pipsen Posted April 26, 2023 Share #26 Posted April 26, 2023 On 4/17/2023 at 5:56 PM, wjz304 said: I have updated again https://github.com/wjz304/arpl-i18n Already tested with 7.2 RC -> works like charm! Thank you @wjz304 1 1 Quote Link to comment Share on other sites More sharing options...
pipsen Posted April 26, 2023 Share #27 Posted April 26, 2023 Question: Whenever I use the shutdown function in DSM (baremetal), it immediately starts a reboot after shutdown, the device does not stay off. Do you have the same behaviour or any idea whiy? Thank you! Quote Link to comment Share on other sites More sharing options...
smilenkovski Posted April 26, 2023 Author Share #28 Posted April 26, 2023 2 hours ago, pipsen said: Question: Whenever I use the shutdown function in DSM (baremetal), it immediately starts a reboot after shutdown, the device does not stay off. Do you have the same behaviour or any idea whiy? Thank you! Mine is shutting down properly. Asrock J5040. Some motherboards refuse to shutdown. There were a shutdown package long time ago on this forum. I don't beleive that will worknow. But search and try. Quote Link to comment Share on other sites More sharing options...
dj_nsk Posted April 27, 2023 Share #29 Posted April 27, 2023 7 часов назад, pipsen сказал: it immediately starts a reboot after shutdown, the device does not stay off check BIOS - ACPI settings, Restore on power loss or the same Quote Link to comment Share on other sites More sharing options...
Ostap60 Posted April 29, 2023 Share #30 Posted April 29, 2023 Good hour! Installed DS918+. Works great, but the question remains: USB bootloader - visible from the system. (vid/pid - correct) How to hide the bootable usb drive in the system? Quote Link to comment Share on other sites More sharing options...
Peter Suh Posted April 29, 2023 Share #31 Posted April 29, 2023 (edited) On 4/25/2023 at 8:32 PM, wjz304 said: No official information was found. If you have any, plz provide it @wjz304 Hello. I tried using apollolake-4.4.302.tgz file in my M SHELL for TCRP in the modules.zip you compiled. M SHELL for TCRP DSM 7.1 used arpl-modules directly. Currently, I am also using arpl-modules that I compiled myself after forking. However, apollolake-4.4.302.tgz made with the 7.2 compiler prepared by fabio had an unknown symbol and invalid module format issue. https://github.com/pocopico/redpill-modules/issues/1 That issue I confirmed with pocopico a few weeks ago. I tried using your apollolake-4.4.302.tgz on TCRP DSM 7.2 RC and DS1019+ and the junior log gave the same " invalid module format, unknown symbol". In your arpl all modules work without this "unknown symbol" message? Spoiler Running "check-all-modules.sh" for modprobe->on_boot apollolake 4.4.302 modules.alias.4.json Copying kmod to /bin/ 'kmod' -> '/bin/kmod' Copying sed,jq,lspci files to /sbin/ 'sed' -> '/usr/sbin/sed' 'jq' -> '/usr/sbin/jq' 'lspci' -> '/usr/sbin/lspci' Copying lspci libraries to /lib/ 'libz.so.1' -> '/lib/libz.so.1' 'libudev.so.1' -> '/lib/libudev.so.1' 'libattr.so.1' -> '/lib/libattr.so.1' 'libcap.so.2' -> '/lib/libcap.so.2' link modprobe to kmod modprobe: FATAL: Module ata_piix not found. insmod: can't insert '/lib/modules/ata_piix.ko': No such file or directory Found IDE Controller : pciid 8086d00007111 Required Extension : Searching for matching extension for ata_piix Found VGA Controller : pciid 15add00000405 Required Extension : No matching extension [ 13.895774] mptbase: Unknown rela relocation: 4 modprobe: ERROR: could not insert 'mptspi': Exec format error [ 15.448962] mptspi: Unknown symbol mpt_deregister (err 0) [ 15.449774] mptspi: Unknown symbol mpt_reset_deregister (err 0) [ 15.450560] mptspi: Unknown symbol mptscsih_host_attrs (err 0) [ 15.451333] mptspi: Unknown symbol mptscsih_qcmd (err 0) [ 15.451925] mptspi: Unknown symbol mptscsih_bios_param (err 0) [ 15.452610] mptspi: Unknown symbol mptscsih_io_done (err 0) [ 15.453261] mptspi: Unknown symbol mptscsih_slave_configure (err 0) [ 15.487313] mptspi: Unknown symbol mpt_config (err 0) [ 15.487914] mptspi: Unknown symbol mptscsih_taskmgmt_complete (err 0) [ 15.488704] mptspi: Unknown symbol mptscsih_ioc_reset (err 0) [ 15.489404] mptspi: Unknown symbol mpt_free_msg_frame (err 0) [ 15.490051] mptspi: Unknown symbol mptscsih_remove (err 0) [ 15.490700] mptspi: Unknown symbol mptscsih_bus_reset (err 0) [ 15.491378] mptspi: Unknown symbol mptscsih_is_phys_disk (err 0) [ 15.492047] mptspi: Unknown symbol spi_display_xfer_agreement (err 0) [ 15.492827] mptspi: Unknown symbol mptscsih_host_reset (err 0) [ 15.493544] mptspi: Unknown symbol spi_release_transport (err 0) [ 15.494226] mptspi: Unknown symbol mpt_put_msg_frame (err 0) [ 15.495288] mptspi: Unknown symbol mpt_register (err 0) [ 15.496257] mptspi: Unknown symbol mpt_event_deregister (err 0) [ 15.497363] mptspi: Unknown symbol mpt_findImVolumes (err 0) [ 15.498251] mptspi: Unknown symbol mptscsih_scandv_complete (err 0) [ 15.499288] mptspi: Unknown symbol mptscsih_resume (err 0) [ 15.499956] mptspi: Unknown symbol mptscsih_raid_id_to_num (err 0) [ 15.500689] mptspi: Unknown symbol mpt_event_register (err 0) [ 15.501383] mptspi: Unknown symbol mptscsih_event_process (err 0) [ 15.502079] mptspi: Unknown symbol mptscsih_suspend (err 0) [ 15.502816] mptspi: Unknown symbol mptscsih_slave_destroy (err 0) [ 15.503615] mptspi: Unknown symbol mptscsih_change_queue_depth (err 0) [ 15.537917] mptspi: Unknown symbol spi_attach_transport (err 0) [ 15.538726] mptspi: Unknown symbol mptscsih_shutdown (err 0) [ 15.539542] mptspi: Unknown symbol mpt_get_msg_frame (err 0) [ 15.540238] mptspi: Unknown symbol mptscsih_dev_reset (err 0) [ 15.541000] mptspi: Unknown symbol mpt_attach (err 0) [ 15.541615] mptspi: Unknown symbol mpt_reset_register (err 0) [ 15.542364] mptspi: Unknown symbol mptscsih_info (err 0) [ 15.542986] mptspi: Unknown symbol mptscsih_abort (err 0) [ 15.543692] mptspi: Unknown symbol mpt_HardResetHandler (err 0) [ 15.544458] mptspi: Unknown symbol spi_dv_device (err 0) [ 15.545064] mptspi: Unknown symbol mptscsih_show_info (err 0) [ 15.545792] mptspi: Unknown symbol mptscsih_IssueTaskMgmt (err 0) [ 15.550556] mptspi: Unknown symbol mpt_deregister (err 0) [ 15.551421] mptspi: Unknown symbol mpt_reset_deregister (err 0) [ 15.552601] mptspi: Unknown symbol mptscsih_host_attrs (err 0) [ 15.553733] mptspi: Unknown symbol mptscsih_qcmd (err 0) [ 15.588144] mptspi: