NoFate Posted January 20, 2022 Share #451 Posted January 20, 2022 (edited) ok, got it,the script proposed me sataport 1 , but i changed to 2 , now it installs Edited January 20, 2022 by NoFate Quote Link to comment Share on other sites More sharing options...
DerMoeJoe Posted January 20, 2022 Share #452 Posted January 20, 2022 ive tested it.. on esxi after converting the vmdk its not bootable. within vmware workstation it is booting. but within the tinycorelinux ive got a couple of problems.. ssh is not installed and enabled. after installing openssh and enabling/starting it this works. next problem is that the scripts arent executeable after transfering them with chmod +x rploader.sh this is done. but unable to start them after, cause the env variables for starting bash scripts isnt setup properly.. after doing this i only got a lot of warnings within the rploader.sh script in a couple of lines... tested with the acutally newest verision from the repo (9days old v0.4.4) Quote Link to comment Share on other sites More sharing options...
altas Posted January 20, 2022 Share #453 Posted January 20, 2022 (edited) The vmdk on github has a problem to boot with ESXi But it exist an esxi ssh command to fix this Nee do check what i have used * vmkfstools -i "hdd.vmdk" "fixed-hdd.vmdk" -d thin http://www.das-werkstatt.com/forum/werkstatt/viewtopic.php?t=2156 * Edited January 20, 2022 by altas Quote Link to comment Share on other sites More sharing options...
Unregistrado Posted January 20, 2022 Share #454 Posted January 20, 2022 21 minutes ago, DerMoeJoe said: ive tested it.. on esxi after converting the vmdk its not bootable. within vmware workstation it is booting. but within the tinycorelinux ive got a couple of problems.. ssh is not installed and enabled. after installing openssh and enabling/starting it this works. next problem is that the scripts arent executeable after transfering them with chmod +x rploader.sh this is done. but unable to start them after, cause the env variables for starting bash scripts isnt setup properly.. after doing this i only got a lot of warnings within the rploader.sh script in a couple of lines... tested with the acutally newest verision from the repo (9days old v0.4.4) I did it the hard and slow way by converting the image file with Starwind V2V converter, you get an vmdk and vmdk flat file. They just work. Quote Link to comment Share on other sites More sharing options...
Dvalin21 Posted January 20, 2022 Share #455 Posted January 20, 2022 @killseeker I tried, still nothing. When running satamap nothing. Here is the build ran. tc@box:~$ sudo ./rploader.sh build broadwell-7.0.1-42218 jq: error (at <stdin>:1): Cannot iterate over null (null) jq: error (at <stdin>:1): Cannot iterate over null (null) Loader source : https://github.com/jimmyGALLAND/redpill-load.git Loader Branch : develop Redpill module source : https://github.com/jimmyGALLAND/redpill-lkm.git : Redpill module branch : develop Extensions : Extensions URL : TOOLKIT_URL : https://sourceforge.net/projects/dsgpl/files/toolkit/DSM7.0/ds.broadwell-7.0.dev.txz/download TOOLKIT_SHA : e050987fbbab0c246aff2af935b1d8a4140ce490915aa4c92f3c8d163eea970c SYNOKERNEL_URL : https://sourceforge.net/projects/dsgpl/files/Synology NAS GPL Source/25426branch/broadwell-source/linux-3.10.x.txz/download SYNOKERNEL_SHA : d3e85eb80f16a83244fcae6016ab6783cd8ac55e3af2b4240455261396e1e1be COMPILE_METHOD : toolkit_dev TARGET_PLATFORM : broadwell TARGET_VERSION : 7.0.1 TARGET_REVISION : 42218 REDPILL_LKM_MAKE_TARGET : dev-v7 Checking Internet Access -> OK Checking if a newer version exists on the repo -> Version is current Redpill sources already downloaded, pulling latest Already up to date. Loader sources already downloaded, pulling latest Already up to date. Using static compiled redpill extension Looking for redpill for : ds3617xs_42218 Getting file https://raw.githubusercontent.com/pocopico/rp-ext/master/redpill/releases/redpill-4.4.180plus-broadwell.tgz Extracting module Got redpill-linux-v4.4.180+.ko Testing modules.alias.json -> File OK ------------------------------------------------------------------------------------------------ It looks that you will need the following modules : Found SATA Controller : pciid 8086d00001d02 Required Extension : ahci Searching for matching extension for ahci [#] Checking runtime for required tools... [OK] [#] Adding new extension from https://raw.githubusercontent.com/pocopico/rp-ext/master/tg3/rpext-index.json... [#] Downloading remote file