AmiroGarry Posted February 27, 2022 Share #1201 Posted February 27, 2022 thanks for the good hint. With 0.45 it works fine. Quote Link to comment Share on other sites More sharing options...
brickrat Posted February 27, 2022 Share #1202 Posted February 27, 2022 On 2/26/2022 at 7:12 PM, brickrat said: Hi I am still struggling with this. I have a MSI desktop board, so this should have 1 controller with 4 SATA ports Does not matter what options I use here I get either not disks found or some sata ports disabled. Can someone please assist and tell me what I have to enter in the config file. Any advice on this please? Quote Link to comment Share on other sites More sharing options...
AmiroGarry Posted February 27, 2022 Share #1203 Posted February 27, 2022 The network works with tinycore, but not with later boots. What do I have to compile for a network card Giga PHY Intel® I219V? Quote Link to comment Share on other sites More sharing options...
Dvalin21 Posted February 27, 2022 Share #1204 Posted February 27, 2022 49 minutes ago, brickrat said: Any advice on this please? Look for the Linux module for the Sata controller on the motherboard. If you can find anything then you can install 6.2.3, ssh in and lsmod to get all the modules being used. Post here and someone will be able to tell you what ext you need to add to the build for 7.0.1 Quote Link to comment Share on other sites More sharing options...
leopold Posted February 27, 2022 Share #1205 Posted February 27, 2022 I've finally decided to bite the bullet and try this loader, largely because I've just checked the energy usage of my Proxmox home lab and almost died of shock! So I've stuck this onto one of my ancient HP N54L boxes. And, frankly, it all seems far too easy... I'm waiting for the server to freeze or reboot or burst into flames or summon the evil pixies of Beelzebub or something. If this doesn't keel over in the next 48 hours, I'll be a very happy bunny indeed! Thanks to @pocopico et al for all your sterling work so far on this. If I can slash my home lab electricity costs enough, I might even be able to make a dent in the huge amount of cash I already owe the energy company Quote Link to comment Share on other sites More sharing options...
hendry Posted February 28, 2022 Share #1206 Posted February 28, 2022 On 2/15/2022 at 12:37 PM, hendry said: i follow the instruction step from this site https://github.com/pocopico/tinycore-redpill when i check the img file, it has not valid partition table. why ? fdisk -l /share/Public/XPE/syst/tinycore-redpill.v0.4.4_20220210_173245.img Disk /share/Public/XPE/syst/tinycore-redpill.v0.4.4_20220210_173245.img: 0 MB, 0 bytes 255 heads, 63 sectors/track, 0 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk /share/Public/XPE/syst/tinycore-redpill.v0.4.4_20220210_173245.img doesn't contain a valid partition table but i can open .img file using 7zip and see the partition table inside. i run the redpill script inside VM. anyone has some issue when compiling this loader ? why it seems not valid partition on the compiled img file ? Quote Link to comment Share on other sites More sharing options...
Dvalin21 Posted February 28, 2022 Share #1207 Posted February 28, 2022 @pocopico Brother I appreciate absolutely all the work and others that have contributed to this project. Everything has been awesome. I just need to ask the favor, please show me how to switch the download from china to global? Everyday, after like 2000 its a roll of the dice to try and download. Most times it doesnt download AT ALL. I've wondered why you still have it that way when DS3615xs downloads from the global download link. Either way, if you dont want to change, thats fine, but just show me how to change it. I've already tried and failed. No matter me changing the link and the md5 it keeps looking for the 256 key that was there so it makes me believe its also set somewhere else. Anyway, thanks in advances and please know I am grateful of your work. Quote Link to comment Share on other sites More sharing options...