Unknown symbol mptscsih_bios_param (err 0) [ 15.588866] mptspi: Unknown symbol mptscsih_io_done (err 0) [ 15.589557] mptspi: Unknown symbol mptscsih_slave_configure (err 0) [ 15.590297] mptspi: Unknown symbol mpt_config (err 0) [ 15.590870] mptspi: Unknown symbol mptscsih_taskmgmt_complete (err 0) [ 15.591625] mptspi: Unknown symbol mptscsih_ioc_reset (err 0) [ 15.592267] mptspi: Unknown symbol mpt_free_msg_frame (err 0) [ 15.592951] mptspi: Unknown symbol mptscsih_remove (err 0) [ 15.593598] mptspi: Unknown symbol mptscsih_bus_reset (err 0) [ 15.594242] mptspi: Unknown symbol mptscsih_is_phys_disk (err 0) [ 15.594960] mptspi: Unknown symbol spi_display_xfer_agreement (err 0) [ 15.595723] mptspi: Unknown symbol mptscsih_host_reset (err 0) [ 15.596420] mptspi: Unknown symbol spi_release_transport (err 0) [ 15.597089] mptspi: Unknown symbol mpt_put_msg_frame (err 0) [ 15.597756] mptspi: Unknown symbol mpt_register (err 0) [ 15.598374] mptspi: Unknown symbol mpt_event_deregister (err 0) [ 15.599036] mptspi: Unknown symbol mpt_findImVolumes (err 0) [ 15.599717] mptspi: Unknown symbol mptscsih_scandv_complete (err 0) [ 15.600474] mptspi: Unknown symbol mptscsih_resume (err 0) [ 15.601099] mptspi: Unknown symbol mptscsih_raid_id_to_num (err 0) [ 15.601829] mptspi: Unknown symbol mpt_event_register (err 0) [ 15.602521] mptspi: Unknown symbol mptscsih_event_process (err 0) [ 15.603216] mptspi: Unknown symbol mptscsih_suspend (err 0) [ 15.603897] mptspi: Unknown symbol mptscsih_slave_destroy (err 0) [ 15.637990] mptspi: Unknown symbol mptscsih_change_queue_depth (err 0) [ 15.638771] mptspi: Unknown symbol spi_attach_transport (err 0) [ 15.639518] mptspi: Unknown symbol mptscsih_shutdown (err 0) [ 15.640560] mptspi: Unknown symbol mpt_get_msg_frame (err 0) [ 15.641507] mptspi: Unknown symbol mptscsih_dev_reset (err 0) [ 15.642166] mptspi: Unknown symbol mpt_attach (err 0) [ 15.642830] mptspi: Unknown symbol mpt_reset_register (err 0) [ 15.643559] mptspi: Unknown symbol mptscsih_info (err 0) [ 15.644210] mptspi: Unknown symbol mptscsih_abort (err 0) [ 15.644899] mptspi: Unknown symbol mpt_HardResetHandler (err 0) [ 15.645722] mptspi: Unknown symbol spi_dv_device (err 0) [ 15.646398] mptspi: Unknown symbol mptscsih_show_info (err 0) [ 15.647066] mptspi: Unknown symbol mptscsih_IssueTaskMgmt (err 0) insmod: can't insert '/lib/modules/mptspi.ko': unknown symbol in module, or unknown parameter Found SCSI Controller : pciid 1000d00000030 Required Extension : Searching for matching extension for mptspi [ 16.111373] e1000: Unknown rela relocation: 4 modprobe: ERROR: could not insert 'e1000': Exec format error [ 17.125911] e1000: Unknown rela relocation: 4 [ 17.130463] e1000: Unknown rela relocation: 4 insmod: can't insert '/lib/modules/e1000.ko': invalid module format Found Ethernet Interface : pciid 8086d0000100f Required Extension : Searching for matching extension for e1000 Found SATA Controller : pciid 15add000007e0 Required Extension : No matching extension insmod: can't insert '/lib/modules/ahci.ko': No such file or directory Found SATA Controller : pciid 8086d00005ae3 Required Extension : Searching for matching extension for ahci Found SATA Controller : pciid 1b4bd00009215 Required Extension : No matching extension [ 18.306501] igb: Unknown rela relocation: 4 modprobe: ERROR: could not insert 'igb': Exec format error [ 19.319058] igb: Unknown rela relocation: 4 [ 19.323848] igb: Unknown rela relocation: 4 insmod: can't insert '/lib/modules/igb.ko': invalid module format Found Ethernet Interface : pciid 8086d00001539 Required Extension : Searching for matching extension for igb [ 19.361312] igb: Unknown rela relocation: 4 modprobe: ERROR: could not insert 'igb': Exec format error [ 20.372592] igb: Unknown rela relocation: 4 [ 20.377305] igb: Unknown rela relocation: 4 insmod: can't insert '/lib/modules/igb.ko': invalid module format Found Ethernet Interface : pciid 8086d00001539 Required Extension : Searching for matching extension for igb Ran "check-all-modules.sh" for modprobe->on_boot - exit=0 Running "install-nvme-cache.sh" for nvme-cache->on_boot System is booting nvme-cache - early Ran "install-nvme-cache.sh" for nvme-cache->on_boot - exit=0 Running "boot-wait.sh" for thethorgroup.boot-wait->on_boot Ran "boot-wait.sh" for thethorgroup.boot-wait->on_boot - exit=0 :: Executing "on_boot" custom scripts ... [ OK ] Extensions processed [ 20.415975] etxhci_hcd: Unknown symbol usb_hcd_resume_root_hub (err 0) [ 20.417371] etxhci_hcd: Unknown symbol usb_hcd_pci_probe (err 0) [ 20.418343] etxhci_hcd: Unknown symbol usb_hcd_unlink_urb_from_ep (err 0) [ 20.419312] etxhci_hcd: Unknown symbol usb_hc_died (err 0) [ 20.420101] etxhci_hcd: Unknown symbol usb_wakeup_notification (err 0) [ 20.421048] etxhci_hcd: Unknown symbol usb_hcd_irq (err 0) [ 20.421815] etxhci_hcd: Unknown symbol usb_hcd_check_unlink_urb (err 0) [ 20.422776] etxhci_hcd: Unknown symbol usb_hcd_pci_pm_ops (err 0) [ 20.423651] etxhci_hcd: Unknown symbol usb_control_msg (err 0) [ 20.424501] etxhci_hcd: Unknown symbol usb_hcd_pci_shutdown (err 0) [ 20.425403] etxhci_hcd: Unknown symbol usb_hcd_link_urb_to_ep (err 0) [ 20.426327] etxhci_hcd: Unknown symbol usb_hcd_is_primary_hcd (err 0) [ 20.427268] etxhci_hcd: Unknown symbol usb_acpi_power_manageable (err 0) [ 20.428228] etxhci_hcd: Unknown symbol usb_put_hcd (err 0) [ 20.429008] etxhci_hcd: Unknown symbol usb_hcd_giveback_urb (err 0) [ 20.429915] etxhci_hcd: Unknown symbol usb_hcd_poll_rh_status (err 0) [ 20.430847] etxhci_hcd: Unknown symbol usb_acpi_set_power_state (err 0) [ 20.431793] etxhci_hcd: Unknown symbol usb_hcd_pci_remove (err 0) [ 20.432674] etxhci_hcd: Unknown symbol usb_remove_hcd (err 0) [ 20.433508] etxhci_hcd: Unknown symbol usb_add_hcd (err 0) [ 20.434354] etxhci_hcd: Unknown symbol usb_create_shared_hcd (err 0) [ 20.435303] etxhci_hcd: Unknown symbol usb_root_hub_lost_power (err 0) [ 20.441768] etxhci_hcd: Unknown symbol usb_hcd_resume_root_hub (err 0) [ 20.442775] etxhci_hcd: Unknown symbol usb_hcd_pci_probe (err 0) [ 20.443668] etxhci_hcd: Unknown symbol usb_hcd_unlink_urb_from_ep (err 0) [ 20.444676] etxhci_hcd: Unknown symbol usb_hc_died (err 0) [ 20.445530] etxhci_hcd: Unknown symbol usb_wakeup_notification (err 0) [ 20.447350] etxhci_hcd: Unknown symbol usb_hcd_irq (err 0) [ 20.448471] etxhci_hcd: Unknown symbol usb_hcd_check_unlink_urb (err 0) [ 20.449694] etxhci_hcd: Unknown symbol