https://raw.githubusercontent.com/pocopico/rp-ext/master/tg3/rpext-index.json to /home/tc/redpill-load/custom/extensions/_new_ext_index.tmp_json ######################################################################## 100.0% [!] Extension is already added (index exists at /home/tc/redpill-load/custom/extensions/pocopico.tg3/pocopico.tg3.json). For more info use "ext-manager.sh info pocopico.tg3" *** Process will exit *** Found Ethernet Interface : pciid 14e4d0000165f Required Extension : tg3 Searching for matching extension for tg3 Found matching extension : "https://raw.githubusercontent.com/pocopico/rp-ext/master/tg3/rpext-index.json" [#] Checking runtime for required tools... [OK] [#] Adding new extension from https://raw.githubusercontent.com/pocopico/rp-ext/master/tg3/rpext-index.json... [#] Downloading remote file https://raw.githubusercontent.com/pocopico/rp-ext/master/tg3/rpext-index.json to /home/tc/redpill-load/custom/extensions/_new_ext_index.tmp_json ######################################################################## 100.0% [!] Extension is already added (index exists at /home/tc/redpill-load/custom/extensions/pocopico.tg3/pocopico.tg3.json). For more info use "ext-manager.sh info pocopico.tg3" *** Process will exit *** Found Ethernet Interface : pciid 14e4d0000165f Required Extension : tg3 Searching for matching extension for tg3 Found matching extension : "https://raw.githubusercontent.com/pocopico/rp-ext/master/tg3/rpext-index.json" Found VGA Controller : pciid 102bd00000534 Required Extension : mgag200 Searching for matching extension for mgag200 ------------------------------------------------------------------------------------------------ Starting loader creation Checking user_config.json : Done [#] Checking runtime for required tools... [OK] [#] Updating extensions... [#] Checking runtime for required tools... [OK] [#] Extension thethorgroup.jg.virtio is already installed from https://raw.githubusercontent.com/jimmyGALLAND/redpill-ext/master/virtio/rpext-index.json [#] Checking runtime for required tools... [OK] [#] Updating pocopico.aacraid extension... [#] Downloading remote file https://raw.githubusercontent.com/pocopico/rp-ext/master/aacraid/rpext-index.json to /home/tc/redpill-load/custom/extensions/_new_ext_index.tmp_json ############################################################################################ 100.0% [#] Extension pocopico.aacraid index is already up to date [#] Updating pocopico.megaraid_sas extension... [#] Downloading remote file https://raw.githubusercontent.com/pocopico/rp-ext/master/megaraid_sas/rpext-index.json to /home/tc/redpill-load/custom/extensions/_new_ext_index.tmp_json ############################################################################################ 100.0% [#] Extension pocopico.megaraid_sas index is already up to date [#] Updating pocopico.tg3 extension... [#] Downloading remote file https://raw.githubusercontent.com/pocopico/rp-ext/master/tg3/rpext-index.json to /home/tc/redpill-load/custom/extensions/_new_ext_index.tmp_json ############################################################################################ 100.0% [#] Extension pocopico.tg3 index is already up to date [#] Updating thethorgroup.jg.virtio extension... [#] Downloading remote file https://raw.githubusercontent.com/jimmyGALLAND/redpill-ext/master/virtio/rpext-index.json to /home/tc/redpill-load/custom/extensions/_new_ext_index.tmp_json ############################################################################################ 100.0% [#] Extension thethorgroup.jg.virtio index is already up to date [#] Updating thethorgroup.jg.virtio extension... [OK] [#] Checking runtime for required tools... [OK] [#] Updating ds3617xs_42218 platforms extensions... [#] Downloading remote file https://raw.githubusercontent.com/pocopico/rp-ext/master/aacraid/releases/ds3617xs_42218.json to /home/tc/redpill-load/custom/extensions/_ext_new_rcp.tmp_json ############################################################################################ 100.0% [#] Filling-in newly downloaded recipe for extension pocopico.aacraid platform ds3617xs_42218 [#] Downloading remote file https://raw.githubusercontent.com/pocopico/rp-ext/master/aacraid/releases/aacraid-4.4.180plus-broadwell.tgz to /home/tc/redpill-load/custom/extensions/pocopico.aacraid/ds3617xs_42218/aacraid-4.4.180plus-broadwell.tgz ############################################################################################ 100.0% [#] Verifying /home/tc/redpill-load/custom/extensions/pocopico.aacraid/ds3617xs_42218/aacraid-4.4.180plus-broadwell.tgz