Jump to content
XPEnology Community

Unregistrado

Member
  • Posts

    58
  • Joined

  • Last visited

Everything posted by Unregistrado

  1. - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 7.2.1 69057-Update 2 - DSM version AFTER update: DSM 7.2.1 69057-Update 3 - Loader version and model: ARPL-i18n v23.9.7 DS3622xs+ - Using custom extra.lzma: NO - Installation type: Running on esxi Notes - manual update, required reboot
  2. I got also back online but used arc loader. TCRP loader is a great loader. But I saw some interesting stuff in the arc loader. Like downgrading, forced reinstall, reset admin password. Don’t know if Pocopico is going to add this stuff? I didn’t get the result that I expected with the webbrowser builder of TCRP. But it is really great, straightforward, the way to go! Some feedback, the building log stands in the way when I want to push the builder button. I used Firefox on w10 machine. So certainly great job!
  3. Now i cant rebuild the loader. <br>extracommands : <br>Could not determine if file ds3622xsp_64561.pat is encrypted or not, maybe corrupted -rw-r--r-- 1 tc staff 3322 Jun 8 10:15 ds3622xsp_64561.pat <br>041
  4. Tried to update ds3622xs+ to 7.2 using webinterface but doesn't recognize any harddrive connected to HBA card LSI SAS2008. Tried also the ds3617xs+ same result.
  5. I had two storage pools. One failed and off course my config was on this one, so luckily data is safe. I configured 2 way verification. In an original synology you can reset the nas in what they call a modus 1 reset. So can this be done with xpenology TCRP?
  6. When you are in that screen you can press "e" and change the grub file.
  7. If i am not mistaken SAS2008 and flashed to IT mode latest software version.
  8. I have a 3622 xpenology and it does work. i have 17 TB in SHR.
  9. I tried it also and downloaded the pat file from synology directly. And that one does work.
  10. You need to remap the drives. When using a lsi card what I understood is it will always start one disk higher.
  11. It is even easier then this. When you create a PO account you get an emailadress that you use to receive mails. So just use this pomail.net mailadress as where the notification have to be sent to.
  12. You need real sn and mac. I was looking into a docker machine that picks up some mails and send them by pushover messages. https://github.com/YoRyan/smtp-translator
  13. Ikky_phoenix is totally right in the way he edits the sata remap. And it is the same for sataportmap and other settings in grub. As soon as grub starts push letter e on keyboard. Alter values of sataportmap and what not. Try to boot, if everything is as you wish, start tinycore again alter the values you need, build and reboot. If you are not satisfied with the result just reboot and push e again alter till you get it right.
  14. As it is more cosmetics you really don’t need it. It is interesting when you have more drives. Easier to find which one needs to be replaced …
  15. The other drives are just in the right place. It is just to make sure that drives are following up and you don’t have any gaps between your harddrive connected to different controllers. This was done in older versions also but syntax is different now. So you can see and read more in following link.
  16. sudo ./rploader.sh build apollolake-7.0.1-42218 sudo ./rploader.sh build bromolow-7.0.1-42218 Or read this: https://xpenology.club/install-dsm-7-on-baremetal-or-vm/
  17. Ed_co, just check this website: https://xpenology.club/install-dsm-7-on-baremetal-or-vm/ please make sure you check with a spare hdd and usb stick. If you can install dsm 7 on your system then you will know that hardware is supported or not.
  18. Perfect, as this is ment for developers and not ready you could test all the things you want and help the community out with your test rig. Quickconnect is impossible without a real sn and mac. And even this is not advised by anyone.
  19. For me the passtrough in esxi just works but only with DS3615XS not with the DS918+. I added the mpt2sas drivers. PCI ID for my lsi card is 1000:0072. There is something fishy with esxi 7, when the passtrough is enabled and i reboot the host machine. The pci card can't be enabled. So i have to disable the passtrough. Reboot the host. And then i can enable paastrough of my hba card without the need of a reboot.
  20. For appololake with mpt2sas only it won't load. Loading kmod #0 "raid_class.ko" for pocopico.mpt2sas (args: ) Loading kmod #1 "scsi_transport_sas.ko" for pocopico.mpt2sas (args: ) Loading kmod #2 "mpt2sas.ko" for pocopico.mpt2sas (args: ) [ 1.938494] mpt3sas: Unknown rela relocation: 4 [ 1.939285] mpt3sas: Unknown rela relocation: 4 insmod: can't insert 'mpt2sas.ko': invalid module format ERROR: kernel extensions "mpt2sas.ko" from pocopico.mpt2sas failed to load Exit on error [99] rp ext init exec failure... Mon Jan 24 21:03:02 UTC 2022 none /sys/kernel/debug debugfs rw,relatime 0 0 umount: /etc/mtab: No such file or directory linuxrc.syno failed on 99 And with mpt3sas only also not loaded. Running "check-mpt3sas.sh" for pocopico.mpt3sas->on_boot Loading module mpt3sas -> Module mpt3sas is not loaded Ran "check-mpt3sas.sh" for pocopico.mpt3sas->on_boot - exit=0
  21. The weird thing is that adamadam has a 1000:0072. So i think he can be helped with ds3615xs and mpt2sas. I can be mistaken too.
×
×
  • Create New...