usb_hcd_pci_pm_ops (err 0) [ 20.450917] etxhci_hcd: Unknown symbol usb_control_msg (err 0) [ 20.452019] etxhci_hcd: Unknown symbol usb_hcd_pci_shutdown (err 0) [ 20.453166] etxhci_hcd: Unknown symbol usb_hcd_link_urb_to_ep (err 0) [ 20.454354] etxhci_hcd: Unknown symbol usb_hcd_is_primary_hcd (err 0) [ 20.455724] etxhci_hcd: Unknown symbol usb_acpi_power_manageable (err 0) [ 20.457124] etxhci_hcd: Unknown symbol usb_put_hcd (err 0) [ 20.457942] etxhci_hcd: Unknown symbol usb_hcd_giveback_urb (err 0) [ 20.458862] etxhci_hcd: Unknown symbol usb_hcd_poll_rh_status (err 0) [ 20.459793] etxhci_hcd: Unknown symbol usb_acpi_set_power_state (err 0) [ 20.460756] etxhci_hcd: Unknown symbol usb_hcd_pci_remove (err 0) [ 20.461651] etxhci_hcd: Unknown symbol usb_remove_hcd (err 0) [ 20.462515] etxhci_hcd: Unknown symbol usb_add_hcd (err 0) [ 20.463352] etxhci_hcd: Unknown symbol usb_create_shared_hcd (err 0) [ 20.464333] etxhci_hcd: Unknown symbol usb_root_hub_lost_power (err 0) insmod: can't insert '/lib/modules/etxhci-hcd.ko': unknown symbol in module, or unknown parameter [ 20.471747] apollolake_synobios: module license 'Synology Inc.' taints kernel. [ 20.473970] Disabling lock debugging due to kernel taint [ 20.475176] apollolake_synobios: Unknown rela relocation: 4 [ 20.482363] BUG: unable to handle kernel paging request at ffffffffa0356fb8 [ 20.483961] IP: [] shim_bios_module+0x2f/0x5c0 [redpill] [ 20.485023] PGD 99e0d067 PUD 99e0e063 PMD 8c42a067 PTE 0 [ 20.485829] Oops: 0000 [#1] SMP [ 20.486322] Modules linked in: apollolake_synobios(PO+) [ 20.487091] CPU: 3 PID: 6547 Comm: insmod Tainted: P OE 4.4.302+ #64216 [ 20.488173] Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 11/12/2020 [ 20.489682] task: ffff88008dbf1a00 ti: ffff88008f9e4000 task.ti: ffff88008f9e4000 [ 20.490752] RIP: 0010:[] [] shim_bios_module+0x2f/0x5c0 [redpill] [ 20.492083] RSP: 0018:ffff88008f9e7d08 EFLAGS: 00010246 [ 20.492834] RAX: ffffffffa0356f80 RBX: ffffffffa0373140 RCX: ffffffffa0357cc0 [ 20.493849] RDX: 0000000000000000 RSI: ffffffffa0373140 RDI: ffffffffa0009760 [ 20.494873] RBP: ffff88008f9e7d10 R08: ffffffff810bd450 R09: 0000000000000000 [ 20.495912] R10: ffff880094132d10 R11: fefefefefefefeff R12: 0000000000000001 [ 20.497000] R13: ffffffffa0373140 R14: 00000000fffffffb R15: ffffffff81847820 [ 20.498098] FS: 00007fe15611b740(0000) GS:ffff88009acc0000(0000) knlGS:0000000000000000 [ 20.499282] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 20.500121] CR2: ffffffffa0356fb8 CR3: 00000000921e9000 CR4: 00000000003606f0 [ 20.501245] Stack: [ 20.501557] 0000000000000000 ffff88008f9e7d30 ffffffffa0007efc 0000000000000000 [ 20.502696] 0000000000000001 ffff88008f9e7d70 ffffffff8106e02a ffffffff81844d20 [ 20.503832] ffffffffa0373158 ffffffffa0373140 0000000000000000 0000000000000000 [ 20.505005] Call Trace: [ 20.505445] [] bios_module_notifier_handler+0x6c/0x110 [redpill] [ 20.506773] [] blocking_notifier_call_chain+0x7a/0x90 [ 20.507983] [] load_module+0x1a03/0x2300 [ 20.508970] [] ? __vmalloc+0x8d/0xc0 [ 20.509885] [] SYSC_init_module+0x11b/0x150 [ 20.510815] [] SyS_init_module+0x9/0x10 [ 20.511602] [] entry_SYSCALL_64_fastpath+0x1e/0x93 [ 20.512517] Code: 84 ac 05 00 00 48 85 c9 0f 84 a3 05 00 00 55 48 8d 02 48 89 e5 48 8d 64 24 f8 48 89 15 23 71 00 00 48 8b 15 5c 71 00 00 48 85 d2 <48> 8b 48 38 0f 85 f8 02 00 00 48 89 0d e8 72 00 00 48 c7 05 3d [ 20.515982] RIP [] shim_bios_module+0x2f/0x5c0 [redpill] [ 20.516978] RSP [ 20.517479] CR2: ffffffffa0356fb8 [ 20.517951] ---[ end trace f1451dc7ef8ee76a ]--- Killed Starting /usr/syno/bin/synocfgen... /usr/syno/bin/synocfgen returns 255 [ 20.525837] Module [apollolake_synobios] is removed. rmmod: can't unload module 'apollolake_synobios': Device or resource busy Insert synorbd kernel module Insert synofsbd kernel module Insert sha256 kernel module Assemble args: -u 3200aa10:2f92ab20:3017a5a8:c86610be /dev/sda1 /dev/sdb1 [ 20.591639] md: md0 stopped. [ 20.592819] md: bind [ 20.593501] md: bind [ 20.596063] md/raid1:md0: active with 2 out of 16 mirrors [ 20.598453] md0: detected capacity change from 0 to 8589869056 mdadm: /dev/md0 has been started with 2 drives (out of 16). Partition Version=9 [ 20.653756] EXT4-fs (md0): couldn't mount as ext3 due to feature incompatibilities [ 20.665755] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null) /sbin/e2fsck exists, checking /dev/md0... e2fsck 1.44.1 (24-Mar-2018) /sbin/e2fsck -yvf returns 0 Mounting /dev/md0 /tmpRoot [ 20.897580] EXT4-fs (md0): couldn't mount as ext3 due to feature incompatibilities [ 20.907550] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null) ------------upgrade Begin upgrade procedure [ 21.012900] loop: module loaded [ 21.039525] EXT4-fs (loop0): couldn't mount as ext3 due to feature incompatibilities [ 21.062047] EXT4-fs (loop0): mounted filesystem with ordered data mode. Opts: (null) Failed to found any patch No upgrade file found End upgrade procedure ============upgrade ------------bootup-smallupdate Failed to AssertFileKeyValueEqual value1: /etc.defaults/synoinfo.conf:unique -> synology_apollolake_918+ value2: /tmpRoot/etc.defaults/synoinfo.conf:unique => synology_broadwellnk_3622xs+ Skip bootup smallupdate, because root is not matched to junior ============bootup-smallupdate Failed to AssertFileKeyValueEqual value1: /etc.defaults/synoinfo.conf:unique -> synology_apollolake_918+ value2: /tmpRoot/etc.defaults/synoinfo.conf:unique => synology_broadwellnk_3622xs+ Exit on error [7] root not matched with junior... Mon Mar 20 01:19:31 UTC 2023 /dev/md0 /tmpRoot ext4 rw,relatime,data=ordered 0 0 none /sys/kernel/debug debugfs rw,relatime 0 0 [ 22.045463] VFS: opened file in mnt_point: (/dev), file: (/urandom), comm: (ttyd) [ 22.046733] VFS: opened file in mnt_point: (/dev), file: (/null), comm: (sh) [ 22.047844] VFS: opened file in mnt_point: (/dev), file: (/null), comm: (sh) umount: can't unmount /dev: Device or resource busy umount: /etc/mtab: No such file [ 22.062316] VFS: opened file in mnt_point: (/dev), file: (/urandom), comm: (ttyd) or directory [ 22.063506] VFS: opened file in mnt_point: (/dev), file: (/null), comm: (sh) [ 22.064650] VFS: opened file in mnt_point: (/dev), file: (/null), comm: (sh) linuxrc.syno failed on 7 starting pid 7217, tty '': '/etc/rc' :: Starting /etc/rc :: Mounting procfs ... [ OK ] :: Mounting tmpfs ... [ OK ] :: Mounting devtmpfs ... [FAILED] :: Mounting devpts ... [ OK ] :: Mounting sysfs ... [ OK ] [ 22.138584] md: md1 stopped. [ 22.139883] md: bind [ 22.140490] md: bind [ 22.142615] md/raid1:md1: active with 2 out of 16 mirrors [ 22.143752] md1: detected capacity change from 0 to 2147418112 [ 22.155874] Adding 2097084k swap on /dev/md1. Priority:-1 extents:1 across:2097084k :: Loading module usb-common ... [ OK ] :: Loading module usbcore[ 22.254193] ACPI: bus type USB registered [ 22.254802] usbcore: registered new interface driver usbfs [ 22.255645] usbcore: registered new interface driver hub [ 22.256509] usbcore: registered new interface driver ethub [ 22.257480] usbcore: registered new device driver usb ... [ OK ] :: Loading module mdio ... [ OK ] :: Loading module fat ... [ OK ] :: Loading module vfat ... [ OK ] :: Loading module udp_tunnel ... [ OK ] :: Loading module ip6_udp_tunnel ... [ OK ] :: Loading module vxlan ... [ OK ] :: Loading module e1000e[ 22.378987] e1000e: Intel(R) PRO/1000 Network Driver - 3.8.4-NAPI [ 22.379983] e1000e: Copyright(c) 1999 - 2020 Intel Corporation. ... [ OK ] :: Loading module i2c-algo-bit ... [ OK ] :: Loading module igb[ 22.395088] Intel(R) Gigabit Ethernet Linux Driver - version 5.7.2 [ 22.396063] Copyright(c) 2007 - 2021 Intel Corporation. [ 22.396866] igb: probe of 0001:02:00.0 failed with error -5 [ 22.397683] igb: probe of 0001:03:00.0 failed with error -5 ... [ OK ] :: Loading module be2net ... [ OK ] :: Loading module ixgbe[ 22.423909] Intel(R) 10GbE PCI Express Linux Network Driver - version 5.13.4 [ 22.424878] Copyright(c) 1999 - 2021 Intel Corporation. ... [ OK ] :: Loading module r8168 ... [ OK ] :: Loading module r8125 ... [ OK ] :: Loading module i40e[ 22.452987] i40e: Unknown symbol i40e_ndo_set_vf_port_vlan (err 0) [ 22.454112] i40e: Unknown symbol i40e_ptp_set_increment (err 0) [ 22.455053] i40e: Unknown symbol i40e_ptp_rx_hang (err 0) [ 22.455814] i40e: Unknown symbol i40e_ptp_set_ts_config (err 0) [ 22.456572] i40e: Unknown symbol i40e_free_vfs (err 0) [ 22.457216] i40e: Unknown symbol i40e_ptp_stop (err 0) [ 22.457843] i40e: Unknown symbol i40e_ndo_set_vf_mac (err 0) [ 22.458538] i40e: Unknown symbol i40e_ndo_set_vf_spoofchk (err 0) [ 22.459292] i40e: Unknown symbol i40e_reset_all_vfs (err 0) [ 22.459947] i40e: Unknown symbol i40e_vc_process_vf_msg (err 0) [ 22.460708] i40e: Unknown symbol i40e_ptp_get_pins (err 0) [ 22.461394] i40e: Unknown symbol i40e_ptp_tx_hang (err 0) [ 22.462024] i40e: Unknown symbol i40e_alloc_vfs (err 0) [ 22.462700] i40e: Unknown symbol i40e_pci_sriov_configure (err 0) [ 22.463555] i40e: Unknown symbol i40e_ptp_alloc_pins (err 0) [ 22.464414] i40e: Unknown symbol i40e_ptp_init (err 0) [ 22.465087] i40e: Unknown symbol i40e_ndo_get_vf_config (err 0) [ 22.465995] i40e: Unknown symbol i40e_vc_notify_reset (err 0) [ 22.466887] i40e: Unknown symbol i40e_get_vf_stats (err 0) [ 22.467711] i40e: Unknown symbol i40e_restore_all_vfs_msi_state (err 0) [ 22.468730] i40e: Unknown symbol i40e_ptp_rx_hwtstamp (err 0) [ 22.469419] i40e: Unknown symbol i40e_ptp_tx_hwtstamp (err 0) [ 22.470077] i40e: Unknown symbol i40e_vc_notify_vf_reset (err 0) [ 22.470813] i40e: Unknown symbol i40e_reset_vf (err 0) [ 22.471425] i40e: Unknown symbol i40e_ptp_get_ts_config (err 0) [ 22.472102] i40e: Unknown symbol i40e_restore_ingress_egress_mirror (err 0) [ 22.472935] i40e: Unknown symbol i40e_ptp_save_hw_time (err 0) [ 22.473629] i40e: Unknown symbol i40e_ndo_set_vf_bw (err 0) [ 22.474299] i40e: Unknown symbol i40e_vc_process_vflr_event (err 0) [ 22.475022] i40e: Unknown symbol i40e_ndo_set_vf_link_state (err 0) [ 22.475762] i40e: Unknown symbol i40e_ndo_set_vf_trust (err 0) [ 22.476447] i40e: Unknown symbol i40e_vc_notify_link_state (err 0) [ 22.477169] i40e: Unknown symbol i40e_ptp_set_pins_ioctl (err 0) [ 22.481698] i40e: Unknown symbol i40e_ndo_set_vf_port_vlan (err 0) [ 22.482455] i40e: Unknown symbol i40e_ptp_set_increment (err 0) [ 22.483157] i40e: Unknown symbol i40e_ptp_rx_hang (err 0) [ 22.483782] i40e: Unknown symbol i40e_ptp_set_ts_config (err 0) [ 22.484511] i40e: Unknown symbol i40e_free_vfs (err 0) [ 22.485116] i40e: Unknown symbol i40e_ptp_stop (err 0) [ 22.485751] i40e: Unknown symbol i40e_ndo_set_vf_mac (err 0) [ 22.486827] i40e: Unknown symbol i40e_ndo_set_vf_spoofchk (err 0) [ 22.488487] i40e: Unknown symbol i40e_reset_all_vfs (err 0) [ 22.489563] i40e: Unknown symbol i40e_vc_process_vf_msg (err 0) [ 22.490711] i40e: Unknown symbol i40e_ptp_get_pins (err 0) [ 22.491631] i40e: Unknown symbol i40e_ptp_tx_hang (err 0) [ 22.492289] i40e: Unknown symbol i40e_alloc_vfs (err 0) [ 22.492888] i40e: Unknown symbol i40e_pci_sriov_configure (err 0) [ 22.493610] i40e: Unknown symbol i40e_ptp_alloc_pins (err 0) [ 22.494283] i40e: Unknown symbol i40e_ptp_init (err 0) [ 22.494870] i40e: Unknown symbol i40e_ndo_get_vf_config (err 0) [ 22.495561] i40e: Unknown symbol i40e_vc_notify_reset (err 0) [ 22.496239] i40e: Unknown symbol i40e_get_vf_stats (err 0) [ 22.496904] i40e: Unknown symbol i40e_restore_all_vfs_msi_state (err 0) [ 22.497724] i40e: Unknown symbol i40e_ptp_rx_hwtstamp (err 0) [ 22.498482] i40e: Unknown symbol i40e_ptp_tx_hwtstamp (err 0) [ 22.499217] i40e: Unknown symbol i40e_vc_notify_vf_reset (err 0) [ 22.499957] i40e: Unknown symbol i40e_reset_vf (err 0) [ 22.500590] i40e: Unknown symbol i40e_ptp_get_ts_config (err 0) [ 22.501361] i40e: Unknown symbol i40e_restore_ingress_egress_mirror (err 0) [ 22.502276] i40e: Unknown symbol i40e_ptp_save_hw_time (err 0) [ 22.502989] i40e: Unknown symbol i40e_ndo_set_vf_bw (err 0) [ 22.503689] i40e: Unknown symbol i40e_vc_process_vflr_event (err 0) [ 22.504461] i40e: Unknown symbol i40e_ndo_set_vf_link_state (err 0) [ 22.505184] i40e: Unknown symbol i40e_ndo_set_vf_trust (err 0) [ 22.505935] i40e: Unknown symbol i40e_vc_notify_link_state (err 0) [ 22.506833] i40e: Unknown symbol i40e_ptp_set_pins_ioctl (err 0) ... [FAILED] :: Loading module sunrpc[ 22.533665] RPC: Registered named UNIX socket transport module. [ 22.534934] RPC: Registered udp transport module. [ 22.536088] RPC: Registered tcp transport module. [ 22.536855] RPC: Registered tcp NFSv4.1 backchannel transport module. ... [ OK ] :: Loading module grace ... [ OK ] :: Loading module lockd ... [ OK ] :: Loading module nfs ... [ OK ] :: Loading module nfsv3 ... [ OK ] :: Loading module leds-lp3943 ... [ OK ] Edited April 30, 2023 by Peter Suh Quote Link to comment Share on other sites More sharing options...
