XerSonik Posted February 22, 2019 Share #1 Posted February 22, 2019 Release notes: https://www.synology.com/en-global/releaseNote/DS3615xs (2019-02-19)Important Note The update is expected to be available for all regions within the next few days, although the time of release in each region may vary slightly. This update will restart your Synology NAS if you are using the models listed below. Plus Series : DS218+, DS718+, DS918+, DS1019+ Value Series : DS418playFixed Issues Fixed an issue where abnormal reboot while converting SHR type or expanding SHR capacity may cause the storage volume not to be properly mounted. Fixed an issue where the completion of Snapshot Replication under high load environment may result in abnormal reboot. Minor bug fixes. Quote Link to comment Share on other sites More sharing options...
ustinych Posted February 22, 2019 Share #2 Posted February 22, 2019 - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.2.1-23824 Update 4 - Loader version and model: JUN'S LOADER v1.03b - DS3615xs - Using custom extra.lzma: NO - Installation type: BAREMETAL - HP MicroServer Gen8 - Additional comments: Extra Intel NIC Quote Link to comment Share on other sites More sharing options...
Bi0sh0ck Posted February 22, 2019 Share #3 Posted February 22, 2019 - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.2.1-23824 Update 4 - Loader version and model: JUN'S LOADER v1.03b - DS3615xs - Using custom extra.lzma: NO - Installation type: BAREMETAL - HP MicroServer Gen8 (Intel Xeon E3) - Additional comments: Onboard lan not tested, all ok with PCIE Intel NIC Quote Link to comment Share on other sites More sharing options...
wwweagle Posted February 25, 2019 Share #4 Posted February 25, 2019 - Outcome of the update: SUCCESSFUL - DSM version prior update: New install - Loader version and model: JUN'S LOADER v1.03b - DS3615xs (MBR version LINK thanks wimmetje) - Using custom extra.lzma: NO - Installation type: BAREMETAL - GA-6UASV3 (Intel Xeon E3-1220V2) - Additional comments: Extra Intel NIC (9420PT) Onboard lan ( BCM5719) not worked, but in ssh the Kernel driver, tg3, was loaded I have a problem. restart and shutdown don't work . go back to 3617 6.2 version Quote Link to comment Share on other sites More sharing options...
ivankong Posted February 26, 2019 Share #5 Posted February 26, 2019 - Outcome of the installation/update: SUCCESSFUL - DSM version prior update: DSM 6.2.1-23824 - Update 4 - Loader version and model: JUN'S LOADER v1.03b - DS3615xs - Using custom extra.lzma: NO - Installation type: BAREMETAL - HP Microserver Gen 8 with Intel NIC - Additional comments: no need restart Quote Link to comment Share on other sites More sharing options...
pastrychef Posted February 26, 2019 Share #6 Posted February 26, 2019 - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.2.1-23824 Update 4 - Loader version and model: JUN'S LOADER v1.03b - DS3615xs - Using custom extra.lzma: NO - Installation type: BAREMETAL - ASRock C2550D4I - Additional comments: Updated from DSM Control Panel. Intel X540-T2 continues to work fine. No restart needed but I did a restart anyway to make sure it's working. Quote Link to comment Share on other sites More sharing options...
sirendong Posted February 26, 2019 Share #7 Posted February 26, 2019 - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.2.1-23824 Update 4 - Loader version and model: Jun's Loader v1.03b - DS3615xs - Using custom extra.lzma: NO - Installation type: VM - ESXi 6.5 - Additional comments: Intel E1000e Quote Link to comment Share on other sites More sharing options...
hoidoi Posted February 26, 2019 Share #8 Posted February 26, 2019 - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.2.1-23824 update 4 - Loader version and model: JUN'S LOADER v1.04b - DS918+ - Using custom extra.lzma: NO - Installation type: BAREMETAL - Gigabyte H110M-S2H / Pentium G4400 - Additional comments: Updated from DSM Control Panel, no reboot necessary - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.2.1-23824 update 4 - Loader version and model: JUN'S LOADER v1.03b - DS3615xs - Using custom extra.lzma: NO - Installation type: BAREMETAL - HP MicroServer Gen10 with AMD Opteron X3216 - Additional comments: HP NC360T Dual NIC, no reboot necessary Quote Link to comment Share on other sites More sharing options...
gritor Posted February 26, 2019 Share #9 Posted February 26, 2019 - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.2.1-23824 update 4 - Loader version and model: JUN'S LOADER v1.03b - DS3615xs - Using custom extra.lzma: NO - Installation type: BAREMETAL - HP N54L - Additional comments: Updated from DSM Control Panel, no reboot necessary Quote Link to comment Share on other sites More sharing options...
loxar Posted February 26, 2019 Share #10 Posted February 26, 2019 -Outcome of the update: SUCCESSFULL -DMS version prior update: DSM 6.2.1-23824 update 4 -Loader version and model: Jun's loader V1.03b -DS3615xs - Using custom extra.lzma: NO - Installation type: BAREMETAL - N54L - Additional comments: HP NC360T Dual NIC, USB3: Fujitsu Renesas uPD720202 working, no reboot necessary Quote Link to comment Share on other sites More sharing options...