Orphée Posted February 28, 2022 Share #1208 Posted February 28, 2022 (edited) 1 hour ago, Dvalin21 said: @pocopico Brother I appreciate absolutely all the work and others that have contributed to this project. Everything has been awesome. I just need to ask the favor, please show me how to switch the download from china to global? Everyday, after like 2000 its a roll of the dice to try and download. Most times it doesnt download AT ALL. I've wondered why you still have it that way when DS3615xs downloads from the global download link. Either way, if you dont want to change, thats fine, but just show me how to change it. I've already tried and failed. No matter me changing the link and the md5 it keeps looking for the 256 key that was there so it makes me believe its also set somewhere else. Anyway, thanks in advances and please know I am grateful of your work. Once you have the .pat file, you can store it on your computer, and before starting build, just create the foler : /home/tc/redpill-load/cache/ and with your favorite transfer tool (WinSCP) copy your .pat file with the right expected name. You will avoid china issue, and the need to re-download every time. Edited February 28, 2022 by Orphée Quote Link to comment Share on other sites More sharing options...
Marvx Posted February 28, 2022 Share #1209 Posted February 28, 2022 Hi all, I searched the whole forum and didn't find answer for my problem. I do all the USB key steps to set thing up and boot from USB. All is going good, find synlogy working well, i get the IP address and i start to installing the synology DSM_DS3615xs_42218.pat. On the screen it will start 10min countdown, then restart happen in about 2min in the installation and notebook again boot from the USB so i assume this is still good. But after 10min done it said "i cant find Synology something went wrong press to actualize!" . So i do press the button and ill get back to where i start and want me to start installation of synology DSM again. Ill tried different setup for SataPortMap or so but it didn't work with any. Currently i have setup "SataPortMap": "1", "DiskIdxMap": "0C" I have to say all HW and SW worked with JUN'S LOADER v1.03b - DS3615xs, DSM 6.2.3-25423 without any problems. Thanks for any help. Quote Link to comment Share on other sites More sharing options...
Indio Posted February 28, 2022 Share #1210 Posted February 28, 2022 Hi all, first, I would like to tank the xpenology team for the great work, and in this case, a special thanks to @pocopico. I am trying to install redpill in my HP DL80 with proxmox 7.1, and install DS918+ because of the SHR support but in the installation of the *.pat file I get an error: "Fail to install DSM, was not possible to format disk". Any suggestion how to solve this? Thanks. Quote Link to comment Share on other sites More sharing options...
maxime Posted February 28, 2022 Share #1211 Posted February 28, 2022 Hi! I finaly have my DS918+ working! There are many "problems" that I can't understand; sorry for this long pot, I hope you can help me. 1. My mainboard has 6 onboard sata ports; I tried to install Xpenology connecting only one HDD, but in this situation I was not able to install DSM. When I connected all 6 HDD, I was able to succesfully install DSM. Why? How can I solve this problem? I'm asking this because if I will need to run the system without a (broken) HDD, I'm afraid I will could not. https://www.dropbox.com/s/fa3wrzhr3ft3emf/sataerror.jpg?dl=0 https://www.dropbox.com/s/gizgdli6quz7pxg/satamap.jpg?dl=0 2. If I leave connected my SD Card reader, I can't write USB vendor ID on grub.cfg file. I had to fisically disconnect my SD card reader for correctly use my Sandisk USB pendrive https://www.dropbox.com/s/037cjtuayhptqi3/usbboot.jpg?dl=0 3. I'm not able to know which is the REAL Mac Address of my integrated lan NIC, because FAKE Synology Mac Adress is displayed. How can I know the REAL Mac Address? I have to use it