wjz304 Posted April 30, 2023 Share #32 Posted April 30, 2023 On 4/26/2023 at 8:22 PM, pipsen said: Already tested with 7.2 RC -> works like charm! Thank you @wjz304 I'm sorry, due to the high restrictions on email and IP, so I often cannot reply. If you have any questions, you can find me on github, Quote Link to comment Share on other sites More sharing options...
Peter Suh Posted May 2, 2023 Share #33 Posted May 2, 2023 Official distribution of DSM 7.2-64551 RC version to M SHELL for TCRP has been completed. During the DSM 7.2 RC installation process, the automatic installation of the latest version of DSM still has problems, so a file corruption message appears. If you download and install DSM manually, there is no problem. Thanks @wjz304 1 1 Quote Link to comment Share on other sites More sharing options...
Orphée Posted May 3, 2023 Share #34 Posted May 3, 2023 (edited) Hi guys, Did you succeed to play with new disk encryption feature on 7.2 ? I will be careful with what i'm about to write "BUT" It "seems" I can't enable it if Syno is connected to internet... From /var/log/synoscgi.log synoscgi_SYNO.Storage.CGI.Volume_1_get_recovery_key[15354]: resource_internal_lib.c:404 Space resource: register type [volume_id], 1=acquired synoscgi_SYNO.Storage.CGI.Volume_1_get_recovery_key[15354]: resource_internal_lib.c:475 Space resource: release type [volume_id], 1= synoscgi_SYNO.Storage.CGI.Volume_1_create[15607]: resource_internal_lib.c:404 Space resource: register type [volume_id], 1=acquired synoscgi_SYNO.Storage.CGI.Volume_1_create[15607]: resource_internal_lib.c:404 Space resource: register type [pool_vg_id], 1=acquired synoscgi_SYNO.Storage.CGI.Volume_1_create[15607]: resource_internal_lib.c:404 Space resource: register type [pool_id], 1=acquired synoscgi_SYNO.Storage.CGI.Volume_1_create[15607]: space_disk_data_partition_clean.c:42 [Info] Clean data partition on /dev/sda synoscgi_SYNO.Storage.CGI.Volume_1_create[15645]: space_disk_data_partition_create.c:145 [Info] Clean data partition on [/dev/sda] synoscgi_SYNO.Storage.CGI.Volume_1_create[15645]: space_disk_data_partition_create.c:149 [Info] Create primary data partition version [9] on [/dev/sda] synoscgi_SYNO.Storage.CGI.Volume_1_create[15607]: resource_internal_lib.c:404 Space resource: register type [md_id], 2=acquired synoscgi_SYNO.Storage.CGI.Volume_1_create[15607]: space_create.c:953 [Info] Create RAID: /dev/md2, RAID level: 32, device items: 1 synoscgi_SYNO.Storage.CGI.Volume_1_create[15607]: resource_internal_lib.c:404 Space resource: register type [md_id], 2=preserved_976901 synoscgi_SYNO.Storage.CGI.Volume_1_create[15607]: resource_internal_lib.c:524 Space resource: register type [md_id], 2=xxxxx:xxxxx:xxxxx:xxxxx synoscgi_SYNO.Storage.CGI.Volume_1_create[15607]: resource_internal_lib.c:404 Space resource: register type [pool_vg_id], 1=preserved_976901 synoscgi_SYNO.Storage.CGI.Volume_1_create[15607]: resource_internal_lib.c:524 Space resource: register type [pool_vg_id], 1=hidden_key synoscgi_SYNO.Storage.CGI.Volume_1_create[15607]: resource_internal_lib.c:404 Space resource: register type [pool_id], 1=/dev/vg1 synoscgi_SYNO.Storage.CGI.Volume_1_create[15607]: flashcache_create.c:86 Create Cache: /usr/bin/flashcache_create -n 12 -s 324009984 -p dummy cachedev_0 none /dev/vg1/volume_1 synoscgi_SYNO.Storage.CGI.Volume_1_create[15607]: flashcache_create.c:122 SpaceCommand:command="/usr/bin/flashcache_create -n 12 -s 324009984 -p dummy cachedev_0 none /dev/vg1/volume_1" Error="" synoscgi_SYNO.Storage.CGI.Volume_1_create[15607]: key_vault_autounlock_key.c:121 Failed to get on machine key synoscgi_SYNO.Storage.CGI.Volume_1_create[15607]: encvolume_lib.cpp:171 Failed to add key with passwd into vault for [/volume1] synoscgi_SYNO.Storage.CGI.Volume_1_create[15607]: VolumeManager.cpp:1815 Failed on add key into key vault for [/volume1] synoscgi_SYNO.Storage.CGI.Volume_1_create[15607]: resource_internal_lib.c:475 Space resource: release type [volume_id], 1= synoscgi_SYNO.Storage.CGI.Volume_1_create[15607]: VolumeManagerApi.cpp:164 Fail to create volume Whereas blocking internet access to Syno before the very first boot after DSM PAT download and reboot : synoscgi_SYNO.Core.Promotion.Info_1_is_AMFA_enabled[20361]: SYNO.Core.Promotion.Info.cpp:83 authenticator_cred doesn't exist. synoscgi_SYNO.Storage.CGI.Volume_1_get_recovery_key[21092]: resource_internal_lib.c:404 Space resource: register type [volume_id], 1=acquired synoscgi_SYNO.Storage.CGI.Volume_1_get_recovery_key[21092]: resource_internal_lib.c:475 Space resource: release type [volume_id], 1= synoscgi_SYNO.Storage.CGI.Volume_1_create[21422]: resource_internal_lib.c:404 Space resource: register type [volume_id], 1=acquired synoscgi_SYNO.Storage.CGI.Volume_1_create[21422]: resource_internal_lib.c:404 Space resource: register type [pool_vg_id], 1=acquired synoscgi_SYNO.Storage.CGI.Volume_1_create[21422]: resource_internal_lib.c:404 Space resource: register type [pool_id], 1=acquired synoscgi_SYNO.Storage.CGI.Volume_1_create[21422]: space_disk_data_partition_clean.c:42 [Info] Clean data partition on /dev/sda synoscgi_SYNO.Storage.CGI.Volume_1_create[21466]: space_disk_data_partition_create.c:145 [Info] Clean data partition on [/dev/sda] synoscgi_SYNO.Storage.CGI.Volume_1_create[21466]: space_disk_data_partition_create.c:149 [Info] Create primary data partition version [9] on [/dev/sda] synoscgi_SYNO.Storage.CGI.Volume_1_create[21422]: resource_internal_lib.c:404 Space resource: register type [md_id], 2=acquired synoscgi_SYNO.Storage.CGI.Volume_1_create[21422]: space_create.c:953 [Info] Create RAID: /dev/md2, RAID level: 32, device items: 1 synoscgi_SYNO.Storage.CGI.Volume_1_create[21422]: resource_internal_lib.c:404 Space resource: register type [md_id], 2=preserved_691756 synoscgi_SYNO.Storage.CGI.Volume_1_create[21422]: resource_internal_lib.c:524 Space resource: register type [md_id], 2=xxxx:xxxxx:xxxx:xxxx synoscgi_SYNO.Storage.CGI.Volume_1_create[21422]: resource_internal_lib.c:404 Space resource: register type [pool_vg_id], 1=preserved_691756 