file... [OK] [#] Unpacking files from /home/tc/redpill-load/custom/extensions/pocopico.aacraid/ds3617xs_42218/aacraid-4.4.180plus-broadwell.tgz to /home/tc/redpill-load/custom/extensions/pocopico.aacraid/ds3617xs_42218/... [OK] [#] Downloading remote file https://raw.githubusercontent.com/pocopico/rp-ext/master/aacraid/src/check-aacraid.sh to /home/tc/redpill-load/custom/extensions/pocopico.aacraid/ds3617xs_42218/check-aacraid.sh ############################################################################################ 100.0% [#] Verifying /home/tc/redpill-load/custom/extensions/pocopico.aacraid/ds3617xs_42218/check-aacraid.sh file... [OK] [#] Successfully processed recipe for extension pocopico.aacraid platform ds3617xs_42218 [#] Downloading remote file https://raw.githubusercontent.com/pocopico/rp-ext/master/megaraid_sas/releases/ds3617xs_42218.json to /home/tc/redpill-load/custom/extensions/_ext_new_rcp.tmp_json ############################################################################################ 100.0% [#] Extension pocopico.megaraid_sas for ds3617xs_42218 platform is already up to date [#] Downloading remote file https://raw.githubusercontent.com/pocopico/rp-ext/master/tg3/releases/ds3617xs_42218.json to /home/tc/redpill-load/custom/extensions/_ext_new_rcp.tmp_json ############################################################################################ 100.0% [#] Extension pocopico.tg3 for ds3617xs_42218 platform is already up to date [#] Downloading remote file https://github.com/jimmyGALLAND/redpill-ext/raw/master/virtio/ds3617xs_42218.json to /home/tc/redpill-load/custom/extensions/_ext_new_rcp.tmp_json ############################################################################################ 100.0%############################################################################################ 100.0% [#] Extension thethorgroup.jg.virtio for ds3617xs_42218 platform is already up to date [#] Verifying /home/tc/redpill-load/custom/extensions/pocopico.aacraid/ds3617xs_42218/check-aacraid.sh file... [OK] [#] Updating extensions... [OK] [#] PAT file /home/tc/redpill-load/cache/ds3617xs_42218.pat not found - downloading from https://cndl.synology.cn/download/DSM/release/7.0.1/42218/DSM_DS3617xs_42218.pat % Total % Received % Xferd Average Speed Time Time Time Current Dload Upload Total Spent Left Speed 100 343M 100 343M 0 0 7242k 0 0:00:48 0:00:48 --:--:-- 7517k [#] Verifying /home/tc/redpill-load/cache/ds3617xs_42218.pat file... [OK] [#] Unpacking /home/tc/redpill-load/cache/ds3617xs_42218.pat file to /home/tc/redpill-load/build/1642716473/pat-ds3617xs_42218-unpacked... [OK] [#] Verifying /home/tc/redpill-load/build/1642716473/pat-ds3617xs_42218-unpacked/zImage file... [OK] [#] Patching /home/tc/redpill-load/build/1642716473/pat-ds3617xs_42218-unpacked/zImage to /home/tc/redpill-load/build/1642716473/zImage-patched... [OK] [#] Verifying /home/tc/redpill-load/build/1642716473/pat-ds3617xs_42218-unpacked/rd.gz file... [OK] [#] Unpacking /home/tc/redpill-load/build/1642716473/pat-ds3617xs_42218-unpacked/rd.gz file to /home/tc/redpill-load/build/1642716473/rd-ds3617xs_42218-unpacked... [OK] [#] Apply patches to /home/tc/redpill-load/build/1642716473/rd-ds3617xs_42218-unpacked... [OK] [#] Patching config files in ramdisk... [OK] [#] Adding OS config patching... [OK] [#] Repacking ramdisk to /home/tc/redpill-load/build/1642716473/rd-patched-ds3617xs_42218.gz... [OK] [#] Bundling extensions... [#] Checking runtime for required tools... [OK] [#] Dumping ds3617xs_42218 platform extensions to /home/tc/redpill-load/build/1642716473/custom-initrd/exts... [OK] [#] Packing custom ramdisk layer to /home/tc/redpill-load/build/1642716473/custom.gz... [OK] [#] Generating GRUB config... [OK] [#] Creating loader image at loader.img... [OK] [#] Cleaning up... [OK] Mounting /dev/sda1 to localdiskp1 Mounting /dev/sda2 to localdiskp2 Creating tinycore entry menuentry 'Tiny Core Image Build' { savedefault set root=(hd0,msdos3) echo Loading Linux... linux /vmlinuz64 loglevel=3 cde waitusb=5 vga=791 echo Loading initramfs... initrd /corepure64.gz echo Booting TinyCore for loader creation } Entries in Localdisk bootloader : ======================================================================= menuentry 'RedPill DS3617xs v7.0.1-42218 Beta (USB, Verbose)' { menuentry 'RedPill DS3617xs v7.0.1-42218 Beta (SATA, Verbose)' { menuentry 'Tiny Core Image Build' { 1 Quote Link to comment Share on other sites More sharing options...