for DHCP server prenotation and WOL https://www.dropbox.com/s/1requw76g5hskvk/macaddress.jpg?dl=0 https://www.dropbox.com/s/6xvlacqlmhpavs6/vendor.png?dl=0 This is my grub.cfg file: # # ### !!! WARNING - READ ME !!! ### # # DO NOT edit this file. This file has been generated automatically by the loader generator. # If you were asked to use a pre-made image and asked by someone to edit this file DO NOT do it. The only # supported method of obtaining the loader image is generating it using the loader generator provided. # terminal_output console if serial --unit=0 --speed=115200; then terminal_input --append serial_com0 terminal_output --append serial_com0 fi set default="0" set timeout="5" set timeout_style="menu" if [ -s $prefix/grubenv ]; then load_env --file $prefix/grubenv --skip-sig set has_env="1" if [ -n "${saved_entry}" ]; then set default="${saved_entry}" fi else set has_env="0" echo "WARN: failed to load env. Default choice will NOT be saved!" fi function savedefault { saved_entry="${chosen}" save_env --file $prefix/grubenv saved_entry } insmod usb_keyboard insmod part_msdos insmod ext2 insmod fat insmod linux insmod gzio set gfxmode=auto insmod vbe insmod vga # UEFI insmod efi_gop insmod efi_uga insmod font if loadfont ${prefix}/unicode.pf2 then insmod gfxterm set gfxmode=auto set gfxpayload=keep terminal_output gfxterm fi menuentry 'RedPill DS918+ v7.0.1-42218 (USB, Verbose)' { savedefault set root=(hd0,msdos1) echo Loading Linux... linux /zImage withefi earlyprintk syno_hw_version=DS918+ console=ttyS0,115200n8 netif_num=1 pid=0x5583 earlycon=uart8250,io,0x3f8,115200n8 syno_port_thaw=1 mac1=0011322A7C48 sn=1790PDN025020 vid=0x0781 elevator=elevator loglevel=15 HddHotplug=0 DiskIdxMap=00 syno_hdd_detect=0 vender_format_version=2 syno_hdd_powerup_seq=1 log_buf_len=32M root=/dev/md0 SataPortMap=6 echo Loading initramfs... initrd /rd.gz /custom.gz echo Starting kernel with USB boot } menuentry 'RedPill DS918+ v7.0.1-42218 (SATA, Verbose)' { savedefault set root=(hd0,msdos1) echo Loading Linux... linux /zImage withefi earlyprintk syno_hw_version=DS918+ console=ttyS0,115200n8 netif_num=1 pid=0x5583 earlycon=uart8250,io,0x3f8,115200n8 synoboot_satadom=2 syno_port_thaw=1 mac1=0011322AXXXX sn=1790PDN02XXXX vid=0x0781 elevator=elevator loglevel=15 HddHotplug=0 DiskIdxMap=00 syno_hdd_detect=0 vender_format_version=2 syno_hdd_powerup_seq=1 log_buf_len=32M root=/dev/md0 SataPortMap=6 echo Loading initramfs... initrd /rd.gz /custom.gz echo Starting kernel with SATA boot echo WARNING: SATA boot support on this platform is experimental! } menuentry 'Tiny Core Image Build' { savedefault set root=(hd0,msdos3) echo Loading Linux... linux /vmlinuz64 loglevel=3 cde waitusb=5 vga=791 echo Loading initramfs... initrd /corepure64.gz echo Booting TinyCore for loader creation } Quote Link to comment Share on other sites More sharing options...
altas Posted February 28, 2022 Share #1212 Posted February 28, 2022 Hi all, I searched the whole forum and didn't find answer for my problem. I do all the USB key steps to set thing up and boot from USB. All is going good, find synlogy working well, i get the IP address and i start to installing the synology DSM_DS3615xs_42218.pat. On the screen it will start 10min countdown, then restart happen in about 2min in the installation and notebook again boot from the USB so i assume this is still good. But after 10min done it said "i cant find Synology something went wrong press to actualize!" . So i do press the button and ill get back to where i start and want me to start installation of synology DSM again. Ill tried different setup for SataPortMap or so but it didn't work with any. Currently i have setup "SataPortMap": "1", "DiskIdxMap": "0C" I have to say all HW and SW worked with JUN'S LOADER v1.03b - DS3615xs, DSM 6.2.3-25423 without any problems. Thanks for any help. Use 3622xs instead of te 3615 Quote Link to comment Share on other sites More sharing options...