synoscgi_SYNO.Storage.CGI.Volume_1_create[21422]: resource_internal_lib.c:524 Space resource: register type [pool_vg_id], 1=hidden_key synoscgi_SYNO.Storage.CGI.Volume_1_create[21422]: resource_internal_lib.c:404 Space resource: register type [pool_id], 1=/dev/vg1 synoscgi_SYNO.Storage.CGI.Volume_1_create[21422]: flashcache_create.c:86 Create Cache: /usr/bin/flashcache_create -n 12 -s 324009984 -p dummy cachedev_0 none /dev/vg1/volume_1 synoscgi_SYNO.Storage.CGI.Volume_1_create[21422]: flashcache_create.c:122 SpaceCommand:command="/usr/bin/flashcache_create -n 12 -s 324009984 -p dummy cachedev_0 none /dev/vg1/volume_1" Error="" synoscgi_SYNO.Storage.CGI.Volume_1_create[21422]: resource_internal_lib.c:404 Space resource: register type [volume_id], 1=preserved_474330 synoscgi_SYNO.Storage.CGI.Volume_1_create[21422]: volume_fsuuid_mapping_delete.c:37 Failed to delete fsuuid mapping synoscgi_SYNO.Storage.CGI.Volume_1_create[21422]: resource_internal_lib.c:524 Space resource: register type [volume_id], 1=xxxx-xxxx-xxxx-xxxx-xxxx synoscgi_SYNO.Storage.CGI.Volume_1_create[21422]: space_volume_encrypted_check.c:154 Failed to get space info by reference path [] synoscgi_SYNO.Backup.Config.AutoBackup_1_list[22904]: config_autobackup_common.cpp:301 WARN: cannot get syno account info, code = 3 synoscgi_SYNO.Backup.Config.AutoBackup_1_list[22904]: config_autobackup.cpp:656 Synology Account is not login when list version synoscgi_SYNO.Storage.CGI.Spare_1_list[22953]: synocgi.c:2938 get uid [@administrators] failed. [0x1D00 user_get.c:180] If contected to internet, the volume creation fails and goes "critical" in red... Edit : It may actually be a false positive, I don't understand why I had those errors, I can't reproduce it now. Apart from this regarding 7.2 RC : I can see quite often in the logs : [ 174.892336] vfat: synoboot2 mounted, process=updater [ 174.909341] FAT-fs (synoboot2): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 174.911224] synoboot2 unmounted, process=updater [ 174.917745] ext2: synoboot2 mounted, process=updater [ 174.918929] vfat: synoboot2 mounted, process=updater [ 174.933457] FAT-fs (synoboot2): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 174.935619] synoboot2 unmounted, process=updater [ 174.943845] ext2: synoboot2 mounted, process=updater [ 174.944923] vfat: synoboot2 mounted, process=updater [ 174.955791] FAT-fs (synoboot2): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 174.972969] synoboot2 unmounted, process=updater [ 174.980816] ext2: synoboot2 mounted, process=updater [ 174.982115] vfat: synoboot2 mounted, process=updater [ 174.991736] FAT-fs (synoboot2): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. And the /var/log/messages is flooded by : coredump[18675]: Process scemd[18661](/usr/syno/bin/scemd) dumped core on signal [6]. Core file [/var/crash/@scemd.synology_broadwellnk_3622xs+.64551.core.gz]. Cmdline [/usr/syno/bin/scemd ] coredump[18675]: Core file [/var/crash/@scemd.synology_broadwellnk_3622xs+.64551.core.gz] size [1220649] coredump[18735]: Process scemd[18718](/usr/syno/bin/scemd) dumped core on signal [6]. Core file [/var/crash/@scemd.synology_broadwellnk_3622xs+.64551.core.gz]. Cmdline [/usr/syno/bin/scemd ] coredump[18735]: Core file [/var/crash/@scemd.synology_broadwellnk_3622xs+.64551.core.gz] size [1214423] Edited May 4, 2023 by Orphée Quote Link to comment Share on other sites More sharing options...
pipsen Posted May 3, 2023 Share #35 Posted May 3, 2023 On 4/26/2023 at 2:20 PM, smilenkovski said: @wjz304 I saw that You have recent updates on github, are You preparing for RC 7.2? RC 7.2 is already working with wjz304's build for some days. I've got another question: Did anybody succeed to manually build a img-file based on a git clone of fbelavenuto/arpl and pocopico/tinycore-redpill ? Obviously, both have already implemented RC7.2 but not yet released yet. If yes: Could you maybe give a detailed description incl. build environment, how you succeeded? Thank you! Quote Link to comment Share on other sites More sharing options...
davurleon Posted May 3, 2023 Share #36 Posted May 3, 2023 (edited) Hi! I downloaded wjz304/arpl-i18n, but it will not boot on MBR, is there a version of it that will? I tried writing with 3 different IMG writing softwares, it will not read it on boot. I have a Microserver G8. I have no idea how to follow the Chinese text, could someone just write how to do it in a simple way, please? 😊 Edited May 3, 2023 by davurleon Quote Link to comment Share on other sites More sharing options...
Peter Suh Posted May 4, 2023 Share #37 Posted May 4, 2023 (edited) 8 hours ago, pipsen said: RC 7.2 is already working with wjz304's build for some days. I've got another question: Did anybody succeed to manually build a img-file based on a git clone of fbelavenuto/arpl and pocopico/tinycore-redpill ? Obviously, both have already implemented RC7.2 but not yet released yet. If yes: Could you maybe give a detailed description incl. build environment, how you succeeded? Thank you! Solution for tcrp 7.2 RC is here. https://xpenology.com/forum/topic/68047-synology-dsm-72-beta/?do=findComment&comment=442617 Installation image of tcrp link is here. https://github.com/PeterSuh-Q3/tinycore-redpill/releases/tag/v0.9.4.3-2 Edited May 4, 2023 by Peter Suh Quote Link to comment Share on other sites More sharing options...
Peter Suh Posted May 4, 2023 Share #38 Posted May 4, 2023 8 hours ago, davurleon said: Hi! I downloaded wjz304/arpl-i18n, but it will not boot on MBR, is there a version of it that will? I tried writing with 3 different IMG writing softwares, it will not read it on boot. I have a Microserver G8. I have no idea how to follow the Chinese text, could someone just write how to do it in a simple way, please? 😊 Solution for tcrp 7.2 RC is here. https://xpenology.com/forum/topic/68047-synology-dsm-72-beta/?do=findComment&comment=442617 Installation image of tcrp link is here. https://github.com/PeterSuh-Q3/tinycore-redpill/releases/tag/v0.9.4.3-2 Quote Link to comment Share on other sites More sharing options...