killseeker Posted January 21, 2022 Share #456 Posted January 21, 2022 5 hours ago, Dvalin21 said: I tried, still nothing. When running satamap nothing. Here is the build ran. That's a shame dude Curiously, have you tried 3615XS?. I know between my two NAS's both have MPT 3 Raid controllers, one detected on 3615XS the other on 3617XS didn't. Perhaps its a 3617XS compatibility problem? I wasnt able to try 3615 on the one that didnt work with 3617XS yet. 1 Quote Link to comment Share on other sites More sharing options...
Dvalin21 Posted January 21, 2022 Share #457 Posted January 21, 2022 16 minutes ago, killseeker said: That's a shame dude Curiously, have you tried 3615XS?. I know between my two NAS's both have MPT 3 Raid controllers, one detected on 3615XS the other on 3617XS didn't. Perhaps its a 3617XS compatibility problem? I wasnt able to try 3615 on the one that didnt work with 3617XS yet. Im going to try 3615xs right now. You could be right with the compatibility (hoping not, but looks like it). @pocopico Quote Link to comment Share on other sites More sharing options...
Dvalin21 Posted January 21, 2022 Share #458 Posted January 21, 2022 @killseeker @pocopico I can't even get DS3615xs to even boot Quote Link to comment Share on other sites More sharing options...
NoFate Posted January 21, 2022 Share #459 Posted January 21, 2022 Thn for all support guys yesterday, 7 is now running on my esxi!! Quote Link to comment Share on other sites More sharing options...
sojab0on Posted January 21, 2022 Share #460 Posted January 21, 2022 (edited) 2 hours ago, NoFate said: Thn for all support guys yesterday, 7 is now running on my esxi!! Mine is no installed but hopefully itwill get past the 10minutes counter and boot trough completly, then i hope i can just put the vm drives of my old dsm 6 vm to the dsm7 vm and get everything up and running And it did not it failed somewhere during the 10 minute count down atthe end it gone to something went worng and now its reloading Any one can help here, It keeps gooing back to recoverable with the 7.0.1-42218 broadwell package the bromolow package doest even boot VM Config 4vcpus 8GB ram 50GB sata drive clean on Sata conroller 0:0 it detects it the 1GB boot vmdk on sata 1:0 it boot fine from it to the Sata shim version but the vm will indefinately reload the pat file and timer Edited January 21, 2022 by sojab0on changes mad to show unsuccessfull install on esxi 7 Quote Link to comment Share on other sites More sharing options...
