Jump to content
XPEnology Community

gritor

Member
  • Posts

    12
  • Joined

  • Last visited

Everything posted by gritor

  1. Hello, Is there any solution, for the detection of faces and objects, for the latest version? I have a HP N54L baremetal processor AMD Turion (tm) II Neo N54L Dual-Core Processor, with version 1.1.2-0511 works all right, but there are features of the latest version, which I would like to use.
  2. - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.2.1-23824 update 4 - Loader version and model: JUN'S LOADER v1.03b - DS3615xs - Using custom extra.lzma: NO - Installation type: BAREMETAL - HP N54L - Additional comments: Updated from DSM Control Panel, no reboot necessary
  3. gritor

    DSM 6.1.x Loader

    As far as I am aware people who have updated to update 2 didn't have any problems, so the issue must be coming from your machine or from an update that went wrong. The reasons behind your issue could be multiple. I did experience something similar to you but only when I changed mtu to 9000. I couldn't access my machine through most services but strangly I could still access plex and a few othet stuff through very specific ports. Are your NICs bonded? If not do you have mtu set above 1500? If yes you might have to acces your installation through a live ununtu cd. If you search this thread you will find my posts about it. If it's none of the above then come back here. Thank you very much, I could finally reinstall the 6.0.2 DSM changing the grub.conf adding support for AMD reinstall the option, then can find my NAS in http://find.synology.com and doing a clean install but keeping data, and I have access to my data. The NIC MTU was in 2000, I changed it to 1500 and worked apparently after the change upgraded to version 2 and when I lost the services.
  4. gritor

    DSM 6.1.x Loader

    I updated my HP N54L 5.2 to 6.0.2 and worked very well, after that, I updated to update 2, and now doesn't work any service SSH,HTTP,etc I cant conect to web DSM 5000 port. I try to reinstall 6.0.2 but dont find the dsm in synology assistant. Any idea?
  5. Hay una guía de un forero de la sección inglesa que ha hecho una guía de como migrar de gnoboot a nanoboot y actualizar al DSM 5.0 4485. http://cyanlabs.co.uk/tutorials/synolog ... o-nanoboot Esta hecha la guía sobre ESXi pero debería de funcionar instalando directamente en la máquina sin virtualizar...
  6. Buenas, alguno ha actualizado ya a la versión 5.0-4482 con gnoboot 1.5 ? Un saludo.
  7. Ok yo lo hice desde la trantor 5.0 beta por que leí en algún post de gnoboot que actualizar de 4.3 a 5 se perdían los datos de la partición, pero si tu lo has hecho así, está bien saberlo para ahorrarnos un paso.
  8. Te cuento lo que a mi me ha funcionado: 1º - Creas en el programador de tareas un script definido por usuario con estos comandos: sed 's/flashupdateDeb/flashupdateDeb1/' /autoupd@te.info > /autoupd@te.info1 mv /autoupd@te.info1 /autoupd@te.info 2º - Te descargas la actualización desde actualizar y restaurar , pero no le des a instalar 3º - Ejecutas el script desde el programador de tareas 4º - Instalas el update 1 Eso es lo que yo hecho y sin problemas, espero que te funcione. Suerte!!
  9. Hola jurgenautt, tengo una buena noticia, acabo de actualizar de 4.3 update 4 a DSM 5.0 4458 Update 1 y no he perdido ni la configuración ni los datos, te cuento lo que he hecho: Básicamente lo que pone aquí: viewtopic.php?f=2&t=2242 que es actualizar a Trantor 5.0 4418 beta 01. Download DSM 5.0-4418 from http://xpenology.trantor.be/xpenology.c ... .0_BETA.7z 02. Extract the file 03. Burn img file with this program https://dl.dropbox.com/u/8476146/qnolog ... nary06.rar 04. Eject the USB 05. Shutdown Synology 06. Exchange USB Flash drive with new one ( 5.0-4418 ) 07. Power on Synology & DSM will boot normally 08. Launch Synology Assistant on your second PC 09. Click 'Search' 10. If you've done everything correctly you'll see a new 'DiskStation' has been found. 11. Disconnect the USB flash drive from the Synology for this next step 12. Right-click on new 'DiskStation' and choose 'Install' 13. Browse and select the new downloaded version (5.0-4418.pat) 14. Choose a Name for the DiskStation, a new default admin password and IP configuration 15. After installation is complete the DiskStation will reboot automatically. 16. Turn OFF Synology manually now 17. Isert the same USB Flash drive ( 5.0-4418) back into Synology 18. Power on Synology & DSM will boot normally 19. In Synology Assistant click 'Search' again 20. Depending on the name and network config you chose during installation you will see now a DiskStation has been found with the NAME you chose Después de actualizar a la 5.0 4418 beta de trantor hice esto: viewtopic.php?f=2&t=2545 que es casi lo mismo que antes pero cambiando el usb de arranque por el de gnoboot, ahí pone que utiliza la versión de gnoboot 1.3 alpha yo he utilizado la 1.4: How to install DSM 5.0 4458. If you have 5.0beta1 trantor then you can use gnoboot 10.3 alpha 1. write using win32imagedrive gnoboot 10.3 alpha to usb 2. boot from usb 3. select gnoboot-me 4. using synology asssistant install latest 4458 pat file 5. reboot with usb inserted , (don't select gnoboot-me, let grub to select automatically ) 6. drivers will be upgraded and inserted in original 4458 installed version. NOTE: - no data will be deleted or altered on installation - need to reconfigure again users and permission if you lost them. - try a scrub to be sure that all data are ok. Espero que se entienda
  10. Hola a todos!!! antes de nada quiero agradecer a el foro por haber creado la sección para nuestra lengua, y también quiero agradecer el gran trabajo que ha hecho Trantor y gnoboot. Tengo un HP N54L con la versión de trantor XPEnology DS3612xs DSM 4.3 build 3810++ (repack v1.0) instalada y actualizado el DSM hasta el 4.3 update 4, me gustaría actualizar a DSM 5, pero me da miedo perder los 4,5 TB de datos que tengo, tampoco dispongo de discos para poder hacer un backup en caso de perdida de datos en el proceso de actualizar de dsm 4.3 a 5. He investigado en la sección inglesa y he visto que hay gente que lo ha hecho, pero no me queda muy claro como. Mi pregunta es si algún alma caritativa que haya hecho esta actualización y no haya perdido los datos en el proceso, pierda unos minutos de su tiempo para explicar como lo ha hecho....
  11. Could you add Spanish section in the forum?
  12. Hi, this is my output: NAS> df -h Filesystem Size Used Available Use% Mounted on /dev/md0 2.3G 492.4M 1.8G 21% / /dev/md0 2.3G 492.4M 1.8G 21% /proc/bus/pci /tmp 7.8G 1.0M 7.8G 0% /tmp /dev/vg1000/lv 4.5T 1.5T 3.0T 33% /volume1 NAS>
×
×
  • Create New...