painkiller895

Members
  • Content Count

    62
  • Joined

  • Last visited

Everything posted by painkiller895

  1. painkiller895

    Connect to XPenology after location changed

    do you remember the ip address at the old home address ? was it a internet address or LAN address ??? Do you have a LAN network at home ? How much data you talking about. If you can back it up do it, and do a reinstall. Your data should be there just don't whipe out the drives. What loader are you using ???
  2. painkiller895

    Connect to XPenology after location changed

    If you have a intel LAN card laying around add it to the nas box. REBOOT connected to your router and get a DHCP ip number connect to that ip number and change the ip address on your nas box to the dhcp ip . (Remove the old ip address and update the ip address to the new one. ) You should be back up !
  3. painkiller895

    DSM 6.2 Loader

    Try Win32 Diskimage
  4. painkiller895

    Stability issues after upgrading to DSM 6.2.1

    the old system files that were not needed with this version of loader... Glad I could help, enjoy !
  5. painkiller895

    Stability issues after upgrading to DSM 6.2.1

    Write down all your loader info, and try using the other 918+ loader to see if that helps. Do you have a spare hard drive that you can do a fresh install to see if it works, if it does then you migrate your old drive to the new system. remember to take out the active drive out. Start fresh see if it works....
  6. painkiller895

    Stability issues after upgrading to DSM 6.2.1

    Try this Activate the SSH service in DSM (if not active) Connect to your NAS with an SSH client (e.g. putty) (or from Win 10, open a cmd window, run : ssh admin@my.nas.ip (replace with the actual IP) Enter your credentials (user: admin) Change folder to root (cd /) Delete the xpenoboot folder (sudo rm -r .xpenoboot) If the SSH service keeps stopping, you have to be quick You might have to reboot after this. after your done reboot... also disconnect our monitor if possible...
  7. painkiller895

    OptiPlex 380 Update problem

    Try loader DS3615xs It all depends on your hardware also...
  8. painkiller895

    DS918+ Bootloader - Help Needed

    I couldn't see how to edit my previous post. My installation on a Dell T30 did not work. I can only get it to work with 6.1.7 and the 1.02b Boot loader for the 916+. That does work, and quite well. Thanks Jun! ===================================================================== Does your T30 have a Intel Xeon E3-1225 v5 ? Are you booting with UEFI mode ? and HD set to AHCI mode ? VID:# Correct ? PID:# Correct ? If so it should work, on mine it does...I'm using Loader 1.04 on the DS918+ I'm sorry guys this had to be moved to it's proper post, didn't realize where i was...
  9. painkiller895

    DSM 6.2 Loader

    1 hour ago, Trailblazer said: I couldn't see how to edit my previous post. My installation on a Dell T30 did not work. I can only get it to work with 6.1.7 and the 1.02b Boot loader for the 916+. That does work, and quite well. Thanks Jun! ===================================================================== Does your T30 have a Intel Xeon E3-1225 v5 ? Are you booting with UEFI mode ? and HD set to AHCI mode ? VID:# Correct ? PID:# Correct ? If so it should work, on mine it does...I'm using Loader 1.04 on the DS918+ I'm sorry guys this had to be moved to it's proper post, didn't realize where i was...
  10. painkiller895

    DSM 6.2 Loader

    TO IG88 or Jun, Please check loader DS3617xs 6.2 1.03b It will not work with the latest hardware, The highest it will go is 6.2 23739 update 2 from there it breaks. With DS3615xs it works well with old and new hardware and I'm able to update to the latest 6.2.1 23824 update 4. Even using the extra.lzma it will not work I have added intel nics and nothing seems to work. Thanks guys again for the great work !
  11. Sorry i was not able to debug the serial bridge. At moment I have no time to build a cable...
  12. painkiller895

    DSM 6.2.1-23824 Update 1

    Outcome of the installation/update: SUCCESSFUL - DSM version prior update: DSM 6.2.1-23824 update 1 - Loader version and model: JUN'S LOADER v1.04b - DS918 - Using custom extra.lzma: NO - Installation type: BAREMETAL Dell T30 Additional comments: Updated today to DSM 6.2.1-23824 update 2 - Loader version and model: JUN'S LOADER v1.04b - DS918
  13. Can we please have extra.lzma for 3615 and 3617, Have machines that need updating, many of us don't have the cash to build or buy the latest hardware. So please give us that... Many thanks
  14. painkiller895

    DSM 6.2 on DELL PowerEdge T30

    It will not work on ds918+ But it works on DS3617 I have one running now, you must install a Intel nic for it to work since the drivers for the stock nic don't work with loader 1.03b 6.2 untill we get a extra.lzma .
  15. painkiller895

    DSM 6.2 Loader

    For 6.2 you can create extra.lzma with drivers you need, really ? Where is it ? Because they still have not made on yet for DS3617 or DS3615 . They only have it for the DS918+ So we must wait...
  16. painkiller895

    Xpenology Web login access denied

    ssh into the system and change the password...
  17. painkiller895

    DSM 6.2 Loader

    As said before try to del .xpenoboot folder in the root folder. check this topic https://xpenology.com/forum/topic/13002-52-62-jun-loader-103b-no-network-connection/ Also have you tried using another nic ? Try a Intel nic just might work for you. It did for me...
  18. Links are down ! They might be recompiling or working on them...
  19. painkiller895

    DSM 6.2 Loader

    They still have not made a extra.lzma yet for DS3617 & DS3615 Loader 1.03b version, we must wait. As I said try using an Intel nic for now.... it worked for me...
  20. painkiller895

    DSM 6.2 Loader

    Try adding a Intel Dual lan card, that worked for me on my Dell R410. It's a driver issue till they add the extra.lzma .
  21. painkiller895