Unregistrado Posted January 21, 2022 Share #461 Posted January 21, 2022 1 hour ago, sojab0on said: Mine is no installed but hopefully itwill get past the 10minutes counter and boot trough completly, then i hope i can just put the vm drives of my old dsm 6 vm to the dsm7 vm and get everything up and running And it did not it failed somewhere during the 10 minute count down atthe end it gone to something went worng and now its reloading Any one can help here, It keeps gooing back to recoverable with the 7.0.1-42218 broadwell package the bromolow package doest even boot VM Config 4vcpus 8GB ram 50GB sata drive clean on Sata conroller 0:0 it detects it the 1GB boot vmdk on sata 1:0 it boot fine from it to the Sata shim version but the vm will indefinately reload the pat file and timer Put the vmdk on sata0 and 0:0 and your data drive on 1:0. Then it will surely work Quote Link to comment Share on other sites More sharing options...
sojab0on Posted January 21, 2022 Share #462 Posted January 21, 2022 1 minute ago, Unregistrado said: Put the vmdk on sata0 and 0:0 and your data drive on 1:0. Then it will surely work i did but chaned it over and rebuild the loader for de 3615xs No i am facing the issue that the data drives from my old nas 4x3TB and 1 1.5TB are not initialized and i dont want to lose 9TB worth of data including pictures is there away to get then initialized without frmating them Quote Link to comment Share on other sites More sharing options...
Unregistrado Posted January 21, 2022 Share #463 Posted January 21, 2022 9 minutes ago, sojab0on said: i did but chaned it over and rebuild the loader for de 3615xs No i am facing the issue that the data drives from my old nas 4x3TB and 1 1.5TB are not initialized and i dont want to lose 9TB worth of data including pictures is there away to get then initialized without frmating them You can create the pool without any problem (not volume!!!!!). Then you will have to repair the installation partition. That is also ok. Did this yesterday and didn’t lose any data. Quote Link to comment Share on other sites More sharing options...
sojab0on Posted January 21, 2022 Share #464 Posted January 21, 2022 1 minute ago, Unregistrado said: You can create the pool without any problem (not volume!!!!!). Then you will have to repair the installation partition. That is also ok. Did this yesterday and didn’t lose any data. when i tried to create a pool it stated it needed to format drives Can it be that the old nas is a 3617xs and new one 3615xs also the old one runs DSM-6.3.2-25462 new one 7.0.1-42218 i will try to do it later to day again and check the message and snip it to add to here Quote Link to comment Share on other sites More sharing options...
Unregistrado Posted January 21, 2022 Share #465 Posted January 21, 2022 4 hours ago, sojab0on said: when i tried to create a pool it stated it needed to format drives Can it be that the old nas is a 3617xs and new one 3615xs also the old one runs DSM-6.3.2-25462 new one 7.0.1-42218 i will try to do it later to day again and check the message and snip it to add to here My harddrives came from an DS918+ 6.2 and went into a DS3615XS 7.0.1. I also got the warning that it would reformat my disks when I wanted to fix the volume so certainly don’t do this. But when you check the pool, it found the pool. It recognised it as a raid 1 and I just had to restore the pool and it automatically finds the volume. I forgot to printscreen it. I will check if I can find a way to recreate it and will send a printscreen. Because I am not sure how stable it is, I am running two systems at the moment. Quote Link to comment Share on other sites More sharing options...
sojab0on Posted January 21, 2022 Share #466 Posted January 21, 2022 Just now, Unregistrado said: My harddrives came from an DS918+ 6.2 and went into a DS3615XS 7.0.1. I also got the warning that it would reformat my disks when I wanted to fix the volume so certainly don’t do this. But when you check the pool, it found the pool. It recognised it as a raid 1 and I just had to restore the pool and it automatically finds the volume. I forgot to printscreen it. I will check if I can find a way to recreate it and will send a printscreen. Because I am not sure how stable it is, I am running two systems at the moment. after a reboot the system suddenly saw that there wehre volumes on the disks to be reused and activated afterwards it all worked all share where back only the apps and stuff needs to be backuped and so on Quote Link to comment Share on other sites More sharing options...