pocopico Posted February 28, 2022 Author Share #1213 Posted February 28, 2022 1 hour ago, Marvx said: Hi all, I searched the whole forum and didn't find answer for my problem. I do all the USB key steps to set thing up and boot from USB. All is going good, find synlogy working well, i get the IP address and i start to installing the synology DSM_DS3615xs_42218.pat. On the screen it will start 10min countdown, then restart happen in about 2min in the installation and notebook again boot from the USB so i assume this is still good. But after 10min done it said "i cant find Synology something went wrong press to actualize!" . So i do press the button and ill get back to where i start and want me to start installation of synology DSM again. Ill tried different setup for SataPortMap or so but it didn't work with any. Currently i have setup "SataPortMap": "1", "DiskIdxMap": "0C" I have to say all HW and SW worked with JUN'S LOADER v1.03b - DS3615xs, DSM 6.2.3-25423 without any problems. Thanks for any help. Do you select USB boot at grub and do you have correct VID:PID ? Also what extensions are you using ? These might not load correctly and might end up in this install loop. Quote Link to comment Share on other sites More sharing options...
Orphée Posted February 28, 2022 Share #1214 Posted February 28, 2022 @maxime your real mac address is the one you have when booting on tinycore OS. It is fake only when loading DSM loader. Quote Link to comment Share on other sites More sharing options...
Marvx Posted February 28, 2022 Share #1215 Posted February 28, 2022 18 minutes ago, pocopico said: Do you select USB boot at grub and do you have correct VID:PID ? Also what extensions are you using ? These might not load correctly and might end up in this install loop. Hi, thanks alot for your answer. And yes i doo use USB boot at grub. During USB boot i chose RedPill DS3615xs v7.0.1-42218 (USB, Verbose) option - so i hope that's correct For VID:PID i use ./rploader.sh identifyusb now during the USB key making as it should be. Quote Link to comment Share on other sites More sharing options...
Marvx Posted February 28, 2022 Share #1216 Posted February 28, 2022 32 minutes ago, altas said: Use 3622xs instead of te 3615 Whats the name of the build please for 3622xs?? bromolow-7.0.1-42218 - im using this DS3615xs ill tried this one but no success during compiling the USB boot broadwell-7.0.1-42218 - DS3617xs Quote Link to comment Share on other sites More sharing options...
maxime Posted February 28, 2022 Share #1217 Posted February 28, 2022 9 minutes ago, Orphée said: @maxime your real mac address is the one you have when booting on tinycore OS. It is fake only when loading DSM loader. Why I see the fake Mac Address in the bios? mac on Bios and mac on DSM are the same! I expeted to have REAL mac on bios and fake mac on DSM... 🤔 Quote Link to comment Share on other sites More sharing options...
altas Posted February 28, 2022 Share #1218 Posted February 28, 2022 I had the same on ds3615 with from vid/pidI never got it solvedOnly switch to 3622xs solved it Quote Link to comment Share on other sites More sharing options...
altas Posted February 28, 2022 Share #1219 Posted February 28, 2022 For 3622xs use broadwellnk Quote Link to comment Share on other sites More sharing options...
Marvx Posted February 28, 2022 Share #1220 Posted February 28, 2022 Just now, altas said: For 3622xs use broadwellnk should i generate the serial number specific for this one aswell?? Change you serial and mac address by running ./rploader.sh serialgen DS3622xs ?? Thanks Quote Link to comment Share on other sites More sharing options...
maxime Posted February 28, 2022 Share #1221 Posted February 28, 2022 2 minutes ago, altas said: I had the same on ds3615 with from vid/pid I never got it solved Only switch to 3622xs solved it Altas, were you talking to me? What problem were you referring to? Quote Link to comment Share on other sites More sharing options...
altas Posted February 28, 2022 Share #1222 Posted February 28, 2022 Yes for the 3622 you need other serial Quote Link to comment Share on other sites More sharing options...
altas Posted February 28, 2022 Share #1223 Posted February 28, 2022 Altas, were you talking to me? What problem were you referring to? Same as you Quote Link to comment Share on other sites More sharing options...
Marvx Posted February 28, 2022 Share #1224 Posted February 28, 2022 44 minutes ago, altas said: I had the same on ds3615 with from vid/pid I never got it solved Only switch to 3622xs solved it BIG THANKS it worked Quote Link to comment Share on other sites More sharing options...
altas Posted February 28, 2022 Share #1225 Posted February 28, 2022 BIG THANKS it worked Greate News!! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.