pocopico Posted March 24, 2022 Author Share #1601 Posted March 24, 2022 3 minutes ago, Dominik said: Hi @painkiller895 Thank you for your respond and interest. I installed a separate intel nic and tested all the bios and uefi 0.4.6 variants with DSM 7.0.1 of the tinycore/redpill loader but i can`t still not get any dhcp adress or access to the DSM setup homepage. @pocopico I`ve tried to setup your tcrpdiag command in GRUB to give me a hint but unfortunately, i can`t get some disgnostic data. there ist nothing stored on my usb bootstick, in any folders of all partitions.. Do i have to setup this tcrpdiag command in the build command or can i place it normally with "e" in the GRUB boot screen so i can get some additional data for further research? Thank you for your answers! Dominik Its an extension, you have to add it as you do with any extension before you build the loader. Quote Link to comment Share on other sites More sharing options...
Dominik Posted March 24, 2022 Share #1602 Posted March 24, 2022 (edited) 27 minutes ago, pocopico said: Its an extension, you have to add it as you do with any extension before you build the loader. Hi @pocopico Thank you for your respond and information. I`ve successfully added the extension with sudo ./rploader.sh ext broadwellnk-7.0.1-42218 add https://raw.githubusercontent.com/pocopico/rp-ext/main/tcrp-diag/rpext-index.json and build the uefi-loader 0.4.6 for DS3622xs+ after that. Unfortunately, i still don`t get any diagnostic data, when i add the tcrpdiag command in grup with "e".. Any further suggestions/solutions..? I Can`t telnet/ssh, because i don`t get an ip-address and that`s the reason for needing some disgnostic data. Sry, i`m a beginner in grub/linux and xpenology, i hope, you can help me. Dominik Edited March 24, 2022 by Dominik Quote Link to comment Share on other sites More sharing options...
pocopico Posted March 24, 2022 Author Share #1603 Posted March 24, 2022 (edited) 2 minutes ago, Dominik said: Hi @pocopico Thank you for your respond and information. I`ve added the extension with sudo ./rploader.sh ext broadwellnk-7.0.1-42218 add https://raw.githubusercontent.com/pocopico/rp-ext/main/tcrp-diag/rpext-index.json and build the loader for DS3622xs+ after that. Unfortunately, i still don`t get any diagnostic data, when i add the tcrpdiag command in grup with "e".. Any further suggestions/solutions..? I Can`t telnet/ssh, because i don`t get an ip-address.. Sry, i`m a beginner in grub/linux and xpenology, i hope, you can help me. Dominik you have to leave the boot to complete. After the collection is triggered it will take about 120 secs before it’s launched. So leave it for about 5 minutes after you edit grub and boot. You will find the file under /mnt/sda3/diag folder Edited March 24, 2022 by pocopico Quote Link to comment Share on other sites More sharing options...
Dominik Posted March 24, 2022 Share #1604 Posted March 24, 2022 (edited) 16 minutes ago, pocopico said: you have to leave the boot to complete. After the collection is triggered it will take about 120 secs before it’s launched. So leave it for about 5 minutes after you edit grub and boot. You will find the file under /mnt/sda3/diag folder Hi @pocopico Sry, but there is no such diag folder.. I leave the boot for 10 minutes and the message "starting kernel with usb boot" is displayed, but still no data.. Should there be more information on screen? How can i check, that the boot has been done? I guess, i have a boot-problem, the kernel can`t fully boot and that is the reason, i don`t get a dhcp adress... Btw, there are no build errors, anything is green and i tried different usb sticks. Dominik Edited March 24, 2022 by Dominik Quote Link to comment Share on other sites More sharing options...
pocopico Posted March 24, 2022 Author Share #1605 Posted March 24, 2022 12 minutes ago, Dominik said: Hi @pocopico Sry, but there is no such diag folder.. I leave the boot for 10 minutes and the message "starting kernel with usb boot" is displayed, but still no data.. Should there be more information on screen? How can i check, that the boot has been done? I guess, i have a boot-problem, the kernel can`t fully boot and that is the reason, i don`t get a dhcp adress... Btw, there are no build errors, anything is green and i tried different usb sticks. Dominik Unfortunatelly there is always the chance to get an early KP and if this will stops the boot process the diag will not run. Try with a different loader. DS3266 is always IMHO the best option ATM Quote Link to comment Share on other sites More sharing options...
bymaxi Posted March 24, 2022 Share #1606 Posted March 24, 2022 6 часов назад, pocopico сказал: Я думаю, вы можете с уверенностью заключить, что SataPortMap=88 и DiskIdxMap=0008 по крайней мере перечислят все диски This gave me "We've detected errors on the hard drives (3, 4, 7, 8)…". Then I did SataPortMap=2 and DiskIdxMap=00. Installed DSM with two disks. Started Tiny again and did SataPortMap=6 and DiskIdxMap=00 rebuilt and started DSM. And lo and behold, I see 4 disks 1 2 5 6. Thank you for your help 1 Quote Link to comment Share on other sites More sharing options...
Null Posted March 24, 2022 Share #1607 Posted March 24, 2022 dsm 7.1 has launched，when will our loader update？ Quote Link to comment Share on other sites More sharing options...
Dominik Posted March 24, 2022 Share #1608 Posted March 24, 2022 (edited) 16 minutes ago, pocopico said: Unfortunatelly there is always the chance to get an early KP and if this will stops the boot process the diag will not run. Try with a different loader. DS3266 is always IMHO the best option ATM Yes, i think so too. But i`ve tried so many variants of different loaders for all supported DS (uefi and bios), that i`ll wait for a new kernel / image like 0.4.7 or higher.. Do you have some plans for updates? Like, to support for dsm 7.1? Dominik Edited March 24, 2022 by Dominik Quote Link to comment Share on other sites More sharing options...
pocopico Posted March 24, 2022 Author Share #1609 Posted March 24, 2022 Just now, Dominik said: Yes, i think so too. But i`ve tried so many variants of loaders for all supported DS (uefi and bios), that i`ll wait for a new loader like 0.4.7 or higher.. Do you have some plans for updates? Dominik what is your hardware ? Quote Link to comment Share on other sites More sharing options...
Dominik Posted March 24, 2022 Share #1610 Posted March 24, 2022 1 minute ago, pocopico said: what is your hardware ? I have an amd am4 board, asrock phantom gaming 4, a dualport intel 1gb nic (for testing) and a Marvell (Aquantia) 10gb nic. Quote Link to comment Share on other sites More sharing options...
cpresco Posted March 24, 2022 Share #1611 Posted March 24, 2022 44 minutes ago, Null said: dsm 7.1 has launched，when will our loader update？ To be clear, DSM 7.1-42621 Release Candidate has been released. https://www.synology.com/en-global/releaseNote/DSM Quote Link to comment Share on other sites More sharing options...
pocopico Posted March 24, 2022 Author Share #1612 Posted March 24, 2022 51 minutes ago, Dominik said: I have an amd am4 board, asrock phantom gaming 4, a dualport intel 1gb nic (for testing) and a Marvell (Aquantia) 10gb nic. Maybe then the ds1621+ loader is a better choice for you. Did you try it ? Quote Link to comment Share on other sites More sharing options...
Dominik Posted March 24, 2022 Share #1613 Posted March 24, 2022 33 minutes ago, pocopico said: Maybe then the ds1621+ loader is a better choice for you. Did you try it ? Yes, with bios and uefi loader, but unfortunately the same result.. Quote Link to comment Share on other sites More sharing options...
RacerX Posted March 24, 2022 Share #1614 Posted March 24, 2022 Quote Do you select USB while at GRUB ? and have you set VID:PID correctly using : ./rploader.sh identifyusb now pocopico In my Proxmox VM's Process wise when I finish loading the scripts I stop the vm and then when I restart the VM it defaults to boot usb. then I ping the ip when it and it it pings I open the the install in another window. Xpnoology installs correctly until 55% when it gets currupted. I did not run the Identifyub script because i'm not using a usb stick. But I can run the script, it's simple. One more thing with adaptec test. I can see the drives on the controller in bios. Proxmox does not support adaptec at all. When I load the extension with the script will dsm be able to see my drives? Or is it better test to try EXSI where I can pass thru the controller? Quote Link to comment Share on other sites More sharing options...
ditheo Posted March 24, 2022 Share #1615 Posted March 24, 2022 (edited) Hi , I am trying to build a new machine on this hardware: Intel i3-10100F Msi mag460 tomahawk (6 sata , 2 m.2) 16Gb Ram Nvidia GT630 my lspci -nnQ is root@box:/home/tc# lspci -nnq 00:00.0 Host bridge [0600]: Intel Corporation 10th Gen Core Processor Host Bridge/DRAM Registers [8086:9b63] (rev 03) 00:01.0 PCI bridge [0604]: Intel Corporation Skylake PCIe Controller (x16) [8086:1901] (rev 03) 00:08.0 System peripheral [0880]: Intel Corporation Skylake Gaussian Mixture Model [8086:1911] 00:14.0 USB controller [0c03]: Intel Corporation Comet Lake PCH-V USB Controller [8086:a3af] 00:14.2 Signal processing controller [1180]: Intel Corporation Comet Lake PCH-V Thermal Subsystem [8086:a3b1] 00:16.0 Communication controller [0780]: Intel Corporation Comet Lake PCH-V HECI Controller [8086:a3ba] 00:17.0 SATA controller [0106]: Intel Corporation 400 Series Chipset Family SATA AHCI Controller [8086:a382] 00:1b.0 PCI bridge [0604]: Intel Corporation Device [8086:a3e9] (rev f0) 00:1c.0 PCI bridge [0604]: Intel Corporation Device [8086:a392] (rev f0) 00:1c.6 PCI bridge [0604]: Intel Corporation Device [8086:a396] (rev f0) 00:1f.0 ISA bridge [0601]: Intel Corporation B460 Chipset LPC/eSPI Controller [8086:a3c8] 00:1f.2 Memory controller [0580]: Intel Corporation Cannon Lake PCH Power Management Controller [8086:a3a1] 00:1f.4 SMBus [0c05]: Intel Corporation Comet Lake PCH-V SMBus Host Controller [8086:a3a3] 00:1f.6 Ethernet controller [0200]: Intel Corporation Ethernet Connection (11) I219-V [8086:0d4d] 01:00.0 VGA compatible controller [0300]: NVIDIA Corporation GF108 [GeForce GT 630] [10de:0f00] (rev a1) 01:00.1 Audio device [0403]: NVIDIA Corporation GF108 High Definition Audio Controller [10de:0bea] (rev a1) 02:00.0 USB controller [0c03]: ASMedia Technology Inc. Device [1b21:3241] 03:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8125 2.5GbE Controller [10ec:8125] (rev 04) 04:00.0 Serial controller [0700]: MosChip Semiconductor Technology Ltd. PCIe 9901 Multi-I/O Controller [9710:9901] 04:00.1 Serial controller [0700]: MosChip Semiconductor Technology Ltd. PCIe 9901 Multi-I/O Controller [9710:9901] 04:00.2 Serial controller [0700]: MosChip Semiconductor Technology Ltd. PCIe 9901 Multi-I/O Controller [9710:9901] 04:00.3 Serial controller [0700]: MosChip Semiconductor Technology Ltd. PCIe 9901 Multi-I/O Controller [9710:9901] I add three extra modules r8125 (for my realtek 8125 10ec:8125) redpill-acpid tcrp-diag My user.json is { "extra_cmdline": { "pid": "0x6387", "vid": "0x058f", "sn": "20C0SQRVM83GH", "mac1": "0011321E8F1C", "mac2": "0011321E8F1D", "SataPortMap": "611", "DiskIdxMap": "0000" }, "synoinfo": { "internalportcfg" : "0xffff", "maxdisks" : "16", "support_bde_internal_10g" : "no", "support_disk_compatibility" : "no", "support_memory_compatibility" : "no" }, "ramdisk_copy": { } } and my log for the build is root@box:/home/tc# ./rploader.sh build broadwellnk-7.0.1-42218 jq: error (at <stdin>:1): Cannot iterate over null (null) jq: error (at <stdin>:1): Cannot iterate over null (null) Loader source : https://github.com/dogodefi/redpill-load.git Loader Branch : develop Redpill module source : https://github.com/dogodefi/redpill-lkm.git : Redpill module branch : develop Extensions : Extensions URL : TOOLKIT_URL : https://sourceforge.net/projects/dsgpl/files/toolkit/DSM7.0/ds.broadwellnk-7.0.dev.txz/download TOOLKIT_SHA : 0d9edca67d9e7e14c2529bbb58341b623936124d5264f71f1e4acbacf3ea202d SYNOKERNEL_URL : https://sourceforge.net/projects/dsgpl/files/Synology%20NAS%20GPL%20Source/25426branch/broadwellnk-source/linux-4.4.x.txz/download SYNOKERNEL_SHA : d3e85eb80f16a83244fcae6016ab6783cd8ac55e3af2b4240455261396e1e1be COMPILE_METHOD : toolkit_dev TARGET_PLATFORM : broadwellnk TARGET_VERSION : 7.0.1 TARGET_REVISION : 42218 REDPILL_LKM_MAKE_TARGET : dev-v7 KERNEL_MAJOR : 4 MODULE_ALIAS_FILE= modules.alias.4.json Checking Internet Access -> OK Checking if a newer version exists on the repo -> Version is current Redpill sources already downloaded, pulling latest Already up to date. Loader sources already downloaded, pulling latest Already up to date. No extra build option specified, using default <static> Using static compiled redpill extension Looking for redpill for : ds3622xsp_42218 Getting file https://raw.githubusercontent.com/pocopico/rp-ext/master/redpill/releases/redpill-4.4.180plus-broadwellnk.tgz Extracting module Getting file https://raw.githubusercontent.com/pocopico/rp-ext/master/redpill/src/check-redpill.sh Got redpill-linux-v4.4.180+.ko Testing modules.alias.4.json -> File OK ------------------------------------------------------------------------------------------------ It looks that you will need the following modules : Found SATA Controller : pciid 8086d0000a382 Required Extension : No matching extension [#] Checking runtime for required tools... [OK] [#] Adding new extension from https://raw.githubusercontent.com/pocopico/rp-ext/master/e1000e/rpext-index.json... [#] Downloading remote file https://raw.githubusercontent.com/pocopico/rp-ext/master/e1000e/rpext-index.json to /home/tc/redpill-load/custom/extensions/_new_ext_index.tmp_json ######################################################################## 100.0% [OK] [#] ========================================== pocopico.e1000e ========================================== [#] Extension name: e1000e [#] Description: Adds Intel(R) PRO/1000 Network Driver Support [#] To get help visit: <todo> [#] Extension preparer/packer: https://github.com/pocopico/rp-ext/tree/main/e1000e [#] Software author: https://github.com/pocopico [#] Update URL: https://raw.githubusercontent.com/pocopico/rp-ext/master/e1000e/rpext-index.json [#] Platforms supported: ds1621p_42218 ds3617xs_25556u2 ds918p_41890 ds3617xs_42218 ds3615xs_25556u2 ds3617xs_25556 ds918p_25556 dva3221_42218 ds3622xsp_42218 ds3615xs_41222 ds3617xs_42218u2 ds3622xsp_42550 ds3615xs_25556 ds918p_42218 ds3615xs_42218 [#] ======================================================================================= Found Ethernet Interface : pciid 8086d00000d4d Required Extension : e1000e Searching for matching extension for e1000e Found matching extension : "https://raw.githubusercontent.com/pocopico/rp-ext/master/e1000e/rpext-index.json" Found VGA Controller : pciid 10ded00000f00 Required Extension : No matching extension Found Ethernet Interface : pciid 10ecd00008125 Required Extension : No matching extension ------------------------------------------------------------------------------------------------ Starting loader creation Checking user_config.json : Done Cache directory OK [#] Checking runtime for required tools... [OK] [#] Updating extensions... [#] Checking runtime for required tools... [OK] [#] Adding new extension from https://raw.githubusercontent.com/dogodefi/redpill-ext/master/redpill-boot-wait/rpext-index.json... [#] Downloading remote file https://raw.githubusercontent.com/dogodefi/redpill-ext/master/redpill-boot-wait/rpext-index.json to /home/tc/redpill-load/custom/extensions/_new_ext_index.tmp_json ##################################################################################################################################################### 100.0% [OK] [#] ========================================== thethorgroup.jg.boot-wait ========================================== [#] Extension name: RedPill Bootwait [#] Description: Simple extension which stops the execution early waiting for the boot device to appear [#] To get help visit: https://github.com/RedPill-TTG/redpill-boot-wait [#] Extension preparer/packer: https://github.com/RedPill-TTG/redpill-boot-wait [#] Update URL: https://raw.githubusercontent.com/dogodefi/redpill-ext/master/redpill-boot-wait/rpext-index.json [#] Platforms supported: ds3617xs_25556u2 ds918p_41890 ds3617xs_42218 fs6400_42218 ds3615xs_25556u2 ds3617xs_42550 ds3617xs_25556 ds918p_25556 dva3221_42218 ds3622xsp_42218 ds3615xs_41222 rs4021xsp_42218 ds3617xs_42218u2 ds3622xsp_42550 ds3615xs_25556 ds918p_42218 ds918p_25556u2 ds3615xs_42218 [#] ======================================================================================= [#] Checking runtime for required tools... [OK] [#] Updating jumkey.acpid2 extension... [#] Downloading remote file https://github.com/jumkey/redpill-load/raw/develop/redpill-acpid/rpext-index.json to /home/tc/redpill-load/custom/extensions/_new_ext_index.tmp_json ##################################################################################################################################################### 100.0%##################################################################################################################################################### 100.0% [#] Updating pocopico.e1000e extension... [#] Downloading remote file https://raw.githubusercontent.com/pocopico/rp-ext/master/e1000e/rpext-index.json to /home/tc/redpill-load/custom/extensions/_new_ext_index.tmp_json ##################################################################################################################################################### 100.0% [#] Extension pocopico.e1000e index is already up to date [#] Updating pocopico.r8125 extension... [#] Downloading remote file https://raw.githubusercontent.com/pocopico/rp-ext/master/r8125/rpext-index.json to /home/tc/redpill-load/custom/extensions/_new_ext_index.tmp_json ##################################################################################################################################################### 100.0% [#] Extension pocopico.r8125 index is already up to date [#] Updating pocopico.tcrp-diag extension... [#] Downloading remote file https://github.com/pocopico/rp-ext/raw/main/tcrp-diag/rpext-index.json to /home/tc/redpill-load/custom/extensions/_new_ext_index.tmp_json ##################################################################################################################################################### 100.0%##################################################################################################################################################### 100.0% [#] Extension pocopico.tcrp-diag index is already up to date [#] Updating thethorgroup.jg.boot-wait extension... [#] Downloading remote file https://raw.githubusercontent.com/dogodefi/redpill-ext/master/redpill-boot-wait/rpext-index.json to /home/tc/redpill-load/custom/extensions/_new_ext_index.tmp_json ##################################################################################################################################################### 100.0% [#] Extension thethorgroup.jg.boot-wait index is already up to date [#] Updating thethorgroup.jg.boot-wait extension... [OK] [#] Checking runtime for required tools... [OK] [#] Updating ds3622xsp_42218 platforms extensions... [#] Downloading remote file https://github.com/jumkey/redpill-load/raw/develop/redpill-acpid/recipes/universal.json to /home/tc/redpill-load/custom/extensions/_ext_new_rcp.tmp_json ##################################################################################################################################################### 100.0%##################################################################################################################################################### 100.0% [#] Filling-in newly downloaded recipe for extension jumkey.acpid2 platform ds3622xsp_42218 [#] Downloading remote file https://github.com/jumkey/redpill-load/raw/develop/redpill-acpid/src/install-acpid.sh to /home/tc/redpill-load/custom/extensions/jumkey.acpid2/ds3622xsp_42218/install-acpid.sh ##################################################################################################################################################### 100.0%##################################################################################################################################################### 100.0% [#] Verifying /home/tc/redpill-load/custom/extensions/jumkey.acpid2/ds3622xsp_42218/install-acpid.sh file... [OK] [#] Downloading remote file https://github.com/jumkey/redpill-load/raw/develop/redpill-acpid/acpid.tar.gz to /home/tc/redpill-load/custom/extensions/jumkey.acpid2/ds3622xsp_42218/acpid.tar.gz ##################################################################################################################################################### 100.0%##################################################################################################################################################### 100.0% [#] Verifying /home/tc/redpill-load/custom/extensions/jumkey.acpid2/ds3622xsp_42218/acpid.tar.gz file... [OK] [#] Successfully processed recipe for extension jumkey.acpid2 platform ds3622xsp_42218 [#] Downloading remote file https://raw.githubusercontent.com/pocopico/rp-ext/master/e1000e/releases/ds3622xsp_42218.json to /home/tc/redpill-load/custom/extensions/_ext_new_rcp.tmp_json ##################################################################################################################################################### 100.0% [#] Filling-in newly downloaded recipe for extension pocopico.e1000e platform ds3622xsp_42218 [#] Downloading remote file https://raw.githubusercontent.com/pocopico/rp-ext/master/e1000e/releases/e1000e-4.4.180plus-broadwellnk.tgz to /home/tc/redpill-load/custom/extensions/pocopico.e1000e/ds3622xsp_42218/e1000e-4.4.180plus-broadwellnk.tgz ##################################################################################################################################################### 100.0% [#] Verifying /home/tc/redpill-load/custom/extensions/pocopico.e1000e/ds3622xsp_42218/e1000e-4.4.180plus-broadwellnk.tgz file... [OK] [#] Unpacking files from /home/tc/redpill-load/custom/extensions/pocopico.e1000e/ds3622xsp_42218/e1000e-4.4.180plus-broadwellnk.tgz to /home/tc/redpill-load/custom/extensions/pocopico.e1000e/ds3622xsp_42218/... [OK] [#] Downloading remote file https://raw.githubusercontent.com/pocopico/rp-ext/master/e1000e/src/check-e1000e.sh to /home/tc/redpill-load/custom/extensions/pocopico.e1000e/ds3622xsp_42218/check-e1000e.sh ##################################################################################################################################################### 100.0% [#] Verifying /home/tc/redpill-load/custom/extensions/pocopico.e1000e/ds3622xsp_42218/check-e1000e.sh file... [OK] [#] Successfully processed recipe for extension pocopico.e1000e platform ds3622xsp_42218 [#] Downloading remote file https://raw.githubusercontent.com/pocopico/rp-ext/master/r8125/releases/ds3622xsp_42218.json to /home/tc/redpill-load/custom/extensions/_ext_new_rcp.tmp_json ##################################################################################################################################################### 100.0% [#] Filling-in newly downloaded recipe for extension pocopico.r8125 platform ds3622xsp_42218 [#] Downloading remote file https://raw.githubusercontent.com/pocopico/rp-ext/master/r8125/releases/r8125-4.4.180plus-broadwellnk.tgz to /home/tc/redpill-load/custom/extensions/pocopico.r8125/ds3622xsp_42218/r8125-4.4.180plus-broadwellnk.tgz ##################################################################################################################################################### 100.0% [#] Verifying /home/tc/redpill-load/custom/extensions/pocopico.r8125/ds3622xsp_42218/r8125-4.4.180plus-broadwellnk.tgz file... [OK] [#] Unpacking files from /home/tc/redpill-load/custom/extensions/pocopico.r8125/ds3622xsp_42218/r8125-4.4.180plus-broadwellnk.tgz to /home/tc/redpill-load/custom/extensions/pocopico.r8125/ds3622xsp_42218/... [OK] [#] Downloading remote file https://raw.githubusercontent.com/pocopico/rp-ext/master/r8125/src/check-r8125.sh to /home/tc/redpill-load/custom/extensions/pocopico.r8125/ds3622xsp_42218/check-r8125.sh ##################################################################################################################################################### 100.0% [#] Verifying /home/tc/redpill-load/custom/extensions/pocopico.r8125/ds3622xsp_42218/check-r8125.sh file... [OK] [#] Successfully processed recipe for extension pocopico.r8125 platform ds3622xsp_42218 [#] Downloading remote file https://raw.githubusercontent.com/pocopico/rp-ext/master/tcrp-diag/releases/universal.json to /home/tc/redpill-load/custom/extensions/_ext_new_rcp.tmp_json ##################################################################################################################################################### 100.0% [#] Filling-in newly downloaded recipe for extension pocopico.tcrp-diag platform ds3622xsp_42218 [#] Downloading remote file https://github.com/pocopico/rp-ext/raw/main/tcrp-diag/src/tcrp-diag.sh to /home/tc/redpill-load/custom/extensions/pocopico.tcrp-diag/ds3622xsp_42218/tcrp-diag.sh ##################################################################################################################################################### 100.0%##################################################################################################################################################### 100.0% [#] Verifying /home/tc/redpill-load/custom/extensions/pocopico.tcrp-diag/ds3622xsp_42218/tcrp-diag.sh file... [OK] [#] Downloading remote file https://github.com/pocopico/rp-ext/raw/main/tcrp-diag/src/tcrp-diagd.sh to /home/tc/redpill-load/custom/extensions/pocopico.tcrp-diag/ds3622xsp_42218/tcrp-diagd.sh ##################################################################################################################################################### 100.0%##################################################################################################################################################### 100.0% [#] Verifying /home/tc/redpill-load/custom/extensions/pocopico.tcrp-diag/ds3622xsp_42218/tcrp-diagd.sh file... [OK] [#] Downloading remote file https://github.com/pocopico/rp-ext/raw/main/tcrp-diag/auxfiles/dmidecode to /home/tc/redpill-load/custom/extensions/pocopico.tcrp-diag/ds3622xsp_42218/dmidecode ##################################################################################################################################################### 100.0%##################################################################################################################################################### 100.0% [#] Verifying /home/tc/redpill-load/custom/extensions/pocopico.tcrp-diag/ds3622xsp_42218/dmidecode file... [OK] [#] Downloading remote file