gorski Posted January 21, 2022 Share #467 Posted January 21, 2022 on ds3617xs real hardware ... [ 407.151528] <redpill/smart_shim.c:352> ATA_CMD_ID_ATA confirmed SMART support - noop [ 407.166645] <redpill/smart_shim.c:352> ATA_CMD_ID_ATA confirmed SMART support - noop [ 411.108241] <redpill/smart_shim.c:352> ATA_CMD_ID_ATA confirmed SMART support - noop [ 411.123369] <redpill/smart_shim.c:352> ATA_CMD_ID_ATA confirmed SMART support - noop [ 415.736932] <redpill/smart_shim.c:352> ATA_CMD_ID_ATA confirmed SMART support - noop [ 415.752075] <redpill/smart_shim.c:352> ATA_CMD_ID_ATA confirmed SMART support - noop [ 415.777734] EXT4-fs (md0): couldn't mount as ext3 due to feature incompatibilities [ 415.787018] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null) [ 415.970677] EXT4-fs (md0): couldn't mount as ext3 due to feature incompatibilities [ 415.979747] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null) [ 415.997792] EXT4-fs (md0): couldn't mount as ext3 due to feature incompatibilities [ 416.006877] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null) [ 416.053213] md0: detected capacity change from 2549940224 to 0 [ 416.059078] md: md0: set sda1 to auto_remap [0] [ 416.063644] md: md0 stopped. [ 416.066555] md: unbind<sda1> [ 416.074927] md: export_rdev(sda1) [ 416.085716] md1: detected capacity change from 2147418112 to 0 [ 416.091608] md: md1: set sda2 to auto_remap [0] [ 416.096164] md: md1 stopped. [ 416.099075] md: unbind<sda2> [ 416.104939] md: export_rdev(sda2) [ 419.127199] md: bind<sda1> [ 419.130065] md/raid1:md0: active with 1 out of 16 mirrors [ 419.135783] md0: detected capacity change from 0 to 2549940224 [ 422.144399] md: bind<sda2> [ 422.147276] md/raid1:md1: active with 1 out of 16 mirrors [ 422.152980] md1: detected capacity change from 0 to 2147418112 [ 422.336940] EXT4-fs (md0): couldn't mount as ext3 due to feature incompatibilities [ 422.345577] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null) [ 422.514835] <redpill/pmu_shim.c:310> Got 1 bytes from PMU: reason=1 hex={2d} ascii="-" [ 422.664840] <redpill/pmu_shim.c:310> Got 1 bytes from PMU: reason=1 hex={72} ascii="r" [ 422.667456] EXT4-fs (md0): couldn't mount as ext3 due to feature incompatibilities [ 422.668419] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null) [ 422.688070] <redpill/pmu_shim.c:239> Executing cmd OUT_SCHED_UP_OFF handler cmd_shim_noop+0x0/0x30 [redpill] [ 422.697966] <redpill/pmu_shim.c:45> vPMU received OUT_SCHED_UP_OFF using 1 bytes - NOOP [ 422.716069] EXT4-fs (md0): couldn't mount as ext3 due to feature incompatibilities [ 422.724617] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null) this is result when i choose ds3617xs_42218.pat and start to install disk station manager because of this may be i unable to install ds3617xs ... and i not know what to fix that ... Greets, Gorski Quote Link to comment Share on other sites More sharing options...
Unregistrado Posted January 21, 2022 Share #468 Posted January 21, 2022 1 hour ago, sojab0on said: after a reboot the system suddenly saw that there wehre volumes on the disks to be reused and activated afterwards it all worked all share where back only the apps and stuff needs to be backuped and so on If you use the 50 Gb vmdk, and install everything on that disk on dsm 6.x. You can move the packages and so on to that disk. Then you create a dsm 7.x with a new vmdk disk that is big enough. Then you disconnect the harddrives from dsm 6.x. You remove the defected storage pool. You setup a migration from dsm 6.x to dsm 7. It copies everything, users, packages, to the Ddm 7. Then you attach your hdds back to dsm 7. After reboot it recognises the storage pool. Then you have your data back. Then you repair the installation partition on your disks. And everything is back as it was. Probably the slow and hard way. But it works. https://veducate.co.uk/synology-moving-a-package-between-volumes/ Quote Link to comment Share on other sites More sharing options...
Kaneske Posted January 21, 2022 Share #469 Posted January 21, 2022 Wow cool way to get a bit less nervous in updating to the new Version… Since I took the even harder way: Backup, Install, destroy…try error repeat, learn…try succeed recopy, pray, resync data from cloud…pray again…reconfigure external disk to raid 1 instead of raid 0…cop again…stop praying. Sleep well… Quote Link to comment Share on other sites More sharing options...
