wwweagle

Transition Members
  • Content Count

    7
  • Joined

  • Last visited

Community Reputation

0 Neutral

About wwweagle

  • Rank
    Newbie

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

  1. 1. i think you don't need to change the setting. Now i use the MB ASRock Rack E3C236D4U. it also built a SATA DOM and i don't change any setting in the Grub.cfg. i use a lsi 9217 to connect SAS disk and my disk slots have 16(8-->MB+8-->LSI HBA) (i have change the value in the etc/synoinfo.conf and /etc.default/synoinfo.conf ).
  2. Outcome of the update: SUCCESSFULL - DSM version prior update: DSM 6.2 - Loader version and model: JUN'S LOADER v1.03b - DS3617xs - Using custom extra.lzma: YES, DSM 6.2.2 v0.5_test - Installation type: BAREMETAL - MB ASRock Rack E3C236D4U ; onboard NIC Enabled, additional NIC Intel PRO/1000 PT Dual Port Server Adapter those nic can be used in DSM 6.2.2-24922, the device id are 1533 and 105e; the driver are igb and e1000e, respectively. - Additional comments: Reboot required
  3. Outcome of the update: SUCCESSFULL - DSM version prior update: DSM 6.2.2-24922 - Loader version and model: JUN'S LOADER v1.03b - DS3615xs - Using custom extra.lzma: NO - Installation type: BAREMETAL - MB ASRock Rack E3C236D4U ; onboard NIC Enabled, additional NIC Intel PRO/1000 PT Dual Port Server Adapter those nic can be used in DSM 6.2.2-24922, the device id are 1533 and 105e; the driver are igb and e1000e, respectively. - Additional comments: Reboot required
  4. E3 1220V2 DS3617 Jun's Mod V1.03b DSM 6.2 CPU # dd if=/dev/zero bs=1M count=1024 | md5sum 1024+0 records in 1024+0 records out 1073741824 bytes (1.1 GB) copied, 1.80579 s, 595 MB/s cd573cfaace07e7949bc0c46028904ff ~# time $(i=0; while (( i < 9999999 )); do (( i ++ )); done) real 0m39.807s user 0m39.681s sys 0m0.023s HDD 6TBX5 Raid5 # dd bs=1M count=256 if=/dev/zero of=/volume1/share/testx conv=fdatasync 256+0 records in 256+0 records out 268435456 bytes (268 MB) copied, 0.725 s, 370 MB/s # dd bs=1M count=1024 if=/dev/zero of=/volume1/share/testx conv=fdatasync 1024+0 records in 1024+0 records out 1073741824 bytes (1.1 GB) copied, 2.27316 s, 472 MB/s # dd bs=1M count=2048 if=/dev/zero of=/volume1/share/testx conv=fdatasync 2048+0 records in 2048+0 records out 2147483648 bytes (2.1 GB) copied, 4.19457 s, 512 MB/s
  5. - Outcome of the update: SUCCESSFUL - DSM version prior update: New install - Loader version and model: JUN'S LOADER v1.03b - DS3615xs (MBR version LINK thanks wimmetje) - Using custom extra.lzma: NO - Installation type: BAREMETAL - GA-6UASV3 (Intel Xeon E3-1220V2) - Additional comments: Extra Intel NIC (9420PT) Onboard lan ( BCM5719) not worked, but in ssh the Kernel driver, tg3, was loaded I have a problem. restart and shutdown don't work . go back to 3617 6.2 version
  6. i use intel NIC (9420PT) and it worked in 3615XS 6.2.1 i have a problem. restart and shutdown don't work have anyone a good idea?
  7. wwweagle

    DSM 6.2 Loader

    hello, test it in my pc, it don't work. U: E3 1220V2 MB:GA-6uasv1 rev2.0 the MB bios setting boot page don't show legacy boot opinion so i boot with UEFI mode. my pc seems to boot ok but Synology assistant can't find the new NAS on network PS. the network chip is Broadcom BCM5718