put these commands: ./rploader.sh update now ./rploader.sh fullupgrade now ./rploader.sh backup ./rploader.sh postupdate apollolake-7.1-42661 Unfortunately afer reboot I cannot see my virtualized DS. I can see only recovery page after some time. I did exactly the same with my hardware custom build DS3622xsp and this worked. Is there any different with updating on hypervision? Second question in this thread https://xpenology.com/forum/topic/62919-dsm-71-42661-update-2/ I can see that some users has got TC RedPill in version 0.8.0.3 or 0.8.0.2 I have got 8.0.0.0. From where I can get newer one /or this make any different with update? Third question How I can turn / or it is possible to turn on trans-coding on virtualized DSM918 on ESXi7.0U3? That person @DsMan https://xpenology.com/forum/topic/62919-dsm-71-42661-update-2/#comment-286283 Seems has this working. Thanks
×
×
  • Create New...