https://github.com/pocopico/rp-ext/raw/main/tcrp-diag/auxfiles/lspci to /home/tc/redpill-load/custom/extensions/pocopico.tcrp-diag/ds3622xsp_42218/lspci ##################################################################################################################################################### 100.0%##################################################################################################################################################### 100.0% [#] Verifying /home/tc/redpill-load/custom/extensions/pocopico.tcrp-diag/ds3622xsp_42218/lspci file... [OK] [#] Downloading remote file https://github.com/pocopico/rp-ext/raw/main/tcrp-diag/auxfiles/libpci.so.3 to /home/tc/redpill-load/custom/extensions/pocopico.tcrp-diag/ds3622xsp_42218/libpci.so.3 ##################################################################################################################################################### 100.0%##################################################################################################################################################### 100.0% [#] Verifying /home/tc/redpill-load/custom/extensions/pocopico.tcrp-diag/ds3622xsp_42218/libpci.so.3 file... [OK] [#] Downloading remote file https://github.com/pocopico/rp-ext/raw/main/tcrp-diag/auxfiles/libz.so.1 to /home/tc/redpill-load/custom/extensions/pocopico.tcrp-diag/ds3622xsp_42218/libz.so.1 ##################################################################################################################################################### 100.0%##################################################################################################################################################### 100.0% [#] Verifying /home/tc/redpill-load/custom/extensions/pocopico.tcrp-diag/ds3622xsp_42218/libz.so.1 file... [OK] [#] Downloading remote file https://github.com/pocopico/rp-ext/raw/main/tcrp-diag/auxfiles/libudev.so.1 to /home/tc/redpill-load/custom/extensions/pocopico.tcrp-diag/ds3622xsp_42218/libudev.so.1 ##################################################################################################################################################### 100.0%##################################################################################################################################################### 100.0% [#] Verifying /home/tc/redpill-load/custom/extensions/pocopico.tcrp-diag/ds3622xsp_42218/libudev.so.1 file... [OK] [#] Downloading remote file https://github.com/pocopico/rp-ext/raw/main/tcrp-diag/auxfiles/libkmod.so.2 to /home/tc/redpill-load/custom/extensions/pocopico.tcrp-diag/ds3622xsp_42218/libkmod.so.2 ##################################################################################################################################################### 100.0%##################################################################################################################################################### 100.0% [#] Verifying /home/tc/redpill-load/custom/extensions/pocopico.tcrp-diag/ds3622xsp_42218/libkmod.so.2 file... [OK] [#] Downloading remote file https://github.com/pocopico/rp-ext/raw/main/tcrp-diag/auxfiles/libresolv.so.2 to /home/tc/redpill-load/custom/extensions/pocopico.tcrp-diag/ds3622xsp_42218/libresolv.so.2 ##################################################################################################################################################### 100.0%##################################################################################################################################################### 100.0% [#] Verifying /home/tc/redpill-load/custom/extensions/pocopico.tcrp-diag/ds3622xsp_42218/libresolv.so.2 file... [OK] [#] Downloading remote file https://github.com/pocopico/rp-ext/raw/main/tcrp-diag/auxfiles/lsscsi to /home/tc/redpill-load/custom/extensions/pocopico.tcrp-diag/ds3622xsp_42218/lsscsi ##################################################################################################################################################### 100.0%##################################################################################################################################################### 100.0% [#] Verifying /home/tc/redpill-load/custom/extensions/pocopico.tcrp-diag/ds3622xsp_42218/lsscsi file... [OK] [#] Downloading remote file https://github.com/pocopico/rp-ext/raw/main/tcrp-diag/auxfiles/dtc to /home/tc/redpill-load/custom/extensions/pocopico.tcrp-diag/ds3622xsp_42218/dtc ##################################################################################################################################################### 100.0%##################################################################################################################################################### 100.0% [#] Verifying /home/tc/redpill-load/custom/extensions/pocopico.tcrp-diag/ds3622xsp_42218/dtc file... [OK] [#] Downloading remote file https://github.com/pocopico/rp-ext/raw/main/tcrp-diag/auxfiles/lsusb to /home/tc/redpill-load/custom/extensions/pocopico.tcrp-diag/ds3622xsp_42218/lsusb ##################################################################################################################################################### 100.0%##################################################################################################################################################### 100.0% [#] Verifying /home/tc/redpill-load/custom/extensions/pocopico.tcrp-diag/ds3622xsp_42218/lsusb file... [OK] [#] Downloading remote file https://github.com/pocopico/rp-ext/raw/main/tcrp-diag/auxfiles/usb.ids to /home/tc/redpill-load/custom/extensions/pocopico.tcrp-diag/ds3622xsp_42218/usb.ids ##################################################################################################################################################### 100.0%##################################################################################################################################################### 100.0% [#] Verifying /home/tc/redpill-load/custom/extensions/pocopico.tcrp-diag/ds3622xsp_42218/usb.ids file... [OK] [#] Downloading remote file https://github.com/pocopico/rp-ext/raw/main/tcrp-diag/auxfiles/libusb-1.0.so.0 to /home/tc/redpill-load/custom/extensions/pocopico.tcrp-diag/ds3622xsp_42218/libusb-1.0.so.0 ##################################################################################################################################################### 100.0%##################################################################################################################################################### 100.0% [#] Verifying /home/tc/redpill-load/custom/extensions/pocopico.tcrp-diag/ds3622xsp_42218/libusb-1.0.so.0 file... [OK] [#] Successfully processed recipe for extension pocopico.tcrp-diag platform ds3622xsp_42218 [#] Downloading remote file https://github.com/jimmyGALLAND/redpill-ext/raw/master/redpill-boot-wait/recipes/universal.json to /home/tc/redpill-load/custom/extensions/_ext_new_rcp.tmp_json ##################################################################################################################################################### 100.0%##################################################################################################################################################### 100.0% [#] Filling-in newly downloaded recipe for extension thethorgroup.jg.boot-wait platform ds3622xsp_42218 [#] Downloading remote file https://raw.githubusercontent.com/jimmyGALLAND/redpill-ext/master/redpill-boot-wait/src/boot-wait.sh to /home/tc/redpill-load/custom/extensions/thethorgroup.jg.boot-wait/ds3622xsp_42218/boot-wait.sh ##################################################################################################################################################### 100.0% [#] Verifying /home/tc/redpill-load/custom/extensions/thethorgroup.jg.boot-wait/ds3622xsp_42218/boot-wait.sh file... [OK] [#] Successfully processed recipe for extension thethorgroup.jg.boot-wait platform ds3622xsp_42218 [#] Verifying /home/tc/redpill-load/custom/extensions/thethorgroup.jg.boot-wait/ds3622xsp_42218/boot-wait.sh file... [OK] [#] Updating extensions... [OK] [#] PAT file /home/tc/redpill-load/cache/ds3622xsp_42218.pat not found - downloading from https://cndl.synology.cn/download/DSM/release/7.0.1/42218/DSM_DS3622xs+_42218.pat % Total % Received % Xferd Average Speed Time Time Time Current Dload Upload Total Spent Left Speed 100 345M 100 345M 0 0 1460k 0 0:04:01 0:04:01 --:--:-- 2094k [#] Verifying /home/tc/redpill-load/cache/ds3622xsp_42218.pat file... [OK] [#] Unpacking /home/tc/redpill-load/cache/ds3622xsp_42218.pat file to /home/tc/redpill-load/build/1648154287/pat-ds3622xsp_42218-unpacked... [OK] [#] Verifying /home/tc/redpill-load/build/1648154287/pat-ds3622xsp_42218-unpacked/zImage file... [OK] [#] Patching /home/tc/redpill-load/build/1648154287/pat-ds3622xsp_42218-unpacked/zImage to /home/tc/redpill-load/build/1648154287/zImage-patched... [OK] [#] Verifying /home/tc/redpill-load/build/1648154287/pat-ds3622xsp_42218-unpacked/rd.gz file... [OK] [#] Unpacking /home/tc/redpill-load/build/1648154287/pat-ds3622xsp_42218-unpacked/rd.gz file to /home/tc/redpill-load/build/1648154287/rd-ds3622xsp_42218-unpacked... [OK] [#] Apply patches to /home/tc/redpill-load/build/1648154287/rd-ds3622xsp_42218-unpacked... [OK] [#] Patching config files in ramdisk... [OK] [#] Adding OS config patching... [OK] [#] Repacking ramdisk to /home/tc/redpill-load/build/1648154287/rd-patched-ds3622xsp_42218.gz... [OK] [#] Bundling extensions... [#] Checking runtime for required tools... [OK] [#] Dumping ds3622xsp_42218 platform extensions to /home/tc/redpill-load/build/1648154287/custom-initrd/exts... [OK] [#] Packing custom ramdisk layer to /home/tc/redpill-load/build/1648154287/custom.gz... [OK] [#] Generating GRUB config... [OK] [#] Creating loader image at loader.img... [OK] [#] Cleaning up... [OK] Mounting /dev/sdb1 to localdiskp1 /dev/sdb2 localdiskp2 Creating tinycore entry menuentry 'Tiny Core Image Build' { savedefault set root=(hd0,msdos3) echo Loading Linux... linux /vmlinuz64 loglevel=3 cde waitusb=5 vga=791 echo Loading initramfs... initrd /corepure64.gz echo Booting TinyCore for loader creation } Entries in Localdisk bootloader : ======================================================================= menuentry 'RedPill DS3622xs v7.0.1-42218 Beta (USB, Verbose)' { menuentry 'RedPill DS3622xs v7.0.1-42218 Beta (SATA, Verbose)' { menuentry 'Tiny Core Image Build' { After A while the network card gets an ip but If I go to the webpage of ip I get connection refused and I cannot proceed to DSM installation What have I done wrong? my lsscsi -Hvt is root@box:/home/tc# lsscsi -Hvt [0] ahci sata: dir: /sys/class/scsi_host//host0 device dir: /sys/devices/pci0000:00/0000:00:17.0/ata1/host0 [1] ahci sata: dir: /sys/class/scsi_host//host1 device dir: /sys/devices/pci0000:00/0000:00:17.0/ata2/host1 [2] ahci sata: dir: /sys/class/scsi_host//host2 device dir: /sys/devices/pci0000:00/0000:00:17.0/ata3/host2 [3] ahci sata: dir: /sys/class/scsi_host//host3 device dir: /sys/devices/pci0000:00/0000:00:17.0/ata4/host3 [4] ahci sata: dir: /sys/class/scsi_host//host4 device dir: /sys/devices/pci0000:00/0000:00:17.0/ata5/host4 [5] ahci sata: dir: /sys/class/scsi_host//host5 device dir: /sys/devices/pci0000:00/0000:00:17.0/ata6/host5 [6] usb-storage usb:1-2:1.0 dir: /sys/class/scsi_host//host6 device dir: /sys/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0/host6 and my lsscsi -vt root@box:/home/tc# lsscsi -vt [0:0:0:0] disk sata:50014ee658907201 /dev/sda dir: /sys/bus/scsi/devices/0:0:0:0 [/sys/devices/pci0000:00/0000:00:17.0/ata1/host0/target0:0:0/0:0:0:0] [6:0:0:0] disk usb:1-2:1.0 /dev/sdb dir: /sys/bus/scsi/devices/6:0:0:0 [/sys/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0/host6/target6:0:0/6:0:0:0] Thanks Edited March 24, 2022 by ditheo Quote Link to comment Share on other sites More sharing options...
pocopico Posted March 24, 2022 Author Share #1616 Posted March 24, 2022 24 minutes ago, ditheo said: Hi , I am trying to build a new machine on this hardware: Intel i3-10100F Msi mag460 tomahawk (6 sata , 2 m.2) 16Gb Ram Nvidia GT630 my lspci -nnQ is root@box:/home/tc# lspci -nnq 00:00.0 Host bridge [0600]: Intel Corporation 10th Gen Core Processor Host Bridge/DRAM Registers [8086:9b63] (rev 03) 00:01.0 PCI bridge [0604]: Intel Corporation Skylake PCIe Controller (x16) [8086:1901] (rev 03) 00:08.0 System peripheral [0880]: Intel Corporation Skylake Gaussian Mixture Model [8086:1911] 00:14.0 USB controller [0c03]: Intel Corporation Comet Lake PCH-V USB Controller [8086:a3af] 00:14.2 Signal processing controller [1180]: Intel Corporation Comet Lake PCH-V Thermal Subsystem [8086:a3b1] 00:16.0 Communication controller [0780]: Intel Corporation Comet Lake PCH-V HECI Controller [8086:a3ba] 00:17.0 SATA controller [0106]: Intel Corporation 400 Series Chipset Family SATA AHCI Controller [8086:a382] 00:1b.0 PCI bridge [0604]: Intel Corporation Device [8086:a3e9] (rev f0) 00:1c.0 PCI bridge [0604]: Intel Corporation Device [8086:a392] (rev f0) 00:1c.6 PCI bridge [0604]: Intel Corporation Device [8086:a396] (rev f0) 00:1f.0 ISA bridge [0601]: Intel Corporation B460 Chipset LPC/eSPI Controller [8086:a3c8] 00:1f.2 Memory controller [0580]: Intel Corporation Cannon Lake PCH Power Management Controller [8086:a3a1] 00:1f.4 SMBus [0c05]: Intel Corporation Comet Lake PCH-V SMBus Host Controller [8086:a3a3] 00:1f.6 Ethernet controller [0200]: Intel Corporation Ethernet Connection (11) I219-V [8086:0d4d] 01:00.0 VGA compatible controller [0300]: NVIDIA Corporation GF108 [GeForce GT 630] [10de:0f00] (rev a1) 01:00.1 Audio device [0403]: NVIDIA Corporation GF108 High Definition Audio Controller [10de:0bea] (rev a1) 02:00.0 USB controller [0c03]: ASMedia Technology Inc. Device [1b21:3241] 03:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8125 2.5GbE Controller [10ec:8125] (rev 04) 04:00.0 Serial controller [0700]: MosChip Semiconductor Technology Ltd. PCIe 9901 Multi-I/O Controller [9710:9901] 04:00.1 Serial controller [0700]: MosChip Semiconductor Technology Ltd. PCIe 9901 Multi-I/O Controller [9710:9901] 04:00.2 Serial controller [0700]: MosChip Semiconductor Technology Ltd. PCIe 9901 Multi-I/O Controller [9710:9901] 04:00.3 Serial controller [0700]: MosChip Semiconductor Technology Ltd. PCIe 9901 Multi-I/O Controller [9710:9901] I add three extra modules r8125 (for my realtek 8125 10ec:8125) redpill-acpid tcrp-diag My user.json is { "extra_cmdline": { "pid": "0x6387", "vid": "0x058f", "sn": "20C0SQRVM83GH", "mac1": "0011321E8F1C", "mac2": "0011321E8F1D", "SataPortMap": "611", "DiskIdxMap": "0000" }, "synoinfo": { "internalportcfg" : "0xffff", "maxdisks" : "16", "support_bde_internal_10g" : "no", "support_disk_compatibility" : "no", "support_memory_compatibility" : "no" }, "ramdisk_copy": { } } and my log for the build is root@box:/home/tc# ./rploader.sh build broadwellnk-7.0.1-42218 jq: error (at <stdin>:1): Cannot iterate over null (null) jq: error (at <stdin>:1): Cannot iterate over null (null) Loader source : https://github.com/dogodefi/redpill-load.git Loader Branch : develop Redpill module source : https://github.com/dogodefi/redpill-lkm.git : Redpill module branch : develop Extensions : Extensions URL : TOOLKIT_URL : https://sourceforge.net/projects/dsgpl/files/toolkit/DSM7.0/ds.broadwellnk-7.0.dev.txz/download TOOLKIT_SHA : 0d9edca67d9e7e14c2529bbb58341b623936124d5264f71f1e4acbacf3ea202d SYNOKERNEL_URL : https://sourceforge.net/projects/dsgpl/files/Synology%20NAS%20GPL%20Source/25426branch/broadwellnk-source/linux-4.4.x.txz/download SYNOKERNEL_SHA : d3e85eb80f16a83244fcae6016ab6783cd8ac55e3af2b4240455261396e1e1be COMPILE_METHOD : toolkit_dev TARGET_PLATFORM : broadwellnk TARGET_VERSION : 7.0.1 TARGET_REVISION : 42218 REDPILL_LKM_MAKE_TARGET : dev-v7 KERNEL_MAJOR : 4 MODULE_ALIAS_FILE= modules.alias.4.json Checking Internet Access -> OK Checking if a newer version exists on the repo -> Version is current Redpill sources already downloaded, pulling latest Already up to date. Loader sources already downloaded, pulling latest Already up to date. No extra build option specified, using default <static> Using static compiled redpill extension Looking for redpill for : ds3622xsp_42218 Getting file https://raw.githubusercontent.com/pocopico/rp-ext/master/redpill/releases/redpill-4.4.180plus-broadwellnk.tgz Extracting module Getting file https://raw.githubusercontent.com/pocopico/rp-ext/master/redpill/src/check-redpill.sh Got redpill-linux-v4.4.180+.ko Testing modules.alias.4.json -> File OK ------------------------------------------------------------------------------------------------ It looks that you will need the following modules : Found SATA Controller : pciid 8086d0000a382 Required Extension : No matching extension [#] Checking runtime for required tools... [OK] [#] Adding new extension from https://raw.githubusercontent.com/pocopico/rp-ext/master/e1000e/rpext-index.json... [#] Downloading remote file https://raw.githubusercontent.com/pocopico/rp-ext/master/e1000e/rpext-index.json to /home/tc/redpill-load/custom/extensions/_new_ext_index.tmp_json ######################################################################## 100.0% [OK] [#] ========================================== pocopico.e1000e ========================================== [#] Extension name: e1000e [#] Description: Adds Intel(R) PRO/1000 Network Driver Support [#] To get help visit: <todo> [#] Extension preparer/packer: https://github.com/pocopico/rp-ext/tree/main/e1000e [#] Software author: https://github.com/pocopico [#] Update URL: https://raw.githubusercontent.com/pocopico/rp-ext/master/e1000e/rpext-index.json [#] Platforms supported: ds1621p_42218 ds3617xs_25556u2 ds918p_41890 ds3617xs_42218 ds3615xs_25556u2 ds3617xs_25556 ds918p_25556 dva3221_42218 ds3622xsp_42218 ds3615xs_41222 ds3617xs_42218u2 ds3622xsp_42550 ds3615xs_25556 ds918p_42218 ds3615xs_42218 [#] ======================================================================================= Found Ethernet Interface : pciid 8086d00000d4d Required Extension : e1000e Searching for matching extension for e1000e Found matching extension : "https://raw.githubusercontent.com/pocopico/rp-ext/master/e1000e/rpext-index.json" Found VGA Controller : pciid 10ded00000f00 Required Extension : No matching extension Found Ethernet Interface : pciid 10ecd00008125 Required Extension : No matching extension ------------------------------------------------------------------------------------------------ Starting loader creation Checking user_config.json : Done Cache directory OK [#] Checking runtime for required tools... [OK] [#] Updating extensions... [#] Checking runtime for required tools... [OK] [#] Adding new extension from https://raw.githubusercontent.com/dogodefi/redpill-ext/master/redpill-boot-wait/rpext-index.json... [#] Downloading remote file https://raw.githubusercontent.com/dogodefi/redpill-ext/master/redpill-boot-wait/rpext-index.json to /home/tc/redpill-load/custom/extensions/_new_ext_index.tmp_json ##################################################################################################################################################### 100.0% [OK] [#] ========================================== thethorgroup.jg.boot-wait ========================================== [#] Extension name: RedPill Bootwait [#] Description: Simple extension which stops the execution early waiting for the boot device to appear [#] To get help visit: https://github.com/RedPill-TTG/redpill-boot-wait [#] Extension preparer/packer: https://github.com/RedPill-TTG/redpill-boot-wait [#] Update URL: https://raw.githubusercontent.com/dogodefi/redpill-ext/master/redpill-boot-wait/rpext-index.json [#] Platforms supported: ds3617xs_25556u2 ds918p_41890 ds3617xs_42218 fs6400_42218 ds3615xs_25556u2 ds3617xs_42550 ds3617xs_25556 ds918p_25556 dva3221_42218 ds3622xsp_42218 ds3615xs_41222 rs4021xsp_42218 ds3617xs_42218u2 ds3622xsp_42550 ds3615xs_25556 ds918p_42218 ds918p_25556u2 ds3615xs_42218 [#] ======================================================================================= [#] Checking runtime for required tools... [OK] [#] Updating jumkey.acpid2 extension... [#] Downloading remote file https://github.com/jumkey/redpill-load/raw/develop/redpill-acpid/rpext-index.json to /home/tc/redpill-load/custom/extensions/_new_ext_index.tmp_json ##################################################################################################################################################### 100.0%##################################################################################################################################################### 100.0% [#] Updating pocopico.e1000e extension... [#] Downloading remote file https://raw.githubusercontent.com/pocopico/rp-ext/master/e1000e/rpext-index.json to /home/tc/redpill-load/custom/extensions/_new_ext_index.tmp_json ##################################################################################################################################################### 100.0% [#] Extension pocopico.e1000e index is already up to date [#] Updating pocopico.r8125 extension... [#] Downloading remote file https://raw.githubusercontent.com/pocopico/rp-ext/master/r8125/rpext-index.json to /home/tc/redpill-load/custom/extensions/_new_ext_index.tmp_json ##################################################################################################################################################### 100.0% [#] Extension pocopico.r8125 index is already up to date [#] Updating pocopico.tcrp-diag extension... [#] Downloading remote file https://github.com/pocopico/rp-ext/raw/main/tcrp-diag/rpext-index.json to /home/tc/redpill-load/custom/extensions/_new_ext_index.tmp_json ##################################################################################################################################################### 100.0%##################################################################################################################################################### 100.0% [#] Extension pocopico.tcrp-diag index is already up to date [#] Updating thethorgroup.jg.boot-wait extension... [#] Downloading remote file https://raw.githubusercontent.com/dogodefi/redpill-ext/master/redpill-boot-wait/rpext-index.json to /home/tc/redpill-load/custom/extensions/_new_ext_index.tmp_json ##################################################################################################################################################### 100.0% [#] Extension thethorgroup.jg.boot-wait index is already up to date [#] Updating thethorgroup.jg.boot-wait extension... [OK] [#] Checking runtime for required tools... [OK] [#] Updating ds3622xsp_42218 platforms extensions... [#] Downloading remote file https://github.com/jumkey/redpill-load/raw/develop/redpill-acpid/recipes/universal.json to /home/tc/redpill-load/custom/extensions/_ext_new_rcp.tmp_json ##################################################################################################################################################### 100.0%##################################################################################################################################################### 100.0% [#] Filling-in newly downloaded recipe for extension jumkey.acpid2 platform ds3622xsp_42218 [#] Downloading remote file https://github.com/jumkey/redpill-load/raw/develop/redpill-acpid/src/install-acpid.sh to /home/tc/redpill-load/custom/extensions/jumkey.acpid2/ds3622xsp_42218/install-acpid.sh ##################################################################################################################################################### 100.0%##################################################################################################################################################### 100.0% [#] Verifying /home/tc/redpill-load/custom/extensions/jumkey.acpid2/ds3622xsp_42218/install-acpid.sh file... [OK] [#] Downloading remote file https://github.com/jumkey/redpill-load/raw/develop/redpill-acpid/acpid.tar.gz to /home/tc/redpill-load/custom/extensions/jumkey.acpid2/ds3622xsp_42218/acpid.tar.gz ##################################################################################################################################################### 100.0%##################################################################################################################################################### 100.0% [#] Verifying /home/tc/redpill-load/custom/extensions/jumkey.acpid2/ds3622xsp_42218/acpid.tar.gz file... [OK] [#] Successfully processed recipe for extension jumkey.acpid2 platform ds3622xsp_42218 [#] Downloading remote file https://raw.githubusercontent.com/pocopico/rp-ext/master/e1000e/releases/ds3622xsp_42218.json to /home/tc/redpill-load/custom/extensions/_ext_new_rcp.tmp_json ##################################################################################################################################################### 100.0% [#] Filling-in newly downloaded recipe for extension pocopico.e1000e platform ds3622xsp_42218 [#] Downloading remote file https://raw.githubusercontent.com/pocopico/rp-ext/master/e1000e/releases/e1000e-4.4.180plus-broadwellnk.tgz to /home/tc/redpill-load/custom/extensions/pocopico.e1000e/ds3622xsp_42218/e1000e-4.4.180plus-broadwellnk.tgz ##################################################################################################################################################### 100.0% [#] Verifying /home/tc/redpill-load/custom/extensions/pocopico.e1000e/ds3622xsp_42218/e1000e-4.4.180plus-broadwellnk.tgz file... [OK] [#] Unpacking files from /home/tc/redpill-load/custom/extensions/pocopico.e1000e/ds3622xsp_42218/e1000e-4.4.180plus-broadwellnk.tgz to /home/tc/redpill-load/custom/extensions/pocopico.e1000e/ds3622xsp_42218/... [OK] [#] Downloading remote file https://raw.githubusercontent.com/pocopico/rp-ext/master/e1000e/src/check-e1000e.sh to /home/tc/redpill-load/custom/extensions/pocopico.e1000e/ds3622xsp_42218/check-e1000e.sh ##################################################################################################################################################### 100.0% [#] Verifying /home/tc/redpill-load/custom/extensions/pocopico.e1000e/ds3622xsp_42218/check-e1000e.sh file... [OK] [#] Successfully processed recipe for extension pocopico.e1000e platform ds3622xsp_42218 [#] Downloading remote file https://raw.githubusercontent.com/pocopico/rp-ext/master/r8125/releases/ds3622xsp_42218.json to /home/tc/redpill-load/custom/extensions/_ext_new_rcp.tmp_json ##################################################################################################################################################### 100.0% [#] Filling-in newly downloaded recipe for extension pocopico.r8125 platform ds3622xsp_42218 [#] Downloading remote file https://raw.githubusercontent.com/pocopico/rp-ext/master/r8125/releases/r8125-4.4.180plus-broadwellnk.tgz to /home/tc/redpill-load/custom/extensions/pocopico.r8125/ds3622xsp_42218/r8125-4.4.180plus-broadwellnk.tgz ##################################################################################################################################################### 100.0% [#] Verifying /home/tc/redpill-load/custom/extensions/pocopico.r8125/ds3622xsp_42218/r8125-4.4.180plus-broadwellnk.tgz file... [OK] [#] Unpacking files from /home/tc/redpill-load/custom/extensions/pocopico.r8125/ds3622xsp_42218/r8125-4.4.180plus-broadwellnk.tgz to /home/tc/redpill-load/custom/extensions/pocopico.r8125/ds3622xsp_42218/... [OK] [#] Downloading remote file https://raw.githubusercontent.com/pocopico/rp-ext/master/r8125/src/check-r8125.sh to /home/tc/redpill-load/custom/extensions/pocopico.r8125/ds3622xsp_42218/check-r8125.sh ##################################################################################################################################################### 100.0% [#] Verifying /home/tc/redpill-load/custom/extensions/pocopico.r8125/ds3622xsp_42218/check-r8125.sh file... [OK] [#] Successfully processed recipe for extension pocopico.r8125 platform ds3622xsp_42218 [#] Downloading remote file https://raw.githubusercontent.com/pocopico/rp-ext/master/tcrp-diag/releases/universal.json to /home/tc/redpill-load/custom/extensions/_ext_new_rcp.tmp_json ##################################################################################################################################################### 100.0% [#] Filling-in newly downloaded recipe for extension pocopico.tcrp-diag platform ds3622xsp_42218 [#] Downloading remote file https://github.com/pocopico/rp-ext/raw/main/tcrp-diag/src/tcrp-diag.sh to /home/tc/redpill-load/custom/extensions/pocopico.tcrp-diag/ds3622xsp_42218/tcrp-diag.sh ##################################################################################################################################################### 100.0%##################################################################################################################################################### 100.0% [#] Verifying /home/tc/redpill-load/custom/extensions/pocopico.tcrp-diag/ds3622xsp_42218/tcrp-diag.sh file... [OK] [#] Downloading remote file https://github.com/pocopico/rp-ext/raw/main/tcrp-diag/src/tcrp-diagd.sh to /home/tc/redpill-load/custom/extensions/pocopico.tcrp-diag/ds3622xsp_42218/tcrp-diagd.sh ##################################################################################################################################################### 100.0%##################################################################################################################################################### 100.0% [#] Verifying /home/tc/redpill-load/custom/extensions/pocopico.tcrp-diag/ds3622xsp_42218/tcrp-diagd.sh file... [OK] [#] Downloading remote file https://github.com/pocopico/rp-ext/raw/main/tcrp-diag/auxfiles/dmidecode to /home/tc/redpill-load/custom/extensions/pocopico.tcrp-diag/ds3622xsp_42218/dmidecode ##################################################################################################################################################### 100.0%##################################################################################################################################################### 100.0% [#] Verifying /home/tc/redpill-load/custom/extensions/pocopico.tcrp-diag/ds3622xsp_42218/dmidecode file... [OK] [#] Downloading remote file https://github.com/pocopico/rp-ext/raw/main/tcrp-diag/auxfiles/lspci to /home/tc/redpill-load/custom/extensions/pocopico.tcrp-diag/ds3622xsp_42218/lspci ##################################################################################################################################################### 100.0%##################################################################################################################################################### 100.0% [#] Verifying /home/tc/redpill-load/custom/extensions/pocopico.tcrp-diag/ds3622xsp_42218/lspci file... [OK] [#] Downloading remote file https://github.com/pocopico/rp-ext/raw/main/tcrp-diag/auxfiles/libpci.so.3 to /home/tc/redpill-load/custom/extensions/pocopico.tcrp-diag/ds3622xsp_42218/libpci.so.3 ##################################################################################################################################################### 100.0%##################################################################################################################################################### 100.0% [#] Verifying /home/tc/redpill-load/custom/extensions/pocopico.tcrp-diag/ds3622xsp_42218/libpci.so.3 file... [OK] [#] Downloading remote file https://github.com/pocopico/rp-ext/raw/main/tcrp-diag/auxfiles/libz.so.1 to /home/tc/redpill-load/custom/extensions/pocopico.tcrp-diag/ds3622xsp_42218/libz.so.1 ##################################################################################################################################################### 100.0%##################################################################################################################################################### 100.0% [#] Verifying /home/tc/redpill-load/custom/extensions/pocopico.tcrp-diag/ds3622xsp_42218/libz.so.1 file... [OK] [#] Downloading remote file https://github.com/pocopico/rp-ext/raw/main/tcrp-diag/auxfiles/libudev.so.1 to /home/tc/redpill-load/custom/extensions/pocopico.tcrp-diag/ds3622xsp_42218/libudev.so.1 ##################################################################################################################################################### 100.0%##################################################################################################################################################### 100.0% [#] Verifying /home/tc/redpill-load/custom/extensions/pocopico.tcrp-diag/ds3622xsp_42218/libudev.so.1 file... [OK] [#] Downloading remote file https://github.com/pocopico/rp-ext/raw/main/tcrp-diag/auxfiles/libkmod.so.2 to /home/tc/redpill-load/custom/extensions/pocopico.tcrp-diag/ds3622xsp_42218/libkmod.so.2 ##################################################################################################################################################### 100.0%##################################################################################################################################################### 100.0% [#] Verifying /home/tc/redpill-load/custom/extensions/pocopico.tcrp-diag/ds3622xsp_42218/libkmod.so.2 file... [OK] [#] Downloading remote file https://github.com/pocopico/rp-ext/raw/main/tcrp-diag/auxfiles/libresolv.so.2 to /home/tc/redpill-load/custom/extensions/pocopico.tcrp-diag/ds3622xsp_42218/libresolv.so.2 ##################################################################################################################################################### 100.0%##################################################################################################################################################### 100.0% [#] Verifying /home/tc/redpill-load/custom/extensions/pocopico.tcrp-diag/ds3622xsp_42218/libresolv.so.2 file... [OK] [#] Downloading remote file https://github.com/pocopico/rp-ext/raw/main/tcrp-diag/auxfiles/lsscsi to /home/tc/redpill-load/custom/extensions/pocopico.tcrp-diag/ds3622xsp_42218/lsscsi ##################################################################################################################################################### 100.0%##################################################################################################################################################### 100.0% [#] Verifying /home/tc/redpill-load/custom/extensions/pocopico.tcrp-diag/ds3622xsp_42218/lsscsi file... [OK] [#] Downloading remote file https://github.com/pocopico/rp-ext/raw/main/tcrp-diag/auxfiles/dtc to /home/tc/redpill-load/custom/extensions/pocopico.tcrp-diag/ds3622xsp_42218/dtc ##################################################################################################################################################### 100.0%##################################################################################################################################################### 100.0% [#] Verifying /home/tc/redpill-load/custom/extensions/pocopico.tcrp-diag/ds3622xsp_42218/dtc file... [OK] [#] Downloading remote file https://github.com/pocopico/rp-ext/raw/main/tcrp-diag/auxfiles/lsusb to /home/tc/redpill-load/custom/extensions/pocopico.tcrp-diag/ds3622xsp_42218/lsusb ##################################################################################################################################################### 100.0%##################################################################################################################################################### 100.0% [#] Verifying /home/tc/redpill-load/custom/extensions/pocopico.tcrp-diag/ds3622xsp_42218/lsusb file... [OK] [#] Downloading remote file https://github.com/pocopico/rp-ext/raw/main/tcrp-diag/auxfiles/usb.ids to /home/tc/redpill-load/custom/extensions/pocopico.tcrp-diag/ds3622xsp_42218/usb.ids ##################################################################################################################################################### 100.0%##################################################################################################################################################### 100.0% [#] Verifying /home/tc/redpill-load/custom/extensions/pocopico.tcrp-diag/ds3622xsp_42218/usb.ids file... [OK] [#] Downloading remote file https://github.com/pocopico/rp-ext/raw/main/tcrp-diag/auxfiles/libusb-1.0.so.0 to /home/tc/redpill-load/custom/extensions/pocopico.tcrp-diag/ds3622xsp_42218/libusb-1.0.so.0 ##################################################################################################################################################### 100.0%##################################################################################################################################################### 100.0% [#] Verifying /home/tc/redpill-load/custom/extensions/pocopico.tcrp-diag/ds3622xsp_42218/libusb-1.0.so.0 file... [OK] [#] Successfully processed recipe for extension pocopico.tcrp-diag platform ds3622xsp_42218 [#] Downloading remote file https://github.com/jimmyGALLAND/redpill-ext/raw/master/redpill-boot-wait/recipes/universal.json to /home/tc/redpill-load/custom/extensions/_ext_new_rcp.tmp_json ##################################################################################################################################################### 100.0%##################################################################################################################################################### 100.0% [#] Filling-in newly downloaded recipe for extension thethorgroup.jg.boot-wait platform ds3622xsp_42218 [#] Downloading remote file https://raw.githubusercontent.com/jimmyGALLAND/redpill-ext/master/redpill-boot-wait/src/boot-wait.sh to /home/tc/redpill-load/custom/extensions/thethorgroup.jg.boot-wait/ds3622xsp_42218/boot-wait.sh ##################################################################################################################################################### 100.0% [#] Verifying /home/tc/redpill-load/custom/extensions/thethorgroup.jg.boot-wait/ds3622xsp_42218/boot-wait.sh file... [OK] [#] Successfully processed recipe for extension thethorgroup.jg.boot-wait platform ds3622xsp_42218 [#] Verifying /home/tc/redpill-load/custom/extensions/thethorgroup.jg.boot-wait/ds3622xsp_42218/boot-wait.sh file... [OK] [#] Updating extensions... [OK] [#] PAT file /home/tc/redpill-load/cache/ds3622xsp_42218.pat not found - downloading from https://cndl.synology.cn/download/DSM/release/7.0.1/42218/DSM_DS3622xs+_42218.pat % Total % Received % Xferd Average Speed Time Time Time Current Dload Upload Total Spent Left Speed 100 345M 100 345M 0 0 1460k 0 0:04:01 0:04:01 --:--:-- 2094k [#] Verifying /home/tc/redpill-load/cache/ds3622xsp_42218.pat file... [OK] [#] Unpacking /home/tc/redpill-load/cache/ds3622xsp_42218.pat file to /home/tc/redpill-load/build/1648154287/pat-ds3622xsp_42218-unpacked... [OK] [#] Verifying /home/tc/redpill-load/build/1648154287/pat-ds3622xsp_42218-unpacked/zImage file... [OK] [#] Patching /home/tc/redpill-load/build/1648154287/pat-ds3622xsp_42218-unpacked/zImage to /home/tc/redpill-load/build/1648154287/zImage-patched... [OK] [#] Verifying /home/tc/redpill-load/build/1648154287/pat-ds3622xsp_42218-unpacked/rd.gz file... [OK] [#] Unpacking /home/tc/redpill-load/build/1648154287/pat-ds3622xsp_42218-unpacked/rd.gz file to /home/tc/redpill-load/build/1648154287/rd-ds3622xsp_42218-unpacked... [OK] [#] Apply patches to /home/tc/redpill-load/build/1648154287/rd-ds3622xsp_42218-unpacked... [OK] [#] Patching config files in ramdisk... [OK] [#] Adding OS config patching... [OK] [#] Repacking ramdisk to /home/tc/redpill-load/build/1648154287/rd-patched-ds3622xsp_42218.gz... [OK] [#] Bundling extensions... [#] Checking runtime for required tools... [OK] [#] Dumping ds3622xsp_42218 platform extensions to /home/tc/redpill-load/build/1648154287/custom-initrd/exts... [OK] [#] Packing custom ramdisk layer to /home/tc/redpill-load/build/1648154287/custom.gz... [OK] [#] Generating GRUB config... [OK] [#] Creating loader image at loader.img... [OK] [#] Cleaning up... [OK] Mounting /dev/sdb1 to localdiskp1 /dev/sdb2 localdiskp2 Creating tinycore entry menuentry 'Tiny Core Image Build' { savedefault set root=(hd0,msdos3) echo Loading Linux... linux /vmlinuz64 loglevel=3 cde waitusb=5 vga=791 echo Loading initramfs... initrd /corepure64.gz echo Booting TinyCore for loader creation } Entries in Localdisk bootloader : ======================================================================= menuentry 'RedPill DS3622xs v7.0.1-42218 Beta (USB, Verbose)' { menuentry 'RedPill DS3622xs v7.0.1-42218 Beta (SATA, Verbose)' { menuentry 'Tiny Core Image Build' { After A while the network card gets an ip but If I go to the webpage of ip I get connection refused and I cannot proceed to DSM installation What have I done wrong? my lsscsi -Hvt is root@box:/home/tc# lsscsi -Hvt [0] ahci sata: dir: /sys/class/scsi_host//host0 device dir: /sys/devices/pci0000:00/0000:00:17.0/ata1/host0 [1] ahci sata: dir: /sys/class/scsi_host//host1 device dir: /sys/devices/pci0000:00/0000:00:17.0/ata2/host1 [2] ahci sata: dir: /sys/class/scsi_host//host2 device dir: /sys/devices/pci0000:00/0000:00:17.0/ata3/host2 [3] ahci sata: dir: /sys/class/scsi_host//host3 device dir: /sys/devices/pci0000:00/0000:00:17.0/ata4/host3 [4] ahci sata: dir: /sys/class/scsi_host//host4 device dir: /sys/devices/pci0000:00/0000:00:17.0/ata5/host4 [5] ahci sata: dir: /sys/class/scsi_host//host5 device dir: /sys/devices/pci0000:00/0000:00:17.0/ata6/host5 [6] usb-storage usb:1-2:1.0 dir: /sys/class/scsi_host//host6 device dir: /sys/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0/host6 and my lsscsi -vt root@box:/home/tc# lsscsi -vt [0:0:0:0] disk sata:50014ee658907201 /dev/sda dir: /sys/bus/scsi/devices/0:0:0:0 [/sys/devices/pci0000:00/0000:00:17.0/ata1/host0/target0:0:0/0:0:0:0] [6:0:0:0] disk usb:1-2:1.0 /dev/sdb dir: /sys/bus/scsi/devices/6:0:0:0 [/sys/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0/host6/target6:0:0/6:0:0:0] Thanks can you please send in PM the extracted diag html ? Quote Link to comment Share on other sites More sharing options...
Jizar Stoffel Posted March 24, 2022 Share #1617 Posted March 24, 2022 Hello, it has taken me 4 days to read thru this topic, and finally come out with a woking DS3632xs+ DSM 7. Although I was able to update from my 6.2 on the first try with DS3615xs... but after the 1st reboot I lost all my files because of errors after errors! (no matter, thats what backups are for) Here is my problems now... In order to be able to install the DSM without getting the Drives Error (3,4 blablabla)... that has to do with "SataPortMap (SPM)" and "DiskIdxMap(DIM)" , I set my settings to SPM 1 and DIM 00. That got me all the way to installation on DS3622 and Found 1 drive. After that I rebooted the machine and on the Loader Menu I pressed "e" and manually changed the SPM to 64 and SPM to 0004. and Got a fully working 8 disks, I went ahead and install all my main apps. (Plex, sonarr, radarr, jackett, etc). Had it all working fine for 2 days. Due to a power outage. the machine got reboot it and when it came back on, there were only 1 drive in the system and a bunch of errors... Fine, I reboot again, Pressed 'e' on loader menu, edit the lines again... and pressed F10 and got all my drives back. Then I tried to reboot into tinycore and manually change the user_config.json to reflect the changes I made. I saved it but when I reboot it, the values were not saved... So I read that TC only saves into RAM and the values gets reseted on reboot, And I should ssh into TC and run the "sudo ./rploader.sh backup now" command to save it, but now for some reason, everytime I reboot into TC the new values are there, but it does not transfer to the installed loader. Am I going to have to redo the whole process from scratch? or is there a way to permanently save the changes on user_config,json to reflect the installed Loader? If I have to reinstall the whole thing , should I set SPM to 64 and DIM to 0004, and if I get the same drives errors, Ill just 'e' on loader menu and change it to 1 and 00. just for the install and then let it reboot normally? 2. I had a USB 1gb NIC working on 6.2. On DSM 7, it finds the USB NIC but it does not load as NIC or LAN2, I only have the LAN1 from my onboard NIC (which is only 100mb) I also tried adding a PCI 2.5Gb card, but that does not work yet, maybe missing EXT. I already post a request on the github page. and I did add a mac2 to the user_config.json. just not sure is the changes are sticking to the loader on reboot. I really dont mind the NIC problem, my onboard card does a pretty decent job send 4k movies to my TVs on plex. as for files, I have a 10Gb card on my PC serving as file transfer intermediate. my BareMetal setup is: I7 4790s on a Intel H81 MB 16GB DD3 4 port on board SATA 4 port PCI SATA card - had a 8 port before, but that gave me lots of headace messing around with SPM and DIM. 1 Quote Link to comment Share on other sites More sharing options...
Jizar Stoffel Posted March 24, 2022 Share #1618 Posted March 24, 2022 16 minutes ago, Jizar Stoffel said: Hello, it has taken me 4 days to read thru this topic, and finally come out with a woking DS3632xs+ DSM 7. Although I was able to update from my 6.2 on the first try with DS3615xs... but after the 1st reboot I lost all my files because of errors after errors! (no matter, thats what backups are for) Here is my problems now... In order to be able to install the DSM without getting the Drives Error (3,4 blablabla)... that has to do with "SataPortMap (SPM)" and "DiskIdxMap(DIM)" , I set my settings to SPM 1 and DIM 00. That got me all the way to installation on DS3622 and Found 1 drive. After that I rebooted the machine and on the Loader Menu I pressed "e" and manually changed the SPM to 64 and SPM to 0004. and Got a fully working 8 disks, I went ahead and install all my main apps. (Plex, sonarr, radarr, jackett, etc). Had it all working fine for 2 days. Due to a power outage. the machine got reboot it and when it came back on, there were only 1 drive in the system and a bunch of errors... Fine, I reboot again, Pressed 'e' on loader menu, edit the lines again... and pressed F10 and got all my drives back. Then I tried to reboot into tinycore and manually change the user_config.json to reflect the changes I made. I saved it but when I reboot it, the values were not saved... So I read that TC only saves into RAM and the values gets reseted on reboot, And I should ssh into TC and run the "sudo ./rploader.sh backup now" command to save it, but now for some reason, everytime I reboot into TC the new values are there, but it does not transfer to the installed loader. Am I going to have to redo the whole process from scratch? or is there a way to permanently save the changes on user_config,json to reflect the installed Loader? If I have to reinstall the whole thing , should I set SPM to 64 and DIM to 0004, and if I get the same drives errors, Ill just 'e' on loader menu and change it to 1 and 00. just for the install and then let it reboot normally? 2. I had a USB 1gb NIC working on 6.2. On DSM 7, it finds the USB NIC but it does not load as NIC or LAN2, I only have the LAN1 from my onboard NIC (which is only 100mb) I also tried adding a PCI 2.5Gb card, but that does not work yet, maybe missing EXT. I already post a request on the github page. and I did add a mac2 to the user_config.json. just not sure is the changes are sticking to the loader on reboot. I really dont mind the NIC problem, my onboard card does a pretty decent job send 4k movies to my TVs on plex. as for files, I have a 10Gb card on my PC serving as file transfer intermediate. my BareMetal setup is: I7 4790s on a Intel H81 MB 16GB DD3 4 port on board SATA 4 port PCI SATA card - had a 8 port before, but that gave me lots of headace messing around with SPM and DIM. FYI: my H81 intel Motherboard has 4 fisical SATA port. but on bios and on TC it says it has 6 ports... after some research I found out that Port 1,2,5,6 are the fisical ones. and port 3 and 4 its up somewhere in the 4th Dimention... thats why it gives the drive error (3,4.... blablabla, disable crap) Quote Link to comment Share on other sites More sharing options...
Dvalin21 Posted March 25, 2022 Share #1619 Posted March 25, 2022 I ran a fdisk -l and im getting a lot of zram partitions created. Is this right? Disk /dev/ram0: 640 MiB, 671088640 bytes, 1310720 sectors Units: sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk /dev/ram1: 640 MiB, 671088640 bytes, 1310720 sectors Units: sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk /dev/ram2: 640 MiB, 671088640 bytes, 1310720 sectors Units: sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk /dev/ram3: 640 MiB, 671088640 bytes, 1310720 sectors Units: sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk /dev/ram4: 640 MiB, 671088640 bytes, 1310720 sectors Units: sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk /dev/ram5: 640 MiB, 671088640 bytes, 1310720 sectors Units: sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk /dev/ram6: 640 MiB, 671088640 bytes, 1310720 sectors Units: sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk /dev/ram7: 640 MiB, 671088640 bytes, 1310720 sectors Units: sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk /dev/ram8: 640 MiB, 671088640 bytes, 1310720 sectors Units: sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk /dev/ram9: 640 MiB, 671088640 bytes, 1310720 sectors Units: sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk /dev/ram10: 640 MiB, 671088640 bytes, 1310720 sectors Units: sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk /dev/ram11: 640 MiB, 671088640 bytes, 1310720 sectors Units: sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk /dev/ram12: 640 MiB, 671088640 bytes, 1310720 sectors Units: sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk /dev/ram13: 640 MiB, 671088640 bytes, 1310720 sectors Units: sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk /dev/ram14: 640 MiB, 671088640 bytes, 1310720 sectors Units: sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk /dev/ram15: 640 MiB, 671088640 bytes, 1310720 sectors Units: sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk /dev/sdf: 596.2 GiB, 640133946880 bytes, 1250261615 sectors Disk model: HD642JJ Units: sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disklabel type: dos Disk identifier: 0x18dbd415 Device Boot Start End Sectors Size Id Type /dev/sdf1 2048 4982527 4980480 2.4G fd Linux raid autodetect /dev/sdf2 4982528 9176831 4194304 2G fd Linux raid autodetect Disk /dev/sdh: 2.7 TiB, 3000592982016 bytes, 5860533168 sectors Disk model: WD30EZRS-11J99B1 Units: sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disklabel type: gpt Disk identifier: 7CDD0B2F-94F9-4DF4-AE76-D3DD01878F80 Device Start End Sectors Size Type /dev/sdh1 2048 4982527 4980480 2.4G Linux RAID /dev/sdh2 4982528 9176831 4194304 2G Linux RAID Disk /dev/sdi: 2.7 TiB, 3000592982016 bytes, 5860533168 sectors Disk model: HUA723030ALA640 Units: sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disklabel type: gpt Disk identifier: 41ECEF46-7A13-4E19-BE3C-924FC7E73D17 Device Start End Sectors Size Type /dev/sdi1 2048 4982527 4980480 2.4G Linux RAID /dev/sdi2 4982528 9176831 4194304 2G Linux RAID Disk /dev/sdg: 1.8 TiB, 2000398934016 bytes, 3907029168 sectors Disk model: ST2000DM008-2FR102 Units: sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disklabel type: dos Disk identifier: 0x29bb22f8 Device Boot Start End Sectors Size Id Type /dev/sdg1 2048 4982527 4980480 2.4G fd Linux raid autodetect /dev/sdg2 4982528 9176831 4194304 2G fd Linux raid autodetect Disk /dev/synoboot: 14.5 GiB, 15510536192 bytes, 30294016 sectors Disk model: USB Flash Drive Units: sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disklabel type: dos Disk identifier: 0xf110ee87 Device Boot Start End Sectors Size Id Type /dev/synoboot1 * 2048 100351 98304 48M 83 Linux /dev/synoboot2 100352 253951 153600 75M 83 Linux /dev/synoboot3 253952 2097151 1843200 900M 83 Linux Disk /dev/md0: 2.4 GiB, 2549940224 bytes, 4980352 sectors Units: sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk /dev/zram0: 3 GiB, 3157262336 bytes, 770816 sectors Units: sectors of 1 * 4096 = 4096 bytes Sector size (logical/physical): 4096 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk /dev/zram1: 3 GiB, 3157262336 bytes, 770816 sectors Units: sectors of 1 * 4096 = 4096 bytes Sector size (logical/physical): 4096 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk /dev/zram2: 3 GiB, 3157262336 bytes, 770816 sectors Units: sectors of 1 * 4096 = 4096 bytes Sector size (logical/physical): 4096 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk /dev/zram3: 3 GiB, 3157262336 bytes, 770816 sectors Units: sectors of 1 * 4096 = 4096 bytes Sector size (logical/physical): 4096 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk /dev/zram4: 3 GiB, 3157262336 bytes, 770816 sectors Units: sectors of 1 * 4096 = 4096 bytes Sector size (logical/physical): 4096 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk /dev/zram5: 3 GiB, 3157262336 bytes, 770816 sectors Units: sectors of 1 * 4096 = 4096 bytes Sector size (logical/physical): 4096 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk /dev/zram6: 3 GiB, 3157262336 bytes, 770816 sectors Units: sectors of 1 * 4096 = 4096 bytes Sector size (logical/physical): 4096 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk /dev/zram7: 3 GiB, 3157262336 bytes, 770816 sectors Units: sectors of 1 * 4096 = 4096 bytes Sector size (logical/physical): 4096 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk /dev/md1: 2 GiB, 2147418112 bytes, 4194176 sectors Units: sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 byte Quote Link to comment Share on other sites More sharing options...
