davurleon

Hi! I downloaded wjz304/arpl-i18n, but it will not boot on MBR, is there a version of it that will? I tried writing with 3 different IMG writing softwares, it will not read it on boot. I have a Microserver G8. I have no idea how to follow the Chinese text, could someone just write how to do it in a simple way, please? 😊

Hi! I have just installed DSM 6.1.4 and suddenly Sabnzbd, Sonarr and Radarr cannot start, they were running fine before the install, is something broken with the new DSM?

Also we need to know if you were running SHR or RAID? If you were running SHR it will not accept a disk that is not at least the same size or bigger than the smallest in the current volume.

Hi! This is a total noob question, I have had a Xpenology server running for years now and I somehow made a silly move and deleted it all... Well, I reinstalled, it boots perfectly and I am setting up users and whatever is needed (Sonarr, Radarr, etc.) and here I get this stupid problem of user access problems. If I try to use Filebot Node it gets an error that it may not access the folder even though I have given rights to this folder to the current user...so my question is, would anybody like to help me setting up a "easy to use user hierarchy" and folder structure with correct rights for mostly downloading with the above mentioned programs? Thanks for all your help so far!

So incredibly silly, I had chosen to make the harddrives JBOD on my RAID card in an earlier installation, it was this that made them not able to be added to the server... Something learnt today!

Hi again I have a modded BIOS yes, set to ACHI. The really weird part is that I tried booting the server with Windows 10 and if I run Device Manager there it says that the HDDs 2-4 are "offline" somehow, never seen that before...

I have already enabled SHR, it seems as if disks 2-4 are on "non-working" ports or something, can I have made some mistake setting up the BIOS of my N36L?

Hi! I have recently deleted all of my disks by error and now need to setup this server anew, however, even though I am using Jun's 1.0b and it boots and seems to be working, somehow I cannot add disks 2-4 to my SHR. They are added, and then dissappear just for the system to say that it failed, the only disk I can connect and make the system on is nr. 1, I even tried switching them around and still only nr. 1 can be made to work, what can have gone wrong? I did switch off C1E of course, and the server is reachable I just cannot add disks.

Hi IG-88 I am sorry if I entered a discussion on the wrong terms, I tried your version 2 of the extra.lzma and it didn't really work, but I think that maybe it has to do with the settings in the card itself (it is not sending the disks as JBOD). I'll try your version 3 and see if I fare better, and I do apologize for highjacking this thread!

I have a 3ware 9500S and the thing is that with the extra.lzma that can be found somewhere I can actually see one of the connected HDDs, but I have 3 connected, but with the standard extra.lzma there is no HDD showing up, I think it says that it should be supported though?

Hi, could I also get this extra.lzma? My current RAID card used to work in 1.01 but not anymore, so I am hoping it will work with yours

Hi! This is probably a stupid question, but what is the advantage of using MBR partition?

Hi! I have updated my intel based box from 5.2 to 6.1.2 and now I have this weird error of the updates section not showing up, and other small things that anny me a little bit. Is it possible to "totally reset" DSM and only keep data, so I can start fresh with new installs and such? If so, how would I do this?

You dont need a DS1815+ for SHR support just edit /etc.defaults/synoinfo.conf comment out/delete supportraidgroup="yes" then add support_syno_hybrid_raid="yes" press F5 on you web browser Thanks so much, saved my day

Please, is there any way to make a loader that uses a version that supports SHR natively? Maybe DS1815+ or something like that? I am absolutely willing to test/work on to help, but I am no big linux-whiz I'm afraid...

Have you tried using Rufus in DD-mode?

None?

Hi all! I have the above mentioned server lying around and wanted me some sweet Xpenology on it. To this I wrote in the drivers request and I was happy when I found that the new version just out should support my HP Smart Array P400. However, when I try to install Xpenology it merely says that there are no HDD on the server, I tried both not setting any HDD up in the software for the card, and setting all HDD up as single drives, but to no avail. Does anyone know if I can somehow persuade this HP P400 to let me see the drives, or am I just in no luck with this controller? Yours Sincerely

And I am now wondering if the Smart Array P400 uses the same driver as the P200 that is quoted in the answer about the new version?

Wow, such a fast reply, sounds great, thanks!

Is there a possibility that the HP Smart Array P400 can be made to work?

Really sorry for asking something that is probably a noob question, but I have 2 Xpenology boxes, both on newest version software. On one I have folders for movies, music, TV and such, now I wanted to put them in order and used the new Filebot Node for this, it wants to put them all under Movies, TV Shows, Music and I then wanted this to be under a folder called "media" so I have everything sorted fine, this worked perfectly and now I have a structure with /media/Movies, media/TV Shows, etc. The "media" folder I made just at usual as a shared folder, but the weird thing is I cannot make the subfolders under media visible in either Sabnzbs or Sickbeard, I tried lots of things I think, but nothing helps, anyone have an idea how to solve the problem?

Anyone else have this card? I find it very slow (copying from one Xpenology to another over a 1000Mbit network is only 20-30 Mbytes pr second) and I don't know if I have configured it wrong or if that is the speed I can expect?

Sorry, my bad, I just forgot to initialize the disks in the control panel of the RAID card!

Hi! I have bought one of these RAID controllers, but I cannot make it work with Xpenology, is there anyone out there who can help me make it work?