    DSM 6.2 Loader

    what hardware did you use to do this ? Motherboard, CPU ??
  22. painkiller895

    DSM 6.2 Loader

    to use this loader for the ds918 what USB stick is best. 2.0 or 3.0 ? What mode should be used ACHI ?
  23. Loader DS3617 1.03b on a Dell R410 on board Network not working guess drivers are missing, I added an Intel dual lan card and I was able to update the system. to the latest 6.2-23739 update 2. painkiller895@DSMv2410-127:/$ dmesg | grep "eth" [ 4.295929] usbcore: registered new interface driver ethub [ 18.736287] igb 0000:03:00.0: added PHC on eth0 [ 18.736294] igb 0000:03:00.0: eth0: (PCIe:2.5GT/s:Width x4) [ 18.736297] igb 0000:03:00.0 eth0: MAC: 00:1b:21:a7:42:9c [ 18.736640] igb 0000:03:00.0: eth0: PBA No: G18758-001 [ 18.900626] igb 0000:03:00.1: added PHC on eth1 [ 18.900635] igb 0000:03:00.1: eth1: (PCIe:2.5GT/s:Width x4) [ 18.900638] igb 0000:03:00.1 eth1: MAC: 00:1b:21:a7:42:9d [ 18.900941] igb 0000:03:00.1: eth1: PBA No: G18758-001 [ 20.237881] jme: JMicron JMC2XX ethernet driver version 1.0.8 [ 20.304867] bnx2 0000:01:00.0 eth2: Broadcom NetXtreme II BCM5716 1000Base-T (C0) PCI Express found at mem d8000000, IRQ 36, node addr 78:2b:cb:20:98:a7 [ 20.305773] bnx2 0000:01:00.1 eth3: Broadcom NetXtreme II BCM5716 1000Base-T (C0) PCI Express found at mem da000000, IRQ 48, node addr 78:2b:cb:20:98:a8 [ 23.591877] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 24.221221] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [ 25.778307] igb 0000:03:00.0 eth0: igb: eth0 NIC Link is Up 1000 Mbps Full Du plex, Flow Control: None [ 25.778465] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready painkiller895@DSMv2410-127:/$ painkiller895@DSMv2410-127:/$ lspci -k | grep 'Kernel driver' Kernel driver in use: pcieport Kernel driver in use: pcieport Kernel driver in use: pcieport Kernel driver in use: uhci_hcd Kernel driver in use: uhci_hcd Kernel driver in use: ehci-pci Kernel driver in use: uhci_hcd Kernel driver in use: uhci_hcd Kernel driver in use: uhci_hcd Kernel driver in use: uhci_hcd Kernel driver in use: ehci-pci Kernel driver in use: lpc_ich Kernel driver in use: ahci Kernel driver in use: bnx2 Kernel driver in use: bnx2 Kernel driver in use: igb Kernel driver in use: igb painkiller895@DSMv2410-127:/$ Looks like the bnx2 is missing a driver or file... I also can not update my Dell R710 which uses the same.
  24. Any chance of a extra.lzma file for the new DS3617 for loader 1.03b ?
  25. painkiller895

    Progress of 6.2 loader

    Loader DS3617 1.03b on a Dell R410 on board Network not working guess drivers are missing, I added an Intel dual lan card and I was able to update the system. to the latest 6.2-23739 update 2. painkiller895@DSMv2410-127:/$ dmesg | grep "eth" [ 4.295929] usbcore: registered new interface driver ethub [ 18.736287] igb 0000:03:00.0: added PHC on eth0 [ 18.736294] igb 0000:03:00.0: eth0: (PCIe:2.5GT/s:Width x4) [ 18.736297] igb 0000:03:00.0 eth0: MAC: 00:1b:21:a7:42:9c [ 18.736640] igb 0000:03:00.0: eth0: PBA No: G18758-001 [ 18.900626] igb 0000:03:00.1: added PHC on eth1 [ 18.900635] igb 0000:03:00.1: eth1: (PCIe:2.5GT/s:Width x4) [ 18.900638] igb 0000:03:00.1 eth1: MAC: 00:1b:21:a7:42:9d [ 18.900941] igb 0000:03:00.1: eth1: PBA No: G18758-001 [ 20.237881] jme: JMicron JMC2XX ethernet driver version 1.0.8 [ 20.304867] bnx2 0000:01:00.0 eth2: Broadcom NetXtreme II BCM5716 1000Base-T (C0) PCI Express found at mem d8000000, IRQ 36, node addr 78:2b:cb:20:98:a7 [ 20.305773] bnx2 0000:01:00.1 eth3: Broadcom NetXtreme II BCM5716 1000Base-T (C0) PCI Express found at mem da000000, IRQ 48, node addr 78:2b:cb:20:98:a8 [ 23.591877] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 24.221221] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [ 25.778307] igb 0000:03:00.0 eth0: igb: eth0 NIC Link is Up 1000 Mbps Full Du plex, Flow Control: None [ 25.778465] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready painkiller895@DSMv2410-127:/$ painkiller895@DSMv2410-127:/$ lspci -k | grep 'Kernel driver' Kernel driver in use: pcieport Kernel driver in use: pcieport Kernel driver in use: pcieport Kernel driver in use: uhci_hcd Kernel driver in use: uhci_hcd Kernel driver in use: ehci-pci Kernel driver in use: uhci_hcd Kernel driver in use: uhci_hcd Kernel driver in use: uhci_hcd Kernel driver in use: uhci_hcd Kernel driver in use: ehci-pci Kernel driver in use: lpc_ich Kernel driver in use: ahci Kernel driver in use: bnx2 Kernel driver in use: bnx2 Kernel driver in use: igb Kernel driver in use: igb painkiller895@DSMv2410-127:/$ Looks like the bnx2 is missing a driver or file...