ditheo Posted March 25, 2022 Share #1620 Posted March 25, 2022 In addition to my attempts I did a new usb disk , ran only satamap,identifyusb, serialgen. I didn;t include any extensions Build a DS918+ image with command ./rploader build apololake-7.0.1-42218 auto now i can see the webpage i install the pat file but it did not restart. when i restart with the power button it gave me error: failure reading sector 0xec80 from 'hd0' Then the network did not get any dhcp address . my messages before restart are Mar 25 09:59:15 kernel: [ 0.000000] x86/fpu: Supporting XSAVE feature 0x08: 'MPX bounds registers' Mar 25 09:59:15 kernel: [ 0.000000] x86/fpu: Supporting XSAVE feature 0x10: 'MPX CSR' Mar 25 09:59:15 kernel: [ 0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 1088 bytes, using 'standard' format. Mar 25 09:59:15 kernel: [ 0.000000] e820: BIOS-provided physical RAM map: Mar 25 09:59:15 kernel: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009dfff] usable Mar 25 09:59:15 kernel: [ 0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009efff] reserved Mar 25 09:59:15 kernel: [ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] usable Mar 25 09:59:15 kernel: [ 0.000000] BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved Mar 25 09:59:15 kernel: [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ce6ffff] usable Mar 25 09:59:15 kernel: [ 0.000000] BIOS-e820: [mem 0x000000007ce70000-0x000000007d66ffff] reserved Mar 25 09:59:15 kernel: [ 0.000000] BIOS-e820: [mem 0x000000007d670000-0x000000007d79ffff] ACPI data Mar 25 09:59:15 kernel: [ 0.000000] BIOS-e820: [mem 0x000000007d7a0000-0x000000007dc13fff] ACPI NVS Mar 25 09:59:15 kernel: [ 0.000000] BIOS-e820: [mem 0x000000007dc14000-0x000000007e993fff] reserved Mar 25 09:59:15 kernel: [ 0.000000] BIOS-e820: [mem 0x000000007e994000-0x000000007ec4dfff] type 20 Mar 25 09:59:15 kernel: [ 0.000000] BIOS-e820: [mem 0x000000007ec4e000-0x000000007ec4efff] usable Mar 25 09:59:15 kernel: [ 0.000000] BIOS-e820: [mem 0x000000007ec4f000-0x000000007fffffff] reserved Mar 25 09:59:15 kernel: [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved Mar 25 09:59:15 kernel: [ 0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved Mar 25 09:59:15 kernel: [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved Mar 25 09:59:15 kernel: [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved Mar 25 09:59:15 kernel: [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved Mar 25 09:59:15 kernel: [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved Mar 25 09:59:15 kernel: [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000047effffff] usable Mar 25 09:59:15 kernel: [ 0.000000] earlycon: Early serial console at I/O port 0x3f8 (options '115200n8') Mar 25 09:59:15 kernel: [ 0.000000] bootconsole [uart0] enabled Mar 25 09:59:15 kernel: [ 0.000000] NX (Execute Disable) protection: active Mar 25 09:59:15 kernel: [ 0.000000] efi: EFI v2.70 by American Megatrends Mar 25 09:59:15 kernel: [ 0.000000] efi: ACPI=0x7db9a000 ACPI 2.0=0x7db9a014 SMBIOS=0x7e7af000 SMBIOS 3.0=0x7e7ae000 ESRT=0x79f90d98 Mar 25 09:59:15 kernel: [ 0.000000] esrt: Reserving ESRT space from 0x0000000079f90d98 to 0x0000000079f90dd0. Mar 25 09:59:15 kernel: [ 0.000000] SMBIOS 3.2.0 present. Mar 25 09:59:15 kernel: [ 0.000000] Kernel/User page tables isolation: disabled Mar 25 09:59:15 kernel: [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved Mar 25 09:59:15 kernel: [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable Mar 25 09:59:15 kernel: [ 0.000000] e820: last_pfn = 0x47f000 max_arch_pfn = 0x400000000 Mar 25 09:59:15 kernel: [ 0.000000] MTRR default type: write-back Mar 25 09:59:15 kernel: [ 0.000000] MTRR fixed ranges enabled: Mar 25 09:59:15 kernel: [ 0.000000] 00000-9FFFF write-back Mar 25 09:59:15 kernel: [ 0.000000] A0000-BFFFF uncachable Mar 25 09:59:15 kernel: [ 0.000000] C0000-FFFFF write-protect Mar 25 09:59:15 kernel: [ 0.000000] MTRR variable ranges enabled: Mar 25 09:59:15 kernel: [ 0.000000] 0 base 0080000000 mask 7F80000000 uncachable Mar 25 09:59:15 kernel: [ 0.000000] 1 base 2000000000 mask 6000000000 uncachable Mar 25 09:59:15 kernel: [ 0.000000] 2 base 1000000000 mask 7000000000 uncachable Mar 25 09:59:15 kernel: [ 0.000000] 3 base 0800000000 mask 7800000000 uncachable Mar 25 09:59:15 kernel: [ 0.000000] 4 base 4000000000 mask 4000000000 uncachable Mar 25 09:59:15 kernel: [ 0.000000] 5 disabled Mar 25 09:59:15 kernel: [ 0.000000] 6 disabled Mar 25 09:59:15 kernel: [ 0.000000] 7 disabled Mar 25 09:59:15 kernel: [ 0.000000] 8 disabled Mar 25 09:59:15 kernel: [ 0.000000] 9 disabled Mar 25 09:59:15 kernel: [ 0.000000] x86/PAT: Configuration [0-7]: WB WT UC- UC WB WT UC- UC Mar 25 09:59:15 kernel: [ 0.000000] e820: last_pfn = 0x7ec4f max_arch_pfn = 0x400000000 Mar 25 09:59:15 kernel: [ 0.000000] Base memory trampoline at [ffff880000096000] 96000 size 28672 Mar 25 09:59:15 kernel: [ 0.000000] Using GB pages for direct mapping Mar 25 09:59:15 kernel: [ 0.000000] BRK [0x0446b000, 0x0446bfff] PGTABLE Mar 25 09:59:15 kernel: [ 0.000000] BRK [0x0446c000, 0x0446cfff] PGTABLE Mar 25 09:59:15 kernel: [ 0.000000] BRK [0x0446d000, 0x0446dfff] PGTABLE Mar 25 09:59:15 kernel: [ 0.000000] BRK [0x0446e000, 0x0446efff] PGTABLE Mar 25 09:59:15 kernel: [ 0.000000] BRK [0x0446f000, 0x0446ffff] PGTABLE Mar 25 09:59:15 kernel: [ 0.000000] log_buf_len: 33554432 bytes Mar 25 09:59:15 kernel: [ 0.000000] early log buf free: 126012(96%) Mar 25 09:59:15 kernel: [ 0.000000] RAMDISK: [mem 0x35dd7000-0x36ee2fff] Mar 25 09:59:15 kernel: [ 0.000000] ACPI: Early table checksum verification disabled Mar 25 09:59:15 kernel: [ 0.000000] ACPI: RSDP 0x000000007DB9A014 000024 (v02 ALASKA) Mar 25 09:59:15 kernel: [ 0.000000] ACPI: XSDT 0x000000007DB99728 0000BC (v01 ALASKA A M I 01072009 AMI 01000013) Mar 25 09:59:15 kernel: [ 0.000000] ACPI: FACP 0x000000007D799000 000114 (v06 ALASKA A M I 01072009 AMI 00010013) Mar 25 09:59:15 kernel: [ 0.000000] ACPI: DSDT 0x000000007D760000 038BF6 (v02 ALASKA A M I 01072009 INTL 20160527) Mar 25 09:59:15 kernel: [ 0.000000] ACPI: FACS 0x000000007DC13000 000040 Mar 25 09:59:15 kernel: [ 0.000000] ACPI: MCFG 0x000000007D79D000 00003C (v01 ALASKA A M I 01072009 MSFT 00000097) Mar 25 09:59:15 kernel: [ 0.000000] ACPI: SSDT 0x000000007D79A000 0020AD (v02 CpuRef CpuSsdt 00003000 INTL 20160527) Mar 25 09:59:15 kernel: [ 0.000000] ACPI: FIDT 0x000000007D75F000 00009C (v01 ALASKA A M I 01072009 AMI 00010013) Mar 25 09:59:15 kernel: [ 0.000000] ACPI: SSDT 0x000000007D75B000 0031DA (v02 SaSsdt SaSsdt 00003000 INTL 20160527) Mar 25 09:59:15 kernel: [ 0.000000] ACPI: SSDT 0x000000007D758000 00276E (v02 Intel PegSsdt 00001000 INTL 20160527) Mar 25 09:59:15 kernel: [ 0.000000] ACPI: HPET 0x000000007D79F000 000038 (v01 ALASKA A M I 01072009 AMI 01000013) Mar 25 09:59:15 kernel: [ 0.000000] ACPI: SSDT 0x000000007D756000 00147B (v02 ALASKA Ther_Rvp 00001000 INTL 20160527) Mar 25 09:59:15 kernel: [ 0.000000] ACPI: SSDT 0x000000007D752000 00323E (v02 INTEL xh_cmvd4 00000000 INTL 20160527) Mar 25 09:59:15 kernel: [ 0.000000] ACPI: NHLT 0x000000007D79E000 00002D (v00 ALASKA A M I 01072009 AMI 01000013) Mar 25 09:59:15 kernel: [ 0.000000] ACPI: LPIT 0x000000007D751000 000094 (v01 ALASKA A M I 01072009 AMI 01000013) Mar 25 09:59:15 kernel: [ 0.000000] ACPI: SSDT 0x000000007D74D000 002720 (v02 ALASKA PtidDevc 00001000 INTL 20160527) Mar 25 09:59:15 kernel: [ 0.000000] ACPI: SSDT 0x000000007D74A000 0025B2 (v02 ALASKA TbtTypeC 00000000 INTL 20160527) Mar 25 09:59:15 kernel: [ 0.000000] ACPI: DBGP 0x000000007D749000 000034 (v01 ALASKA A M I 01072009 AMI 01000013) Mar 25 09:59:15 kernel: [ 0.000000] ACPI: DBG2 0x000000007D748000 000054 (v00 ALASKA A M I 01072009 AMI 01000013) Mar 25 09:59:15 kernel: [ 0.000000] ACPI: TPM2 0x000000007D747000 00004C (v04 ALASKA A M I 00000001 AMI 00000000) Mar 25 09:59:15 kernel: [ 0.000000] ACPI: WSMT 0x000000007D750000 000028 (v01 ALASKA A M I 01072009 AMI 00010013) Mar 25 09:59:15 kernel: [ 0.000000] ACPI: APIC 0x000000007D746000 0000BC (v04 ALASKA A M I 01072009 AMI 00010013) Mar 25 09:59:15 kernel: [ 0.000000] ACPI: FPDT 0x000000007D745000 000044 (v01 ALASKA CML 01072009 AMI 01000013) Mar 25 09:59:15 kernel: [ 0.000000] ACPI: Local APIC address 0xfee00000 Mar 25 09:59:15 kernel: [ 0.000000] Zone ranges: Mar 25 09:59:15 kernel: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] Mar 25 09:59:15 kernel: [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] Mar 25 09:59:15 kernel: [ 0.000000] Normal [mem 0x0000000100000000-0x000000047effffff] Mar 25 09:59:15 kernel: [ 0.000000] Movable zone start for each node Mar 25 09:59:15 kernel: [ 0.000000] Early memory node ranges Mar 25 09:59:15 kernel: [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009dfff] Mar 25 09:59:15 kernel: [ 0.000000] node 0: [mem 0x000000000009f000-0x000000000009ffff] Mar 25 09:59:15 kernel: [ 0.000000] node 0: [mem 0x0000000000100000-0x000000007ce6ffff] Mar 25 09:59:15 kernel: [ 0.000000] node 0: [mem 0x000000007ec4e000-0x000000007ec4efff] Mar 25 09:59:15 kernel: [ 0.000000] node 0: [mem 0x0000000100000000-0x000000047effffff] Mar 25 09:59:15 kernel: [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000047effffff] Mar 25 09:59:15 kernel: [ 0.000000] On node 0 totalpages: 4177423 Mar 25 09:59:15 kernel: [ 0.000000] DMA zone: 64 pages used for memmap Mar 25 09:59:15 kernel: [ 0.000000] DMA zone: 24 pages reserved Mar 25 09:59:15 kernel: [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 Mar 25 09:59:15 kernel: [ 0.000000] DMA32 zone: 7930 pages used for memmap Mar 25 09:59:15 kernel: [ 0.000000] DMA32 zone: 507505 pages, LIFO batch:31 Mar 25 09:59:15 kernel: [ 0.000000] Normal zone: 57280 pages used for memmap Mar 25 09:59:15 kernel: [ 0.000000] Normal zone: 3665920 pages, LIFO batch:31 Mar 25 09:59:15 kernel: [ 0.000000] ACPI: PM-Timer IO Port: 0x1808 Mar 25 09:59:15 kernel: [ 0.000000] ACPI: Local APIC address 0xfee00000 Mar 25 09:59:15 kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) Mar 25 09:59:15 kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) Mar 25 09:59:15 kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) Mar 25 09:59:15 kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) Mar 25 09:59:15 kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1]) Mar 25 09:59:15 kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1]) Mar 25 09:59:15 kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1]) Mar 25 09:59:15 kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1]) Mar 25 09:59:15 kernel: [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119 Mar 25 09:59:15 kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) Mar 25 09:59:15 kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) Mar 25 09:59:15 kernel: [ 0.000000] ACPI: IRQ0 used by override. Mar 25 09:59:15 kernel: [ 0.000000] ACPI: IRQ9 used by override. Mar 25 09:59:15 kernel: [ 0.000000] Using ACPI (MADT) for SMP configuration information Mar 25 09:59:15 kernel: [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 Mar 25 09:59:15 kernel: [ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs Mar 25 09:59:15 kernel: [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] Mar 25 09:59:15 kernel: [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff] Mar 25 09:59:15 kernel: [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff] Mar 25 09:59:15 kernel: [ 0.000000] PM: Registered nosave memory: [mem 0x7ce70000-0x7d66ffff] Mar 25 09:59:15 kernel: [ 0.000000] PM: Registered nosave memory: [mem 0x7d670000-0x7d79ffff] Mar 25 09:59:15 kernel: [ 0.000000] PM: Registered nosave memory: [mem 0x7d7a0000-0x7dc13fff] Mar 25 09:59:15 kernel: [ 0.000000] PM: Registered nosave memory: [mem 0x7dc14000-0x7e993fff] Mar 25 09:59:15 kernel: [ 0.000000] PM: Registered nosave memory: [mem 0x7e994000-0x7ec4dfff] Mar 25 09:59:15 kernel: [ 0.000000] PM: Registered nosave memory: [mem 0x7ec4f000-0x7fffffff] Mar 25 09:59:15 kernel: [ 0.000000] PM: Registered nosave memory: [mem 0x80000000-0xdfffffff] Mar 25 09:59:15 kernel: [ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff] Mar 25 09:59:15 kernel: [ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfdffffff] Mar 25 09:59:15 kernel: [ 0.000000] PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff] Mar 25 09:59:15 kernel: [ 0.000000] PM: Registered nosave memory: [mem 0xfe011000-0xfebfffff] Mar 25 09:59:15 kernel: [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] Mar 25 09:59:15 kernel: [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff] Mar 25 09:59:15 kernel: [ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff] Mar 25 09:59:15 kernel: [ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfedfffff] Mar 25 09:59:15 kernel: [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] Mar 25 09:59:15 kernel: [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff] Mar 25 09:59:15 kernel: [ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff] Mar 25 09:59:15 kernel: [ 0.000000] e820: [mem 0x80000000-0xdfffffff] available for PCI devices Mar 25 09:59:15 kernel: [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns Mar 25 09:59:15 kernel: [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 Mar 25 09:59:15 kernel: [ 0.000000] PERCPU: Embedded 33 pages/cpu @ffff88047cc00000 s95128 r8192 d31848 u262144 Mar 25 09:59:15 kernel: [ 0.000000] pcpu-alloc: s95128 r8192 d31848 u262144 alloc=1*2097152 Mar 25 09:59:15 kernel: [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 Mar 25 09:59:15 kernel: [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4112125 Mar 25 09:59:15 kernel: [ 0.000000] Kernel command line: BOOT_IMAGE=/zImage withefi earlyprintk syno_hw_version=DS918+ console=ttyS0,115200n8 netif_num=1 pid=0x6387 earlycon=uart8250,io, 0x3f8,115200n8 syno_port_thaw=1 mac1=0011323766C2 sn=1860PDN01 Mar 25 09:59:15 kernel: [ 0.000000] Synology Hardware Version: DS918+ Mar 25 09:59:15 kernel: [ 0.000000] Internal netif num: 1 Mar 25 09:59:15 kernel: [ 0.000000] Mac1: 0011323766C2 Mar 25 09:59:15 kernel: [ 0.000000] Serial Number: 1860PDN016308 Mar 25 09:59:15 kernel: [ 0.000000] Disk Index Map: 00 Mar 25 09:59:15 kernel: [ 0.000000] SYNO GPIO hdd detect pin: 0 Mar 25 09:59:15 kernel: [ 0.000000] Vender format version: 2 Mar 25 09:59:15 kernel: [ 0.000000] Power on seq num: 1 Mar 25 09:59:15 kernel: [ 0.000000] Sata Port Map: 6 Mar 25 09:59:15 kernel: [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) Mar 25 09:59:15 kernel: [ 0.000000] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes) Mar 25 09:59:15 kernel: [ 0.000000] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes) Mar 25 09:59:15 kernel: [ 0.000000] Memory: 16223556K/16709692K available (5624K kernel code, 863K rwdata, 1748K rodata, 916K init, 660K bss, 486136K reserved, 0K cma-reserved) Mar 25 09:59:15 kernel: [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 Mar 25 09:59:15 kernel: [ 0.000000] Hierarchical RCU implementation. Mar 25 09:59:15 kernel: [ 0.000000] Build-time adjustment of leaf fanout to 64. Mar 25 09:59:15 kernel: [ 0.000000] NR_IRQS:4352 nr_irqs:2048 16 Mar 25 09:59:15 kernel: [ 0.000000] Console: colour dummy device 80x25 Mar 25 09:59:15 kernel: [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns Mar 25 09:59:15 kernel: [ 0.000000] hpet clockevent registered Mar 25 09:59:15 kernel: [ 0.000000] tsc: PIT calibration matches HPET. 1 loops Mar 25 09:59:15 kernel: [ 0.000000] tsc: Detected 3599.923 MHz processor Mar 25 09:59:15 kernel: [ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 7199.84 BogoMIPS (lpj=3599923) Mar 25 09:59:15 kernel: [ 0.011834] pid_max: default: 32768 minimum: 301 Mar 25 09:59:15 kernel: [ 0.016970] ACPI: Core revision 20150930 Mar 25 09:59:15 kernel: [ 0.050794] ACPI: 8 ACPI AML tables successfully acquired and loaded Mar 25 09:59:15 kernel: [ 0.058709] Security Framework initialized Mar 25 09:59:15 kernel: [ 0.063301] AppArmor: AppArmor initialized Mar 25 09:59:15 kernel: [ 0.067843] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes) Mar 25 09:59:15 kernel: [ 0.075482] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes) Mar 25 09:59:15 kernel: [ 0.083748] Initializing cgroup subsys io Mar 25 09:59:15 kernel: [ 0.088197] Initializing cgroup subsys memory Mar 25 09:59:15 kernel: [ 0.093043] Initializing cgroup subsys devices Mar 25 09:59:15 kernel: [ 0.097991] Initializing cgroup subsys freezer Mar 25 09:59:15 kernel: [ 0.102943] CPU: Physical Processor ID: 0 Mar 25 09:59:15 kernel: [ 0.107402] CPU: Processor Core ID: 0 Mar 25 09:59:15 kernel: [ 0.112433] CPU0: Thermal monitoring enabled (TM1) Mar 25 09:59:15 kernel: [ 0.117770] process: using mwait in idle threads Mar 25 09:59:15 kernel: [ 0.122898] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8 Mar 25 09:59:15 kernel: [ 0.128909] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4 Mar 25 09:59:15 kernel: [ 0.135569] Speculative Store Bypass: Vulnerable Mar 25 09:59:15 kernel: [ 0.140985] Freeing SMP alternatives memory: 24K Mar 25 09:59:15 kernel: [ 0.151730] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 Mar 25 09:59:15 kernel: [ 0.168372] TSC deadline timer enabled Mar 25 09:59:15 kernel: [ 0.172512] smpboot: CPU0: Intel(R) Core(TM) i3-10100F CPU @ 3.60GHz (family: 0x6, model: 0xa5, stepping: 0x3) Mar 25 09:59:15 kernel: [ 0.183637] Performance Events: PEBS fmt3+, generic architected perfmon, full-width counters, Intel PMU driver. Mar 25 09:59:15 kernel: [ 0.194835] ... version: 4 Mar 25 09:59:15 kernel: [ 0.199270] ... bit width: 48 Mar 25 09:59:15 kernel: [ 0.203793] ... generic registers: 4 Mar 25 09:59:15 kernel: [ 0.208229] ... value mask: 0000ffffffffffff Mar 25 09:59:15 kernel: [ 0.214102] ... max period: 00007fffffffffff Mar 25 09:59:15 kernel: [ 0.219976] ... fixed-purpose events: 3 Mar 25 09:59:15 kernel: [ 0.224412] ... event mask: 000000070000000f Mar 25 09:59:15 kernel: [ 0.230445] x86: Booting SMP configuration: Mar 25 09:59:15 kernel: [ 0.235088] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 Mar 25 09:59:15 kernel: [ 0.264483] x86: Booted up 1 node, 8 CPUs Mar 25 09:59:15 kernel: [ 0.269126] smpboot: Total of 8 processors activated (57598.76 BogoMIPS) Mar 25 09:59:15 kernel: [ 0.280955] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. Mar 25 09:59:15 kernel: [ 0.289968] devtmpfs: initialized Mar 25 09:59:15 kernel: [ 0.293794] PM: Registering ACPI NVS region [mem 0x7d7a0000-0x7dc13fff] (4669440 bytes) Mar 25 09:59:15 kernel: [ 0.302722] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns Mar 25 09:59:15 kernel: [ 0.313519] futex hash table entries: 2048 (order: 5, 131072 bytes) Mar 25 09:59:15 kernel: [ 0.320494] pinctrl core: initialized pinctrl subsystem Mar 25 09:59:15 kernel: [ 0.326348] NET: Registered protocol family 16 Mar 25 09:59:15 kernel: [ 0.341284] cpuidle: using governor ladder Mar 25 09:59:15 kernel: [ 0.353834] cpuidle: using governor menu Mar 25 09:59:15 kernel: [ 0.358244] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it Mar 25 09:59:15 kernel: [ 0.366618] ACPI: bus type PCI registered Mar 25 09:59:15 kernel: [ 0.371083] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) Mar 25 09:59:15 kernel: [ 0.381371] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 Mar 25 09:59:15 kernel: [ 0.388888] PCI: Using configuration type 1 for base access Mar 25 09:59:15 kernel: [ 0.403255] ACPI: Added _OSI(Module Device) Mar 25 09:59:15 kernel: [ 0.407958] ACPI: Added _OSI(Processor Device) Mar 25 09:59:15 kernel: [ 0.412933] ACPI: Added _OSI(3.0 _SCP Extensions) Mar 25 09:59:15 kernel: [ 0.418204] ACPI: Added _OSI(Processor Aggregator Device) Mar 25 09:59:15 kernel: [ 0.442351] ACPI: Executed 36 blocks of module-level executable AML code Mar 25 09:59:15 kernel: [ 0.455408] ACPI: Dynamic OEM Table Load: Mar 25 09:59:15 kernel: [ 0.459920] ACPI: SSDT 0xFFFF88046A36E300 0000FC (v02 PmRef Cpu0Psd 00003000 INTL 20160527) Mar 25 09:59:15 kernel: [ 0.470054] ACPI: Executed 1 blocks of module-level executable AML code Mar 25 09:59:15 kernel: [ 0.477545] ACPI: \_SB_.PR00: _OSC native thermal LVT Acked Mar 25 09:59:15 kernel: [ 0.484540] ACPI: Dynamic