Orphée Posted May 4, 2023 Share #39 Posted May 4, 2023 (edited) I am very curious to know if someone else played with volume encryption... I'm still having issues while testing it from scratch... I still think there might be an issue when DSM has internet access... Some kind of check, maybe related to dlid backdoor... synoscgi_SYNO.Storage.CGI.Volume_1_get_recovery_key[16447]: resource_internal_lib.c:404 Space resource: register type [volume_id], 1=acquired synoscgi_SYNO.Storage.CGI.Volume_1_get_recovery_key[16447]: resource_internal_lib.c:475 Space resource: release type [volume_id], 1= synoscgi_SYNO.Storage.CGI.Volume_1_create[16479]: resource_internal_lib.c:404 Space resource: register type [volume_id], 1=acquired synoscgi_SYNO.Storage.CGI.Volume_1_create[16479]: resource_internal_lib.c:404 Space resource: register type [pool_vg_id], 1=acquired synoscgi_SYNO.Storage.CGI.Volume_1_create[16488]: resource_internal_lib.c:404 Space resource: register type [pool_id], 1=acquired synoscgi_SYNO.Storage.CGI.Volume_1_create[16488]: space_disk_data_partition_clean.c:42 [Info] Clean data partition on /dev/sda synoscgi_SYNO.Storage.CGI.Volume_1_create[16496]: space_disk_data_partition_create.c:145 [Info] Clean data partition on [/dev/sda] synoscgi_SYNO.Storage.CGI.Volume_1_create[16496]: space_disk_data_partition_create.c:149 [Info] Create primary data partition version [9] on [/dev/sda] synoscgi_SYNO.Storage.CGI.Volume_1_create[16488]: resource_internal_lib.c:404 Space resource: register type [md_id], 2=acquired synoscgi_SYNO.Storage.CGI.Volume_1_create[16488]: space_create.c:953 [Info] Create RAID: /dev/md2, RAID level: 32, device items: 1 synoscgi_SYNO.Storage.CGI.Volume_1_create[16488]: resource_internal_lib.c:404 Space resource: register type [md_id], 2=preserved_51xxx3 synoscgi_SYNO.Storage.CGI.Volume_1_create[16488]: resource_internal_lib.c:524 Space resource: register type [md_id], 2=8fd4642d:xxxxxx:xxxxxx:xxxxxx synoscgi_SYNO.Storage.CGI.Volume_1_create[16488]: resource_internal_lib.c:404 Space resource: register type [pool_vg_id], 1=preserved_1xxx synoscgi_SYNO.Storage.CGI.Volume_1_create[16488]: resource_internal_lib.c:524 Space resource: register type [pool_vg_id], 1=hidden_key synoscgi_SYNO.Storage.CGI.Volume_1_create[16488]: resource_internal_lib.c:404 Space resource: register type [pool_id], 1=/dev/vg1 synoscgi_SYNO.Storage.CGI.Volume_1_create[16488]: flashcache_create.c:86 Create Cache: /usr/bin/flashcache_create -n 12 -s 198180864 -p dummy cachedev_0 none /dev/vg1/volume_1 synoscgi_SYNO.Storage.CGI.Volume_1_create[16488]: flashcache_create.c:122 SpaceCommand:command="/usr/bin/flashcache_create -n 12 -s 198180864 -p dummy cachedev_0 none /dev/vg1/volume_1" Error="" synoscgi_SYNO.Storage.CGI.Storage_1_load_info[16720]: StorageManager.cpp:495 Failed to get m2 card list synoscgi_SYNO.Storage.CGI.Volume_1_create[16488]: utils_luksdev.c:42 Failed to do cryptsetup, result = [1024] synoscgi_SYNO.Storage.CGI.Volume_1_create[16488]: utils_luksdev.c:236 Failed to open luks device [/dev/mapper/cachedev_0] synoscgi_SYNO.Storage.CGI.Volume_1_create[16488]: encvol_create.c:158 Failed to unlock [/volume1] with data encryption key, delete the wrong key synoscgi_SYNO.Storage.CGI.Volume_1_create[16488]: virtual_space_implement.c:2094 Failed to create encryption volume layer synoscgi_SYNO.Storage.CGI.Volume_1_create[16488]: virtual_space_create_all.c:102 Failed to create layer [ENC_VOLUME] on device [/dev/mapper/cachedev_0] of space [/dev/vg1/volume_1], ret=-1 synoscgi_SYNO.Storage.CGI.Volume_1_create[16488]: virtual_space_implement.c:714 No cache config, ssd path=none mode=6 synoscgi_SYNO.Storage.CGI.Volume_1_create[16488]: flashcache_unload.c:115 Unload Cache: /sbin/dmsetup remove --retry cachedev_0 synoscgi_SYNO.Storage.CGI.Volume_1_create[16488]: flashcache_unload.c:153 Success to unload [cachedev_0] synoscgi_SYNO.Storage.CGI.Volume_1_create[16488]: flashcache_unload.c:158 SpaceCommand:command="/sbin/dmsetup remove --retry cachedev_0" Error="" synoscgi_SYNO.Storage.CGI.Volume_1_create[16488]: virtual_space_implement.c:729 Remove dummy cache synoscgi_SYNO.Storage.CGI.Volume_1_create[16488]: virtual_space_implement.c:776 No need to release SSD ID synoscgi_SYNO.Storage.CGI.Volume_1_create[16488]: space_create.c:284 failed to create virtual space on /dev/vg1/volume_1. [0x2000 file_get_key_value.c:80] synoscgi_SYNO.Storage.CGI.Volume_1_create[16488]: space_lib.cpp:2612 failed to alloc lv for /volume1 on /dev/vg1 synoscgi_SYNO.Storage.CGI.Volume_1_create[16488]: resource_internal_lib.c:475 Space resource: release type [volume_id], 1= synoscgi_SYNO.Storage.CGI.Volume_1_create[16488]: resource_internal_lib.c:475 Space resource: release type [pool_id], 1= synoscgi_SYNO.Storage.CGI.Spare_1_list[16810]: synocgi.c:2938 get uid [@administrators] failed. [0x1D00 user_get.c:180] Tried to clean dlid.status, rebooted, nothing works, I can't create a volume : But again, it "seems" if DSM never had internet access before volume creation, then it works... Or there is something I don't catch that some times make it works, some times not. Edited May 4, 2023 by Orphée Quote Link to comment Share on other sites More sharing options...