Franks4fingers Posted January 21, 2022 Share #470 Posted January 21, 2022 On 1/17/2022 at 9:32 PM, pocopico said: Hi, system partitions are RAID1 arrays accross every configured disk of your DSM. They are always /dev/md0 and /dev/md1 and consist always of partitions 1 and 2 of the disks e.g. /dev/sdd1 2048 4982527 4980480 2.4G fd Linux raid autodetect /dev/sdd2 4982528 9176831 4194304 2G fd Linux raid autodetect partition 1 is the root file system and partition 2 is the swap partition. You can verify its status by running : mdadm --detail /dev/md0 mdadm --detail /dev/md1 It happens that the array is missing some of your disks partitions and then it reports that the System partition is failed on some disks. You should check the sizes for your partitions and if the match the above then you can add them to the system array and/or swap array by executing mdadm /dev/md0 add </dev/your disk partition1> or mdadm /dev/md1 add </dev/your disk partition2> @pocopico - Took me a while to get back to this as life got in the way. I have checked the disks and get the following detail. Based on this detail, they don't seem to match what my disk config shows, should / can I use the command you provided or should I look to do something different? Any pointers from you or the community would be great. Other than this one issue, everything else is running great and stable. Quote Link to comment Share on other sites More sharing options...
Dvalin21 Posted January 22, 2022 Share #471 Posted January 22, 2022 Ok, I found my pciid 0x1000|0x0073|0x1028|0x1F4E any help would be appreciated. Quote Link to comment Share on other sites More sharing options...
Dvalin21 Posted January 22, 2022 Share #472 Posted January 22, 2022 Hey I noticed while trying to build DS3617xs, it fails do to a checksum mismatch when downloading the pat file. Quote Link to comment Share on other sites More sharing options...
pocopico Posted January 22, 2022 Author Share #473 Posted January 22, 2022 13 hours ago, Franks4fingers said: @pocopico - Took me a while to get back to this as life got in the way. I have checked the disks and get the following detail. Based on this detail, they don't seem to match what my disk config shows, should / can I use the command you provided or should I look to do something different? Any pointers from you or the community would be great. Other than this one issue, everything else is running great and stable. Hi, and how many disks do you have ? Can you check with mdadm —detail /dev/md2 ? Quote Link to comment Share on other sites More sharing options...
dvbmaniak Posted January 22, 2022 Share #474 Posted January 22, 2022 (edited) Quote CPU - Intel® Dual-Core Processor N3050 (Up to 2.16 GHz) Memory - 2GB DDR3L-1600MHz Chipset - Intel® N3050 SoC -2 x 2.5" SATA HDD - Gigabit LAN Realtek Quote mint@mint:~$ lspci 00:00.0 Host bridge: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series SoC Transaction Register (rev 21) 00:02.0 VGA compatible controller: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Integrated Graphics Controller (rev 21) 00:13.0 SATA controller: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series SATA Controller (rev 21) 00:14.0 USB controller: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series USB xHCI Controller (rev 21) 00:1a.0 Encryption controller: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series Trusted Execution Engine (rev 21) 00:1c.0 PCI bridge: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series PCI Express Port #1 (rev 21) 00:1c.1 PCI bridge: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series PCI Express Port #2 (rev 21) 00:1f.0 ISA bridge: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series PCU (rev 21) 00:1f.3 SMBus: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx SMBus Controller (rev 21) 02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 11) mint@mint:~$ I tested the redpill-DS918 + _7.0.1-42218 image (DSM_DS918+_42218.pat) (i found img image on the net, i just changed vid pid sn mac and satamap) on the physical Asrock Beebox N3050 (NUC) machine, sataportmap 2 configuration, installation and configuration works fine, sleep after 10 minutes works fine, WOL works fine, data space creation ok. nuc + 2x2.5 hdd 1TB + 1 usb boot sleep 4W run idle 8W max 15W when it boots up or performs heavy work. The only problem I have noticed so far is that sometimes the network card shows 100MB and sometimes 1 Gigabit, my entire network is 1 Gigabit and the cable is functional and tested on other devices. I also tested 2 older machines (laptops) 2gen intel (dell e6320) and 4gen (fujitsu e734), unfortunately, there were still problems with supposedly damaged disks Edited January 22, 2022 by dvbmaniak Quote Link to comment Share on other sites More sharing options...
kiberboi Posted January 22, 2022 Share #475 Posted January 22, 2022 Have you guys had any luck with Lets Encrypt SSL certificate? It shows as Not Secure: I have created DDNS with Duck DNS sucessfully. Ports are open both in router and DSM firewall. Certificate is created with Lets Encrypt: Redirect to HTTPS is turned on I'm not sure what's the problem here? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.