OEM Table Load: Mar 25 09:59:15 kernel: [ 0.489069] ACPI: SSDT 0xFFFF88046AAC2000 000400 (v02 PmRef Cpu0Cst 00003001 INTL 20160527) Mar 25 09:59:15 kernel: [ 0.499200] ACPI: Executed 1 blocks of module-level executable AML code Mar 25 09:59:15 kernel: [ 0.506750] ACPI: Dynamic OEM Table Load: Mar 25 09:59:15 kernel: [ 0.511256] ACPI: SSDT 0xFFFF880469E83000 0006CB (v02 PmRef Cpu0Ist 00003000 INTL 20160527) Mar 25 09:59:15 kernel: [ 0.521397] ACPI: Executed 1 blocks of module-level executable AML code Mar 25 09:59:15 kernel: [ 0.529079] ACPI: Dynamic OEM Table Load: Mar 25 09:59:15 kernel: [ 0.533581] ACPI: SSDT 0xFFFF880469E83800 000778 (v02 PmRef ApIst 00003000 INTL 20160527) Mar 25 09:59:15 kernel: [ 0.543814] ACPI: Executed 1 blocks of module-level executable AML code Mar 25 09:59:15 kernel: [ 0.551382] ACPI: Dynamic OEM Table Load: Mar 25 09:59:15 kernel: [ 0.555915] ACPI: SSDT 0xFFFF880469E75000 000D22 (v02 PmRef ApPsd 00003000 INTL 20160527) Mar 25 09:59:15 kernel: [ 0.566369] ACPI: Executed 1 blocks of module-level executable AML code Mar 25 09:59:15 kernel: [ 0.573899] ACPI: Dynamic OEM Table Load: Mar 25 09:59:15 kernel: [ 0.578412] ACPI: SSDT 0xFFFF88046AAC2C00 0003CA (v02 PmRef ApCst 00003000 INTL 20160527) Mar 25 09:59:15 kernel: [ 0.588593] ACPI: Executed 1 blocks of module-level executable AML code Mar 25 09:59:15 kernel: [ 0.597656] ACPI: Interpreter enabled Mar 25 09:59:15 kernel: [ 0.601784] ACPI: (supports S0 S4 S5) Mar 25 09:59:15 kernel: [ 0.605877] ACPI: Using IOAPIC for interrupt routing Mar 25 09:59:15 kernel: [ 0.611452] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug Mar 25 09:59:15 kernel: [ 0.629801] ACPI: Power Resource [V0PR] (on) Mar 25 09:59:15 kernel: [ 0.634718] ACPI: Power Resource [V1PR] (on) Mar 25 09:59:15 kernel: [ 0.639623] ACPI: Power Resource [V2PR] (on) Mar 25 09:59:15 kernel: [ 0.648362] ACPI: Power Resource [FN00] (off) Mar 25 09:59:15 kernel: [ 0.653280] ACPI: Power Resource [FN01] (off) Mar 25 09:59:15 kernel: [ 0.658201] ACPI: Power Resource [FN02] (off) Mar 25 09:59:15 kernel: [ 0.663134] ACPI: Power Resource [FN03] (off) Mar 25 09:59:15 kernel: [ 0.668064] ACPI: Power Resource [FN04] (off) Mar 25 09:59:15 kernel: [ 0.673346] ACPI: Power Resource [PIN] (off) Mar 25 09:59:15 kernel: [ 0.678396] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) Mar 25 09:59:15 kernel: [ 0.685299] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] Mar 25 09:59:15 kernel: [ 0.694559] acpi PNP0A08:00: _OSC: platform does not support [PME AER] Mar 25 09:59:15 kernel: [ 0.701985] acpi PNP0A08:00: _OSC: OS now controls [PCIeCapability] Mar 25 09:59:15 kernel: [ 0.709007] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration Mar 25 09:59:15 kernel: [ 0.718365] PCI host bridge to bus 0000:00 Mar 25 09:59:15 kernel: [ 0.722949] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] Mar 25 09:59:15 kernel: [ 0.730548] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] Mar 25 09:59:15 kernel: [ 0.738147] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] Mar 25 09:59:15 kernel: [ 0.746503] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window] Mar 25 09:59:15 kernel: [ 0.754904] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window] Mar 25 09:59:15 kernel: [ 0.763313] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window] Mar 25 09:59:15 kernel: [ 0.771705] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window] Mar 25 09:59:15 kernel: [ 0.780115] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window] Mar 25 09:59:15 kernel: [ 0.788498] pci_bus 0000:00: root bus resource [mem 0x80000000-0xdfffffff window] Mar 25 09:59:15 kernel: [ 0.796873] pci_bus 0000:00: root bus resource [mem 0x4000000000-0x7fffffffff window] Mar 25 09:59:15 kernel: [ 0.805656] pci_bus 0000:00: root bus resource [mem 0xfc800000-0xfe7fffff window] Mar 25 09:59:15 kernel: [ 0.814057] pci_bus 0000:00: root bus resource [bus 00-fe] Mar 25 09:59:15 kernel: [ 0.820196] pci 0000:00:00.0: [8086:9b63] type 00 class 0x060000 Mar 25 09:59:15 kernel: [ 0.827186] pci 0000:00:01.0: [8086:1901] type 01 class 0x060400 Mar 25 09:59:15 kernel: [ 0.833959] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold Mar 25 09:59:15 kernel: [ 0.840886] pci 0000:00:01.0: System wakeup disabled by ACPI Mar 25 09:59:15 kernel: [ 0.847292] pci 0000:00:08.0: [8086:1911] type 00 class 0x088000 Mar 25 09:59:15 kernel: [ 0.854045] pci 0000:00:08.0: reg 0x10: [mem 0x400a013000-0x400a013fff 64bit] Mar 25 09:59:15 kernel: [ 0.862154] pci 0000:00:14.0: [8086:a3af] type 00 class 0x0c0330 Mar 25 09:59:15 kernel: [ 0.868916] pci 0000:00:14.0: reg 0x10: [mem 0x400a000000-0x400a00ffff 64bit] Mar 25 09:59:15 kernel: [ 0.876957] pci 0000:00:14.0: PME# supported from D3hot D3cold Mar 25 09:59:15 kernel: [ 0.883616] pci 0000:00:14.0: System wakeup disabled by ACPI Mar 25 09:59:15 kernel: [ 0.889987] pci 0000:00:14.2: [8086:a3b1] type 00 class 0x118000 Mar 25 09:59:15 kernel: [ 0.896728] pci 0000:00:14.2: reg 0x10: [mem 0x400a012000-0x400a012fff 64bit] Mar 25 09:59:15 kernel: [ 0.904831] pci 0000:00:16.0: [8086:a3ba] type 00 class 0x078000 Mar 25 09:59:15 kernel: [ 0.911586] pci 0000:00:16.0: reg 0x10: [mem 0x400a011000-0x400a011fff 64bit] Mar 25 09:59:15 kernel: [ 0.919608] pci 0000:00:16.0: PME# supported from D3hot Mar 25 09:59:15 kernel: [ 0.925602] pci 0000:00:17.0: [8086:a382] type 00 class 0x010601 Mar 25 09:59:15 kernel: [ 0.932358] pci 0000:00:17.0: reg 0x10: [mem 0x82324000-0x82325fff] Mar 25 09:59:15 kernel: [ 0.939386] pci 0000:00:17.0: reg 0x14: [mem 0x82327000-0x823270ff] Mar 25 09:59:15 kernel: [ 0.946418] pci 0000:00:17.0: reg 0x18: [io 0x5050-0x5057] Mar 25 09:59:15 kernel: [ 0.952675] pci 0000:00:17.0: reg 0x1c: [io 0x5040-0x5043] Mar 25 09:59:15 kernel: [ 0.958897] pci 0000:00:17.0: reg 0x20: [io 0x5020-0x503f] Mar 25 09:59:15 kernel: [ 0.965127] pci 0000:00:17.0: reg 0x24: [mem 0x82326000-0x823267ff] Mar 25 09:59:15 kernel: [ 0.972179] pci 0000:00:17.0: PME# supported from D3hot Mar 25 09:59:15 kernel: [ 0.978146] pci 0000:00:1b.0: [8086:a3e9] type 01 class 0x060400 Mar 25 09:59:15 kernel: [ 0.984933] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold Mar 25 09:59:15 kernel: [ 0.991832] pci 0000:00:1b.0: System wakeup disabled by ACPI Mar 25 09:59:15 kernel: [ 0.998201] pci 0000:00:1c.0: [8086:a396] type 01 class 0x060400 Mar 25 09:59:15 kernel: [ 1.004974] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold Mar 25 09:59:15 kernel: [ 1.011881] pci 0000:00:1c.0: System wakeup disabled by ACPI Mar 25 09:59:15 kernel: [ 1.018286] pci 0000:00:1f.0: [8086:a3c8] type 00 class 0x060100 Mar 25 09:59:15 kernel: [ 1.025209] pci 0000:00:1f.2: [8086:a3a1] type 00 class 0x058000 Mar 25 09:59:15 kernel: [ 1.031934] pci 0000:00:1f.2: reg 0x10: [mem 0x82320000-0x82323fff] Mar 25 09:59:15 kernel: [ 1.039102] pci 0000:00:1f.4: [8086:a3a3] type 00 class 0x0c0500 Mar 25 09:59:15 kernel: [ 1.045902] pci 0000:00:1f.4: reg 0x10: [mem 0x400a010000-0x400a0100ff 64bit] Mar 25 09:59:15 kernel: [ 1.053944] pci 0000:00:1f.4: reg 0x20: [io 0xefa0-0xefbf] Mar 25 09:59:15 kernel: [ 1.060334] pci 0000:00:1f.6: [8086:0d4d] type 00 class 0x020000 Mar 25 09:59:15 kernel: [ 1.067091] pci 0000:00:1f.6: reg 0x10: [mem 0x82300000-0x8231ffff] Mar 25 09:59:15 kernel: [ 1.074178] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold Mar 25 09:59:15 kernel: [ 1.081081] pci 0000:00:1f.6: System wakeup disabled by ACPI Mar 25 09:59:15 kernel: [ 1.087465] pci 0000:01:00.0: [10de:0f00] type 00 class 0x030000 Mar 25 09:59:15 kernel: [ 1.094194] pci 0000:01:00.0: reg 0x10: [mem 0x81000000-0x81ffffff] Mar 25 09:59:15 kernel: [ 1.101252] pci 0000:01:00.0: reg 0x14: [mem 0x4000000000-0x4007ffffff 64bit pref] Mar 25 09:59:15 kernel: [ 1.109756] pci 0000:01:00.0: reg 0x1c: [mem 0x4008000000-0x4009ffffff 64bit pref] Mar 25 09:59:15 kernel: [ 1.118259] pci 0000:01:00.0: reg 0x24: [io 0x4000-0x407f] Mar 25 09:59:15 kernel: [ 1.124515] pci 0000:01:00.0: reg 0x30: [mem 0x82000000-0x8207ffff pref] Mar 25 09:59:15 kernel: [ 1.132096] pci 0000:01:00.0: System wakeup disabled by ACPI Mar 25 09:59:15 kernel: [ 1.138458] pci 0000:01:00.1: [10de:0bea] type 00 class 0x040300 Mar 25 09:59:15 kernel: [ 1.145203] pci 0000:01:00.1: reg 0x10: [mem 0x82080000-0x82083fff] Mar 25 09:59:15 kernel: [ 1.154251] pci 0000:00:01.0: PCI bridge to [bus 01] Mar 25 09:59:15 kernel: [ 1.159822] pci 0000:00:01.0: bridge window [io 0x4000-0x4fff] Mar 25 09:59:15 kernel: [ 1.166661] pci 0000:00:01.0: bridge window [mem 0x81000000-0x820fffff] Mar 25 09:59:15 kernel: [ 1.174278] pci 0000:00:01.0: bridge window [mem 0x4000000000-0x4009ffffff 64bit pref] Mar 25 09:59:15 kernel: [ 1.183408] pci 0000:02:00.0: [1b21:3241] type 00 class 0x0c0330 Mar 25 09:59:15 kernel: [ 1.190175] pci 0000:02:00.0: reg 0x10: [mem 0x82200000-0x82207fff 64bit] Mar 25 09:59:15 kernel: [ 1.197873] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold Mar 25 09:59:15 kernel: [ 1.204761] pci 0000:02:00.0: System wakeup disabled by ACPI Mar 25 09:59:15 kernel: [ 1.213126] pci 0000:00:1b.0: PCI bridge to [bus 02] Mar 25 09:59:15 kernel: [ 1.218703] pci 0000:00:1b.0: bridge window [mem 0x82200000-0x822fffff] Mar 25 09:59:15 kernel: [ 1.226356] pci 0000:03:00.0: [9710:9901] type 00 class 0x070002 Mar 25 09:59:15 kernel: [ 1.233138] pci 0000:03:00.0: reg 0x10: [io 0x3030-0x3037] Mar 25 09:59:15 kernel: [ 1.239367] pci 0000:03:00.0: reg 0x14: [mem 0x82107000-0x82107fff] Mar 25 09:59:15 kernel: [ 1.246423] pci 0000:03:00.0: reg 0x20: [mem 0x82106000-0x82106fff] Mar 25 09:59:15 kernel: [ 1.253501] pci 0000:03:00.0: supports D1 D2 Mar 25 09:59:15 kernel: [ 1.258294] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold Mar 25 09:59:15 kernel: [ 1.265716] pci 0000:03:00.0: System wakeup disabled by ACPI Mar 25 09:59:15 kernel: [ 1.272084] pci 0000:03:00.1: [9710:9901] type 00 class 0x070002 Mar 25 09:59:15 kernel: [ 1.278858] pci 0000:03:00.1: reg 0x10: [io 0x3020-0x3027] Mar 25 09:59:15 kernel: [ 1.285114] pci 0000:03:00.1: reg 0x14: [mem 0x82105000-0x82105fff] Mar 25 09:59:15 kernel: [ 1.292161] pci 0000:03:00.1: reg 0x20: [mem 0x82104000-0x82104fff] Mar 25 09:59:15 kernel: [ 1.299255] pci 0000:03:00.1: supports D1 D2 Mar 25 09:59:15 kernel: [ 1.304032] pci 0000:03:00.1: PME# supported from D0 D1 D2 D3hot D3cold Mar 25 09:59:15 kernel: [ 1.311496] pci 0000:03:00.2: [9710:9901] type 00 class 0x070002 Mar 25 09:59:15 kernel: [ 1.318253] pci 0000:03:00.2: reg 0x10: [io 0x3010-0x3017] Mar 25 09:59:15 kernel: [ 1.324500] pci 0000:03:00.2: reg 0x14: [mem 0x82103000-0x82103fff] Mar 25 09:59:15 kernel: [ 1.331547] pci 0000:03:00.2: reg 0x20: [mem 0x82102000-0x82102fff] Mar 25 09:59:15 kernel: [ 1.338615] pci 0000:03:00.2: supports D1 D2 Mar 25 09:59:15 kernel: [ 1.343409] pci 0000:03:00.2: PME# supported from D0 D1 D2 D3hot D3cold Mar 25 09:59:15 kernel: [ 1.350881] pci 0000:03:00.3: [9710:9901] type 00 class 0x070002 Mar 25 09:59:15 kernel: [ 1.357630] pci 0000:03:00.3: reg 0x10: [io 0x3000-0x3007] Mar 25 09:59:15 kernel: [ 1.363885] pci 0000:03:00.3: reg 0x14: [mem 0x82101000-0x82101fff] Mar 25 09:59:15 kernel: [ 1.370941] pci 0000:03:00.3: reg 0x20: [mem 0x82100000-0x82100fff] Mar 25 09:59:15 kernel: [ 1.378018] pci 0000:03:00.3: supports D1 D2 Mar 25 09:59:15 kernel: [ 1.382803] pci 0000:03:00.3: PME# supported from D0 D1 D2 D3hot D3cold Mar 25 09:59:15 kernel: [ 1.392234] pci 0000:00:1c.0: PCI bridge to [bus 03] Mar 25 09:59:15 kernel: [ 1.397809] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff] Mar 25 09:59:15 kernel: [ 1.404623] pci 0000:00:1c.0: bridge window [mem 0x82100000-0x821fffff] Mar 25 09:59:15 kernel: [ 1.412250] pci_bus 0000:00: on NUMA node 0 Mar 25 09:59:15 kernel: [ 1.418712] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *0 Mar 25 09:59:15 kernel: [ 1.426740] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *1 Mar 25 09:59:15 kernel: [ 1.434792] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0 Mar 25 09:59:15 kernel: [ 1.442834] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0 Mar 25 09:59:15 kernel: [ 1.450894] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0 Mar 25 09:59:15 kernel: [ 1.458920] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0 Mar 25 09:59:15 kernel: [ 1.466954] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0 Mar 25 09:59:15 kernel: [ 1.474970] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0 Mar 25 09:59:15 kernel: [ 1.483212] ACPI: Enabled 5 GPEs in block 00 to 7F Mar 25 09:59:15 kernel: [ 1.488677] vgaarb: setting as boot device: PCI:0000:01:00.0 Mar 25 09:59:15 kernel: [ 1.495026] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none Mar 25 09:59:15 kernel: [ 1.504108] vgaarb: loaded Mar 25 09:59:15 kernel: [ 1.507130] vgaarb: bridge control possible 0000:01:00.0 Mar 25 09:59:15 kernel: [ 1.513109] SCSI subsystem initialized Mar 25 09:59:15 kernel: [ 1.517339] libata version 3.00 loaded. Mar 25 09:59:15 kernel: [ 1.521647] pps_core: LinuxPPS API ver. 1 registered Mar 25 09:59:15 kernel: [ 1.527224] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> Mar 25 09:59:15 kernel: [ 1.537476] PTP clock support registered Mar 25 09:59:15 kernel: [ 1.541931] EFI Variables Facility v0.08 2004-May-17 Mar 25 09:59:15 kernel: [ 1.554157] pstore: Registered efi as persistent store backend Mar 25 09:59:15 kernel: [ 1.560798] PCI: Using ACPI for IRQ routing Mar 25 09:59:15 kernel: [ 1.593634] PCI: pci_cache_line_size set to 64 bytes Mar 25 09:59:15 kernel: [ 1.599348] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff] Mar 25 09:59:15 kernel: [ 1.606187] e820: reserve RAM buffer [mem 0x7ce70000-0x7fffffff] Mar 25 09:59:15 kernel: [ 1.613018] e820: reserve RAM buffer [mem 0x7ec4f000-0x7fffffff] Mar 25 09:59:15 kernel: [ 1.619859] e820: reserve RAM buffer [mem 0x47f000000-0x47fffffff] Mar 25 09:59:15 kernel: [ 1.627026] clocksource: Switched to clocksource hpet Mar 25 09:59:15 kernel: [ 1.637563] AppArmor: AppArmor Filesystem Enabled Mar 25 09:59:15 kernel: [ 1.643245] pnp: PnP ACPI init Mar 25 09:59:15 kernel: [ 1.647210] system 00:00: [io 0x0a00-0x0a0f] has been reserved Mar 25 09:59:15 kernel: [ 1.654219] system 00:00: [io 0x0a10-0x0a1f] has been reserved Mar 25 09:59:15 kernel: [ 1.661176] system 00:00: [io 0x0a20-0x0a2f] has been reserved Mar 25 09:59:15 kernel: [ 1.668216] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) Mar 25 09:59:15 kernel: [ 1.676203] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) Mar 25 09:59:15 kernel: [ 1.684849] system 00:02: [io 0x0680-0x069f] has been reserved Mar 25 09:59:15 kernel: [ 1.691817] system 00:02: [io 0x164e-0x164f] has been reserved Mar 25 09:59:15 kernel: [ 1.698798] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) Mar 25 09:59:15 kernel: [ 1.706830] system 00:03: [io 0x1854-0x1857] has been reserved Mar 25 09:59:15 kernel: [ 1.713750] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) Mar 25 09:59:15 kernel: [ 1.722599] system 00:04: [mem 0xfd000000-0xfdabffff] has been reserved Mar 25 09:59:15 kernel: [ 1.730312] system 00:04: [mem 0xfdad0000-0xfdadffff] has been reserved Mar 25 09:59:15 kernel: [ 1.737946] system 00:04: [mem 0xfdb00000-0xfdffffff] has been reserved Mar 25 09:59:15 kernel: [ 1.745631] system 00:04: [mem 0xfe000000-0xfe01ffff] could not be reserved Mar 25 09:59:15 kernel: [ 1.753830] system 00:04: [mem 0xfe036000-0xfe03bfff] has been reserved Mar 25 09:59:15 kernel: [ 1.761646] system 00:04: [mem 0xfe03d000-0xfe3fffff] has been reserved Mar 25 09:59:15 kernel: [ 1.769419] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) Mar 25 09:59:15 kernel: [ 1.777529] system 00:05: [io 0x2000-0x20fe] has been reserved Mar 25 09:59:15 kernel: [ 1.784440] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) Mar 25 09:59:15 kernel: [ 1.792807] system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved Mar 25 09:59:15 kernel: [ 1.800637] system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved Mar 25 09:59:15 kernel: [ 1.808244] system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved Mar 25 09:59:15 kernel: [ 1.815954] system 00:06: [mem 0xe0000000-0xefffffff] has been reserved Mar 25 09:59:15 kernel: [ 1.823648] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved Mar 25 09:59:15 kernel: [ 1.831429] system 00:06: [mem 0xfed90000-0xfed93fff] has been reserved Mar 25 09:59:15 kernel: [ 1.839254] system 00:06: [mem 0xfed45000-0xfed8ffff] has been reserved Mar 25 09:59:15 kernel: [ 1.846920] system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved Mar 25 09:59:15 kernel: [ 1.855017] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) Mar 25 09:59:15 kernel: [ 1.863189] system 00:07: [mem 0xfe038000-0xfe038fff] has been reserved Mar 25 09:59:15 kernel: [ 1.870920] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) Mar 25 09:59:15 kernel: [ 1.879214] pnp: PnP ACPI: found 8 devices Mar 25 09:59:15 kernel: [ 1.892873] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns Mar 25 09:59:15 kernel: [ 1.903222] pci 0000:00:01.0: PCI bridge to [bus 01] Mar 25 09:59:15 kernel: [ 1.908917] pci 0000:00:01.0: bridge window [io 0x4000-0x4fff] Mar 25 09:59:15 kernel: [ 1.915907] pci 0000:00:01.0: bridge window [mem 0x81000000-0x820fffff] Mar 25 09:59:15 kernel: [ 1.923687] pci 0000:00:01.0: bridge window [mem 0x4000000000-0x4009ffffff 64bit pref] Mar 25 09:59:15 kernel: [ 1.932985] pci 0000:00:1b.0: PCI bridge to [bus 02] Mar 25 09:59:15 kernel: [ 1.938701] pci 0000:00:1b.0: bridge window [mem 0x82200000-0x822fffff] Mar 25 09:59:15 kernel: [ 1.946494] pci 0000:00:1c.0: PCI bridge to [bus 03] Mar 25 09:59:15 kernel: [ 1.952242] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff] Mar 25 09:59:15 kernel: [ 1.959222] pci 0000:00:1c.0: bridge window [mem 0x82100000-0x821fffff] Mar 25 09:59:15 kernel: [ 1.966996] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] Mar 25 09:59:15 kernel: [ 1.974198] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] Mar 25 09:59:15 kernel: [ 1.981326] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] Mar 25 09:59:15 kernel: [ 1.989206] pci_bus 0000:00: resource 7 [mem 0x000e0000-0x000e3fff window] Mar 25 09:59:15 kernel: [ 1.997195] pci_bus 0000:00: resource 8 [mem 0x000e4000-0x000e7fff window] Mar 25 09:59:15 kernel: [ 2.005160] pci_bus 0000:00: resource 9 [mem 0x000e8000-0x000ebfff window] Mar 25 09:59:15 kernel: [ 2.013173] pci_bus 0000:00: resource 10 [mem 0x000ec000-0x000effff window] Mar 25 09:59:15 kernel: [ 2.021226] pci_bus 0000:00: resource 11 [mem 0x000f0000-0x000fffff window] Mar 25 09:59:15 kernel: [ 2.029235] pci_bus 0000:00: resource 12 [mem 0x80000000-0xdfffffff window] Mar 25 09:59:15 kernel: [ 2.037252] pci_bus 0000:00: resource 13 [mem 0x4000000000-0x7fffffffff window] Mar 25 09:59:15 kernel: [ 2.045624] pci_bus 0000:00: resource 14 [mem 0xfc800000-0xfe7fffff window] Mar 25 09:59:15 kernel: [ 2.053580] pci_bus 0000:01: resource 0 [io 0x4000-0x4fff] Mar 25 09:59:15 kernel: [ 2.059985] pci_bus 0000:01: resource 1 [mem 0x81000000-0x820fffff] Mar 25 09:59:15 kernel: [ 2.067217] pci_bus 0000:01: resource 2 [mem 0x4000000000-0x4009ffffff 64bit pref] Mar 25 09:59:15 kernel: [ 2.075880] pci_bus 0000:02: resource 1 [mem 0x82200000-0x822fffff] Mar 25 09:59:15 kernel: [ 2.083198] pci_bus 0000:03: resource 0 [io 0x3000-0x3fff] Mar 25 09:59:15 kernel: [ 2.089595] pci_bus 0000:03: resource 1 [mem 0x82100000-0x821fffff] Mar 25 09:59:15 kernel: [ 2.096825] NET: Registered protocol family 2 Mar 25 09:59:15 kernel: [ 2.101881] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) Mar 25 09:59:15 kernel: [ 2.110519] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) Mar 25 09:59:15 kernel: [ 2.118304] TCP: Hash tables configured (established 131072 bind 65536) Mar 25 09:59:15 kernel: [ 2.125903] UDP hash table entries: 8192 (order: 6, 262144 bytes) Mar 25 09:59:15 kernel: [ 2.132921] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes) Mar 25 09:59:15 kernel: [ 2.140460] NET: Registered protocol family 1 Mar 25 09:59:15 kernel: [ 2.145565] pci 0000:01:00.0: Video device with shadowed ROM Mar 25 09:59:15 kernel: [ 2.152365] PCI: CLS 64 bytes, default 64 Mar 25 