pocopico Posted May 4, 2023 Share #40 Posted May 4, 2023 2 hours ago, Orphée said: I am very curious to know if someone else played with volume encryption... I'm still having issues while testing it from scratch... I still think there might be an issue when DSM has internet access... Some kind of check, maybe related to dlid backdoor... synoscgi_SYNO.Storage.CGI.Volume_1_get_recovery_key[16447]: resource_internal_lib.c:404 Space resource: register type [volume_id], 1=acquired synoscgi_SYNO.Storage.CGI.Volume_1_get_recovery_key[16447]: resource_internal_lib.c:475 Space resource: release type [volume_id], 1= synoscgi_SYNO.Storage.CGI.Volume_1_create[16479]: resource_internal_lib.c:404 Space resource: register type [volume_id], 1=acquired synoscgi_SYNO.Storage.CGI.Volume_1_create[16479]: resource_internal_lib.c:404 Space resource: register type [pool_vg_id], 1=acquired synoscgi_SYNO.Storage.CGI.Volume_1_create[16488]: resource_internal_lib.c:404 Space resource: register type [pool_id], 1=acquired synoscgi_SYNO.Storage.CGI.Volume_1_create[16488]: space_disk_data_partition_clean.c:42 [Info] Clean data partition on /dev/sda synoscgi_SYNO.Storage.CGI.Volume_1_create[16496]: space_disk_data_partition_create.c:145 [Info] Clean data partition on [/dev/sda] synoscgi_SYNO.Storage.CGI.Volume_1_create[16496]: space_disk_data_partition_create.c:149 [Info] Create primary data partition version [9] on [/dev/sda] synoscgi_SYNO.Storage.CGI.Volume_1_create[16488]: resource_internal_lib.c:404 Space resource: register type [md_id], 2=acquired synoscgi_SYNO.Storage.CGI.Volume_1_create[16488]: space_create.c:953 [Info] Create RAID: /dev/md2, RAID level: 32, device items: 1 synoscgi_SYNO.Storage.CGI.Volume_1_create[16488]: resource_internal_lib.c:404 Space resource: register type [md_id], 2=preserved_51xxx3 synoscgi_SYNO.Storage.CGI.Volume_1_create[16488]: resource_internal_lib.c:524 Space resource: register type [md_id], 2=8fd4642d:xxxxxx:xxxxxx:xxxxxx synoscgi_SYNO.Storage.CGI.Volume_1_create[16488]: resource_internal_lib.c:404 Space resource: register type [pool_vg_id], 1=preserved_1xxx synoscgi_SYNO.Storage.CGI.Volume_1_create[16488]: resource_internal_lib.c:524 Space resource: register type [pool_vg_id], 1=hidden_key synoscgi_SYNO.Storage.CGI.Volume_1_create[16488]: resource_internal_lib.c:404 Space resource: register type [pool_id], 1=/dev/vg1 synoscgi_SYNO.Storage.CGI.Volume_1_create[16488]: flashcache_create.c:86 Create Cache: /usr/bin/flashcache_create -n 12 -s 198180864 -p dummy cachedev_0 none /dev/vg1/volume_1 synoscgi_SYNO.Storage.CGI.Volume_1_create[16488]: flashcache_create.c:122 SpaceCommand:command="/usr/bin/flashcache_create -n 12 -s 198180864 -p dummy cachedev_0 none /dev/vg1/volume_1" Error="" synoscgi_SYNO.Storage.CGI.Storage_1_load_info[16720]: StorageManager.cpp:495 Failed to get m2 card list synoscgi_SYNO.Storage.CGI.Volume_1_create[16488]: utils_luksdev.c:42 Failed to do cryptsetup, result = [1024] synoscgi_SYNO.Storage.CGI.Volume_1_create[16488]: utils_luksdev.c:236 Failed to open luks device [/dev/mapper/cachedev_0] synoscgi_SYNO.Storage.CGI.Volume_1_create[16488]: encvol_create.c:158 Failed to unlock [/volume1] with data encryption key, delete the wrong key synoscgi_SYNO.Storage.CGI.Volume_1_create[16488]: virtual_space_implement.c:2094 Failed to create encryption volume layer synoscgi_SYNO.Storage.CGI.Volume_1_create[16488]: virtual_space_create_all.c:102 Failed to create layer [ENC_VOLUME] on device [/dev/mapper/cachedev_0] of space [/dev/vg1/volume_1], ret=-1 synoscgi_SYNO.Storage.CGI.Volume_1_create[16488]: virtual_space_implement.c:714 No cache config, ssd path=none mode=6 synoscgi_SYNO.Storage.CGI.Volume_1_create[16488]: flashcache_unload.c:115 Unload Cache: /sbin/dmsetup remove --retry cachedev_0 synoscgi_SYNO.Storage.CGI.Volume_1_create[16488]: flashcache_unload.c:153 Success to unload [cachedev_0] synoscgi_SYNO.Storage.CGI.Volume_1_create[16488]: flashcache_unload.c:158 SpaceCommand:command="/sbin/dmsetup remove --retry cachedev_0" Error="" synoscgi_SYNO.Storage.CGI.Volume_1_create[16488]: virtual_space_implement.c:729 Remove dummy cache synoscgi_SYNO.Storage.CGI.Volume_1_create[16488]: virtual_space_implement.c:776 No need to release SSD ID synoscgi_SYNO.Storage.CGI.Volume_1_create[16488]: space_create.c:284 failed to create virtual space on /dev/vg1/volume_1. [0x2000 file_get_key_value.c:80] synoscgi_SYNO.Storage.CGI.Volume_1_create[16488]: space_lib.cpp:2612 failed to alloc lv for /volume1 on /dev/vg1 synoscgi_SYNO.Storage.CGI.Volume_1_create[16488]: resource_internal_lib.c:475 Space resource: release type [volume_id], 1= synoscgi_SYNO.Storage.CGI.Volume_1_create[16488]: resource_internal_lib.c:475 Space resource: release type [pool_id], 1= synoscgi_SYNO.Storage.CGI.Spare_1_list[16810]: synocgi.c:2938 get uid [@administrators] failed. [0x1D00 user_get.c:180] Tried to clean dlid.status, rebooted, nothing works, I can't create a volume : But again, it "seems" if DSM never had internet access before volume creation, then it works... Or there is something I don't catch that some times make it works, some times not. FYI, In 7.2 you have the option to use shared folder encryption and shared folder WORM options. Quote Link to comment Share on other sites More sharing options...
pipsen Posted May 7, 2023 Share #41 Posted May 7, 2023 Did anybody already test the new feature with volume encryption and external kmip-server? I tested this deployment (https://github.com/rnurgaliyev/kmip-server-dsm) with Synology's first beta 7.2 and it was working like a charm. No I installed 7.2 RC (7.2-64551) and kmip-server on a raspberry pi and I have following behaviour: kmip server deployment working paring with kmip client working enabling kmip server in global settings => successful connected, all status green But after reboot, I get critical warning that volume could not be decrypted, while kmip server still shows green / connected. When I try to manual initiate the decrypt, I have to upload the recovery key. I had a look into kmip-server's logfile: when I initially connect => only positive log results when I try "check connection" => only positive log results but after reboot of Synology client: no log file entry,.. just nothing Seems that Synology has a bug in the RC firmware version, that no request is sent to kmip-server? When using local key vault, the automatic decryption is working. Can somebody confirm this maybe? Do you have the same problem? Quote Link to comment Share on other sites More sharing options...
Trabalhador Anonimo Posted May 8, 2023 Share #42 Posted May 8, 2023 (edited) Hardware: Asus M5A78L-m/br: I could install TCRP with friend using ARPL, build a loader for 3622xs+ (with friend), reboot and find synology works. after upload .PAT file, the network went dead. On "System info" screen it keep saying that I need extension r8168. Is this a external module? - Forget this. Without friend it works without friend, as before on 7.1.1.x. it seams that the parameters SataPortMap is empty on grub.json. Is this correct? This hardware has 6 sata ports and on 7.1.1.x I could only use 5. On this 7.2 I can use all 6 ones. 😁 Is there a way to upgrade from 7.1.1 to 7.2? Edited May 8, 2023 by Trabalhador Anonimo Quote Link to comment Share on other sites More sharing options...
Trabalhador Anonimo Posted May 9, 2023 Share #43 Posted May 9, 2023 This is AMD hardware where I had problems with reserved memory. I did not have to insert any memory command on grub file to see this: 😁 Quote Link to comment Share on other sites More sharing options...
Trabalhador Anonimo Posted May 16, 2023 Share #44 Posted May 16, 2023 (edited) I was installing 7.2RC to a new hardware, where I know "with friend" does not work, using mshell (tinycore-redpill.v0.9.4.3-2.m-shell). I had chosen "JOT before friend", but at the middle of the process of build the loader, this message comes out "bring my friend..." and after the process finished and reboot, no network activity. I could not find the box. Any suggestions? Edited May 16, 2023 by Trabalhador Anonimo Quote Link to comment Share on other sites More sharing options...
Trabalhador Anonimo Posted May 16, 2023 Share #45 Posted May 16, 2023 (edited) I tried m.shell "with friend" option and changed something on dev mode, and it worked. Edited May 16, 2023 by Trabalhador Anonimo Quote Link to comment Share on other sites More sharing options...
Trabalhador Anonimo Posted May 16, 2023 Share #46 Posted May 16, 2023 I had to use EUDEV to make network card to start. Quote Link to comment Share on other sites More sharing options...
Trabalhador Anonimo Posted May 17, 2023 Share #47 Posted May 17, 2023 21 hours ago, Trabalhador Anonimo said: I had to use EUDEV to make network card to start. Wrong, I had to use DDSML to make it work. Quote Link to comment Share on other sites More sharing options...
smilenkovski Posted May 22, 2023 Author Share #48 Posted May 22, 2023 Quote Link to comment Share on other sites More sharing options...
XPEH Posted May 22, 2023 Share #49 Posted May 22, 2023 It's a final stable release now. https://www.synology.com/en-uk/releaseNote/DSM?model=DS1621%2B#7_2 Quote Link to comment Share on other sites More sharing options...
dj_nsk Posted May 22, 2023 Share #50 Posted May 22, 2023 1 час назад, XPEH сказал: It's a final stable release now. who will be the first to try to upgrade? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.