TeleDDim Posted February 26, 2019 Share #11 Posted February 26, 2019 - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.2.1-23824 Update 4 - Loader version and model: JUN'S LOADER v1.04b - DS918+ - Using custom extra.lzma: NO - Installation type: BAREMETAL - Asrock J4105-ITX - Additional comments: reboot needed Quote Link to comment Share on other sites More sharing options...
pmchan Posted February 26, 2019 Share #12 Posted February 26, 2019 - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.2.1-23824 Update 4 - Loader version and model: JUN'S LOADER v1.04b - DS918+ - Using custom extra.lzma: NO - Installation type: BAREMETAL - Asrock Q1900-ITX - Additional comments: reboot needed Quote Link to comment Share on other sites More sharing options...
nicoueron Posted February 26, 2019 Share #13 Posted February 26, 2019 - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.2.1-23824 Update 4 - Loader version and model: JUN'S LOADER v1.03b - DS3617XS - Using custom extra.lzma: NO - Installation type: ESXi 6.0.2 - Additional comments: no reboot needed Quote Link to comment Share on other sites More sharing options...
MaxPayne Posted February 26, 2019 Share #14 Posted February 26, 2019 - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.2.1-23824 Update 4 - Loader version and model: JUN'S LOADER v1.03b - DS3617XS - Using custom extra.lzma: NO - Installation type: BAREMETAL - ASRock N3150B-ITX - Additional comments: Updated from DSM Control Panel & Reboot needed Quote Link to comment Share on other sites More sharing options...
mtk8734 Posted February 26, 2019 Share #15 Posted February 26, 2019 (edited) - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.2.1-23824 Update 4 - Loader version and model: JUN'S LOADER v1.03b - DS3615XS - Using custom extra.lzma: NO - Installation type: VM - ESXi 6.7 - Additional comments: Updated from DSM Control Panel, no reboot needed. Edited February 26, 2019 by mtk8734 Quote Link to comment Share on other sites More sharing options...
Sonnyboy666 Posted February 26, 2019 Share #16 Posted February 26, 2019 - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.2.1-23824 update 4 - Loader version and model: JUN'S LOADER v1.04b - DS918+ - Using custom extra.lzma: NO - Installation type: BAREMETAL - DELL PowerEdge T30 / INTEL Xeon - Additional comments: Reboot required Quote Link to comment Share on other sites More sharing options...
misfit616 Posted February 26, 2019 Share #17 Posted February 26, 2019 - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.2.1-23824 update 4 - Loader version and model: JUN'S LOADER v1.04b - DS918+ - Using custom extra.lzma: NO - Installation type: BAREMETAL - ASUS B150M / i7 6500 - Additional comments: Reboot required Quote Link to comment Share on other sites More sharing options...
manfriday Posted February 26, 2019 Share #18 Posted February 26, 2019 Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.2.1-23824 Update 4 - Loader version and model: JUN'S LOADER v1.04b - DS918+ - Using custom extra.lzma: NO - Installation type: BAREMETAL - Asrock J3455 M - Additional comments: reboot required Quote Link to comment Share on other sites More sharing options...
romeo006 Posted February 26, 2019 Share #19 Posted February 26, 2019 - Outcome of the installation/update: SUCCESSFUL - DSM version prior update: DSM 6.2.1-23824 - Update 4 - Loader version and model: JUN'S LOADER v1.03b - DS3615xs - Using custom extra.lzma: NO - Installation type: BAREMETAL - Additional comments: no need restart Quote Link to comment Share on other sites More sharing options...
cferra Posted February 26, 2019 Share #20 Posted February 26, 2019 - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.2.1-23824 Update 4 - Loader version and model: JUN'S LOADER v1.03b - DS3615xs - Using custom extra.lzma: NO - Installation type: BAREMETAL - SuperMicro X9SCM-F - E3-1270v2 / Mellanox Connectx-3 - Additional comments: No Reboot Required Quote Link to comment Share on other sites More sharing options...
michel30 Posted February 26, 2019 Share #21 Posted February 26, 2019 Outcome of the update: SUCCESSFUL - DSM version before update: DSM 6.2.1-23824 Update 4 - Loader version and model: JUN'S LOADER v1.03b - DS3615xs - Using custom extra.lzma: No - Installation type: BAREMETAL - Dell Optiplex 980 - Additional comments: It just worked, No Reboot Required. Reboot test was also okay. Quote Link to comment Share on other sites More sharing options...
pigr8 Posted February 26, 2019 Share #22 Posted February 26, 2019 - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.2-23739 Update 4 - Loader version and model: Jun's Loader v1.03b - DS3615xs - Using custom extra.lzma: NO - Installation type: VM - ESXi 6.5U2 on Microserver Gen8 - Additional comments: Cougar Point 6 port SATA AHCI Controller in passthrough, NIC set to e1000e. No Reboot Required Quote Link to comment Share on other sites More sharing options...
A__C Posted February 27, 2019 Share #23 Posted February 27, 2019 - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.2.1-23824 Update 4 - Loader version and model: JUN'S LOADER v1.04b - DS918+ - Using custom extra.lzma: NO - Installation type: ASRock Z370M-ITXac (built-in WiFi card removed) - Additional comments: No reboot needed Quote Link to comment Share on other sites More sharing options...
marq Posted February 27, 2019 Share #24 Posted February 27, 2019 - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.2.1-23824 Update 4 - Loader version and model: JUN'S LOADER v1.04b - DS918+ - Using custom extra.lzma: NO - Installation type: Intel NUC NUC5i5RYK - Additional comments: reboot needed, updated Docker DSM as well (completed in under a minute) Quote Link to comment Share on other sites More sharing options...
bagheera Posted February 27, 2019 Share #25 Posted February 27, 2019 - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.2-23739 Update 4 - Loader version and model: Jun's Loader v1.03b - DS3615xs - Using custom extra.lzma: NO - Installation type: VM - ESXi 6.5 on Dell R710 - Additional comments: No Reboot Required Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.