09:59:15 kernel: [ 2.444011] Trying to unpack rootfs image as initramfs... Mar 25 09:59:15 kernel: [ 2.457508] Freeing initrd memory: 17456K Mar 25 09:59:15 kernel: [ 2.462811] redpill: loading out-of-tree module taints kernel. Mar 25 09:59:15 kernel: [ 2.469430] redpill: module verification failed: signature and/or required key missing - tainting kernel Mar 25 09:59:15 kernel: [ 2.497829] PCI host bridge to bus 0001:01 Mar 25 09:59:15 kernel: [ 2.502540] pci_bus 0001:01: root bus resource [io 0x0000-0xffff] Mar 25 09:59:15 kernel: [ 2.509571] pci_bus 0001:01: root bus resource [mem 0x00000000-0x7fffffffff] Mar 25 09:59:15 kernel: [ 2.517553] pci_bus 0001:01: root bus resource [bus 00-ff] Mar 25 09:59:15 kernel: [ 2.523787] pci 0001:01:00.0: [1b4b:9215] type 00 class 0x010601 Mar 25 09:59:15 kernel: [ 2.530612] pci 0001:01:00.0: Can't map mv9235 registers Mar 25 09:59:15 kernel: [ 2.536665] PCI host bridge to bus 0001:02 Mar 25 09:59:15 kernel: [ 2.541342] pci_bus 0001:02: root bus resource [io 0x0000-0xffff] Mar 25 09:59:15 kernel: [ 2.548365] pci_bus 0001:02: root bus resource [mem 0x00000000-0x7fffffffff] Mar 25 09:59:15 kernel: [ 2.556382] pci_bus 0001:02: busn_res: can not insert [bus 02-ff] under domain [bus 00-ff] (conflicts with (null) [bus 01-ff]) Mar 25 09:59:15 kernel: [ 2.569331] pci_bus 0001:02: root bus resource [bus 00-ff] Mar 25 09:59:15 kernel: [ 2.575528] pci 0001:02:00.0: [8086:1539] type 00 class 0x020000 Mar 25 09:59:15 kernel: [ 2.582359] PCI host bridge to bus 0001:03 Mar 25 09:59:15 kernel: [ 2.587105] pci_bus 0001:03: root bus resource [io 0x0000-0xffff] Mar 25 09:59:15 kernel: [ 2.594106] pci_bus 0001:03: root bus resource [mem 0x00000000-0x7fffffffff] Mar 25 09:59:15 kernel: [ 2.602128] pci_bus 0001:03: busn_res: can not insert [bus 03-ff] under domain [bus 00-ff] (conflicts with (null) [bus 01-ff]) Mar 25 09:59:15 kernel: [ 2.615074] pci_bus 0001:03: root bus resource [bus 00-ff] Mar 25 09:59:15 kernel: [ 2.621293] pci 0001:03:00.0: [8086:1539] type 00 class 0x020000 Mar 25 09:59:15 kernel: [ 2.628169] PCI host bridge to bus 0001:00 Mar 25 09:59:15 kernel: [ 2.632864] pci_bus 0001:00: root bus resource [io 0x0000-0xffff] Mar 25 09:59:15 kernel: [ 2.639853] pci_bus 0001:00: root bus resource [mem 0x00000000-0x7fffffffff] Mar 25 09:59:15 kernel: [ 2.647861] pci_bus 0001:00: busn_res: can not insert [bus 00-ff] under domain [bus 00-ff] (conflicts with (null) [bus 01-ff]) Mar 25 09:59:15 kernel: [ 2.660809] pci_bus 0001:00: root bus resource [bus 00-ff] Mar 25 09:59:15 kernel: [ 2.667024] pci 0001:00:12.0: [8086:5ae3] type 00 class 0x010601 Mar 25 09:59:15 kernel: [ 2.673855] pci 0001:00:13.0: [8086:5ad8] type 00 class 0x060400 Mar 25 09:59:15 kernel: [ 2.680695] pci 0001:00:13.0: ignoring class 0x060400 (doesn't match header type 00) Mar 25 09:59:15 kernel: [ 2.689494] pci 0001:00:14.0: [8086:5ad6] type 00 class 0x060400 Mar 25 09:59:15 kernel: [ 2.696336] pci 0001:00:14.0: ignoring class 0x060400 (doesn't match header type 00) Mar 25 09:59:15 kernel: [ 2.705143] pci 0001:00:15.0: [8086:5aa8] type 00 class 0x0c0330 Mar 25 09:59:15 kernel: [ 2.711970] pci 0001:00:16.0: [8086:5aac] type 00 class 0x118000 Mar 25 09:59:15 kernel: [ 2.718844] pci 0001:00:18.0: [8086:5abc] type 00 class 0x118000 Mar 25 09:59:15 kernel: [ 2.725703] pci 0001:00:19.0: [8086:5ac6] type 00 class 0x118000 Mar 25 09:59:15 kernel: [ 2.732563] pci 0001:00:19.2: [8086:5ac6] type 00 class 0x118000 Mar 25 09:59:15 kernel: [ 2.739428] pci 0001:00:1f.0: [8086:5ad4] type 00 class 0x0c0500 Mar 25 09:59:15 kernel: [ 2.746314] pci 0001:00:1f.1: [8086:5ad4] type 00 class 0x0c0500 Mar 25 09:59:15 kernel: [ 2.761983] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) Mar 25 09:59:15 kernel: [ 2.769385] software IO TLB: mapped [mem 0x72a02000-0x76a02000] (64MB) Mar 25 09:59:15 kernel: [ 2.776842] platform rtc_cmos: registered platform RTC device (no PNP device found) Mar 25 09:59:15 kernel: [ 2.786629] audit: initializing netlink subsys (disabled) Mar 25 09:59:15 kernel: [ 2.792854] audit: type=2000 audit(1648202347.537:1): initialized Mar 25 09:59:15 kernel: [ 2.800195] Initialise system trusted keyring Mar 25 09:59:15 kernel: [ 2.807827] VFS: Disk quotas dquot_6.6.0 Mar 25 09:59:15 kernel: [ 2.812502] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) Mar 25 09:59:15 kernel: [ 2.845929] Key type asymmetric registered Mar 25 09:59:15 kernel: [ 2.850720] Asymmetric key parser 'x509' registered Mar 25 09:59:15 kernel: [ 2.856491] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) Mar 25 09:59:15 kernel: [ 2.865203] io scheduler noop registered Mar 25 09:59:15 kernel: [ 2.869846] io scheduler deadline registered Mar 25 09:59:15 kernel: [ 2.874829] io scheduler cfq registered (default) Mar 25 09:59:15 kernel: [ 2.914370] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled Mar 25 09:59:15 kernel: [ 2.942567] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A Mar 25 09:59:15 kernel: [ 2.951648] console [ttyS0] enabled Mar 25 09:59:15 kernel: [ 2.959372] bootconsole [uart0] disabled Mar 25 09:59:15 kernel: [ 3.057619] serial8250: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A Mar 25 09:59:15 kernel: [ 3.065988] serial 0000:03:00.0: enabling device (0000 -> 0003) Mar 25 09:59:15 kernel: [ 3.094249] 0000:03:00.0: ttyS2 at I/O 0x3030 (irq = 18, base_baud = 115200) is a ST16650V2 Mar 25 09:59:15 kernel: [ 3.103330] serial 0000:03:00.1: enabling device (0000 -> 0003) Mar 25 09:59:15 kernel: [ 3.131458] 0000:03:00.1: ttyS3 at I/O 0x3020 (irq = 19, base_baud = 115200) is a ST16650V2 Mar 25 09:59:15 kernel: [ 3.140384] serial 0000:03:00.2: enabling device (0000 -> 0003) Mar 25 09:59:15 kernel: [ 3.146621] serial 0000:03:00.2: Couldn't register serial port 3010, irq 16, type 0, error -28 Mar 25 09:59:15 kernel: [ 3.155573] serial 0000:03:00.3: enabling device (0000 -> 0003) Mar 25 09:59:15 kernel: [ 3.161756] serial 0000:03:00.3: Couldn't register serial port 3000, irq 17, type 0, error -28 Mar 25 09:59:15 kernel: [ 3.170659] Linux agpgart interface v0.103 Mar 25 09:59:15 kernel: [ 3.179029] brd: module loaded Mar 25 09:59:15 kernel: [ 3.182308] intel-lpss: probe of 0001:00:16.0 failed with error -22 Mar 25 09:59:15 kernel: [ 3.188880] intel-lpss: probe of 0001:00:18.0 failed with error -22 Mar 25 09:59:15 kernel: [ 3.195558] intel-lpss: probe of 0001:00:19.0 failed with error -22 Mar 25 09:59:15 kernel: [ 3.202302] intel-lpss: probe of 0001:00:19.2 failed with error -22 Mar 25 09:59:15 kernel: [ 3.208962] Loading iSCSI transport class v2.0-870. Mar 25 09:59:15 kernel: [ 3.214554] ahci 0000:00:17.0: version 3.0 Mar 25 09:59:15 kernel: [ 3.219271] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 6 ports 6 Gbps 0x3f impl SATA mode Mar 25 09:59:15 kernel: [ 3.227915] ahci 0000:00:17.0: flags: 64bit ncq sntf led clo only pio slum part ems deso sadm sds apst Mar 25 09:59:15 kernel: [ 3.248374] scsi host0: ahci Mar 25 09:59:15 kernel: [ 3.252295] scsi host1: ahci Mar 25 09:59:15 kernel: [ 3.255527] scsi host2: ahci Mar 25 09:59:15 kernel: [ 3.258784] scsi host3: ahci Mar 25 09:59:15 kernel: [ 3.262043] scsi host4: ahci Mar 25 09:59:15 kernel: [ 3.265364] scsi host5: ahci Mar 25 09:59:15 kernel: [ 3.268464] ata1: SATA max UDMA/133 abar m2048@0x82326000 port 0x82326100 irq 121 Mar 25 09:59:15 kernel: [ 3.276402] ata2: SATA max UDMA/133 abar m2048@0x82326000 port 0x82326180 irq 121 Mar 25 09:59:15 kernel: [ 3.284271] ata3: SATA max UDMA/133 abar m2048@0x82326000 port 0x82326200 irq 121 Mar 25 09:59:15 kernel: [ 3.292210] ata4: SATA max UDMA/133 abar m2048@0x82326000 port 0x82326280 irq 121 Mar 25 09:59:15 kernel: [ 3.300025] ata5: SATA max UDMA/133 abar m2048@0x82326000 port 0x82326300 irq 121 Mar 25 09:59:15 kernel: [ 3.307901] ata6: SATA max UDMA/133 abar m2048@0x82326000 port 0x82326380 irq 121 Mar 25 09:59:15 kernel: [ 3.620105] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Mar 25 09:59:15 kernel: [ 3.627300] ata1.00: HPA detected: current 976771055, native 976773168 Mar 25 09:59:15 kernel: [ 3.634082] ata1.00: ATA-8: WDC WD5001AALS-00L3B2, 01.03B01, max UDMA/133 Mar 25 09:59:15 kernel: [ 3.641043] ata1.00: 976771055 sectors, multi 16: LBA48 NCQ (depth 31/32), AA Mar 25 09:59:15 kernel: [ 3.648372] ata1.00: SN: WD-WCASY7743694 Mar 25 09:59:15 kernel: [ 3.653785] ata1.00: configured for UDMA/133 Mar 25 09:59:15 kernel: [ 3.659237] scsi 0:0:0:0: Direct-Access WDC WD5001AALS-00L3B2 3B01 PQ: 0 ANSI: 5 Mar 25 09:59:15 kernel: [ 3.668527] sd 0:0:0:0: [sda] 976771055 512-byte logical blocks: (500 GB/466 GiB) Mar 25 09:59:15 kernel: [ 3.676589] sd 0:0:0:0: [sda] Write Protect is off Mar 25 09:59:15 kernel: [ 3.681700] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 Mar 25 09:59:15 kernel: [ 3.687278] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Mar 25 09:59:15 kernel: [ 3.704520] sda: Mar 25 09:59:15 kernel: [ 3.706795] sd 0:0:0:0: [sda] Attached SCSI disk Mar 25 09:59:15 kernel: [ 3.786108] tsc: Refined TSC clocksource calibration: 3600.006 MHz Mar 25 09:59:15 kernel: [ 3.792468] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x33e458e6624, max_idle_ns: 440795259572 ns Mar 25 09:59:15 kernel: [ 3.973111] ata2: SATA link down (SStatus 0 SControl 300) Mar 25 09:59:15 kernel: [ 3.978665] ata2: No present pin info for SATA link down event Mar 25 09:59:15 kernel: [ 4.291118] ata3: SATA link down (SStatus 0 SControl 300) Mar 25 09:59:15 kernel: [ 4.296672] ata3: No present pin info for SATA link down event Mar 25 09:59:15 kernel: [ 4.607125] ata4: SATA link down (SStatus 0 SControl 300) Mar 25 09:59:15 kernel: [ 4.612689] ata4: No present pin info for SATA link down event Mar 25 09:59:15 kernel: [ 4.802340] clocksource: Switched to clocksource tsc Mar 25 09:59:15 kernel: [ 4.925102] ata5: SATA link down (SStatus 0 SControl 300) Mar 25 09:59:15 kernel: [ 4.930636] ata5: No present pin info for SATA link down event Mar 25 09:59:15 kernel: [ 5.241110] ata6: SATA link down (SStatus 0 SControl 300) Mar 25 09:59:15 kernel: [ 5.246630] ata6: No present pin info for SATA link down event Mar 25 09:59:15 kernel: [ 5.254126] ahci: probe of 0001:01:00.0 failed with error -22 Mar 25 09:59:15 kernel: [ 5.260006] ahci: probe of 0001:00:12.0 failed with error -22 Mar 25 09:59:15 kernel: [ 5.265969] i2c /dev entries driver Mar 25 09:59:15 kernel: [ 5.269576] i801_smbus 0001:00:1f.0: SMBus base address uninitialized, upgrade BIOS Mar 25 09:59:15 kernel: [ 5.277414] i801_smbus 0001:00:1f.1: SMBus base address uninitialized, upgrade BIOS Mar 25 09:59:15 kernel: [ 5.285322] md: raid1 personality registered for level 1 Mar 25 09:59:15 kernel: [ 5.290832] NET: Registered protocol family 17 Mar 25 09:59:15 kernel: [ 5.295383] Key type dns_resolver registered Mar 25 09:59:15 kernel: [ 5.300335] mce: Using 10 MCE banks Mar 25 09:59:15 kernel: [ 5.303990] registered taskstats version 1 Mar 25 09:59:15 kernel: [ 5.308204] Loading compiled-in untrusted X.509 certificates Mar 25 09:59:15 kernel: [ 5.314022] Loading compiled-in X.509 certificates Mar 25 09:59:15 kernel: [ 5.318939] Loaded X.509 cert 'Synology SDG kernel module signing key: 7bd0b0d6bcd31651c22ce3978bdc8c8bdc417329' Mar 25 09:59:15 kernel: [ 5.329815] Loaded X.509 cert 'Synology Root Certification Authority: f2c075361f168425f8b5ef31b796406c3aab2089' Mar 25 09:59:15 kernel: [ 5.340145] Loaded X.509 cert 'Synology Kernel Module Signing Certification Authority: 600839b5d127e0e11d817a31f0575d323a7c0e28' Mar 25 09:59:15 kernel: [ 5.352004] Loaded X.509 cert 'Synology kernel module signing key: 4646ce54489669338118a3b1286da156ac366fa5' Mar 25 09:59:15 kernel: [ 5.362069] page_owner is disabled Mar 25 09:59:15 kernel: [ 5.365550] AppArmor: AppArmor sha1 policy hashing enabled Mar 25 09:59:15 kernel: [ 5.371727] hctosys: unable to open rtc device (rtc0) Mar 25 09:59:15 kernel: [ 5.377498] Freeing unused kernel memory: 916K Mar 25 09:59:15 kernel: [ 5.382055] Write protecting the kernel read-only data: 8192k Mar 25 09:59:15 kernel: [ 5.388044] Freeing unused kernel memory: 508K Mar 25 09:59:15 kernel: [ 5.392944] Freeing unused kernel memory: 300K Mar 25 09:59:15 kernel: [ 5.422567] ACPI: bus type USB registered Mar 25 09:59:15 kernel: [ 5.426705] usbcore: registered new interface driver usbfs Mar 25 09:59:15 kernel: [ 5.432343] usbcore: registered new interface driver hub Mar 25 09:59:15 kernel: [ 5.437791] usbcore: registered new interface driver ethub Mar 25 09:59:15 kernel: [ 5.443433] usbcore: registered new device driver usb Mar 25 09:59:15 kernel: [ 5.456760] xhci_hcd 0000:00:14.0: xHCI Host Controller Mar 25 09:59:15 kernel: [ 5.462101] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1 Mar 25 09:59:15 kernel: [ 5.670783] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009010 Mar 25 09:59:15 kernel: [ 5.679444] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported Mar 25 09:59:15 kernel: [ 5.686555] hub 1-0:1.0: USB hub found Mar 25 09:59:15 kernel: [ 5.690461] hub 1-0:1.0: 12 ports detected Mar 25 09:59:15 kernel: [ 5.695261] xhci_hcd 0000:00:14.0: xHCI Host Controller Mar 25 09:59:15 kernel: [ 5.700624] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 Mar 25 09:59:15 kernel: [ 5.708240] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. Mar 25 09:59:15 kernel: [ 5.716603] hub 2-0:1.0: USB hub found Mar 25 09:59:15 kernel: [ 5.720458] hub 2-0:1.0: 8 ports detected Mar 25 09:59:15 kernel: [ 5.725065] xhci_hcd 0000:02:00.0: xHCI Host Controller Mar 25 09:59:15 kernel: [ 5.730422] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 3 Mar 25 09:59:15 kernel: [ 5.938069] xhci_hcd 0000:02:00.0: hcc params 0x0200ef81 hci version 0x110 quirks 0x00000010 Mar 25 09:59:15 kernel: [ 5.946883] hub 3-0:1.0: USB hub found Mar 25 09:59:15 kernel: [ 5.950731] hub 3-0:1.0: 1 port detected Mar 25 09:59:15 kernel: [ 5.954837] xhci_hcd 0000:02:00.0: xHCI Host Controller Mar 25 09:59:15 kernel: [ 5.960222] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 4 Mar 25 09:59:15 kernel: [ 5.967809] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. Mar 25 09:59:15 kernel: [ 5.976188] hub 4-0:1.0: USB hub found Mar 25 09:59:15 kernel: [ 5.980066] hub 4-0:1.0: 1 port detected Mar 25 09:59:15 kernel: [ 5.984141] xhci_hcd 0001:00:15.0: init 0001:00:15.0 fail, -16 Mar 25 09:59:15 kernel: [ 5.990130] xhci_hcd: probe of 0001:00:15.0 failed with error -16 Mar 25 09:59:15 kernel: [ 6.002645] usbcore: registered new interface driver usb-storage Mar 25 09:59:15 kernel: [ 6.012457] e1000e: Intel(R) PRO/1000 Network Driver - 3.8.4-NAPI Mar 25 09:59:15 kernel: [ 6.018125] usb 1-1: new high-speed USB device number 2 using xhci_hcd Mar 25 09:59:15 kernel: [ 6.025383] e1000e: Copyright(c) 1999 - 2020 Intel Corporation. Mar 25 09:59:15 kernel: [ 6.031439] e1000e 0000:00:1f.6: enabling device (0000 -> 0002) Mar 25 09:59:15 kernel: [ 6.037633] e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode Mar 25 09:59:15 kernel: [ 6.153361] Got empty serial number. Generate serial number from product. Mar 25 09:59:15 kernel: [ 6.160703] hub 1-1:1.0: USB hub found Mar 25 09:59:15 kernel: [ 6.164799] hub 1-1:1.0: 4 ports detected Mar 25 09:59:15 kernel: [ 6.293128] usb 1-6: new low-speed USB device number 3 using xhci_hcd Mar 25 09:59:15 kernel: [ 6.345141] e1000e 0000:00:1f.6 eth0: (PCI Express:2.5GT/s:Width x1) d8:bb:c1:1c:c5:ea Mar 25 09:59:15 kernel: [ 6.353240] e1000e 0000:00:1f.6 eth0: Intel(R) PRO/1000 Network Connection Mar 25 09:59:15 kernel: [ 6.360338] e1000e 0000:00:1f.6 eth0: MAC: 13, PHY: 12, PBA No: FFFFFF-0FF Mar 25 09:59:15 kernel: [ 6.439666] Got empty serial number. Generate serial number from product. Mar 25 09:59:15 kernel: [ 6.446651] usb 1-6: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes Mar 25 09:59:15 kernel: [ 6.578136] usb 1-10: new full-speed USB device number 4 using xhci_hcd Mar 25 09:59:15 kernel: [ 6.718775] usb 1-10: ep 0x81 - rounding interval to 32 microframes, ep desc says 40 microframes Mar 25 09:59:15 kernel: [ 6.727785] usb 1-10: ep 0x2 - rounding interval to 32 microframes, ep desc says 40 microframes Mar 25 09:59:15 kernel: [ 6.859142] usb 1-11: new high-speed USB device number 5 using xhci_hcd Mar 25 09:59:15 kernel: [ 7.008305] usb-storage 1-11:1.0: USB Mass Storage device detected Mar 25 09:59:15 kernel: [ 7.014668] scsi host6: usb-storage 1-11:1.0 Mar 25 09:59:15 kernel: [ 8.024336] scsi 6:0:0:0: Direct-Access Generic Flash Disk 8.07 PQ: 0 ANSI: 4 Mar 25 09:59:15 kernel: [ 8.034050] sd 6:0:0:0: [synoboot] 30310400 512-byte logical blocks: (15.5 GB/14.5 GiB) Mar 25 09:59:15 kernel: [ 8.042921] sd 6:0:0:0: [synoboot] Write Protect is off Mar 25 09:59:15 kernel: [ 8.048289] sd 6:0:0:0: [synoboot] Mode Sense: 23 00 00 00 Mar 25 09:59:15 kernel: [ 8.054544] sd 6:0:0:0: [synoboot] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA Mar 25 09:59:15 kernel: [ 8.067885] synoboot: synoboot1 synoboot2 synoboot3 Mar 25 09:59:15 kernel: [ 8.074823] sd 6:0:0:0: [synoboot] Attached SCSI removable disk Mar 25 09:59:15 kernel: [ 8.381598] apollolake_synobios: module license 'Synology Inc.' taints kernel. Mar 25 09:59:15 kernel: [ 8.388993] Disabling lock debugging due to kernel taint Mar 25 09:59:15 kernel: [ 8.397263] synobios open /dev/ttyS1 success Mar 25 09:59:15 kernel: [ 8.401626] WARNING: inconsistent syno gpio info, hdd detect Mar 25 09:59:15 kernel: [ 8.407546] 2022-3-25 9:59:13 UTC Mar 25 09:59:15 kernel: [ 8.410940] synobios: load, major number 201 Mar 25 09:59:15 kernel: [ 8.415314] Brand: Synology Mar 25 09:59:15 kernel: [ 8.418163] Model: DS-918+ Mar 25 09:59:15 kernel: [ 8.420953] This is default settings: set group disks wakeup number to 1, spinup time deno 1 Mar 25 09:59:15 kernel: [ 8.429640] synobios cpu_arch proc entry initialized Mar 25 09:59:15 kernel: [ 8.434722] synobios crypto_hw proc entry initialized Mar 25 09:59:15 kernel: [ 8.439888] synobios syno_platform proc entry initialized Mar 25 09:59:15 kernel: [ 8.447447] Module [apollolake_synobios] is removed. Mar 25 09:59:15 kernel: [ 8.452628] synobios: unload Mar 25 09:59:15 kernel: [ 8.587612] random: syno_swap_ctl: uninitialized urandom read (4 bytes read, 56 bits of entropy available) Mar 25 09:59:15 kernel: [ 8.645390] Intel(R) Gigabit Ethernet Linux Driver - version 5.3.5.22 Mar 25 09:59:15 kernel: [ 8.651994] Copyright(c) 2007 - 2018 Intel Corporation. Mar 25 09:59:15 kernel: [ 8.657376] igb: probe of 0001:02:00.0 failed with error -5 Mar 25 09:59:15 kernel: [ 8.663102] igb: probe of 0001:03:00.0 failed with error -5 Mar 25 09:59:15 kernel: [ 8.680946] RPC: Registered named UNIX socket transport module. Mar 25 09:59:15 kernel: [ 8.687036] RPC: Registered udp transport module. Mar 25 09:59:15 kernel: [ 8.691833] RPC: Registered tcp transport module. Mar 25 09:59:15 kernel: [ 8.696679] RPC: Registered tcp NFSv4.1 backchannel transport module. Mar 25 09:59:15 kernel: [ 8.720053] synobios open /dev/ttyS1 success Mar 25 09:59:15 kernel: [ 8.724414] WARNING: inconsistent syno gpio info, hdd detect Mar 25 09:59:15 kernel: [ 8.730333] 2022-3-25 9:59:13 UTC Mar 25 09:59:15 kernel: [ 8.733729] synobios: load, major number 201 Mar 25 09:59:15 kernel: [ 8.738095] Brand: Synology Mar 25 09:59:15 kernel: [ 8.740962] Model: DS-918+ Mar 25 09:59:15 kernel: [ 8.743766] This is default settings: set group disks wakeup number to 1, spinup time deno 1 Mar 25 09:59:15 kernel: [ 8.752420] synobios cpu_arch proc entry initialized Mar 25 09:59:15 kernel: [ 8.757509] synobios crypto_hw proc entry initialized Mar 25 09:59:15 kernel: [ 8.762686] synobios syno_platform proc entry initialized Mar 25 09:59:15 kernel: [ 9.371145] Module [apollolake_synobios] is removed. Mar 25 09:59:15 kernel: [ 9.376340] synobios: unload Mar 25 09:59:15 kernel: [ 9.400809] synobios open /dev/ttyS1 success Mar 25 09:59:15 kernel: [ 9.405215] WARNING: inconsistent syno gpio info, hdd detect Mar 25 09:59:15 kernel: [ 9.411132] 2022-3-25 9:59:14 UTC Mar 25 09:59:15 kernel: [ 9.414519] synobios: load, major number 201 Mar 25 09:59:15 kernel: [ 9.418902] Brand: Synology Mar 25 09:59:15 kernel: [ 9.421787] Model: DS-918+ Mar 25 09:59:15 kernel: [ 9.424548] This is default settings: set group disks wakeup number to 1, spinup time deno 1 Mar 25 09:59:15 kernel: [ 9.433246] synobios cpu_arch proc entry initialized Mar 25 09:59:15 kernel: [ 9.438326] synobios crypto_hw proc entry initialized Mar 25 09:59:15 kernel: [ 9.443512] synobios syno_platform proc entry initialized Mar 25 09:59:15 scemd: scemd.c:805(main) start scemd Mar 25 09:59:19 kernel: [ 14.662813] e1000e 0000:00:1f.6 eth0: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None Mar 25 09:59:19 udhcpc: networking/udhcp/synoether.c (172) MAC address of interface eth0 is [00:11:32:37:66:c2] Mar 25 09:59:19 udhcpc: networking/udhcp/synoether.c (280) Broadcasting ARPOP_REQUEST for 169.254.198.239 Mar 25 09:59:22 findhostd: partition_check_layout.c:173 sda: dont contain partition [1] Mar 25 09:59:22 findhostd: partition_check_layout.c:173 sda: dont contain partition [2] Mar 25 09:59:22 findhostd: ninstaller.c:678 Dev: sda, DiskPath: /dev/sda, Partition version: [not syno partition] Mar 25 09:59:22 findhostd: ninstaller.c:1146 SYSTEM_NOT_INSTALLED: Raid but md0 or md1 not exist Mar 25 09:59:22 findhostd: ninstaller.c:1214 SYSTEM_NOT_INSTALLED: Not SynoParitition and Not Recoverable Mar 25 09:59:22 findhostd: ninstaller.c:1114(FillUpgradeVolumeInfo): gszUpgradeVolDev = /dev/md0 Mar 25 09:59:22 findhostd: ninstaller.c:1115(FillUpgradeVolumeInfo): gszUpgradeVolMnt = /tmpData Mar 25 09:59:22 findhostd: ninstaller.c:1223 gblSupportRaid: 1, gSysStatus: 3, gblCreateDataVol: 0, gblSystemRecoverable: 0 Mar 25 09:59:30 synoagentregisterd: synoagentregisterd.c:129 Generating register key... Mar 25 09:59:31 synoagentregisterd: synoagentregisterd.c:143 Generated register key [51AFE6CE.05E2.404A.8A1C.5AD34ED7C16E]. Mar 25 09:59:34 start_telnet.cgi: start_telnet.c:15 The remote addr is orz Jan 1 00:00:00 kernel: [ 31.042420] random: nonblocking pool is initialized Mar 25 09:59:51 synoupgrade: synoupgrade.c:267 Failed to get root partition version Mar 25 09:59:51 synoupgrade: synoupgrade.c:267 Failed to get root partition version Mar 25 09:59:51 synoupgrade: autocleanup/mount.c:19 run '/usr/bin/mount /dev/md0 /_disk' Mar 25 09:59:51 synoupgrade: autocleanup/mount.c:30 mount's exit status is non-zero, 255 Mar 25 09:59:51 synoupgrade: autocleanup/mount.c:72 mount point creation failed, so skip unmounting Mar 25 09:59:51 synoupgrade: autocleanup/directory.c:38 remove directory /_disk, result is 0 Mar 25 09:59:51 synoupgrade: synoupgrade.c:245 unable to get dsm version from disk device Mar 25 09:59:51 synoupgrade: synoupgrade.c:308 unable to append query string of disk dsm version Mar 25 09:59:52 synoupgrade: synoupgrade.c:267 Failed to get root partition version Mar 25 09:59:52 synoupgrade: partition_check_layout.c:173 sda: dont contain partition [1] Mar 25 09:59:52 synoupgrade: partition_check_layout.c:173 sda: dont contain partition [2] Mar 25 09:59:52 synoupgrade: ninstaller.c:678 Dev: sda, DiskPath: /dev/sda, Partition version: [not syno partition] Mar 25 09:59:52 synoupgrade: ninstaller.c:1146 SYSTEM_NOT_INSTALLED: Raid but md0 or md1 not exist Mar 25 09:59:52 synoupgrade: ninstaller.c:1214 SYSTEM_NOT_INSTALLED: Not SynoParitition and Not Recoverable Mar 25 09:59:52 synoupgrade: ninstaller.c:1114(FillUpgradeVolumeInfo): gszUpgradeVolDev = /dev/md0 Mar 25 09:59:52 synoupgrade: ninstaller.c:1115(FillUpgradeVolumeInfo): gszUpgradeVolMnt = /tmpData Mar 25 09:59:52 synoupgrade: ninstaller.c:1223 gblSupportRaid: 1, gSysStatus: 3, gblCreateDataVol: 0, gblSystemRecoverable: 0 Mar 25 10:00:09 login[6171]: root login on 'pts/0' Mar 25 10:00:30 synoupgrade: synoupgrade.c:267 Failed to get root partition version Mar 25 10:00:31 synoupgrade: synoupgrade.c:267 Failed to get root partition version Mar 25 10:00:31 synoupgrade: autocleanup/mount.c:19 run '/usr/bin/mount /dev/md0 /_disk' Mar 25 10:00:31 synoupgrade: autocleanup/mount.c:30 mount's exit status is non-zero, 255 Mar 25 10:00:31 synoupgrade: autocleanup/mount.c:72 mount point creation failed, so skip unmounting Mar 25 10:00:31 synoupgrade: autocleanup/directory.c:38 remove directory /_disk, result is 0 Mar 25 10:00:31 synoupgrade: synoupgrade.c:245 unable to get dsm version from disk device Mar 25 10:00:31 synoupgrade: synoupgrade.c:308 unable to append query string of disk dsm version Mar 25 10:00:31 synoupgrade: synoupgrade.c:267 Failed to get root partition version Mar 25 10:00:37 synoupgrade: synoupgrade.c:267 Failed to get root partition version Mar 25 10:00:38 synoupgrade: synoupgrade.c:267 Failed to get root partition version Mar 25 10:00:38 synoupgrade: autocleanup/mount.c:19 run '/usr/bin/mount /dev/md0 /_disk' Mar 25 10:00:38 synoupgrade: autocleanup/mount.c:30 mount's exit status is non-zero, 255 Mar 25 10:00:38 synoupgrade: autocleanup/mount.c:72 mount point creation failed, so skip unmounting Mar 25 10:00:38 synoupgrade: autocleanup/directory.c:38 remove directory /_disk, result is 0 Mar 25 10:00:38 synoupgrade: synoupgrade.c:245 unable to get dsm version from disk device Mar 25 10:00:38 synoupgrade: synoupgrade.c:308 unable to append query string of disk dsm version Mar 25 10:00:38 synoupgrade: synoupgrade.c:267 Failed to get root partition version Mar 25 10:00:39 install.cgi: install.c:520 Unknown param localinstallreq=false Mar 25 10:00:39 install.cgi: install.c:520 Unknown param _dc=1648202439412 Mar 25 10:00:39 install.cgi: partition_check_layout.c:173 sda: dont contain partition [1] Mar 25 10:00:39 install.cgi: partition_check_layout.c:173 sda: dont contain partition [2] Mar 25 10:00:39 install.cgi: ninstaller.c:678 Dev: sda, DiskPath: /dev/sda, Partition version: [not syno partition] Mar 25 10:00:39 install.cgi: ninstaller.c:1146 SYSTEM_NOT_INSTALLED: Raid but md0 or md1 not exist Mar 25 10:00:39 install.cgi: ninstaller.c:1214 SYSTEM_NOT_INSTALLED: Not SynoParitition and Not Recoverable Mar 25 10:00:39 install.cgi: ninstaller.c:1114(FillUpgradeVolumeInfo): gszUpgradeVolDev = /dev/md0 Mar 25 10:00:39 install.cgi: ninstaller.c:1115(FillUpgradeVolumeInfo): gszUpgradeVolMnt = /tmpData Mar 25 10:00:39 install.cgi: ninstaller.c:1223 gblSupportRaid: 1, gSysStatus: 3, gblCreateDataVol: 0, gblSystemRecoverable: 0 Mar 25 10:00:39 install.cgi: synoupgrade.c:762 system status = 3 Mar 25 10:00:39 install.cgi: ninstaller.c:1648 CreateDataVol=[0] Mar 25 10:00:39 install.cgi: ninstaller.c:152 umount partition /tmpData Mar 25 10:00:39 install.cgi: ninstaller.c:156 Fail to execute [/bin/umount -f /tmpData > /dev/null 2>&1] Mar 25 10:00:39 install.cgi: ninstaller.c:1660 installer cmd=[/usr/syno/sbin/installer.sh -r >> /tmp/installer_sh.log 2>&1] Mar 25 10:00:39 burnin: B1 not started Mar 25 10:00:39 syno_swap_ctl: swap/swap_off.c:20 swap/swap_off.c(20): failed to swapoff /dev/md1, ret = -1 Mar 25 10:00:39 raidtool: space_error_log.c:47 SpaceCommand:command="/sbin/sfdisk --fast-delete -1 /dev/sda" Error="" Mar 25 10:00:39 raidtool: space_error_log.c:47 SpaceCommand:command="/sbin/sfdisk -M1 /dev/sda" Error="" Mar 25 10:00:39 raidtool: space_error_log.c:47 SpaceCommand:command="/sbin/sfdisk -M1 /dev/sda" Error="" Mar 25 10:00:39 raidtool: space_error_log.c:47 SpaceCommand:command="/sbin/sfdisk -N1 -uS -q -f -j2048 -z4980480 -tfd -F /dev/sda" Error="" Mar 25 10:00:39 raidtool: space_error_log.c:47 SpaceCommand:command="/sbin/sfdisk -N2 -uS -q -f -j0 -z4194304 -tfd -F /dev/sda" Error="" Mar 25 10:00:42 synodiskport: external/external_disk_port_check.c:158 expected sdx or /dev/sdx, not md, not match any port type Mar 25 10:00:42 kernel: [ 98.226603] md: bind<sda1> Mar 25 10:00:42 kernel: [ 98.229504] md/raid1:md0: active with 1 out of 16 mirrors Mar 25 10:00:42 kernel: [ 98.243159] md0: detected capacity change from 0 to 2549940224 Mar 25 10:00:42 synodiskport: external/external_disk_port_check.c:158 expected sdx or /dev/sdx, not md, not match any port type Mar 25 10:00:45 synodiskport: external/external_disk_port_check.c:158 expected sdx or /dev/sdx, not md, not match any port type Mar 25 10:00:45 kernel: [ 101.283735] md: bind<sda2> Mar 25 10:00:45 kernel: [ 101.286617] md/raid1:md1: active with 1 out of 16 mirrors Mar 25 10:00:45 kernel: [ 101.300288] md1: detected capacity change from 0 to 2147418112 Mar 25 10:00:45 raidtool: raidtool.c:716 system inited on [/dev/sda1 ], [/dev/sda2 ] Mar 25 10:00:45 synodiskport: external/external_disk_port_check.c:158 expected sdx or /dev/sdx, not md, not match any port type Mar 25 10:00:46 kernel: [ 102.381258] EXT4-fs (md0): couldn't mount as ext3 due to feature incompatibilities Mar 25 10:00:46 kernel: [ 102.408740] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null) Mar 25 10:00:47 install.cgi: ninstaller.c:123 Mount partion /dev/md0 /tmpRoot Mar 25 10:00:47 kernel: [ 102.786553] EXT4-fs (md0): couldn't mount as ext3 due to feature incompatibilities Mar 25 10:00:47 install.cgi: ninstaller.c:152 umount partition /tmpRoot Mar 25 10:00:47 kernel: [ 102.808720] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null) Mar 25 10:00:47 install.cgi: ninstaller.c:1688 retv=[0] Mar 25 10:00:47 install.cgi: ninstaller.c:1689(ErrFHOSTDoFdiskFormat) retv=[0] Mar 25 10:00:47 install.cgi: ninstaller.c:123 Mount partion /dev/md0 /tmpData Mar 25 10:00:47 kernel: [ 102.827526] EXT4-fs (md0): couldn't mount as ext3 due to feature incompatibilities Mar 25 10:00:47 kernel: [ 102.842046] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null) Mar 25 10:01:02 install.cgi: synoupgrade.c:1342 Extracting VERSION from Old Patch Format [/tmpData/@autoupdate/upload.pat][/tmpData/@autoupdate] Mar 25 10:01:02 install.cgi: Remove /tmpData/upd@te...cmd=[/bin/rm -rf /tmpData/upd@te > /dev/null 2>&1] Mar 25 10:01:02 install.cgi: Create /tmpData/upd@te...cmd=[/bin/mkdir -p /tmpData/upd@te > /dev/null 2>&1] Mar 25 10:01:02 install.cgi: ninstaller.c:1299 Extracting Old Patch Format [/tmpData/upd@te.pat][/tmpData/upd@te] Mar 25 10:01:02 install.cgi: Untar /tmpData/upd@te.pat...cmd=[/bin/tar xpf "/tmpData/upd@te.pat" -C /tmpData/upd@te > /dev/null 2>&1] Mar 25 10:01:02 install.cgi: Verify codesign of [/tmpData/upd@te]... Mar 25 10:01:03 synocodesign: BLAKE2b-256 (VERSION) = 0d669baefc39bc4de77fb8549501f3888d8c303d53170dc7c74c23e3912314e1 Mar 25 10:01:03 synocodesign: VERSION: OK Mar 25 10:01:03 synocodesign: BLAKE2b-256 (zImage) = 6a1b2c1ac669d8fede0401ce679bb9048078406a0376c91a6255d2d6d4e0472a Mar 25 10:01:03 synocodesign: zImage: OK Mar 25 10:01:03 synocodesign: BLAKE2b-256 (updater) = 227500655d23fa5503ef338c443467d45f711bf740048e60fa461efe41cea522 Mar 25 10:01:03 synocodesign: updater: OK Mar 25 10:01:03 synocodesign: BLAKE2b-256 (GRUB_VER) = f04c3c49de90d20d820f6ec3039b7d1a77bab099c08a58726b9840252aa7ad62 Mar 25 10:01:03 synocodesign: GRUB_VER: OK Mar 25 10:01:03 synocodesign: BLAKE2b-256 (rd.gz) = da577203ce50532a60d8782a6089aefd5a9ad0f97aaf9631f1710a5a0a6e402b Mar 25 10:01:03 synocodesign: rd.gz: OK Mar 25 10:01:03 synocodesign: BLAKE2b-256 (grub_cksum.syno) = 03bb57be2137cd1fbd174b43761790096cb7fbec1923b091f3db044fbcb29cfa Mar 25 10:01:03 synocodesign: grub_cksum.syno: OK Mar 25 10:01:03 synocodesign: BLAKE2b-256 (H2OFFT-Lx64) = 5a289c5c00df6b52a5739165e82a4372379c6399a3ccd491413601d65c85e2ec Mar 25 10:01:03 synocodesign: H2OFFT-Lx64: OK Mar 25 10:01:03 synocodesign: BLAKE2b-256 (bios.ROM) = f82f451861f674f2ef977227ee5d23b768fa677ee53404588ff1a9aff4ade768 Mar 25 10:01:03 synocodesign: bios.ROM: OK Mar 25 10:01:03 synocodesign: BLAKE2b-256 (platform.ini) = 0d8ad5777af60d054fb28cd454f5e9fb698e3e87c40c5431b10e81e302d173f8 Mar 25 10:01:03 synocodesign: platform.ini: OK Mar 25 10:01:03 synocodesign: BLAKE2b-256 (hda1.tgz) = ff13a8732fed6259fae0ca7d06cf9f0aa7bc9bcc1bfa13b7242b13112dce7177 Mar 25 10:01:03 synocodesign: hda1.tgz: OK Mar 25 10:01:03 synocodesign: BLAKE2b-256 (indexdb.txz) = c77e97e62418450adecba2a8eb2e69b3647c77a584819b5375a9a947f53b22ef Mar 25 10:01:03 synocodesign: indexdb.txz: OK Mar 25 10:01:03 synocodesign: BLAKE2b-256 (synohdpack_img.txz) = 8d03e5297bcb1587085e6a6bdf3e1508b990423ee77b9454a8806b68c05f4c58 Mar 25 10:01:03 synocodesign: synohdpack_img.txz: OK Mar 25 10:01:03 synocodesign: BLAKE2b-256 (packages/dsm6-ui-compatible-1.0.0-0090.spk) = 21f0ebcd955a0b7ddef976668c8bbcddc680e4cd0a08c051cc8eef81eb618520 Mar 25 10:01:03 synocodesign: packages/dsm6-ui-compatible-1.0.0-0090.spk: OK Mar 25 10:01:03 synocodesign: BLAKE2b-256 (packages/USBCopy-x86_64-2.2.0-1076.spk) = 43d5accb1e160e73c261e2ee7e929816466141c00701c2217153c422194594d6 Mar 25 10:01:03 synocodesign: packages/USBCopy-x86_64-2.2.0-1076.spk: OK Mar 25 10:01:03 synocodesign: BLAKE2b-256 (packages/SynologyUniversalSearch-x86_64-1.5.2-0516.spk) = d6a26cb39703f18248532a77598bfafa0c5c6a1af8f1bd21c3544a17bd65a366 Mar 25 10:01:03 synocodesign: packages/SynologyUniversalSearch-x86_64-1.5.2-0516.spk: OK Mar 25 10:01:03 synocodesign: BLAKE2b-256 (packages/SecureSignIn-x86_64-1.0.3-0138.spk) = 1cbc1d2c29bd41c177462713beed98a194c903100c19acb611d34f26fdbb63e3 Mar 25 10:01:03 synocodesign: packages/SecureSignIn-x86_64-1.0.3-0138.spk: OK Mar 25 10:01:03 synocodesign: BLAKE2b-256 (packages/ScsiTarget-x86_64-1.0.2-0207.spk) = cfcc18e7080d14ac49b0cc1d3b400765a3b52cdcb2852abb649b1cb25f10410d Mar 25 10:01:03 synocodesign: packages/ScsiTarget-x86_64-1.0.2-0207.spk: OK Mar 25 10:01:03 synocodesign: BLAKE2b-256 (packages/SMBService-x86_64-4.10.18-0316.spk) = 415d75a8b0317a6dee0142aaedc084efe4da80bd39f71520adf671972da1ea56 Mar 25 10:01:03 synocodesign: packages/SMBService-x86_64-4.10.18-0316.spk: OK Mar 25 10:01:03 synocodesign: BLAKE2b-256 (packages/Python2-x86_64-2.7.18-1004.spk) = a081dba0d92d460b9828b50e3848bb09834d0cf46b6ece19721965c3b013b819 Mar 25 10:01:03 synocodesign: packages/Python2-x86_64-2.7.18-1004.spk: OK Mar 25 10:01:03 synocodesign: BLAKE2b-256 (packages/OAuthService-x86_64-1.1.2-0071.spk) = d2c1a75b441827a159dd1662ef4deaf980f08850c16803bc2b0c997a3e82b167 Mar 25 10:01:03 synocodesign: packages/OAuthService-x86_64-1.1.2-0071.spk: OK Mar 25 10:01:03 synocodesign: BLAKE2b-256 (packages/HybridShare-apollolake-1.2.0-0650.spk) = 1fd9e9c5ef0fd7e040dc08c6cf3e98bbbd244a99ef589f18ed46c7487f0599b9 Mar 25 10:01:03 synocodesign: packages/HybridShare-apollolake-1.2.0-0650.spk: OK Mar 25 10:01:03 synocodesign: BLAKE2b-256 (packages/HighAvailability-x86_64-2.1.1-1279.spk) = 923bd2d1896fa6b5b0707a5363589c41c3f5574f83e1fb82aa5aae406030f2c7 Mar 25 10:01:03 synocodesign: packages/HighAvailability-x86_64-2.1.1-1279.spk: OK Mar 25 10:01:03 synocodesign: BLAKE2b-256 (packages/FileStation-x86_64-1.3.1-1382.spk) = ae14221440cbbb1eccd348e7adf00c2daf85a18e5759390a32a634700fb1faf7 Mar 25 10:01:03 synocodesign: packages/FileStation-x86_64-1.3.1-1382.spk: OK Mar 25 10:01:03 synocodesign: BLAKE2b-256 (packages/DhcpServer-x86_64-1.0.0-0034.spk) = 19369e16d3653d2adfd3054ecdf195e2f70a7081a7ae67469cb7e5f14e2e93f8 Mar 25 10:01:03 synocodesign: packages/DhcpServer-x86_64-1.0.0-0034.spk: OK Mar 25 10:01:03 synocodesign: BLAKE2b-256 (packages/ActiveInsight-x86_64-1.1.0-1121.spk) = e3cd03d10840bec796f1d73757c68c81f09710ba94a7fd6745ed3132cb30a3b6 Mar 25 10:01:03 synocodesign: packages/ActiveInsight-x86_64-1.1.0-1121.spk: OK Mar 25 10:01:03 synocodesign: BLAKE2b-256 (texts/chs/strings) = daaeffe8730f3b64dc5ff3012022d00ff9eccae6498fcc29b50b567db8214755 Mar 25 10:01:03 synocodesign: texts/chs/strings: OK Mar 25 10:01:03 synocodesign: BLAKE2b-256 (texts/cht/strings) = 8bf545442dffdb3653fbbfc6c1a760cec6895e3c09ba1922c60d776de5f7f965 Mar 25 10:01:03 synocodesign: texts/cht/strings: OK Mar 25 10:01:03 synocodesign: BLAKE2b-256 (texts/csy/strings) = 414b7446d4271621bb6a62ef756bc29be82881adc1bd8d3ba857e55271fc5d64 Mar 25 10:01:03 synocodesign: texts/csy/strings: OK Mar 25 10:01:03 synocodesign: BLAKE2b-256 (texts/dan/strings) = 7875012a44709e6e96df56c634adce2b79fc399f655475f91acaeab00f03a39f Mar 25 10:01:03 synocodesign: texts/dan/strings: OK Mar 25 10:01:03 synocodesign: BLAKE2b-256 (texts/enu/strings) = 0bb2656537d29ca293dfb89a9b646802e4ab2df7897b7eac69984cf048b52e9c Mar 25 10:01:03 synocodesign: texts/enu/strings: OK Mar 25 10:01:03 synocodesign: BLAKE2b-256 (texts/fre/strings) = 4225e913f64e806446c4311ae204814bd381bdd743a95dd1619e8bf6705a6024 Mar 25 10:01:03 synocodesign: texts/fre/strings: OK Mar 25 10:01:03 synocodesign: BLAKE2b-256 (texts/ger/strings) = 466d3092e6bca364bb9fb12c2b1f85e3c2fd66a9b5d2095ca21e247b97ea9388 Mar 25 10:01:03 synocodesign: texts/ger/strings: OK Mar 25 10:01:03 synocodesign: BLAKE2b-256 (texts/hun/strings) = 49bdaf196a4a3ef23c6db88a7082770caa5be970c5f4f8b09a5f3f2facf41dbf Mar 25 10:01:03 synocodesign: texts/hun/strings: OK Mar 25 10:01:03 synocodesign: BLAKE2b-256 (texts/ita/strings) = 31260083120ac283cdffbcb5125276f986c653aedfb7b86ed695f0d805bfaf60 Mar 25 10:01:03 synocodesign: texts/ita/strings: OK Mar 25 10:01:03 synocodesign: BLAKE2b-256 (texts/jpn/strings) = ed7e700421fbcbb235123cb9677878d1cf4e4a8aeb95d5c4672bd02a07f06050 Mar 25 10:01:03 synocodesign: texts/jpn/strings: OK Mar 25 10:01:03 synocodesign: BLAKE2b-256 (texts/krn/strings) = 9fb3a65a09ba27ed467dc1f69c6018052b8cdb2a78f8777e5d78ea5520c512e2 Mar 25 10:01:03 synocodesign: texts/krn/strings: OK Mar 25 10:01:03 synocodesign: BLAKE2b-256 (texts/nld/strings) = 0f85cdc97b7ceecee606e717c81e6aa8c95757390ba206c5f2016e448ecfcfb5 Mar 25 10:01:03 synocodesign: texts/nld/strings: OK Mar 25 10:01:03 synocodesign: BLAKE2b-256 (texts/nor/strings) = 3bca34926da5beb7471c4eb7f0fa8548019f422e6d32bdf79586eae29cb8a9f3 Mar 25 10:01:03 synocodesign: texts/nor/strings: OK Mar 25 10:01:03 synocodesign: BLAKE2b-256 (texts/plk/strings) = 16f1ad6aec35b00add15764bd61b89ce48385793361c967f1d61912b169b0e9d Mar 25 10:01:03 synocodesign: texts/plk/strings: OK Mar 25 10:01:03 synocodesign: BLAKE2b-256 (texts/ptb/strings) = 43d8df16073f55a31a35f48f0eb58bd0a1b5c933d3518404691769a430d3ef54 Mar 25 10:01:03 synocodesign: texts/ptb/strings: OK Mar 25 10:01:03 synocodesign: BLAKE2b-256 (texts/ptg/strings) = 70959b1947a9084653b0f2c02a259ae384bed0f943f915fad36820e91b71a9f4 Mar 25 10:01:03 synocodesign: texts/ptg/strings: OK Mar 25 10:01:03 synocodesign: BLAKE2b-256 (texts/rus/strings) = a7284a09f64c3b30e37b4277ed3f6ed353aa2f5b1b889ac35a26139a7e2b4696 Mar 25 10:01:03 synocodesign: texts/rus/strings: OK Mar 25 10:01:03 synocodesign: BLAKE2b-256 (texts/spn/strings) = 4d23573dd30d3cd1237ebcbb5a245ec92fe64cd12df7e03ba7361acf9d70f687 Mar 25 10:01:03 synocodesign: texts/spn/strings: OK Mar 25 10:01:03 synocodesign: BLAKE2b-256 (texts/sve/strings) = 962f68c534ccb1c2fb16203ead371c40086ed87d067266486b1397699d3f640f Mar 25 10:01:03 synocodesign: texts/sve/strings: OK Mar 25 10:01:03 synocodesign: BLAKE2b-256 (texts/tha/strings) = f6fe4677f6d67d40127a0f99984a040721ed0b6d5245e0426c809d3b78233c7d Mar 25 10:01:03 synocodesign: texts/tha/strings: OK Mar 25 10:01:03 synocodesign: BLAKE2b-256 (texts/trk/strings) = 1f45e3781d7357e229f76e8f6bb3a96b86c49bd6c3880c089bd74f4e6c9fe942 Mar 25 10:01:03 synocodesign: texts/trk/strings: OK Mar 25 10:01:03 synocodesign: BLAKE2b-256 (expired_models) = efbb8e376238e2ed1a5e064c89aae01f6eafcb75e9060a36d7a84b154da7fabd Mar 25 10:01:03 synocodesign: expired_models: OK Mar 25 10:01:03 synocodesign: BLAKE2b-256 (DiskCompatibilityDB.tar) = f6f3b3037c0daf35806555c453b6205b7ccef8c5cf69f4a3e8965bd9b6183228 Mar 25 10:01:03 synocodesign: DiskCompatibilityDB.tar: OK Mar 25 10:01:03 synocodesign: BLAKE2b-256 (ha_dummy_ocf/infoset) = b1fc7004374f8532e0ee6b32e2ac17e53f64d45f09d9cccee2514c3440a44e9f Mar 25 10:01:03 synocodesign: ha_dummy_ocf/infoset: OK Mar 25 10:01:03 synocodesign: BLAKE2b-256 (ha_dummy_ocf/dsm_rear) = 5bfd7437657591952f30360fed3accc059187c322f50ec3f17dedf026b908796 Mar 25 10:01:03 synocodesign: ha_dummy_ocf/dsm_rear: OK Mar 25 10:01:03 synocodesign: BLAKE2b-256 (ha_dummy_ocf/dsm_first) = 5bfd7437657591952f30360fed3accc059187c322f50ec3f17dedf026b908796 Mar 25 10:01:03 synocodesign: ha_dummy_ocf/dsm_first: OK Mar 25 10:01:03 synocodesign: BLAKE2b-256 (ha_dummy_ocf/PromoteBegin) = 5bfd7437657591952f30360fed3accc059187c322f50ec3f17dedf026b908796 Mar 25 10:01:03 synocodesign: ha_dummy_ocf/PromoteBegin: OK Mar 25 10:01:03 synocodesign: BLAKE2b-256 (synohamessaged-update) = b9b6ebc709777915453d9a402f9346190564cf8a899ad7c8112bed40d97c07da Mar 25 10:01:03 synocodesign: synohamessaged-update: OK Mar 25 10:01:03 install.cgi: RemoveUpgradeFile: Remove /tmpData/upd@te.pat... Mar 25 10:01:03 install.cgi: Verify checksum of [/tmpData/upd@te]... Mar 25 10:01:04 install.cgi: Pass checksum of /tmpData/upd@te... Mar 25 10:01:04 updater: updater.c:6767 Start of the updater... Mar 25 10:01:04 updater: updater.c:3227 orgBuildNumber = 42218, newBuildNumber=42218 Mar 25 10:01:04 updater: util/updater_util.cpp:86 fail to read company in /tmpRoot//etc.defaults/synoinfo.conf Mar 25 10:01:04 updater: updater.c:7045 ==== Start flash update ==== Mar 25 10:01:04 updater: updater.c:7049 This is X86 platform Mar 25 10:01:04 kernel: [ 120.173323] ext2: synoboot2 mounted, process=updater Mar 25 10:01:04 kernel: [ 120.179766] vfat: synoboot2 mounted, process=updater Mar 25 10:01:04 kernel: [ 120.217688] synoboot2 unmounted, process=updater Mar 25 10:01:04 kernel: [ 120.237820] ext2: synoboot2 mounted, process=updater Mar 25 10:01:04 kernel: [ 120.244966] vfat: synoboot2 mounted, process=updater Mar 25 10:01:04 kernel: [ 120.282708] synoboot2 unmounted, process=updater Mar 25 10:01:04 kernel: [ 120.302785] ext2: synoboot2 mounted, process=updater Mar 25 10:01:04 kernel: [ 120.309948] vfat: synoboot2 mounted, process=updater Mar 25 10:01:04 kernel: [ 120.347759] synoboot2 unmounted, process=updater Mar 25 10:01:04 updater: updater.c:7065 The SynoBoot partitions exist. Mar 25 10:01:04 updater: updater.c:4072 SYNORedBootUpdCheckAndApply(4072): Skip bootloader update, no uboot_do_upd.sh exists Mar 25 10:01:04 kernel: [ 120.362823] ext2: synoboot2 mounted, process=updater Mar 25 10:01:04 kernel: [ 120.369949] vfat: synoboot2 mounted, process=updater Mar 25 10:01:05 updater: updater.c:616 checksum generated by [/bin/grep -i zImage checksum.syno >> /tmp/checksum.syno.tmp] Mar 25 10:01:05 updater: updater.c:645 file [zImage] is being copied to [/tmp/bootmnt] Mar 25 10:01:05 updater: updater.c:653 file [/tmp/bootmnt/zImage] process done. Mar 25 10:01:05 updater: updater.c:616 checksum generated by [/bin/grep -i rd.gz checksum.syno >> /tmp/checksum.syno.tmp] Mar 25 10:01:05 updater: updater.c:645 file [rd.gz] is being copied to [/tmp/bootmnt] Mar 25 10:01:05 updater: updater.c:653 file [/tmp/bootmnt/rd.gz] process done. Mar 25 10:01:05 updater: updater.c:616 checksum generated by [/bin/grep -i grub_cksum.syno checksum.syno >> /tmp/checksum.syno.tmp] Mar 25 10:01:05 updater: updater.c:645 file [grub_cksum.syno] is being copied to [/tmp/bootmnt] Mar 25 10:01:05 updater: updater.c:653 file [/tmp/bootmnt/grub_cksum.syno] process done. Mar 25 10:01:05 updater: updater.c:636 file [/tmp/bootmnt/hda1.tgz] is being removed Mar 25 10:01:05 updater: updater.c:653 file [/tmp/bootmnt/hda1.tgz] process done. Mar 25 10:01:05 updater: updater.c:636 file [/tmp/bootmnt/updater] is being removed Mar 25 10:01:05 updater: updater.c:653 file [/tmp/bootmnt/updater] process done. Mar 25 10:01:05 updater: updater.c:636 file [/tmp/bootmnt/VERSION] is being removed Mar 25 10:01:05 updater: updater.c:653 file [/tmp/bootmnt/VERSION] process done. Mar 25 10:01:05 updater: updater.c:663 checksum file updated by [/bin/cp -f /tmp/checksum.syno.tmp /tmp/bootmnt/checksum.syno] Mar 25 10:01:09 kernel: [ 125.471486] synoboot2 unmounted, process=updater Mar 25 10:01:14 kernel: [ 130.487634] ext2: synoboot2 mounted, process=updater Mar 25 10:01:14 kernel: [ 130.494790] vfat: synoboot2 mounted, process=updater Mar 25 10:01:15 kernel: [ 131.054439] synoboot2 unmounted, process=updater Mar 25 10:01:15 kernel: [ 131.076928] ext2: synoboot1 mounted, process=updater Mar 25 10:01:15 kernel: [ 131.084178] vfat: synoboot1 mounted, process=updater Mar 25 10:01:15 updater: updater.c:977 This model does not contain KPTI config and skip conversion Mar 25 10:01:15 kernel: [ 131.138797] synoboot1 unmounted, process=updater Mar 25 10:01:15 kernel: [ 131.163811] ext2: synoboot1 mounted, process=updater Mar 25 10:01:15 kernel: [ 131.171055] vfat: synoboot1 mounted, process=updater Mar 25 10:01:15 kernel: [ 131.213113] synoboot1 unmounted, process=updater Mar 25 10:01:15 kernel: [ 131.226430] Module [phy_alloc] is removed. Mar 25 10:01:15 updater: updater.c:7432 ==== Finish flash update ==== Mar 25 10:01:15 updater: updater.c:7448 ==== Start updater backup flash image ==== Mar 25 10:01:15 updater: updater.c:5511 successfully backup image for System Migration in path (/tmpRoot/.syno/patch). Mar 25 10:01:15 updater: updater.c:7456 ==== Finish updater backup flash image ==== Mar 25 10:01:15 updater: updater.c:7465 ==== Start updater move/extract hda1 and packages ==== Mar 25 10:01:15 updater: updater.c:5910 Decompress hda1.tgz to SynoUpgrade.tar Mar 25 10:01:35 updater: updater.c:5774 checksum of /tmpData/SynoUpgrade.tar is written Mar 25 10:01:35 updater: updater.c:5997 file /tmpData/upd@te/sas_fw_upgrade_tool does not exist, skips handling it Mar 25 10:01:35 updater: updater.c:7473 ==== Finish updater move/extract hda1 and packages ==== Mar 25 10:01:35 updater: updater.c:7482 ==== Start updater flag agent unregister ==== Mar 25 10:01:35 updater: updater.c:7488 ==== Finish updater flag agent unregister ==== Mar 25 10:01:35 updater: updater.c:7497 ==== Start updater handling bootup smallupdate ==== Mar 25 10:01:35 updater: lib/synoarchive.c:537 synoinstall: synoarchive: [/tmp/DSM-Security.json][OPEN] Type: SecurityJson Mar 25 10:01:35 updater: lib/synoarchive.c:84 synoinstall: synoarchive: [/tmp/DSM-Security.json][INIT] [/dev/null] Mar 25 10:01:35 updater: lib/synoarchive.c:92 synoinstall: synoarchive: [/tmp/DSM-Security.json][OPEN] Start Mar 25 10:01:35 updater: lib/synoarchive.c:106 synoinstall: synoarchive: [/tmp/DSM-Security.json][OPEN] End: [Success][3688618971][0.000s] Mar 25 10:01:35 updater: lib/synoarchive.c:229 synoinstall: synoarchive: [/tmp/DSM-Security.json][FREE] Mar 25 10:01:37 updater: lib/synoarchive.c:548 synoinstall: synoarchive: [/tmpData/.SynoUpgradeBootupSmallUpdate.pat][OPEN] Type: Nano Mar 25 10:01:37 updater: lib/synoarchive.c:84 synoinstall: synoarchive: [/tmpData/.SynoUpgradeBootupSmallUpdate.pat][INIT] [/var/tmp/smallupd@teTmpPackedUpdate.jUB13j] Mar 25 10:01:37 updater: lib/synoarchive.c:92 synoinstall: synoarchive: [/tmpData/.SynoUpgradeBootupSmallUpdate.pat][OPEN] Start Mar 25 10:01:37 updater: lib/synoarchive.c:106 synoinstall: synoarchive: [/tmpData/.SynoUpgradeBootupSmallUpdate.pat][OPEN] End: [Success][3688618971][0.017s] Mar 25 10:01:37 updater: lib/synoarchive.c:286 synoinstall: synoarchive: [/tmpData/.SynoUpgradeBootupSmallUpdate.pat][EXTRACT_ALL] Start Mar 25 10:01:37 updater: lib/synoarchive.c:303 synoinstall: synoarchive: [/tmpData/.SynoUpgradeBootupSmallUpdate.pat][EXTRACT_ALL] End: [Success][3688618971][0.020s] Mar 25 10:01:37 updater: lib/synoarchive.c:229 synoinstall: synoarchive: [/tmpData/.SynoUpgradeBootupSmallUpdate.pat][FREE] Mar 25 10:01:37 updater: autonano.cpp:244 No flash update needed. Skip Mar 25 10:01:37 updater: updater.c:7507 ==== Finish updater handling bootup smallupdate ==== Mar 25 10:01:37 updater: updater.c:7520 ==== Finish updater post-action ==== Mar 25 10:01:37 updater: updater.c:7568 Congratulations!! The update has been completed!! Do configupdate when next bootup. Mar 25 10:01:37 install.cgi: ninstaller.c:1546 Executing [/tmpData/upd@te/updater -v /tmpData > /dev/null 2>&1] error[0] Mar 25 10:01:37 install.cgi: ErrFHOSTCleanPatchDirFile: After updating /tmpData/upd@te...cmd=[/bin/rm -rf /tmpData/upd@te > /dev/null 2>&1] Mar 25 10:01:37 install.cgi: ErrFHOSTCleanPatchDirFile: Remove /tmpData/upd@te.pat... Mar 25 10:01:37 install.cgi: ninstaller.c:1811(ErrFHOSTDoUpgrade) err=[0] Mar 25 10:01:37 install.cgi: ninstaller.c:1815(ErrFHOSTDoUpgrade) retv=[0] Mar 25 10:01:37 install.cgi: ninstaller.c:123 Mount partion /dev/md0 /mnt Mar 25 10:01:46 install.cgi: ninstaller.c:152 umount partition /mnt Mar 25 10:01:46 install.cgi: ninstaller.c:152 umount partition /tmpData Mar 25 10:01:55 root: Start backing up logs in junior mode Mar 25 10:01:55 kernel: [ 171.285018] EXT4-fs (md0): couldn't mount as ext3 due to feature incompatibilities Mar 25 10:01:55 kernel: [ 171.385160] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null) Mar 25 10:01:55 reboot: init/halt.c (241) syno_poweroff_task start I will try to build again a DS3622xs+ image with the option auto to see what happens Quote Link to comment Share on other sites More sharing options...
Hackaro Posted March 25, 2022 Share #1621 Posted March 25, 2022 (edited) @pocopico @IG-88 Recently I've installed RedPill-TC (0.46-uefi version) with DSM 7.0.1-42818 on my hardware (in signature) and everything is working pretty well after one month of testing. But one small problem is with HW acceleration of my iGPU... my CPU is an i3-8100 and its Device ID is 3e91 which, from this old (DSM 6.2.x) link , is supported OOB from Synology DSM (at least the 6.x version). Spoiler lspci -nnQ 0000:00:00.0 Host bridge [0600]: Intel Corporation 8th Gen Core 4-core Desktop Processor Host Bridge/DRAM Registers [Coffee Lake S] [8086:3e1f] (rev 08) 0000:00:02.0 VGA compatible controller [0300]: Intel Corporation CoffeeLake-S GT2 [UHD Graphics 630] [8086:3e91] 0000:00:12.0 Signal processing controller [1180]: Intel Corporation Cannon Lake PCH Thermal Controller [8086:a379] (rev 10) 0000:00:14.0 USB controller [0c03]: Intel Corporation Cannon Lake PCH USB 3.1 xHCI Host Controller [8086:a36d] (rev 10) 0000:00:14.2 RAM memory [0500]: Intel Corporation Cannon Lake PCH Shared SRAM [8086:a36f] (rev 10) 0000:00:16.0 Communication controller [0780]: Intel Corporation Cannon Lake PCH HECI Controller [8086:a360] (rev 10) 0000:00:16.3 Serial controller [0700]: Intel Corporation Cannon Lake PCH Active Management Technology - SOL [8086:a363] (rev 10) 0000:00:17.0 SATA controller [0106]: Intel Corporation Cannon Lake PCH SATA AHCI Controller [8086:a352] (rev 10) 0000:00:1b.0 PCI bridge [0604]: Intel Corporation Cannon Lake PCH PCI Express Root Port #17 [8086:a340] (rev f0) 0000:00:1b.4 PCI bridge [0604]: Intel Corporation Cannon Lake PCH PCI Express Root Port #21 [8086:a32c] (rev f0) 0000:00:1c.0 PCI bridge [0604]: Intel Corporation Cannon Lake PCH PCI Express Root Port #1 [8086:a338] (rev f0) 0000:00:1c.5 PCI bridge [0604]: Intel Corporation Cannon Lake PCH PCI Express Root Port #6 [8086:a33d] (rev f0) 0000:00:1c.7 PCI bridge [0604]: Intel Corporation Cannon Lake PCH PCI Express Root Port #8 [8086:a33f] (rev f0) 0000:00:1d.0 PCI bridge [0604]: Intel Corporation Cannon Lake PCH PCI Express Root Port #9 [8086:a330] (rev f0) 0000:00:1f.0 ISA bridge [0601]: Intel Corporation Cannon Point-LP LPC Controller [8086:a309] (rev 10) 0000:00:1f.3 Audio device [0403]: Intel Corporation Cannon Lake PCH cAVS [8086:a348] (rev 10) 0000:00:1f.4 SMBus [0c05]: Intel Corporation Cannon Lake PCH SMBus Controller [8086:a323] (rev 10) 0000:00:1f.5 Serial bus controller [0c80]: Intel Corporation Cannon Lake PCH SPI Controller [8086:a324] (rev 10) 0000:02:00.0 Non-Volatile memory controller [0108]: Samsung Electronics Co Ltd NVMe SSD Controller SM981/PM981/PM983 [144d:a808] 0000:04:00.0 Ethernet controller [0200]: Intel Corporation I210 Gigabit Network Connection [8086:1533] (rev 03) 0000:05:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8125 2.5GbE Controller [10ec:8125] 0000:06:00.0 Non-Volatile memory controller [0108]: Samsung Electronics Co Ltd NVMe SSD Controller SM981/PM981/PM983 [144d:a808] 0001:00:12.0 SATA controller [0106]: Intel Corporation Celeron N3350/Pentium N4200/Atom E3900 Series SATA AHCI Controller [8086:5ae3] 0001:00:13.0 Non-VGA unclassified device [0000]: Intel Corporation Celeron N3350/Pentium N4200/Atom E3900 Series PCI Express Port A #1 [8086:5ad8] 0001:00:14.0 Non-VGA unclassified device [0000]: Intel Corporation Celeron N3350/Pentium N4200/Atom E3900 Series PCI Express Port B #1 [8086:5ad6] 0001:00:15.0 USB controller [0c03]: Intel Corporation Celeron N3350/Pentium N4200/Atom E3900 Series USB xHCI [8086:5aa8] 0001:00:16.0 Signal processing controller [1180]: Intel Corporation Celeron N3350/Pentium N4200/Atom E3900 Series I2C Controller #1 [8086:5aac] 0001:00:18.0 Signal processing controller [1180]: Intel Corporation Celeron N3350/Pentium N4200/Atom E3900 Series HSUART Controller #1 [8086:5abc] 0001:00:19.0 Signal processing controller [1180]: Intel Corporation Celeron N3350/Pentium N4200/Atom E3900 Series SPI Controller #3 [8086:5ac6] 0001:00:19.2 Signal processing controller [1180]: Intel Corporation Celeron N3350/Pentium N4200/Atom E3900 Series SPI Controller #3 [8086:5ac6] 0001:00:1f.0 SMBus [0c05]: Intel Corporation Celeron N3350/Pentium N4200/Atom E3900 Series SMBus Controller [8086:5ad4] 0001:00:1f.1 SMBus [0c05]: Intel Corporation Celeron N3350/Pentium N4200/Atom E3900 Series SMBus Controller [8086:5ad4] 0001:01:00.0 SATA controller [0106]: Marvell Technology Group Ltd. 88SE9215 PCIe 2.0 x1 4-port SATA 6 Gb/s Controller [1b4b:9215] (rev 11) 0001:02:00.0 Ethernet controller [0200]: Intel Corporation I211 Gigabit Network Connection [8086:1539] (rev 03) 0001:03:00.0 Ethernet controller [0200]: Intel Corporation I211 Gigabit Network Connection [8086:1539] (rev 03) but if I check: more /usr/syno/etc/codec/activation.conf {"success":false,"msg":"SN format is wrong."} but if I check the presence of dev/dri: /dev/dri# dir total 0 drwxr-xr-x 2 root root 80 Mar 25 10:47 . drwxr-xr-x 12 root root 14440 Mar 25 10:48 .. crw------- 1 root root 226, 0 Mar 25 10:47 card0 crw-rw---- 1 root videodriver 226, 128 Mar 25 10:47 renderD128 which might indicate me that the HW GPU acceleration is in place. Using VideoStation I can see it can transcode FHD H.264 movies with roughly 25/26% of CPU utilisation, which is significant higher than expected for a 4 cores CPU. Can someone help me in going in the right direction? Edited March 25, 2022 by Hackaro Quote Link to comment Share on other sites More sharing options...
IG-88 Posted March 25, 2022 Share #1622 Posted March 25, 2022 7 hours ago, Hackaro said: But one small problem is with HW acceleration of my iGPU... my CPU is an i3-8100 and its Device ID is 3e91 which, from this old (DSM 6.2.x) link , is supported OOB from Synology DSM (at least the 6.x version). used i915 driver version is the same as in 6.2.3 so its supposed to be working in my extra.lzma for 6.2.3 is no i195 driver but there are i915 firmware files, synology only delivers firmware for apollo and gemini lake with dsm, coffee lake need other firmware, imho "kbl_dmc_ver1_04.bin", check content of /lib/firmware/i915 if its only "bxt_dmc_ver1_07.bin" and "glk_dmc_ver1_04.bin" then its just dsm's default in theory the loader would have to take care of that internal or using default extension for 918+ containing the firmware files as the driver version is the same as in 6.2.3 it possible to extract the extra.lzma with 7zip or any tool that can handle lzma or you download the file from here and copy the firmware (dont use the i915 in that, seems nor to work properly yet) https://xpenology.com/forum/topic/48743-drivers-extension-for-redpill-request-for-comments-drivers-packages/?do=findComment&comment=268029 1 Quote Link to comment Share on other sites More sharing options...
Hackaro Posted March 25, 2022 Share #1623 Posted March 25, 2022 (edited) 2 hours ago, IG-88 said: used i915 driver version is the same as in 6.2.3 so its supposed to be working in my extra.lzma for 6.2.3 is no i195 driver but there are i915 firmware files, synology only delivers firmware for apollo and gemini lake with dsm, coffee lake need other firmware, imho "kbl_dmc_ver1_04.bin", check content of /lib/firmware/i915 if its only "bxt_dmc_ver1_07.bin" and "glk_dmc_ver1_04.bin" then its just dsm's default @IG-88 thanks for the reply! ... not sure if I understood correctly but yesterday I noticed this error and maybe it's related to the discussion we're having here: dmesg | grep error [ 1.610201] intel-lpss: probe of 0001:00:16.0 failed with error -22 [ 1.610298] intel-lpss: probe of 0001:00:18.0 failed with error -22 [ 1.610411] intel-lpss: probe of 0001:00:19.0 failed with error -22 [ 1.610708] intel-lpss: probe of 0001:00:19.2 failed with error -22 [ 4.155854] ahci: probe of 0001:01:00.0 failed with error -22 [ 4.155945] ahci: probe of 0001:00:12.0 failed with error -22 [ 4.407352] xhci_hcd: probe of 0001:00:15.0 failed with error -16 [ 4.462722] igb: probe of 0001:02:00.0 failed with error -5 [ 4.462811] igb: probe of 0001:03:00.0 failed with error -5 [ 17.328835] i915 0000:00:02.0: Direct firmware load for i915/kbl_dmc_ver1_04.bin failed with error -2 look at the last line's error. And in fact: :/lib/firmware/i915# dir total 32 drwxr-xr-x 2 root root 4096 Mar 14 18:29 . drwxr-xr-x 3 root root 4096 Mar 14 18:29 .. -rwxr-xr-x 1 root root 8380 Jan 18 2021 bxt_dmc_ver1_07.bin -rwxr-xr-x 1 root root 8800 Jan 18 2021 glk_dmc_ver1_04.bin so the file kbl_dmc_ver1_04.bin is missing, as you said. So I just add that file and I'm done, correct? Even if i3-8100 is not a kbl (kaByLake) but Coffee Lake? Edited March 25, 2022 by Hackaro Quote Link to comment Share on other sites More sharing options...
agent47SG1 Posted March 25, 2022 Share #1624 Posted March 25, 2022 (edited) Hello, First of all, many thanks to dev fors redpill loader and tinycore tools. I build a DS3622xs+ setup based on a Asus Maximus VII Hero (Z97 chipset)/i7 4790K/16GB whith TinyCore v0.4.6. The installation was successful and i created a Storage Group SHR with 4*6TB+3*4TB. On my previeus build on DSM6.2, the Seagate IronWolf 4TB drive was recognized with specific icon and not on DSM7, is it nomal ? Morover, on the new system, the health drive information windows is empty Thank for your help SR Edited March 25, 2022 by agent47SG1 Quote Link to comment Share on other sites More sharing options...
Penguin Power Posted March 25, 2022 Share #1625 Posted March 25, 2022 On 12/28/2021 at 9:14 AM, pocopico said: https://github.com/pocopico/tinycore-redpill Thank you to this wonderful community, I have finally upgraded my setup to "Broadwellnk-7.0.1-42218 DS3622xs+" Intel(R) Core(TM) i5-2400 CPU @ 3.10GHz 32GB RAM 3 x SATA drives On-Board Nic = Tigon3 (BCM57788)* Used - tinycore-redpill.v0.4.6.img with SATA map port - "SataPortMap": "6", "DiskIdxMap": "00" (Note:-I also had issue of "Something went wrong and SATA ports have been disabled. The way I got around is by editing the grub prompt with "SataPortMap=1" which only detected one of my SATA disk + finished installation. After installation, I booted normally "keeping SAtaPortMap=6" which detected all 3 SATA disks) @pocopico Just want to bring to your notice that I am having issues using TG3 drivers. TinyCore Linux is able to detect the NIC and rploader build script was fetching TG3 driver from https://github.com/pocopico/rp-ext/blob/main/tg3/rpext-index.json. But unfortunately after reboot, no luck getting DHCP request. I tried mostly all other builds but encountered same issue. Bought a new PCIe Card which worked flawlessly for completing installation. Even now my setup is still not detecting On-Board Nic Tigon3 (BCM57788) and that was the reason I was not getting DHCP request initially. For your reference find below output for TG3 card initialization from ==================== tinycore-redpill Linux output ===================== root@box:/home/tc# dmesg | grep -i tg [ 1.399900] libphy: tg3 mdio bus: probed [ 1.414234] tg3 0000:03:00.0 eth1: Tigon3 [partno(BCM57788) rev 57780001] (PCI Express) MAC address d4:xx:xx:xx:xx:xx [ 1.414236] tg3 0000:03:00.0 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] [ 1.414237] tg3 0000:03:00.0 eth1: dma_rwctrl[76180000] dma_mask[64-bit] ============================================== Broadwellnk-7.0.1-42218 DS3622xs+ (after finishing installation) ============================================== [ 4.669636] tg3.c:v3.137 (May 11, 2014) [ 4.671035] libphy: tg3 mdio bus: probed [ 4.671098] tg3 0000:03:00.0: No PHY devices [ 4.671200] tg3 0000:03:00.0: Problem fetching invariants of chip, aborting It sounds like tg3 driver is not getting loaded due to variation in chip!! Again, Thanks everyone!! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.